HP 4500 G510-n printer all in one

The print no copy, no scan, but print through the computer.

Hi ramosant,
Welcome to the HP Forums.
I see that you are having an issue with printing and scanning.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

Recommendations for printer/all in one for use with 10.9+? Help!

Does anyone have recommendations for a printer/all-in-one that will work with Mavericks? Monochrome (b&w) laser printer/all-in-one preferred. This is for a small office (5-8 people). Frequent pdf printing and 30+ page documents.
Right now I'm looking at Brother MFC-7860DW (might need something with a larger capacity), Brother MFC-8710DW, Epson WorkForce WF-M1030 (again, may need something w/ larger capacity), and Canon Laser imageCLASS MF4770n or Canon Laser imageCLASS MF4890dw. Also have looked at Canon imageCLASS MF6160dw but reviews are iffy. Any suggestions would be greatly appreciated!!

Thanks for your help and input, diggernyc. If I was going to say that my question had been answered I certainly would have chosen your response and not my own. It seems silly that you can't undo marking a post as "solved".
If anyone has suggestions, they are still appreciated. Thanks!

C1400 printer - all-in-one trouble shooting

Hello, I've recently purchased the C1400 printer - all-in-one, and it started having problems.
For some reason whenever I try to print something (for instance, a simple 1 page document), the printer activates, then prints a single page with some weird code on the top, then starts printing endless amounts of blank pages until I hit the cancel button. (?)
I'm running mac 10.5
I open to any advise - thanks.

zaq12 wrote:
printer all in one 4360 e can i kleave it on all day
Hi,
Yes, you can leave it on for whole day, it will go to sleep mode when it has nothig to do. If you wish to save a bit of electricity cost, you can turn it off when not in use.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can i change the region for the printer all in one

Hp Deskjet 3050 series J610.
Error: Non Compatible Cartridges
i bought a printer all in one in mexico border, this had a 122 cartridges, but now i bought a new cartridges 61 in texas.
i install it but when i send to print appear a error that show "Non compatible cartridges", so i check them in HP site, the numbers are different like mexico and US, but the HP part number are the same for both, so i try to fix the problem i found a solution tha say that required change the region for the printer.
How can i do this?
Thanks.

Welcome to the HP Forum!
mrmartin wrote:
Hp Deskjet 3050 series J610.
Error: Non Compatible Cartridges
i bought a printer all in one in mexico border, this had a 122 cartridges, but now i bought a new cartridges 61 in texas.
i install it but when i send to print appear a error that show "Non compatible cartridges", so i check them in HP site, the numbers are different like mexico and US, but the HP part number are the same for both, so i try to fix the problem i found a solution tha say that required change the region for the printer.
How can i do this?
Thanks.
You will have to contact HP to have the region for yourr printer changed. A representative will explain how to do it.
Kind regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I'm using windows 7 with a hp deskjet 3059A e Printer All-in-One J611n not scanning pc not found

My Deskjet 3059A e printer all-in-one J611n was working fine til my pc crashed. Now I can't get it to scan. Says computer not found & it is switched on to my pc via usb cable.... Help

Hello @terezaferreira , Welcome to the forums
I read your post about the scanning problems and I am here to help you out.
I would first suggest you restart the computer completely, and power reset the printer:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Now with both the printer and PC powered on, run the Print and Scan Doctor from your computer and send me a screen shot of the results or write me back with the detailed results.
Try scanning from the HP Software on your computer, and also scan from the printer to your PC. Tell me if either ways worked and what happened!
Have a great Tuesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printer all in one 4360 e can i kleave it on all day

printer all in one 4360 e can i kleave it on all day

zaq12 wrote:
printer all in one 4360 e can i kleave it on all day
Hi,
Yes, you can leave it on for whole day, it will go to sleep mode when it has nothig to do. If you wish to save a bit of electricity cost, you can turn it off when not in use.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP1512 USB Printer All in One

My Current printer an HP 1512 works OK as a single USB printer.I would like to add this printer to my Home Network using A Print Server,the only problem I have is finding a Print Server which will work with this Printer.I am told by TP-Link that their Print Server TL-PS310U hasnt been tested with My HP 1512 all in one printer,so cannot gime me a definite answer.Has any member had any experience of TP-Link Print Servers,or could suggest any other make that would definitely work?Any help appreciated Michael

zaq12 wrote:
printer all in one 4360 e can i kleave it on all day
Hi,
Yes, you can leave it on for whole day, it will go to sleep mode when it has nothig to do. If you wish to save a bit of electricity cost, you can turn it off when not in use.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

New printer all in one

Hi everyone,
i need to buy a new printer all in one (fax and scanner) with WiFi.
I want that it's compatible with AirPrint (i have a iMac with 10.8.3). Price up to €100.
Any advice?
Thank you.

There is a great list of compatible printers at > AirPrint basics
Everyone has there favorites brand(s), mine are Epson and Canon in that order.

Photosmart printer -all-in-one 5520 and windows 8.1 - INSTALLATION ERROR

I have a photosmart printer - model: all-in-one 5520; code number HPC57CC4 and my operating system is windows 8.1.
I had problems with the scan function and so I decided to disinstal the printer (from the Control Panel) and I even cancelled the HP folders.
Then I tried to reinstal the printer with the original CD but I got the message: INSTALLATION ERROR - DRIVER PACKAGE INSTALL GIVES THE ERROR -536870329 FOR THE PACKAGE C:\Program Files\HP\HP Photosmart 5520 series\DriverStore\Pipeline\hpvpl09.inf (that's the translation from Italian)
I have tried endless times to install with the online software from the HP assistance (hppsdr.exe, hppiw.exe, ps5520_1315-1.exe, hpscan and doctor) but I always get the above error message, the system recognizes my printer, but gives the error message few seconds after starting installing it.
If i use the printer from other PCs it's ok, I've also tried both in the wireless modality and with the USB cable but the result is the same: no installation!
thanks in advance fot your help.
denise

Hi @denig,
Welcome to the HP Forums!
I noticed that you are having trouble installing your HP Photosmart 5520 on Windows 8.1. I am happy to help you with this installation issue!
Please try the following solutions:
Uninstall the software. Uninstalling the Printer Software. (In case any was partially installed).
Clean boot the computer. How to perform a clean boot in Windows.
Make sure no antivirus programs are running. Turn Windows Defender on or off.
Make sure the firewall is disabled. Disabling the computer's firewall on a Windows 8 or Windows 8.1 computer.
Re-install using the HP Printer Install Wizard for Windows.
Hope this helps you resolve your issue, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

PSC 1410 printer all in one

I have a Hp PSC 1410 all in one printer wired to my desktop. How can I use it with my wireless laptop. Its on there but when i click it is is offline and I cant change it to online. Can use it fine on the desk top but I had anew hard drive pit in my desktop last week and since then something has changed that I cant get my printer to be online. on my laptop. Hp helped me set it up on my laptop when I got the laptop but now they wont help me as they say this printer has no support. I dont believe that. Wanted to sell me a new printer which i refused as this printer works fine.
Anybody know an answer to this problem?

Do you have the printer wirelessly connected to your network or ethernet connected to a router?
If so, then you should be able to print from the wireless notebook.
If you just replaced the harddrive, then it may be necessary for you to perform a new install of this printer. I would uninstall the old software and re-install with the most up-to-date drivers available here.
Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Printer (All-In-One) Suggestions

Can anyone out there give me a suggestion for a moderately priced decent printer. I got a suggestion in a Mac Store to get the Canon PIXMA 310 and the colors print horribly.
Any suggestions for one that is best compatible with Macs. All-In-One (Print/Fax/Scan) is best.

I recommend Canon models. Not sure what you consider modestly priced, but I recommend the Pixma MP610
Good choice, IMO. The MP610 is a minor refresh of the MP600, which consistently drew high praise from online reviewers (cnet.com, for example). Similarly priced HP printers do rather poorly -- and also seem to have chronic "driver issues." (I've never really looked at Epson or Lexmark.)
If you'll be using the printer's built-in SD card reader, be aware that only the latest models are likely to support the new high-capacity (4 GB and 8 GB) SDHC cards. The MP610 does, MP600 doesn't.
FYI. I'm not a Canon sales rep.
Me neither. Actually, I'm an HP shareholder.
Looby

New router (switched from Linksys to Netgear 750 - HP J4680 printer all in one - and MAC

My husband puchase a new router - (we were told our old router failed on us) - we had no problems setting up the netgear 750 from the linksys router we originally had - we have a MACBook Pro
My HP printer J4680 - ran beautifully before the router switch - now will only work when directly connected from MAC to printer.
We have had several people troubleshoot for us -( we live in the country - no IT personnel nearby) - no one can seem to get the connection going between the two devices - I reinstalled the printer - read and reread the troubleshooting manual on both router and printer - and performed all the recommendations listed. The basic setup instructions on the HF printer say that despite the proximity of the printer and the router the signal in only fair and that it appears to have a "security" issue - I turned off the firewall settings on computer - no change in status.
we are contemplating returning the Netgear 750 for another linksys - could someone please tell me how or if we can solve this problem w/o having to return the router?
We purchased this particular router for the MAC compatability - the wireless printer is fairly new <<5yrs old and never had any problems w/it.
IT REALLY APPRECIATE ANY ADVICE I CAN GET!! THANX - maggiemae03815

Welcome to the forums maggiemae03815
I saw your post about the connection issues you are having with your new router, Mac computer and Officejet J4680. I understand you have done some troubleshooting already however, I have a suggestion or two for you to try.
On your Mac, try:
Mac OS X: How to reset the printing system
Repair disk permissions
Restart the Mac
Re-add the printer (do not use the AirPrint driver)
Test print
Next contact the router company or your internet service provider to check the settings on your new router. There may be a setting that is blocking the connection to your printer:
Network name and password need to have no spaces or punctuation
If using WPA2 security, switch to WPA personal
Dual broadcast Wireless b/g/n (printer will only connect to g)
Mac filter needs to be turned off
Firewall settings need to be at there default settings, or set to a lower security
Multicasting "on"
Following ports need to be un-blocked:
Incoming (UDP) ports : 137, 138, 161, 427
Outgoing (TCP) ports : 137, 139, 427, 9100, 9220, 9500
I hope my post was informational!
Have a great Wednesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Payment check Sapscript prints all in one page

Hi;
we are facing a problem, days ago we printed payment checks with no problem, we prepare N amount of payment checks and send them to print and work ok.
Now, if we do the same all payment checks are printed in the first check.
We already did word documents with payment check size 8.5" x 8.5" page, and prints ok with N pages.
Any help.
David Fúnez
Tegucigalpa, Honduras

Hi,
Check whether you are using the same output device for printing or whether some changes have been done in the output device or device type.
Before printing, check the print preview of the payment cheque, whether it is correctly alligned or not.

Just saying thanks got wireless printer all in one

hi just wanted to say thanks received hp photosmart yesterday in perfect conditon am really happy with product just worked out every product ive got is all hp. thanks kylee
Kylee

Cannon has reasonable ink price and usage and you have the
ability to replace the print head if it ever clogs (that's
what always happened with the Epson's).
Actually, Epson's print head design is very different from Canon and HP. They put the "head" in printer not cartridge. This way you can keep re-using print head and save "resource", but it also means the print head nozzles would clog by dried ink or dirt. Indeed, the Epson cartridge is not cheap, it is because its ink can produce better quality of prints.
The alternitive way is to use Continuous Ink System, check this out -
http://www.InkRepublic.com
If you clog the print head, windex may do the trick, if not, try InkRepublic's cleaning solution too
http://www.inkrepublic.com/iRemove.asp
I suspect InkRepublic's cleaning kit, i-Remove, is to "suck up" the dirt or dried ink. This is different from other cleaning kit. They have very detailed installation information on their site:
http://www.inkrepublic.com/KnowledgeBase/iRemove.asp
good luck!
Power G5 Quad and Intel Mac Pro Mac OS X (10.4.3)

Help with HP printer all-in-one C4380

hi,
Can anyone help me. My printer keeps saying that there is a paper jam. There isnt any paper in the printer. I can't get it to work.
Many thanks,
Yossi

On the printer, press the Wireless button and then select the option to restore network defaults from the main menu. Now run the downloaded driver, then click on Reconfigure Network Settings, or Add A Device, and just follow the instructions to reconnect it to your new network.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

HP 4500 G510-n printer all in one

Similar Messages

Maybe you are looking for