How will you generate the work schedule in live system

How will you generate the live system
Appreciate for sppedy answer

Your live system must be open for table changes if you want to generate your work schedule rules - this will need to be done by your basis team.
Usually, work schedule rules are generated in development and transported through to production. The generation is performed by using program RPTSHF00 (or transaction code OG00). You generate as a batch with the 'BTCI = ''/online, ='A' or 'E'"field set to E. This will save the generation to a transport. If you have a lot of work schedule rules, you may need to split the generation over more than one transport.
Regards

Similar Messages

How do you reset the Work Area Bar to auto adjust?

This is something that's been a thorn in my side for a while. Maybe I'm just being OCD about it... but I've been wondering if there is a way, once you reposition the I / O points of the Work Area Bar (WAB) you can get Pr to go back to auto adjusting it to the end of your clip.
You can double-click it to get it to expand to the full length of the sequence, if you remember to do that... Sometimes I'm in a rush, or I have 10 sequences and I miss the fact that my WAB is not all the way to the end. I select and batch drag them all to Media Encoder and *POW*... I've forgotten to stretch the Out to end on one sequence ... and I have to re-render. A pain, yes, something I should have double checked, but at 2am these things can get missed.
So, can you get the Work Area Bar to auto adjust again?
If yes, it's probably something ridiculously obvious – but I'll take it!
Thanks
Stephen

I would have an issue with auto or a default for a number of reasons.
Not least this one...
I now place dummy clip ( black video) a distance off the end of my sequence to prevent the End of Sequence Marker displaying at the end of my edited material. I dont want that included in an export.
Here is another...
As I get to lock down and I am sending previews to clients...I insert Black Video head and tail of the edit so that the preview does not start jarringly on first frame video. I have I and Os marked so that I can simply export "Program at length (without black head and tail) when I come to master.
and...
Often I have edit versions (TVCs) on the same time line ( sequence) and I need to adjust WAB or I/Os to export them separately.
Automating stuff to eliminate our dumb moments doesnt help much because it just opens the chance of another dumb moment driven by expectation and forgetfulness. .
Mental checklist is the only way IMHO.

How do you organise the management of your IdM system?

Hi Everyone,
We're just starting off on our IdM project and I'm looking for some help and advice around how you've organised roles and responsibilities for managing your IdM system. Things like:
   - Who is responsible for managing the RunTime environments?
   - Who is responsible for managing the UI infrastructure?
   - Who configures Idm using the MMC?
   - Who configured IdM using the UI?
I'm a basis guy and have built a sandpit environment to get a look at the product and understand a little more about how it works. At the MMC level it seems all or nothing which makes me question who I should let have access to this. Perhaps I should let more people have access to Dev, but not in Test / Live?? And use the system copy mechanism to promote to live.
Personally I see the Basis team managing the Runtime and UI infrastructure. The 'IdM' / security team managing via the UI, but I'm not clear about who to give access to the MMC.
I'd be grateful for any feedback.
Thanks
Gareth

Hello Gareth
This question can give a lot of talk. And there is no right or wrong, as it depends mainly how your organization is structured.
Basically I would not split between DEV/QAS/PRD in terms of authorizations. My view is, that those from the business (eg. Head of Accounting) only get privileges on the UI. For example he can approve all requests, change users and such. All that has to do with DB, MMC and others, should be done by the basis guys. I know this is not always possible, but it would be good if one person could do all the tasks. This is good when you need to solve a problem, but can obviously also lead to other problems in security related issues.

How will you schedule the job in background?

How will you schedule the job in background?

Pls go to this link
http://help.sap.com/saphelp_bw33/helpdata/en/4c/89dc37c7f2d67ae10000009b38f889/frameset.htm
Step by Step
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm
An example of a complex process:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/63073c52619459e10000000a114084/frameset.htm
process chains
process chains
Process chains
http://help.sap.com/saphelp_bw30b/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
Re: Ho to make a variable mandatory or optional?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
Thanks & regards
nath..........

How can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

We need the Request Restart ability when scheduling a single reoccurring job in Redwood. Most of our jobs are scheduled in CHAINs which offers the Final Status Handler on Step level, and the schedule is "paused" when a job in the CHAIN has failed ( the next instance does not populate until the OP MSG has been Replied to) , and once the OPERATOR message is replied to, the CHAIN can resume running again ( desired ) . But we need this same ability when scheduling a single job not in a CHAIN. In our testing, we set up a job with Request Restart chosen on the Error , Killed and Unknown selections on the Restart Behavior Tab. But we found when a job is scheduled say once a day at 8AM, and when it fails, an OPERATOR msg appears allowing a Restart choice ( desired), but the next day's schedule also populates ( undesired) and we do NOT want the schedule to continue on yet because we need a chance to fix the error before the next insance runs for business reasons. So how can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

Hello Fran,
You can wrap the job chain in a master job chain in the first step and set the final status handler there.
You can also set the Restart Behavior to 'Stop Submit Frame', in that case you will have to resubmit the job once you are finished troubleshooting.
Regards Gerben

How do you make imessage work? The icon is there. You can type in the recipient but are not allowed to hit the send button

How do you make imessage work? We upgraded to verision5. The icon is there. You can type the message but the send button is not available.

There is some instability in iMessage. It is a versatile and confusing app even though there are so few options in its use.
I had issues trying to get iMessage work on both my iPads and my iPhone.
ON the iPhone, turning off WiFi service and then trying iMessage fixed the problem.
On the iPad 2, same thing. Turning off WiFi service fixed it.
On the iPad 1, I took a suggestion from zoomzoom and changed the WiFi network configuration on the iPad to use 8.8.8.8 as a DNS server and then use iMessage. That fixed it. Now I put the DNS back to default and it still works.
I suspect the iPod Touch will have the same fix as the iPad.
If you have a WiFi and 3G iPad or iPhone, try turing off WiFi and see if that fixes it.
Why? (beware, some of this is guesswork)
iMessage can talk SMS to cellphones and smartphones (that are using the cell-network). It can also talk Apple iMessage format to iPhones and iPads whether they are on cell-network or on WiFi. If you are talking to an SMS cellphone, iMessage figures that out and blindly sends your message. If you are talking to a iOS5 device, iMessage figures that out too, checks to see that they are on-line, and then does something different if they are or are not on-line. If you type in an email address, and not a phone number, I think iMessage attempts to see if the email address is registered with Apple (or iCloud or whatever) and if it is not, it does something to let you know, possibly by making the Send button not light up.
In order to register iMessage and an email, you have to let the iOS device see whatever service it is that iMessage uses. That is where the problem happenes. zoomzoom suggested manually setting the WiFi DNS to google's 8.8.8.8 IP address, then run IMessage, and that seemed to fix the problem. Setting the iOS device to use 3G-only (by turning off WiFi) also fixed the problem. I suspect going down to StarBucks or McDonalds and using their WiFi would also fix the problem. Once the problem is fixed, it doesn't seem to come back so I can't test these 'fixes'.
To change the DNS on your iPad find your WiFi networks configuration, click on the blue arrow, touch DNS, backspace over the number that is shown, type in 8.8.8.8 Then click on the WiFiNetworks button at the top of the screen. Now go run iMessage. After that, you can delete the DNS entry again and leave it blank. Your iPad will fill it in from the WiFi router when it needs it.

Tried the posted solution for the RETR problem and it works once then it returns. How do you make the change permanent?

Tried the posted solution for the RETR problem and it works once then it returns. Once the email dl'ds the file deleted per the instructions returns. How do you make the change permanent?

Hi DOC808HI
# I don't know what you mean by "posted RETR solution". Could you please post a link to the suggested solution? Perhaps you are referring to this thread: https://support.mozilla.org/en-US/questions/991792 ?
# Anyhow any further troubleshooting information you can provide will be great e.g. Your Operating System Version (XP, 7, Mac OS X Mavericks), your anti-virus if any, your mail provider, your ISP, what you did, what happened with exact error message, what happened
Cheers!
...Roland

HT3576 how do you stop the connect to itunes to use push notifications to stop poping up in my app it will not let me get into the app

how do you stop the connect to itunes to use push notifications to stop poping up in my app it will not let me get into the app

I have had this same issue but thankfully fixed it. Follow he steps below:
Sync your iPhone with you iTunes therefore your info is backed up. Unplug your phone.
Go to Settings > Reset > Erase All Content and Settings
Once your phone has reset and come back on answer the question until it asks if you want to back up from itunes Click this then plug your phone in.
After everything has sync'd back to your phone everything should work fine.
Hope this helps.

When playing songs in iTunes playlist, How do you keep the next song from jumping to next song? I am working on song list updating other tracks info and then the next song starts and I lose my spot in song list?

When playing songs in iTunes playlist, How do you keep the next song from jumping to next song? I am working on song list updating other tracks info and then the next song starts and I lose my spot in song list?

Max OSX 10.6.8, iTunes 11.1
I had a similar problem: I wanted to synch my playlist to my iphone. I like to have my playlist sorted by genre. But under each genre, albums are not sorted by the track numbers. This is a problem, especially when I am listening to club mixes when the DJ smoothly transitions from 1 track sequentially to the next one. Under the properties of each audio file, the Track Numbers and Disc Numbers are already there.
My perfect solution was to turn On Sorting - Sort Album under View>Show View Options. Then, select all the songs in that album (Shift click, Cmd click, etc) , and Edit multiple item information (Cmd I). You will see Info-Video-Sorting-Options buttons. Click on Sorting. Then, under Sort Album, Enter the name of the album. Then OK.
You should now have the playlist sorted by Genre, then each album individually sorted by track numbers. On your playlist you should see, if you scroll right, the column added called "Sort Album".
Hope this helps.

How will you do for November pay roll before release the Note:2082383.

< Japanese translation is below.>
Dear Experts (Especially for Responsible for Japan pay roll),
Please le me know how you will deal with November pay roll before releasing note:2082383.
(The legal change of non-taxable amount of Commuting Allowance for Car.)
Note 2082383 is going to be released by SAP on November 30.
However, Japanese low has effected since October 20 2014.
How will you deal for November pay roll for Japan before note releasing ?
Will you change V_T5J64 table by your self according to Cabinet Order #338?
Or will you just wait until SAP releasing this note ?
Do you think that SAP will provide any report for this recovery way for November pay roll if we wait SAP note releasing ?
Regards,
Mayumi
< Japanese version >
Expertの皆様
先日、官報＃338が出され、10/20 より施行されていると存じます。
SAPの当該ノートは11月30日にしかリリースされないようですが、皆様、11月の給与はどのように行いますか？
V_T5J64を官報の情報に合わせて変更し、当座11月の給与を回しますか？
それともSAPのノートリリースを待ちますか？
SAPのノートリリースでは、11月の給与が古い方法で施行されたことによるリカバリレポートなど出るのでしょうか？
以上、皆様の対応方法をお尋ねいたしたく。
よろしくお願いいたします。
Mayumi

Hi,
Ask SAP directly with regards to the way they will handle this and whether they will produce a report to recover. Speak to the Japanese revenue and explain to them that you are in this predicament and I am sure they will be able to give you a leeway till November, but still be able to report on the Oct figures.
Off course you can try the config changes yourself. Pilot the note in Dev and see if the figures make any sense. But this will be dual work as when the note gets released in Nov you will have to revisit your configs and undergo a complete check. Get in touch with SAP in my opinion!
Aran

In the slide show view how can you pin the "next" Arrow to the ultimate edge so it is in the same place as the full screen image, it will pin to the left edge but not the right.

In the slide show view how can you pin the "next" Arrow to the ultimate edge so it is in the same place as the full screen image, it will pin to the left edge but not the right.

Hello,
Please make sure that the next button is pinned to the right side as there in the attached image.
If it is already pinned, you can try removing any embedded HTML code and checking it.
Regards,
Neha

How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room

How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room?

Welcome to the Apple Community.
Unfortunately the Apple TV doesn't have a web browser so you can't do that.

How do you reactivate the grey utilities scroll up tab at the bottom of the screen that should reveal wifi, bluetooth etc? Doesn't matter what orientation the ipad is in, it won't scroll up from the bottom. All other screen functions work normally.

How do you reactivate the grey utilities scroll up tab at the bottom of the screen that should reveal wifi, bluetooth etc?
Doesn't matter what orientation the ipad is in, it won't scroll up from the bottom.
All other screen functions work normally.

Settings/Control Center. There are two options which are pretty self-explanitory...one enables/disables access on the Lock Screen and one enables/disables access within apps/games.

HT201365 I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?

I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?

Double click home button, then swipe up on app picture (not the icon itself)

How do you get the radio to work ?? - says no radio signal but headphones are plugged in ??

How do you get the radio to work? Is another app or download required? Its a new Ipod nano - 8G, box doesn't say anything about "generation" ?? Appreciate any help
cr8tivsolutions

ok, I see now the plug has to be pushed in really tight until the white is flush with the nano

How will you generate the work schedule in live system

Similar Messages

Maybe you are looking for