How would i know if my battery is DEAD

i have a c6 phone and it has a major sickness not even key shortcuts can turn it on so can anybody tell me if i were able to take my battery out of my phone while charging will it die like it wont be able to work at all like its dead because i took my battery while charging? Cause i tried charging it for several hours but still it wont turn on and when i took it off from charging my phone wont vibrate whenever i turn it on. So does this mean my phone doesnt have a problem or is it just my battery being dead already so does that me do i need to change my battery? please help me nokia agents and nokia users please i really need urgent HELP. Thank YOU!

As a replacement battery is so cheap it is probably worth trying this before seeking service and at the very least you have a new spare, although I doubt that this is the underlying issue upon C6-00.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

How do you know if the battery is dead? Detailed history. Help needed!!

So here's the story.
Bought the PowerBook G4 1.67GHz used off a trusted friend. Worked fine for 3 months or whatever up till yesterday basically.
The charger was in, orange light, but the charger in the corner was going from "Charge" to "15%" and switching (and decreasing) every 3 seconds so it seemed it wasn't really charging it or picking up the signal.
Eventually the thing died, and I thought I'd leave it off and charge (even if it is slowly) so that it will eventually be back up. The screen lid push button was lit up/glowing, so it must've gone into auto sleep.
It wouldn't turn on after that, even around 4 hours later, so I tried pushing in the the charger in a different way just to check and realised if i pushed it one way it would go Green and stay, but if i pushed it another way it would go Orange and stay. Wierd. Was it fully charged or not? It wasn't I think.
Eventually somehow, It seems a bit of charge got to it and I managed to get the Sleep password screen up and entered it in, then quickly shut it down before it depleted whatever was left already.
After this, the charger still did the same Orange / Green thing.
I looked up the problem and found a lot of those PMU reset things, did all of them to no avail. I realised that apparently the actual laptop should be able to support itself and boot without a battery - so I tried that, took out the battery and tried booting a lot of times but nothing happened.
Could it be the logic board? I knew that one of the Memory slots in the PB was actually non functioning so I knew it could be something.. Also another known problem was that a piece of the stupid charger prong on the PB charger broke, inside the laptop, but it was like that for around 6 weeks and always charged still. If it was that I assume that the charger wouldn't pick up a light at all then.
The light is still green on the laptop charger ring, but the laptop does nothing at all I can't afford a new laptop lol. I will give my local Sydney city Apple centre a ring and see if they have alternate batteries / chargers I can try but since its around 2-3 years old, I don't think they'll be able to help.

Fixed!
Took it to the Apple Store. They tried getting the stuck piece out for 20 seconds but to no avail. They searched for a spare battery and found one with charge and it worked fine. Quoted $80AU for the DC In Board and $150AU for the labour to get it fitted and fixed.
Took it home, spent half an hour with two sewing pins and managed to hook it out.
Now going to buy a new charger tomorrow (3rd-Party or Apple brand if out of stock everywhere else) and will be able to take it interstate with me after New Years! Woot woot!
Genius Bar is a huge help. God bless Apple and their customer service team.

How would I know that my phone is not fake?

My iphone4 have a different regulatory logo printed at the back than the usual iPhones here in my country, how would I know that my phone is not fake? i bought it from Thailand but its regolatory logo seems to be 'South Korea'.

These days it is pretty difficult to spot fake ones. You can always compare your specs to the ones listed on Apple's official iPhone page and see if it matches up.
A few things fake iPhones can have that real ones dont: FM Radio, Expandable storage, colors other than black or white, Dual-Sim, stylus use (not compatible with a real iPhone), removable battery, lack of wi-fi or bluetooth. And of course if you can't use it in iTunes, that's a giveaway.

HT1476 How would I know when does the iPod touch completes charging?

Since the iPod touch doesn't display a battery percentage, how would I know when the charging is completed? In iOS 6 and earlier there would be a plugged-in icon meaning that the device is charged, but in iOS 7 there is only one icon that can mean both charging or charged.

Battery icons
The battery indicator icon in the upper-right corner of the screen shows battery charging status and about how much charge is left in the battery. When connected to a power source, a small lightning icon will appear next to the battery icon:
If the battery charge is very low, the device may display a black screen with an empty battery icon, indicating that the battery needs to charge for up to ten minutes before you can use the device. If the battery is extremely low on power, the device may display a black screen for up to two minutes before one of the low-battery images appears; continue to charge the unit for at least 30 minutes or until it is fully charged.
Yes I already saw this article before and this doesn't help ansewering my question. For iOS 6 and earlier, there would be a lightning icon in the battery when it's charging. If it's charged then there would be a plugged-in icon in the battery. However, the lightnight icon besides the battery in iOS 7 stays the same all the time as long as it's plugged into the charger. So I have no idea when does it finishes its charging, as it doesn't even show battery percentage like iPhone does.

How would you know if a ibook motherboard went bad

how would you know
when i plug in the charger it only stays green and will not power on maybe the battery is bad
is my motherboard bad i hope not i hope it is only the charger

It is more likely a bad DC-in board. This is the part of the iBook that houses the port where you plug in the adapter.
Since the green light on the adapter is coming on, that is an indication that the charger is working as it should. If it were dead, you would see no light.
In my experience, an iBook with a bad DC-in board will run from a charged battery, but the iBook will not run when plugged into the adapter, nor will the adapter charge the battery.
The DC-in board in my husband's iBook failed, but we could swap batteries (since I had an iBook, too), and he could use his iBook normally on a charged battery. We swapped batteries repeatedly, allowing my iBook to charge both batteries, until he was able to get his DC-in board replaced.

What is the print program for adobe form MEDRUCK_PO, How would I know that?

Hello All,
I am new to ADOBE forms and I have a requirement to develop a new Purchase Order Adobe Form . I need to confidure output types too. I am copying 'NEU' to 'ZNEU', and form name 'MEDRUCK_PO' to 'ZMEDRUCK_PO', but what would be the program name and form routine? How would I know the program name and form routine for new output type/form combination.
Any kind of help is highly appreciated and rewarded.
Thanks in advance
Abaper

I am working on exactly same thing - customizing pdf form MEDRUCK_PO.
I copied MEDRUCK_PO to Z_MEDRUCK_PO and put my changes into the form.
You will use transaction SPRO to display the current routine and form and put your changes into effect.
SPRO-> click tab SAP Reference Image->Material Management->Purchasing->Messages->Forms(Layout Sets) for Messages->Assign Form and Output program for Purchase Order.
In the Form column change the form name to yours - Z_MEDRUCK_PO for example. You can also change the routine name if you want.
Take a look at SAPFM06P, specifically at includes FM06PE03 and FM06PE04.
You will find routines adobe_entry_neu, adobe_entry_mahn and adobe_entry_aufb in FM06PE03. They call routine adobe_print_output located in FM06PE04.

HT1923 When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.

When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

How would I know if any one post a thread in the Forum

Hi All,
Please tell me how would I know if any body post a thread in the forum??
Regards
krishhna

Hi,
I just read the "Suggestions and comments" forum and I found out that you did create a thread called "How would I know if any one post a thread in the Forum ".... So I knew that some one had posted a thread in the forum...
Regards,
Oliivier

Lost my phone today, is there a locator on it? If yes or no, how would i know?, Lost my phone today, is there a locator on it? If yes or no, how would i know?

How would I know if i had a tracker or locator on my phone if i had one? Do all iphones have one?

If you enabled "Find My iPhone" on the device prior to it being lost, you may be able to track it. This assumes the device is powered on, has a network connection (Wi-Fi or Cellular data), and has not been restored as new by whomever found it.
If you did not enable the feature, the only way to locate the device is to physically start looking for it.

How would i know if a certain screen contains a screen-exit?

The requirement is to add textfield and a checkbox in the additional data tab in standard transaction me21n.
I already found the screen for that area where i will be adding the textfield and the checkbox.
The question is, how would i know that that standard screen contains screen-exit?
Edited by: navi on Apr 18, 2008 10:06 PM

hi yash
your answer is quite helpful.
but is there a way wherein i can trim down the number of hits? like it will just display the screen-exits for MM.
they are way too many and i don't have the leisure of time.
pls advice...
thanks a lot.

CUDA-OPEN CL IS ENABLED - How would I know?

After backing up my working OS, I attempted to try latestSG updates with Mavericks.
I know, what was I thinking...?
Mac Pro Early 2009
32 Gigs Ram
CUDA Version 5.5.28
Nvidia GTX 285
Mavericks
SGworks ok with native SG - LUTs and masks dont kill playback. Lots of caching.
Is it using open CL?
THE QUESTION: HOW WOULD I KNOW IF IT IS?
How can we check if GPU is being ultilised? Unlike all AE,PP, ME and proper adobe apps, SG doesnt give me any indication of whats going on. This is rubbish.
If I grade same clip via Direct link plays back at one fame per second..
Sending a DL'ed grade back to premiere give me no image, just a 'Media Pending Link' - unless I turn off the embedded Lumetri effect.
Could anyone tell me what CUDA drivers I might roll back to to get this working?
I mean, it was tested with a specific set of 'current' drivers, right?
sidenote: After Effects CC also refuses to utilise this card, which is plenty fast for most things.

Same test with Mountain Lion
Mac Pro Early 2009
32 Gigs Ram
CUDA Version 5.5.28
Nvidia GTX 285
Using CUDA in PP, playback was leagues better than Open CL. But still crappy with any sort of mask in play.
Using Direct Link within Speedgrade with Single Primary layer is great.... but utterly unusuable if you add masks. (who does that eh?)
Even if you add empty grading/adjustment layers playback also nosedives, so the hope I had of isolating my masks on separate adjustment layers doesnt help, as it makes working in SG terrible.
You cant really crossfade multiple SG adjustment layers in PP, as the vignettes need to be the same group as the grade for the transition to act it properly (or nested, but that's not the point of this workflow).
When you talk about using Nvidia Cuda GPU accelaration not being available for Speedgrade, how does impact on it's use along the whole pipeline? You need to be clear about where Cuda/CL impacts on performace, and not waste everyone's time discovering the grizzly truth. How many posts are reporting the same problems, again and again.
What if you are outputting your graded edit in Premiere to AME (which also has CUDA/CL options? If I render SG graded edits in AME from Premiere - using Open CL adds about 50% to the rendering times.
Despite having 32gigs of available ram, SG insists on caching to disk - why?
Admit that the performace using masks is Direct Mode is not ready for production, and stop trying to pretend it is.
Update the information links on this forum, as many are out of date, or point to previous versions.

How would i know if my iphone is original?

how would i know if my iphone 4 is original?

Plug the SN in here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do

HT4061 how would i know if the iphone is fake or original using the serial #

how would i know if the iphone is fake or original using the serial #

Connect it to your computer and see if iTunes recognizes and connects with it.

HT1414 How would I know if my phone is unlocked?

I did the onlock for a phone once and I saw a congratulation message in iTunes saying my phone is unlocked. I didn't see the same message for my recent phone. How would I know if my phone is unlocked?

http://support.apple.com/kb/HT5014
Try a new sim not from the carrier who locked the iPhone

How would i know that i have bought a genuine product of sony?

incase i tried to buy from third party store like ebay how would i know that its a genuine sony product?

Get the Previous interval value that is 1 day minus of current interval starting day.
and get value from the table
E.G you have current value like this.
current value
start date : '01.02.2006'
end date " '31.12.9999'
Previous value
start date : '01.11.2005'
end date " '31.12.2006'
Regards,
Wasim Ahmed

How would i know if my battery is DEAD

Similar Messages

Maybe you are looking for