HOWTO: start/stop htmldb processes in Unix

I've installed 10gR2 DB, and then installed HTMLDB from the companion CD. I could access the server no problems, so my configuration is good and working.
The issue is how do I start/stop the processes. It appears (from this forum) that Windows installs create a service but that's of course no good to me as I'm on AIX.
I'm a database guy, not an iAS guy, and it took me a while to figure out the way to make this all work.
First, set your ORACLE_HOME to the HTTP home (not the DB home).
In ORACLE_HOME/opmn/bin is the magic command:
./opmnctl startall
or
./opmnctl stopall
Seems to do the job.

That's almost right - that command will start & stop the Oracle HTTP Server (Apache). If Apache is down, then there is no way to access HTML DB via a web browser. However, users - if they had access - could still access the database, of course.
There is no such thing as the "HTML DB Process", as HTML DB is nothing more than a schema in the database.
Thanks,
- Scott -

Similar Messages

  • System launchd agent error starting/stopping system processes

    I installed PHP 5.4 via brew package manager. I kept the system Apache & configured it to work with this version of PHP rather than the system copy. I used launchctl (sudo launchctl load -w /System/Library/LaunchDaemons/org.apache.httpd.plist) to load apache automatically on boot. I created a Sites folder for Mountain Lion and opened http://localhost/index.php and got the standard PHP 5.4 system config page showing that everything is working fine. I checked my system logs just to be sure nothing was out of the ordinary and I am seeing these errors in my log even though everything seems to be fine and I am not seeing system crashes, slow runtimes, etc:
    9/5/12 2:38:51.292 PM com.apple.launchd[1]: (org.freeradius.radiusd[3055]) Exited with code: 1
    9/5/12 2:38:51.292 PM com.apple.launchd[1]: (org.freeradius.radiusd[3055]) Exited with code: 1
    9/5/12 2:38:51.292 PM com.apple.launchd[1]: (org.freeradius.radiusd) Throttling respawn: Will start in 10 seconds
    9/5/12 2:38:56.686 PM com.apple.launchd[1]: (org.isc.named[3056]) Exited with code: 1
    9/5/12 2:38:56.686 PM com.apple.launchd[1]: (org.isc.named) Throttling respawn: Will start in 10 seconds
    9/5/12 2:39:01.328 PM com.apple.launchd[1]: (org.freeradius.radiusd[3057]) Exited with code: 1
    9/5/12 2:39:01.328 PM com.apple.launchd[1]: (org.freeradius.radiusd) Throttling respawn: Will start in 10 seconds
    9/5/12 2:39:06.700 PM com.apple.launchd[1]: (org.isc.named[3058]) Exited with code: 1
    9/5/12 2:39:06.700 PM com.apple.launchd[1]: (org.isc.named) Throttling respawn: Will start in 10 seconds
    9/5/12 2:39:11.359 PM com.apple.launchd[1]: (org.freeradius.radiusd[3060]) Exited with code: 1
    9/5/12 2:39:11.359 PM com.apple.launchd[1]: (org.freeradius.radiusd) Throttling respawn: Will start in 10 seconds
    9/5/12 2:39:16.715 PM com.apple.launchd[1]: (org.isc.named[3061]) Exited with code: 1
    9/5/12 2:39:16.715 PM com.apple.launchd[1]: (org.isc.named) Throttling respawn: Will start in 10 seconds
    9/5/12 2:43:17.060 PM named[3171]: starting BIND 9.8.1-P1 -f
    9/5/12 2:43:17.060 PM named[3171]: built with '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-dependency-tracking' '--prefix=/usr' '--sysconfdir=/private/etc' '--localstatedir=/private/var' '--enable-atomic=no' '--with-openssl=yes' '--with-gssapi=yes' '--enable-symtable=none' 'CC=/Applications/Xcode.app/Contents/Developer/Toolchains/OSX10.8.xctoolchain/u sr/bin/cc' 'CFLAGS=-arch i386 -arch x86_64 -g -Os -pipe -gdwarf-2 ' 'LDFLAGS=-arch i386 -arch x86_64 -framework IOKit -framework CoreFoundation' 'CXX=/Applications/Xcode.app/Contents/Developer/Toolchains/OSX10.8.xctoolchain/ usr/bin/c++' 'CXXFLAGS=-arch i386 -arch x86_64 -g -Os -pipe '
    9/5/12 2:43:17.064 PM named[3171]: /private/etc/named.conf:4: open: /etc/rndc.key: file not found
    9/5/12 2:43:17.064 PM named[3171]: loading configuration: file not found
    9/5/12 2:43:17.064 PM named[3171]: exiting (due to fatal error)
    9/5/12 2:43:17.065 PM com.apple.launchd[1]: (org.isc.named[3171]) Exited with code: 1
    9/5/12 2:43:17.065 PM com.apple.launchd[1]: (org.isc.named) Throttling respawn: Will start in 10 seconds
    9/5/12 2:43:22.164 PM com.apple.launchd[1]: (org.freeradius.radiusd[3173]) Exited with code: 1
    9/5/12 2:43:22.164 PM com.apple.launchd[1]: (org.freeradius.radiusd) Throttling respawn: Will start in 10 seconds
    9/5/12 2:43:27.075 PM named[3174]: starting BIND 9.8.1-P1 -f
    Process:         SleepServicesD [48]
    Path:            /System/Library/CoreServices/SleepServicesD
    Identifier:      SleepServicesD
    Version:         1.43
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [1]
    User ID:         0
    Date/Time:       2012-09-05 07:47:33.363 -0400
    OS Version:      Mac OS X 10.8.1 (12B19)
    Report Version:  10
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_CRASH (SIGABRT)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Application Specific Information:
    Assertion failed: (ret == kIOReturnSuccess), function -[PowerStateTracker init], file /SourceCache/SleepServicesD_executables/SleepServicesD-1.43/SleepServicesD/Powe rStateTracker.m, line 148.
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   libsystem_kernel.dylib             0x00007fff8cbbe212 __pthread_kill + 10
    1   libsystem_c.dylib                  0x00007fff897deb34 pthread_kill + 90
    2   libsystem_c.dylib                  0x00007fff89822dfa abort + 143
    3   libsystem_c.dylib                  0x00007fff89823dd5 __assert_rtn + 146
    4   SleepServicesD                     0x000000010ce44e09 0x10ce43000 + 7689
    5   SleepServicesD                     0x000000010ce43e75 0x10ce43000 + 3701
    6   libdyld.dylib                      0x00007fff87b2b7e1 start + 1
    Thread 1:: Dispatch queue: com.apple.libdispatch-manager
    0   libsystem_kernel.dylib             0x00007fff8cbbed16 kevent + 10
    1   libdispatch.dylib                  0x00007fff8bba8e26 _dispatch_mgr_invoke + 883
    2   libdispatch.dylib                  0x00007fff8bba8a2a _dispatch_mgr_thread + 54
    Thread 0 crashed with X86 Thread State (64-bit):
      rax: 0x0000000000000000  rbx: 0x0000000000000006  rcx: 0x00007fff52dbcd28  rdx: 0x0000000000000000
      rdi: 0x0000000000000707  rsi: 0x0000000000000006  rbp: 0x00007fff52dbcd50  rsp: 0x00007fff52dbcd28
       r8: 0x00007fff77590278   r9: 0x0000000000000094  r10: 0x0000000020000000  r11: 0x0000000000000206
      r12: 0x000000010ce4e16e  r13: 0x000000010ce4e050  r14: 0x00007fff77591180  r15: 0x000000010ce4e06a
      rip: 0x00007fff8cbbe212  rfl: 0x0000000000000206  cr2: 0x00007fff77589fe8
    Logical CPU: 0
    Binary Images:
           0x10ce43000 -        0x10ce50fff  SleepServicesD (1.43) <0FDAEB5E-4E24-3836-AFBD-81E309DEB0DC> /System/Library/CoreServices/SleepServicesD
        0x7fff6ca43000 -     0x7fff6ca7793f  dyld (210.2.3) <A40597AA-5529-3337-8C09-D8A014EB1578> /usr/lib/dyld
        0x7fff87083000 -     0x7fff870d4fff  com.apple.SystemConfiguration (1.12 - 1.12) <7A8300B5-F5B3-39F0-A4B2-4C0C293FA29F> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
        0x7fff871b7000 -     0x7fff871dbff7  libc++abi.dylib (24.2) <340E7C7B-DC93-3AA2-B015-B1C9541EC255> /usr/lib/libc++abi.dylib
        0x7fff87314000 -     0x7fff87315ff7  libSystem.B.dylib (169.3) <365477AB-D641-389D-B8F4-A1FAE9657EEE> /usr/lib/libSystem.B.dylib
        0x7fff87382000 -     0x7fff873a3ff7  libCRFSuite.dylib (33) <736ABE58-8DED-3289-A042-C25AF7AE5B23> /usr/lib/libCRFSuite.dylib
        0x7fff8754e000 -     0x7fff875fffff  com.apple.LaunchServices (539 - 539) <04FA5C61-6349-3841-9609-B650B6222800> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
        0x7fff87772000 -     0x7fff877a8fff  libsystem_info.dylib (406.17) <4FFCA242-7F04-365F-87A6-D4EFB89503C1> /usr/lib/system/libsystem_info.dylib
        0x7fff877d8000 -     0x7fff87827ff7  libcorecrypto.dylib (106) <57BC99C6-3C3F-344C-BDD6-25E845D956F2> /usr/lib/system/libcorecrypto.dylib
        0x7fff87935000 -     0x7fff87936ff7  libdnsinfo.dylib (453.16) <38A3E0F4-E34C-3D45-A2C9-4CDE2DF007BD> /usr/lib/system/libdnsinfo.dylib
        0x7fff87aca000 -     0x7fff87b27ff7  com.apple.AE (645 - 645) <9C3E54BA-EE6B-3F02-8775-9C4AF40F40CD> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
        0x7fff87b29000 -     0x7fff87b2cff7  libdyld.dylib (210.2.3) <F59367C9-C110-382B-A695-9035A6DD387E> /usr/lib/system/libdyld.dylib
        0x7fff893df000 -     0x7fff8944cfff  com.apple.datadetectorscore (4.0 - 269.1) <C94C372B-3821-3A46-A8C2-091AB1CFF7F4> /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDe tectorsCore
        0x7fff897c9000 -     0x7fff89895fef  libsystem_c.dylib (825.24) <16B6B86C-53EE-36E8-AC2B-4AADC1008098> /usr/lib/system/libsystem_c.dylib
        0x7fff89e95000 -     0x7fff89e96fff  liblangid.dylib (116) <864C409D-D56B-383E-9B44-A435A47F2346> /usr/lib/liblangid.dylib
        0x7fff89ec4000 -     0x7fff89ec7fff  com.apple.TCC (1.0 - 1) <DE7ECAC3-BD08-323A-9C12-EE4A49B72871> /System/Library/PrivateFrameworks/TCC.framework/Versions/A/TCC
        0x7fff8a2ae000 -     0x7fff8a421ff7  com.apple.CFNetwork (596.1 - 596.1) <62830510-738D-3719-AD51-68E816B13BB7> /System/Library/Frameworks/CFNetwork.framework/Versions/A/CFNetwork
        0x7fff8a438000 -     0x7fff8a440ff7  libsystem_dnssd.dylib (379.27.1) <B9F7B01D-8FAF-3CA5-909E-4D52B8D2DD8A> /usr/lib/system/libsystem_dnssd.dylib
        0x7fff8a914000 -     0x7fff8a97dfff  libstdc++.6.dylib (56) <EAA2B53E-EADE-39CF-A0EF-FB9D4940672A> /usr/lib/libstdc++.6.dylib
        0x7fff8a989000 -     0x7fff8a989fff  com.apple.CoreServices (57 - 57) <9DD44CB0-C644-35C3-8F57-0B41B3EC147D> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
        0x7fff8a9a5000 -     0x7fff8a9a7fff  libquarantine.dylib (52) <4BE2E642-A14F-340A-B482-5BD2AEFD9C24> /usr/lib/system/libquarantine.dylib
        0x7fff8b648000 -     0x7fff8b656ff7  libsystem_network.dylib (77.10) <0D99F24E-56FE-380F-B81B-4A4C630EE587> /usr/lib/system/libsystem_network.dylib
        0x7fff8bab4000 -     0x7fff8bae5fff  com.apple.DictionaryServices (1.2 - 184) <B37F9A90-8954-3DEC-A216-8ABB15C615A1> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
        0x7fff8bba4000 -     0x7fff8bbb9ff7  libdispatch.dylib (228.18) <0B6B6E7F-4D8A-3F3B-A4BF-6CF34638DBBB> /usr/lib/system/libdispatch.dylib
        0x7fff8bbbc000 -     0x7fff8bbbcfff  libOpenScriptingUtil.dylib (148) <4DB14EC4-422C-3AE8-83BF-354FEC197FD3> /usr/lib/libOpenScriptingUtil.dylib
        0x7fff8bbbd000 -     0x7fff8bc3efff  com.apple.Metadata (10.7.0 - 707.1) <ED39A710-1D87-3207-BB7D-4465B2673C1D> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
        0x7fff8bd19000 -     0x7fff8bd26fff  libbz2.1.0.dylib (29) <CE9785E8-B535-3504-B392-82F0064D9AF2> /usr/lib/libbz2.1.0.dylib
        0x7fff8bd82000 -     0x7fff8bd8afff  liblaunch.dylib (442.21) <224CB010-6CF8-3FC2-885C-6F80330321EB> /usr/lib/system/liblaunch.dylib
        0x7fff8bd8b000 -     0x7fff8bd8cfff  libsystem_blocks.dylib (59) <D92DCBC3-541C-37BD-AADE-ACC75A0C59C8> /usr/lib/system/libsystem_blocks.dylib
        0x7fff8bdc2000 -     0x7fff8bdc7fff  libcompiler_rt.dylib (30) <08F8731D-5961-39F1-AD00-4590321D24A9> /usr/lib/system/libcompiler_rt.dylib
        0x7fff8c7ee000 -     0x7fff8cb05ff7  com.apple.CoreServices.CarbonCore (1037 - 1037) <5127E2AB-AE98-3393-AEF6-CA8C1090F921> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
        0x7fff8cbaa000 -     0x7fff8cbabff7  libremovefile.dylib (23.1) <DBBFAF35-AC78-3856-92F6-6E4FD9DF14A2> /usr/lib/system/libremovefile.dylib
        0x7fff8cbac000 -     0x7fff8cbc7ff7  libsystem_kernel.dylib (2050.9.2) <F646589B-13F8-3685-8C17-92C77993AE86> /usr/lib/system/libsystem_kernel.dylib
        0x7fff8d38e000 -     0x7fff8d3a5fff  com.apple.GenerationalStorage (1.1 - 132.1) <EAB41613-0145-3CE5-AA60-A8A791A3EE22> /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Gene rationalStorage
        0x7fff8d600000 -     0x7fff8d601fff  libDiagnosticMessagesClient.dylib (7) <56A70657-E8C2-3804-AB87-77DC100512A4> /usr/lib/libDiagnosticMessagesClient.dylib
        0x7fff8e379000 -     0x7fff8e3a4fff  libxslt.1.dylib (11.3) <441776B8-9130-3893-956F-39C85FFA644F> /usr/lib/libxslt.1.dylib
        0x7fff8e3a5000 -     0x7fff8e3aafff  libcache.dylib (57) <65187C6E-3FBF-3EB8-A1AA-389445E2984D> /usr/lib/system/libcache.dylib
        0x7fff8e580000 -     0x7fff8e58fff7  libxar.1.dylib (105) <370ED355-E516-311E-BAFD-D80633A84BE1> /usr/lib/libxar.1.dylib
        0x7fff8fb43000 -     0x7fff8fb49fff  libmacho.dylib (829) <BF332AD9-E89F-387E-92A4-6E1AB74BD4D9> /usr/lib/system/libmacho.dylib
        0x7fff8fb96000 -     0x7fff8fb9dfff  libcopyfile.dylib (89) <876573D0-E907-3566-A108-577EAD1B6182> /usr/lib/system/libcopyfile.dylib
        0x7fff8fb9e000 -     0x7fff8fefaff7  com.apple.Foundation (6.8 - 945) <0C972F73-0C07-3384-98F2-B176E0289494> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
        0x7fff8ffbd000 -     0x7fff8ffbfff7  libunc.dylib (25) <92805328-CD36-34FF-9436-571AB0485072> /usr/lib/system/libunc.dylib
        0x7fff900df000 -     0x7fff900edff7  libkxld.dylib (2050.9.2) <4BEE9BC3-3708-330E-89D6-03E715D712CC> /usr/lib/system/libkxld.dylib
        0x7fff90313000 -     0x7fff90410fff  libsqlite3.dylib (138) <8D6A6805-1494-30D1-9F2A-F58FA3C0D7EE> /usr/lib/libsqlite3.dylib
        0x7fff9044b000 -     0x7fff904d8ff7  com.apple.SearchKit (1.4.0 - 1.4.0) <C7F43889-F8BF-3CB9-AD66-11AEFCBCEDE7> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
        0x7fff905f7000 -     0x7fff9070fa27  libobjc.A.dylib (532) <9FA80CDA-97F4-3801-8879-0C1B976BC5CA> /usr/lib/libobjc.A.dylib
        0x7fff90767000 -     0x7fff90772fff  libsystem_notify.dylib (98.5) <C49275CC-835A-3207-AFBA-8C01374927B6> /usr/lib/system/libsystem_notify.dylib
        0x7fff9084e000 -     0x7fff90855fff  com.apple.NetFS (5.0 - 4.0) <82E24B9A-7742-3DA3-9E99-ED267D98C05E> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
        0x7fff90856000 -     0x7fff90868ff7  libz.1.dylib (43) <2A1551E8-A272-3DE5-B692-955974FE1416> /usr/lib/libz.1.dylib
        0x7fff90904000 -     0x7fff90904fff  libkeymgr.dylib (25) <CC9E3394-BE16-397F-926B-E579B60EE429> /usr/lib/system/libkeymgr.dylib
        0x7fff90988000 -     0x7fff9099ffff  com.apple.CFOpenDirectory (10.8 - 151.10) <FFBBA538-00B5-334E-BA5B-C8AD6CDCDA14> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpen Directory.framework/Versions/A/CFOpenDirectory
        0x7fff91197000 -     0x7fff9119dfff  com.apple.DiskArbitration (2.5 - 2.5) <348AC0CC-6BCE-3416-9141-A5C1164EDDFF> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
        0x7fff912a3000 -     0x7fff9148cfff  com.apple.CoreFoundation (6.8 - 744) <47AEA7C7-EF9B-3FC6-AEBF-CE02FC650301> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
        0x7fff9194b000 -     0x7fff91959fff  libcommonCrypto.dylib (60026) <2D6537F5-1B5E-305C-A1CF-D1FA80CA3939> /usr/lib/system/libcommonCrypto.dylib
        0x7fff91cb1000 -     0x7fff91cbeff7  com.apple.NetAuth (4.0 - 4.0) <F5BC7D7D-AF28-3C83-A674-DADA48FF7810> /System/Library/PrivateFrameworks/NetAuth.framework/Versions/A/NetAuth
        0x7fff91cbf000 -     0x7fff91cc5ff7  libunwind.dylib (35.1) <21703D36-2DAB-3D8B-8442-EAAB23C060D3> /usr/lib/system/libunwind.dylib
        0x7fff91cc6000 -     0x7fff91d33ff7  com.apple.framework.IOKit (2.0 - 755.9.7) <9B7C5E7A-3F7A-3E70-8179-4384992B84E0> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
        0x7fff91f9d000 -     0x7fff9226aff7  com.apple.security (7.0 - 55178.0.1) <8102877E-C866-33D4-A947-02FC7F4BAA95> /System/Library/Frameworks/Security.framework/Versions/A/Security
        0x7fff924c7000 -     0x7fff9256dfff  com.apple.CoreServices.OSServices (557 - 557) <F5955FD8-E6E1-359F-9D9D-381E55E3EF37> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
        0x7fff925a2000 -     0x7fff9260aff7  libc++.1.dylib (65.1) <20E31B90-19B9-3C2A-A9EB-474E08F9FE05> /usr/lib/libc++.1.dylib
        0x7fff92615000 -     0x7fff92643ff7  libsystem_m.dylib (3022.6) <B434BE5C-25AB-3EBD-BAA7-5304B34E3441> /usr/lib/system/libsystem_m.dylib
        0x7fff928ad000 -     0x7fff928aeff7  libsystem_sandbox.dylib (220) <3C3B03CF-C525-3CB3-8557-62E91B93AC95> /usr/lib/system/libsystem_sandbox.dylib
        0x7fff934b2000 -     0x7fff934c5ff7  libbsm.0.dylib (32) <F497D3CE-40D9-3551-84B4-3D5E39600737> /usr/lib/libbsm.0.dylib
        0x7fff934c6000 -     0x7fff934cafff  libpam.2.dylib (20) <C8F45864-5B58-3237-87E1-2C258A1D73B8> /usr/lib/libpam.2.dylib
        0x7fff934d7000 -     0x7fff93523ff7  libauto.dylib (185.1) <73CDC482-16E3-3FC7-9BB4-FBA2DA44DBC2> /usr/lib/libauto.dylib
        0x7fff93524000 -     0x7fff93546ff7  libxpc.dylib (140.37) <C552985C-2171-3136-A1B9-3AB21CBF7C4A> /usr/lib/system/libxpc.dylib
        0x7fff93547000 -     0x7fff93644ff7  libxml2.2.dylib (22.3) <47B09CB2-C636-3024-8B55-6040F7829B4C> /usr/lib/libxml2.2.dylib
        0x7fff9380f000 -     0x7fff93a0ffff  libicucore.A.dylib (491.11.1) <17E8B610-6B16-3F91-B49C-7CAE0D08E9CF> /usr/lib/libicucore.A.dylib
    External Modification Summary:
      Calls made by other processes targeting this process:
        task_for_pid: 0
        thread_create: 0
        thread_set_state: 0
      Calls made by this process:
        task_for_pid: 0
        thread_create: 0
        thread_set_state: 0
      Calls made by all processes on this machine:
        task_for_pid: 21
        thread_create: 0
        thread_set_state: 0
    VM Region Summary:
    ReadOnly portion of Libraries: Total=79.5M resident=36.3M(46%) swapped_out_or_unallocated=43.2M(54%)
    Writable regions: Total=40.1M written=332K(1%) resident=408K(1%) swapped_out=0K(0%) unallocated=39.7M(99%)
    REGION TYPE                      VIRTUAL
    ===========                      =======
    MALLOC                             31.3M
    MALLOC guard page                    32K
    STACK GUARD                        56.0M
    Stack                              8712K
    VM_ALLOCATE                           8K
    __DATA                             3240K
    __LINKEDIT                         52.8M
    __TEXT                             26.7M
    __UNICODE                           544K
    shared memory                        12K
    ===========                      =======
    TOTAL                             179.1M

    1. Mae sure that the ports you have specified in the Communiation tab are not specified anywhere else, either in PCo or in another application on the PCo worstation. For testing, set either MII or Legacy and use the same port number for each, just don't chec both boxes at the same time.
    The Legacy and MII port settings must be different, or you should receive an error in PCo.  As Steve mentioned, a port address can only be used once by any application on a given server.  Multiple PCo agents using the same port will cause a conflict as will trying to use the same port for both Legacy and MII connector for a single agent.  MII 11.5 only supports the Legacy (UDC) Connector, so I suggest that you do not select the MII connector check box and leave the port setting blank.  Select Legacy connector and set a port address for that connector.
    To determine if a port is available to use, you can open a command prompt and use the command netstat -a -o to list all the ports which are in use.  Please note, this is only active ports.
    2. I think you will need to get the compatibility issue between xMII 11.5 and PCo 2.1 answered by the PCo team; I have no way of testing this.
    MII 11.5 should work with PCo 2.1.  Configure the PCo agent to use the Legacy connector.  Create a UDC data server in MII and Pco should work like the UDS.
    Regards
    Chris Carney

  • Howto start a bpel process by using a http-get browser request

    Hi,
    i need some help with the start of a bpel-process.
    My process will be started by a receive-activity which comes from a http-get browser request. Then the process will redirect the request-string to a synchronous service to get back its response to process it (this service has of course a wsdl).
    The initial receive-activity needs a port Type and an operation to be declared. These concrete binding declarations must be defined in a wsdl-document i think. But the browser-client has no wsdl (and doesn’t need it since it is no webservice, i think). Where do i declare the operation, port Type, etc.? Is it possible that it will be declared in an extra WSDL which represents the bpel-process?
    Any help would be appreciated.
    Albrecht

    check out 102.invokingProcesses tutorial/jsp and the html page .. that uses http invocation ..
    hth clemens

  • How to stop and start only the process of Oracle Application Express?

    I'd like to know how to stop the process of Oracle Application Express on my server installed oracle express package.
    After installed Oracle Express edition, not only oracle database server processes but also Oracle Application Express, such as http server, is started automatically...
    I hope to stop and start Application Express on demand but is this feature enabled?

    Oracle Apex is an API, if that helps you understand / visualize. You do not start Apex process nor stop it.
    When an Apex session starts it starts calling the API.
    You can however start / stop the listener. It may be OHS, ApexListener and the J2EE container running it, OC4J or any other "server" that you are using.
    The built-in EPG is something like an API again, you cannot start / stop it but you can disable/enable it with DBMS_XDB.SETHTTPPORT API.
    Regards,

  • How we can control auto start/stop of db/listener on Unix/linux?

    How we can control auto start/stop of db/listener on Unix/linux?

    http://download-uk.oracle.com/docs/html/B10812_01/chapter2.htm#BABGDGHF

  • Http server start/stop process

    Hi
    I always see below start/stop messages in the D:\app\Oracle\opmn\logs\HTTP_Server~1
    We are not stopping/starting anything. Does it mean that the http server stop/start itself ? Will this affect users ?
    12/06/07 23:18:12 Start process
    12/06/26 10:03:03 Stop process
    12/06/26 10:04:05 Start process
    [Tue Jun 26 10:04:05 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
    12/06/29 11:52:06 Stop process
    12/06/29 11:53:08 Start process
    [Fri Jun 29 11:53:09 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
    12/07/03 08:54:18 Stop process
    12/07/03 08:55:20 Start process
    [Tue Jul 03 08:55:21 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
    Oracle-Application-Server-10g/9.0.4.0.0 Oracle-HTTP-Server running...
    12/07/11 23:25:45 Start process
    12/07/14 12:38:15 Stop process
    12/07/14 12:39:17 Start process
    [Sat Jul 14 12:39:17 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
    12/07/18 18:06:11 Stop process
    12/07/18 18:07:13 Start process
    [Wed Jul 18 18:07:13 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
    12/07/25 10:58:29 Stop process
    12/07/25 10:59:31 Start process
    [Wed Jul 25 10:59:32 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
    12/07/25 11:03:02 Stop process
    12/07/25 11:04:04 Start process
    [Wed Jul 25 11:04:05 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
    12/07/25 11:06:55 Stop process
    12/07/25 11:07:57 Start process
    [Wed Jul 25 11:07:57 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
    Similar stop/start messages in D:\app\Oracle\opmn\logs\ipm.log
    12/07/25 10:58:27 [4] [libopmnohs] Process Unreachable: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:9136)
    12/07/25 10:58:29 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:9136)
    12/07/25 10:59:29 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:9136)
    12/07/25 10:59:29 [4] [libopmnohs] Forcefully Terminating Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:9136)
    12/07/25 10:59:31 [4] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:0)
    12/07/25 10:59:32 [4] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672)
    12/07/25 11:01:21 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672) [The connection SSL receive timed out]
    12/07/25 11:02:11 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672) [The connection SSL receive timed out]
    12/07/25 11:03:01 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672) [The connection SSL receive timed out]
    12/07/25 11:03:01 [4] [libopmnohs] Process Unreachable: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672)
    12/07/25 11:03:02 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672)
    12/07/25 11:04:02 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672)
    12/07/25 11:04:02 [4] [libopmnohs] Forcefully Terminating Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672)
    12/07/25 11:04:04 [4] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:0)
    12/07/25 11:04:04 [4] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956)
    12/07/25 11:05:14 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956) [The connection SSL receive timed out]
    12/07/25 11:06:04 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956) [The connection SSL receive timed out]
    12/07/25 11:06:54 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956) [The connection SSL receive timed out]
    12/07/25 11:06:54 [4] [libopmnohs] Process Unreachable: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956)
    12/07/25 11:06:54 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956)
    12/07/25 11:07:54 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956)
    12/07/25 11:07:54 [4] [libopmnohs] Forcefully Terminating Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956)
    12/07/25 11:07:56 [4] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:0)
    12/07/25 11:07:57 [4] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:4644)

    Hi ,
    It seems there is a clash of resources.There are rogue httpd processes left whenever OHS starts/restarts.File httpd.pid contains root httpd process and with the help of scoreboard file its communicated to child httpd processes.
    1.check OPMN LOGS.
    2.shutdown all process (OPMN infact)
    3.pkill or kill -9 httpd
    4.go to $ORACLE_HOME/opmn/logs/states and delete all files.
    5.check no other HTTP server ports are being used by other processes.(restarting the server is better idea !).
    6.CHECK ons.conf IF ANY ENTRIES ARE MISSING / MODIFIED - V IMP
    6.Start OPMN and HTTP Server.
    Edited by: anandk on Jul 25, 2012 10:17 AM
    Edited by: anandk on Jul 25, 2012 10:19 AM
    Edited by: anandk on Jul 25, 2012 10:20 AM

  • When starting to install they stop the process and say encountered many problems try re installing

    When starting to install they stop the process and say "encountered many problems try re installing" and system not modified

    Try this:
    1. Boot from your Panther Installer Disk. After the installer loads select Disk Utility from the Installer menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    7. Once the formatting has completed quit DU to return to the installer. Proceed with the installation of Panther.

  • Batch / script file to start /stop sap server

    Hi,
       I would like to start/stop SAP server using batch file (in windows). I need this, whenever we have to shutdown the server and restart of the server, so that SAP will automatically shutdown and restart using batch files while server restart cases? If anyone knows, please let me know. Thanks,
    Regards,
    Sundar.

    target of the 700 sapstartsrv improvement was to deliver identical functionality on all SAP platforms. As the DCOM programing model is only available on Windows platforms sapstartsrv.exe was enhanced by the WEB-Service interface and is available now on Unix too.
    The DCOM SAPControl interface of sapstartsrv.exe is still existing, but only on Windows. Here you can use VB Script or any other programming language able to handle DCOM objects to write your own programs / scripts to interact with the SAPControl.
    sapcontrol.exe is a command line program available since 700 which enables you control over nearly all functions of the sapstart service.
    Even it has the same name as the DCOM interface it' something completly different.
    regards
      Peter
    PS: sapcontrol syntax
    usage: sapcontrol [
                       -prot GSOAP_HTTP| http using gsoap build in sockets (default)
                             NI_HTTP|    http using SAP NI sockets (prefer Unix domain sockets)
                             NI_HTTPS|   https using SAP NI sockets (prefer Unix domain sockets)
                             WINHTTP|    http using Windows winhttp
                             WINHTTPS|   https using Windows winhttp
                             PIPE        Windows named pipes
                       [-user <user> <password>] OS user and password for Webservice authentication
                       [-repeat <N> <D>]         Repeat Webmethod call <N> times (-1=forever) with <D> sec delay
                        -format list|            List output format (default)
                                script           Script output format
                       [-host <hostname>]        Host to connect to (default: localhost)
                       -nr <instance nr.>        SAP Instance number to connect to
                       -function <Webmethod> [parameter list]
    Webmethods: Start
                Stop [softtimeout sec]
                Shutdown
                RestartInstance [softtimeout sec]
                StopService
                StartService <SID>
                RestartService
                ParameterValue [<parameter>]
                GetStartProfile
                GetTraceFile
                GetAlertTree
                GetAlerts
                GetEnvironment
                GetVersionInfo
                GetQueueStatistic
                GetProcessList
                GetInstanceProperties
                ListDeveloperTraces
                ReadDeveloperTrace <filename> <filesize>
                ListLogFiles
                ReadLogFile <filename> [<filter> [<language> [<maxentries> [<cookie>]]]]
                AnalyseLogFiles [<severity 0-2>] [<maxentries>] [<starttime YYYY MM DD HH:MM:SS> <endtime YYYY MM DD HH:MM:S
    S>]
                OSExecute <command> <async> <timeout> <protocolfile>
                SendSignal <pid> <signal>
                GetSystemInstanceList
                StartSystem [ALL|SCS|DIALOG|ABAP|J2EE|LEVEL <level> [<waittimeout sec>]]
                StopSystem [ALL|SCS|DIALOG|ABAP|J2EE|LEVEL <level> [[<waittimeout sec>] [softtimeout sec]]]
                RestartSystem [ALL|SCS|DIALOG|ABAP|J2EE|LEVEL <level> [[<waittimeout sec>] [softtimeout sec]]]
                AccessCheck <function>
                ABAPReadSyslog
                ABAPReadRawSyslog
                ABAPGetWPTable
                J2EEControlProcess <processname> <function>
                J2EEGetProcessList
                J2EEGetThreadList
                J2EEGetSessionList
                J2EEGetCacheStatistic
                J2EEGetApplicationAliasList
                J2EEGetVMGCHistory
                J2EEGetVMHeapInfo
                StartWait <timeout sec> <delay sec>
                StopWait <timeout sec> <delay sec>
                WaitforStarted <timeout sec> <delay sec>
                WaitforStopped <timeout sec> <delay sec>
    Exitcode: 0: Last Webmethod call successfull
              1: Last Webmethod call failed, invalid parameter
              2: StartWait, StopWait, WaitforStarted, WaitforStopped timed out
              3: GetProcessList succeeded, all processes running correctly
              4: GetProcessList succeeded, all processes stopped
    Security: Trusted connects without user and password check are possible through
              Unix domain socket or Windows named pipes. Protected webmethods like
              Start or Stop require a trusted connection or OS user and password
              authentication.

  • Start/Stop Weblogic Admin Server

    Hello,
    I have installed Forms 11g in my home Pc, so is it possible to Start/Stop Weblogic Admin Server and the Dos window that appears, not to ask me about username and password?
    I mean like a bat file (script), to enter the username and password in a text file
    if yes, also the same in WLS_FORMS?
    Thank you.

    Starting an Administration Server with a Startup Script
    An Administration Server is a WebLogic Server instance that maintains configuration data for a domain. In a development environment, it is usually sufficient to start an Administration Server and deploy your applications directly onto the Administration Server. In a production environment, you create Managed Servers to run applications. For more information about Administration Servers and Managed Servers, see "Understanding WebLogic Server Domains" in Understanding Domain Configuration for Oracle WebLogic Server.
    You can start an Administration Server with a default startup script or create your own. To start an Administration Server with the WebLogic Server-included startup script:
    If you have not already done so, use the Configuration Wizard or WebLogic Scripting Tool (WLST) to create a domain.
    See Creating Domains Using the Configuration Wizard or "Creating Domains Using WLST Offline" in Oracle WebLogic Scripting Tool.
    Open a shell (command prompt) on the computer on which you created the domain.
    Change to the directory in which you located the domain.
    By default, this directory is MW_HOME\user_projects\domains\DOMAIN_NAME, where DOMAIN_NAME is the root directory of the domain. (The name of this directory is the name of the domain.)
    Run one of the following scripts:
    bin/startWebLogic.cmd (Windows)
    bin\startWebLogic.sh (UNIX and Windows. On Windows, this script supports the MKS and Cygnus BASH UNIX shell emulators.)
    Note:
    If you use a Configuration Wizard template that is provided by WebLogic Server, your domain directory includes a start script named startWebLogic. If you use a domain template from another source, the wizard might not create a start script, or it might create a script with a different name. The template designer determines whether the wizard creates a start script and the name of the script.
    The startWebLogic script does the following:
    Sets environment variables by invoking DOMAIN_NAME\bin\setDomainEnv.cmd (setDomainEnv.sh on UNIX), where DOMAIN_NAME is the directory in which you located the domain; for example, WL_HOME\user_projects\domains\DOMAIN_NAME, and where WL_HOME is the location in which you installed WebLogic Server.
    Invokes the java weblogic.Server command, which starts a JVM that is configured to run a WebLogic Server instance.
    When the server successfully completes its startup process, it writes the following message to standard out (which, by default, is the command window):
    <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    Starting an Administration Server from the Windows Start Menu
    When you create an Administration Server on a Windows computer, the Configuration Wizard creates a shortcut on the Start Menu for starting the server (User Projects > DOMAIN_NAME > Start Admin Server for WebLogic Server Domain).
    The command that the Configuration Wizard adds to the Start menu opens a command window and calls the startup script that is described in Starting an Administration Server with a Startup Script. When the server has successfully completed its startup process, it writes the following message to standard out (which, by default, is the command window):
    <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    Mark this helpful/correct to help others too

  • Starting/stopping mobile server

    Hi
    This is a two part question dealing with the starting and stopping of mobile server...
    To start the mobile server via win cmd line, I use java -jar oc4j.jar. How should I stop the server in this scenario? I have been using cntr-C in the dos window, I'm hoping there's a better way, but I haven't found any mention of it in the docs.
    Secondly, when I install the windows service to start/stop mobile server, I am not able to login to the mobile server's administrative console - does anyone know the reason for this?
    Thanks,
    Tim

    In recent windows xp systems there is a command line tool named "kill" or something like that, to kill the process like unix systems (kill pid).
    Also, killing the java process with ctrl/alt/suppr or using tools like process explorer (sysinternals) can achieve this.
    For the second problem, also check if you have installed the repository in a back-end database (SYSTEM's password needed while installing mobile server). If you did not install the repository in back-end database this could also be the problem, I think.

  • Error in starting WebLogic Server Process

    Hi,
    I'm suffering a serious sproblem that results in failure in starting WebLogic
    Server Processes. What i'm trying is to use "PostBindUID" nad "PostBindGID" services
    that changes the processes owner from "root" to "somebody". However, once i set
    it in Console (Configure a new Unix Machine), the server cannot start afterwards
    with the following errors in the screen (when i execute startWebLogic.sh) ...
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : 11 occurred at PC=0x917116B8
    Function=Java_weblogic_platform_Unix_getEGroup0+0x28
    Library=/opt/weblogic/bea/weblogic81/server/lib/solaris/libweblogicunix1.so
    Current Java thread:
    at weblogic.platform.Unix.getEGroup0(Native Method)
    at weblogic.platform.Unix.getEffectiveGroup(Unix.java:95)
    at weblogic.t3.srvr.T3Srvr.switchEffectiveGroup(T3Srvr.java:2080)
    at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:1001)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:359)
    at weblogic.Server.main(Server.java:32)
    Dynamic libraries:
    0x10000 /opt/weblogic/bea/jdk141_05/bin/java
    0xff360000 /usr/lib/libthread.so.1
    0xff3a0000 /usr/lib/libdl.so.1
    0xff280000 /usr/lib/libc.so.1
    0xff350000 /usr/platform/FJSV,GPUZC-M/lib/libc_psr.so.1
    0xfe000000 /opt/weblogic/bea/jdk141_05/jre/lib/sparc/server/libjvm.so
    0xff210000 /usr/lib/libCrun.so.1
    0xff1f0000 /usr/lib/libsocket.so.1
    0xff100000 /usr/lib/libnsl.so.1
    0xff0b0000 /usr/lib/libm.so.1
    0xff240000 /usr/lib/libw.so.1
    0xff090000 /usr/lib/libmp.so.2
    0xff060000 /opt/weblogic/bea/jdk141_05/jre/lib/sparc/native_threads/libhpi.so
    0xff030000 /opt/weblogic/bea/jdk141_05/jre/lib/sparc/libverify.so
    0xfe7c0000 /opt/weblogic/bea/jdk141_05/jre/lib/sparc/libjava.so
    0xfe7a0000 /opt/weblogic/bea/jdk141_05/jre/lib/sparc/libzip.so
    0xfe670000 /usr/lib/nss_files.so.1
    0x91850000 /opt/weblogic/bea/jdk141_05/jre/lib/sparc/libnet.so
    0x91710000 /opt/weblogic/bea/weblogic81/server/lib/solaris/libweblogicunix1.so
    0x914d0000 /opt/weblogic/bea/jdk141_05/jre/lib/sparc/libnio.so
    0x914b0000 /usr/lib/librt.so.1
    0x91260000 /usr/lib/libaio.so.1
    0x91240000 /opt/weblogic/bea/jdk141_05/jre/lib/sparc/libioser12.so
    0x90d60000 /usr/lib/nss_dns.so.1
    0x90b30000 /usr/lib/libresolv.so.2
    Local Time = Mon Jun 14 18:16:04 2004
    Elapsed Time = 143
    # The exception above was detected in native code outside the VM
    # Java VM: Java HotSpot(TM) Server VM (1.4.1_05-b01 mixed mode)
    Abort
    If anyone have any thoughts, please kindly let me know.
    Many thanks,
    Ralph

    Hi,
    Few comments here...
    1) Seems your environment is not setup correctly but that is not the big cause here.....
    2) This one is important, it seems that you installed weblogic using a different account and are trying to run it from a different account.
    So the account with which you are trying to run weblogic does not have proper permission on
    MW_HOME\user_projects\domains\bifoundation_domain\config\fmwconfig\bootstrap\cwallet.sso
    Right click on the file and go in properties ..
    Enable full control,modify,Read and execute,read and write permissions for the user you are trying to start weblogic and apply it.
    if this simple steps doesnt work, please enable more logging by adding "-Djava.security.debug=jpspolicy" to startup option and grab more details.
    Good Luck let me know if this works.

  • Failed to start ns-slapd process on Windows

    I install Sun Directory Server 6.0 on Windows:
    1. Installation
    dsee_deploy install -c DS -i D:\DirectoryServer
    2. Create Instance
    D:\DirectoryServer\ds6\bin\dsadm create D:\DirectoryServer\ds
    3. Start instance
    D:\DirectoryServer\ds6\bin\dsadm start D:\DirectoryServer\ds
    And get folloving error:
    Server not running ! Failed to start ns-slapd process
    Server's log is empty.
    What I can do to solve this problem ?
    I see topic with this problem on UNiX platform, and
    how about Windows 2003? I make installation as Administrator.
    Michael Vasilyev

    Thank you, Ludovic !
    I have new error when create Instance with command (changes default port number):
    dsadm create -p 1525 D:\DirectoryServer\ds
    Then I start DirectoryServer:
    dsadm start D:\DirectoryServer\ds
    And get in command line:
    Waiting for server to start...
    Waiting for server to start...
    Waiting for server to start...
    Waiting for server to start...
    Waiting for server to start...
    Waiting for server to start...
    Waiting for server to start...
    Waiting for server to start...
    Waiting for server to start...
    Waiting for server to start...
    Waiting for server to start...
    Server not running!! Failed to start ns-slapd process
    In Dialog Window appear message:
    Directory Server ds is terminating. Failed to set the EventLog source.
    ---------------------------------------------------------------------------------------------

  • How to start a particular database in unix/linux

    Hi,
    Could any one tell me how to start a particular database in Unix/Linux assuming that my server consists of 10 databases.
    Can we use LSNRCTL tool for this??
    Regards,
    Nagarjun.

    > Could any one tell me how to start a particular database in Unix/Linux
    assuming that my server consists of 10 databases.
    There is something very wrong in basic understanding of Oracle RDBMS architecture, when running 10 Oracle instances on a single server.
    10x temp space. 10x redo space. 10x SGA. 10x system processes footprint. This is NOT how one scales Oracle and NOT how one uses Oracle optimally.

  • Creating a Business Service for Start/Stop Application Service in CCB 2.3.1

    Hi,
    I'm in the process of creating a BPA script that invokes a Business Service to perform a Start/Stop for a given Account ID/Premise ID combination. The Business Service is using the base Application Service: Start Stop (CILCSSEP). I am moving the Account ID and Premise ID, along with the start date and requested by fields to the data area of the Business Service, prior to invoking it. When I invoke the Business Service via the BPA script, it throws the below error message... I'm at a loss because the BILL_ADDR_SRCE_FLG is being set to a default of "PREM" on the Business Service Schema:
    A Bill Address Source is required on the address override record. Please enter a valid value.
    One of these two is true:
    1) The Bill Route Type on this record has a Bill Routing Method of 'Postall', or
    2) The main customer on the Account has a Quote Route Type with a Quote Routing Method of 'Postal'.
    In either case, the Bill Address Source must be populated with a valid value.
    If you need support please supply the following info to system support:
    Message number: 3, 59204
    Business Service: CMSTARTSERVICE
    Application Service: CILCSSEP
    Schema:
    <schema pageAction="fastChange">
    <accountId mapField="ACCT_ID"/>
    <df mapField="DEFAULT_FOR_FLG"/>
    <startDate mapField="STRT_START_DT"/>
    <startOption mapField="STRT_TYPE_FLG"/>
    <premiseId mapField="STRT_PREM_ID"/>
    <premAddress mapField="ADDRESS1"/>
    <premCity mapField="CITY"/>
    <startCisDiv mapField="STRT_CIS_DIVISION"/>
    <startReqBy mapField="STRT_STRT_REQ_BY"/>
    <bldStrtSaSw mapField="BUILD_START_SA_SW" default="true"/>
    <accountIdtwo mapField="ACCT_ID2"/>
    <mainCustPerId mapField="MAIN_CUST_PER_ID"/>
    <billFrmtFlg mapField="BILL_RTE_TYPE_CD" default="POSTAL" private="true"/>
    <billAddrSrcFlg mapField="BILL_ADDR_SRCE_FLG" default="PREM"/>
    <billAddrSrcFlg2 mapField="BILL_ADDR_SRCE_FLG2" default="PREM"/>
    <startStopTelephoneOverride type="list" mapList="OVRD_PHONE">
    <accountId mapField="ACCT_ID"/>
    <sequence mapField="SEQ_NUM"/>
    <phoneType mapField="PHONE_TYPE_CD"/>
    <internationalPrefix mapField="COUNTRY_CODE"/>
    <phone mapField="PHONE"/>
    <extension mapField="EXTENSION"/>
    <version mapField="VERSION"/>
    </startStopTelephoneOverride>
    <startBtn mapField="ACTION_START_SW" default="true" private="true"/>
    </schema>
    I'm running CC&B 2.3.1 - Any help in pointing me in the right direction to get this working would be greatly appreciated, Thanks!
    Regards,
    Jack

    Hi,
    Can you try and do this transaction online and see if the error occurs as well? If so run it with traces on and check for the details just before the error is thrown. ( you can also switch on debug via the service call, but it may be easier to debug when doing this online. ) I am predicting this error will occur also when you do it online.
    When you are using an Account with its main Person set up with BILL_ADDR_SRC_FLG as PREM you will need a valide PREM_ID on the CI_ACCT record for MAILING_PREM_ID and the premise needs to have a switch set to YES indicating it is a Mailing Address type Premise.
    Good luck
    Arjen

  • HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?

    HI ALL,
    CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
    cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
    THANKS
    HARITHA

    Hi,
    First and foremost let me advice you to be very careful while doing this.
    For Rescheduling
    RSPC> chain > Goto > Planning view and
    click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
    For terminating active chain
    You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
    The next step will be to go to targets that you were loading and remove the red requests from those targets.
    Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
    But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
    Re: Kill a Job
    Re: Killing a process chain.
    Regards,
    JituK

Maybe you are looking for