HP 6110 All-in-one no longer prints...print jobs sit in queue

My printer worked fine last week and now I went to print somethign and it just sits in queue. I tried uninstalling/reinstalling the drivers, running the HP Diagnostic (which says everything seems fine) but nothing prints. Any ideas on how to get this working again? I also tried to print on my other laptop and that doesn't work either - so it's not an issue with this particular computer.
Any ideas would be greatly appreciated!

I have a similar problem but only with my vista pc. All print jobs sit in the queue, don't print. No problem printing on my mac. Please jhelp!

Similar Messages

HP Officejet 7410 All-in-One no longer 'automatically' print double sided

After upgrading my PC from Windows XP 32-bit to Windows 7 64-bit my HP Officejet 7410 All-in-One printer no longer prints double-sided automatically. When sending something to print I am presented with only two options: Print One-Sided or Manually Print on Both Sides. If I choose the latter I have to manually reload the paper when prompted. I have tried searching for updates and downloading drivers but nothing has resolved the problem. I've even gone into printer properties printing shortcuts and changed the settings in "Print on Both Sides" to 'automatically' and still I am prompted to reload the paper. It is a real pain when I have to print a very large slide pack especially when the printer decides to pick up two sheets at the same time. I have spoken to HP and they say my printer is old and they cannot help me. It is about 8-10 years old. Any advice would be gratefully received.

Hello Toosweet
In Printer Preferences make sure the duplexer is enabled. Do you have the full feature software installed?
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

6110 All-in-one sometimes will not print multiple copies

I have had this problem for sometime now. I searched the forum and found the Mopier solution for laserjets, but the 6110 does not have this setting. The same question regarding the 6110 went unanswered in the only post I found for it.
I am using the 6110 on WinXP Pro and connected by USB
Often times when I try to print multiple copies of a document (MS Word or MS Works as examples) I check 2 copies in the selection box but the printer only prints one copy. I then have to click Print again. What is strange is, sometimes it performs fine and others it will not print more than one copy at a time. Sometimes it SEEMS that if I change the "collate" checkmark it works, but proper functioning does not seem to be able to be recreated every time.
I do not get any error messages, the darn thing just acts like I have 1 copy selected rahter than two. I notice that when this happens and I go to print a second copy, the dialogue box has reverted back to 1 copy, but in those few times when it DOES print 2 copies, if I go back and select Print, it still shows 2 for the number of copies.
Any ideas? Thanks in advance

Hi there,
To make sure the software side of the house is in order lets try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Just installed HP BIOS Update. HP 6110 all in one printer no longer works.

Just installed HP BIOS Update. System no longer recognizes my printer (6110 all-in-one). HP web site says driver is in OS and should be recognized, but only driver that is close is 6100 series and it does not work.

Hey thecityhouse,
When you are selecting the driver from the available drivers list did you make sure to press the Windows Update button at the bottom right to prepopulate the list? This may have to be performed to get the proper driver for your printer.
If this does not work, then I would take a look at the information in the post found here. It may provide a workaround to the issue you are experiencing.
Hope this helps,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

How can I use Active Print on my Ipad and print to my usb connected HP officejet 6110 all in one

I was previously able to use Active Print on my Ipod to print to my usb connected HP officejet 6110 all in one. Now, however, with my Ipad version 2 I can no longer get this to work. Can anyone help? Thanks.

Hi,
HP do not provide any USB connection solution for iOS.
As Active Print is a 3rd party application which provide this functionality, i believe you may find a better help within Active Print support as they more familier with their application requirement and functionality:
http://www.activeprint.net/support/
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP 6110 All-in-one not able to do anything but print?

I have just purchased a late 2013 27" iMac with OS X 10.9.2 and I'm trying to get my HP OfficeJet 6110 All-In-One printer working. The issue is that the print function works just fine, but that's it. I haven't been able to get the scanning function working at all. The HP website shows specific instructions on installing the printer via the OS but it doesn't show the ability for the other funtions other than the "Generic PCL Printer" option when I try and install the printer. Does anybody have any fixes for this?

Scan – HP in 10.9
Scan Problems HP - Mavericks

Hp 6110 all-in-one always prints in color on Windows 8

I would like to print some color documents in grayscale. But I am finding that no matter what settings I use in the Print dialog panel, my documents always come out in color. I am in Windows 8.1. For example, in Microsoft Word, if you go to File->Print, the Settings list contains options for which pages to print, one-sided or two-sided, collated, etc., but there is nothing for color vs. grayscale. So, if you then click a "Printer Properties" link, you get the detailed 6110 dialog panel with multiple tabs containing the full range of printer options. Within that, if you select the "Color" tab, you can check the "Print in Grayscale" box. Click "OK" to close the detailed printer dialog, which brings you back to the Microsoft Word printer dialog, where you can then click "Print". Document still comes out in color. I have verified a similar behavior when priting color PDF documents - there is no way to make them come out in grayscale.
I suspect the driver is also not respecting my specification to use "Fast Nornal" print quality.
So, a very clever strategy for HP to sell more ink! Can you please provide a fix?
Thanks

Hi @UsedToWorkInHPL,
Welcome to the HP Forums!
I understand that your HP Officejet 6110 all-in-one always prints in color on Windows 8. I am happy to look into this for you!
According to your printer's specifications found at this website, Printer Specifications for HP Officejet 6100 Printer Series. This printer is only supported for these Operating Systems: Windows 98, Windows 98 SE, Windows 2000, Windows Me, Microsoft(R), Windows XP.
There is no full feature software and drivers for Windows 8.1 for this printer.
One option to try and get around this, is to assign an alternate driver, please see this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by @Shane_R.
Otherwise, I would recommend to please call our phone support at 800-474-6836 for your upgrade options to a printer that has the software and drivers available for Windows 8.1. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this information helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Driver for HP 6110 All in One Printer for MAC OS X 10.6.8

Your Search: Is the driver for HP 6110 All in One Printer the same for MAC OS X 10.6 as for MAC OS X 10.6.8?

Hi JCWG. To answer your question, Yes the driver is the same. Do you have questions about the install? Just in case you need it, here is the link to take you to the download of the software and drivers. http://goo.gl/njt723;
If you have any other questions, please feel free to write back
Thank you
Waterboy71
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

RE: HP 6110 all-in-one paper mismatch

My 6110 HP all-in -one won't do anything but tell me that it 'needs an alignment' press 'enter'. When I press "enter' a sheet of blank paper comes out right away and the display says,"paper Mismatch". I have tried all the paper sizes listed, to no avail. I can't get the printer to do anything else. I tried reinstalling the driver disk. too, but no use. Can anyone help me with this problem??

Hello CrossBear,
Welcome to the HP Support Forums.
Regarding the HP Officejet 6110 inquires you have about the USB cable and software, I would like to help. The USB cable needs to be USB 2.0 A-B, they are not product specific.
HP Officejet 6110 All-in-One Printer Drivers is where you can download the software and drivers for your Operating System if available. This printer does not have full feature software for Windows Vista, 7 and 8 for example.
Let me know if this has helped.
Thanks,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP 6110 All-in-One - Software availability

A friend gave me a used HP 6110 All-in-One, but did not include an installation disk or power cable. Where can I download the software? Please give me the link. Can I use any USB power connection cable or is there a product spesific transformer-type power cable available?

Hello CrossBear,
Welcome to the HP Support Forums.
Regarding the HP Officejet 6110 inquires you have about the USB cable and software, I would like to help. The USB cable needs to be USB 2.0 A-B, they are not product specific.
HP Officejet 6110 All-in-One Printer Drivers is where you can download the software and drivers for your Operating System if available. This printer does not have full feature software for Windows Vista, 7 and 8 for example.
Let me know if this has helped.
Thanks,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Deskjet all-in-one F4440 will not print

My HP Deskjet all-in-one- F4440 will not print. I have put in a new color and a new black cartridge. It clanks loudly when it moves back and forth. Finally it stops and then pulls plain paper through as though printing on it - does this two or three times. then it pulls plain paper halfway through and stops. I have to tug and carefully pull halfway paper back out towards front to remove.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? Are there any error messages or flashing lights? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Error code B81AA24C on my officejet pro L680 all-in-one ... can printer be fixed? how??? thanks..

error code B81AA24C on my officejet pro L680 all-in-one ... can printer be fixed? how??? seems to not power up ...thanks..

Hello
Is it possible to do a reset on the unit? Via: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00841912&cc=us&dlc=en&lc=en&product=2512009&tmp...
To try to get it in default mode
Kind regards
Best regards,
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
Although I work for HP my posts and replies are my own .....

Any suggestions for an all-in-one "cable modem router print server" (N)

any suggestions for an all-in-one "cable modem router print server" (N)?

If that's a problem with your cable company, change the company.
If your cable company is not able to provide you with a cable modem which gets you full performance for their service why would you bother with that company or try to make it better than them?
If you subscribe to a 100 Mbit/s service they must be able to provide you with a modem that does 100 Mbit/s and be able to demonstrate you 100 Mbit/s on your cable.
If they are unable to provide you with a modem which does 100 Mbit/s and thus cannot demonstrate that the service they have installed in fact can do 100 Mbit/s but only give you a 50 Mbit/s because that's the best they have, why bother buying yourself a better modem to find out whether or not their service does what it promises or not??
In addition, an integrated device won't get you better performance. On the contrary, consumer devices are generally single CPU (and core) devices. It's usually running some Linux or similar. If a single process gets overloaded it can drag down the performance of the whole device. For instance, let's say there is a bug in the print server software of the router. You print something and it hangs and the print server process on the router runs wild. Now the CPU is fully loaded and the routing performance will go down. If there is a bug in the routing software it will bring down the whole device and you can't even print.
You'll get the best performance if you use dedicated devices because then one device cannot overload another. Get a modem. Get a wireless ethernet router. Get a printer with integrated print server. That's far better.
It's like the all-purpose audio device compared to components...

IHP F2210 all in one deskjet, need to print in black, but prints in color

My HP F2210 all in one deskjet, is having printing issues. When I set it to print in draft in black ink only, it then prints in color, I just don't understand WHY, can anyone offer assistance?
thank you
miricro

Hi there miricro,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Hp officejet 6110 all in one printer wont work!!!! i need help!!!!!!!!

i turn on my printer and it says that i need to remove and check my cartridges. i did that a million times and it still says that same message. i dont know what else to do. any suggestions??? also, i dont know where to get a connection for my labtop to connect to my printer. where can i get it???

Hi,
There is not a scan driver for the 6100 for 10.6/10.7. The product was released in 2004, and reached end of life in 2008 (a year before 10.6 was released). Chances are that a driver will not be written for this product.
I don't have a 6110 here that I can test with, so all I can offer are steps that I would try given the opportunity.
One thing I noticed from your response on trying the 6210 driver was that the product (in the queue) was still showing as the 6110. I am curious as to how you went about installing using the 6210 driver. I can only think of two scenarios off the top of my head:
1) You had the 6110 installed, went to options and supplies, to the driver tab, and specified the new driver.
2) You had no products installed, and when you went to add, you specified the 6210 driver in the Print Using box prior to clicking add.
The option that is more likely to provide the scan option is option 2, so if you haven't tried it, I would encourage you to do so. If that doesn't work, try other Officejet All in one drivers, or consider upgrading if none of the above will get it to work.
I understand that the lack of a full feature driver is frustrating, but most (if not all) companies have dates in place to cut off development/support for their products. A similar scenario is the Netgear FA311 Network Interface Card. I remember using one of these cards back in 2000/2001, but if I wanted a windows vista 64-bit driver i'd be out of luck. I'd likely end up using a realtek driver (per a forum post suggestion) and see if it would work, and hope for the best.
Best of luck, I hope option 2 (if not already attempted) gets it working for you.

HP 6110 All-in-one no longer prints...print jobs sit in queue

Similar Messages

Maybe you are looking for