HP 8500 printer will not print fast on firefox, but does on Safari. HP support says it is a problem with firefox. Can you help me out?

Question
HP 8500 printer will not print fast on firefox, but does on Safari. HP support says it is a problem with firefox. Can you help me out? edit

Thank you for posting your list of installed Extensions. One of them might be intercepting the menu command. Since you have the Add-on Compatibility Reporter, it's possible that an older add-on that doesn't actually work well with Firefox 5 could be to blame. Could you try disabling the "HP Smart Web Printing" extension and see whether that makes any difference?
Also, you can simulate a print button on a web site by pasting this to the location bar and pressing Enter. You also can save it as a bookmark for easier access (when scripts are saved as bookmarks, we call them bookmarklets). Hopefully you won't need it for long.
<br>javascript:void(window.print());

Similar Messages

  • HP Photosmart 6510 series network printer will not print black after changing cartrage

    HP Photosmart 6510 series network printer will not print anything that is black or has black in the picture after changing cartridge, all other colors are working properly after changing. Does not look like any damage to the cartridge or the insert where you plug in the ink. The well where the ink pad and the cartridge meet is damp with black ink. So not sure what is going on

    Hello dinger57 and welcome to the HP forums!
    I understand since changing the black cartridge the black ink has not been printing. I'm sorry to hear this, but I will definitely do my best to lend a hand
    I will suggest that you start with following through this Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages document. If the issue persists after that can you please let me know what country you're in and whether the printer is in or out of warranty? Thanks! Please feel free to private message me the country information.
    Hope to hear from you soon!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • My wireless HP Deskjet 3050 printer will not print from web sites.

    My HP Deskjet 3050 J610 printer will not print from web sites - it prints ok from WORD, etc. I keep getting the error message: "An unknown error occurred while printing." This problem only arises with Firefox browser.
    The printer is connected wirelessly to a network and this occurs when I use a laptop on the network. It is also connected via cable to a desktop computer but there is no problem in printing from the desktop.
    Any assistance would be appreciated.

    That sounds as if you need to investigate to see if you were able to clear all of the paper that was causing the jam. 
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Just had problem with frozen up Mac computer corrected,now HP printer will not print.  Says printer not connected.  What is wrong?  Everyday a new problem., help.

    JJust had problem corrected due to frozen imac, now HP printer will not print.  Says it is not connected.  What do I do to fix it?

    To reset the printing system:
    Choose System Preferences from the Apple menu.
    Choose Print & Scan from the View menu.
    Hold down the Option key while clicking the "-" (Remove printer) button. If no printers are currently added, hold down the Control key while clicking in the box that appears above the "+" (Add printer) button, then choose Reset printing system… from the contextual menu.
    When you've done the above you'll need to re-add the printer by clicking the + (Add printer)

  • Printer will not print coupons

    printer will not print coupons

    Are you both trying to print from a web-brower like IE9? If you are, I would first recommend trying a different browser, below are the links for both Mozilla Firefox and Google Chrome. 
    https://www.google.com/intl/en/chrome/browser/?&brand=CHMB&utm_campaign=en&utm_source=en-ha-na-us-sk...
    http://downloads.yahoo.com/firefox/
    Let me know if this helps! 
    PS if this is related to ePring coupons, then that is another can of worms entirely! 

  • OS X 10.6.7 Canon All-in-One 480 Printer will not print files, only blank pages. Have to go to Utilities, Disk Utility  and Repair permissions for a temporary fix. How can I get a permanent fix?

    After upgrading to OS X 10.6.7., my Canon All-in One MP 480 printer will not print. it says it is printing, but the sheet of paper just runs through the printer and comes out blank. I finally went online to just answers.com and got a fix involving the System preferences, printer and fax. i was told to go to Applications in the HD, thenUtilities, then Disk Utilities, highlight the HD and check on Verify Disk. If it says Disk is OK, click on Repair Permissions. At first, that worked, but the next time I went to print after turning the printer off, it refused to print and just ran the sheet of paper through blank. Once that happens, there is no way to go back to printing the file that failed. I fiinally had to copy and paste the info from the file that would not print and put it in an email to myself and then print that. This is very frustrating, and I would really like a final solution for the problem.
    bettyfroomneedham

    There's a lot there, so I'll start with the parts I can answer quickly.
    The "ACL found but not expected..." messages can be safely ignored, so says this article
    http://docs.info.apple.com/article.html?artnum=306925
    (look below all the "SUID" examples)
    I had changed my Desktop image earlier but when the "Installing 1 item" window came up it changed back to the back ground that you first see on your desktop after installation.
    Leopard installs updates a bit differently. If it's simply an application that does not change system files, it installs them like before, without having to restart. If the update is to the system, then you must immediately "restart," It then goes to that stars and purple screen to perform the installation. Before, it would do the installation while you still had control of the Mac and would prompt you to restart when it finished the installation. This change probably make things more secure and reliable, because you aren't allowed to do other things on the Mac while system updates are being installed.
    Please post back with the remaining point of concern.

  • Printer will not print most web pages.

    Wireless Photosmart all in one Printer will not print most web pages.  Everything elso prints consistantly but cannot determine why web pages generally do not print.  It soes not seem to matter whether I click file - print or control P  or clicking the print Icon. The print icon appears at the bottom of the screen for a couple of seconds then disappears & nothing prints. Is there a setting I am missing?

    Hi. Go to this link http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114788&cc=us&dlc=en&jumpid=reg_R1002_USEN&lc=... and download the PDU and run it.
    Feel free to provide Kudos if I have helped you!

  • Printer will not print E-mails

    I have an HP Officejet Pro L7680 All in One printer.
    I have recently re-inatalled all diagnostic tools/software and troubleshooting software.
    As per these it shows no errors.
    The printer will not print e-mails but will print most word documents.
    Can you help?

    My printer will not print e-mails, nor will it print photographs within the body of a document.  
    What am I doing wrong?  I just started having this trouble recently 

  • Printer will not print word documents or documents from internet however does a test print

    My printer will not print word documents or documents from the internet.  However it does complete a test print.  I have uninstalled and reinstalled printer.  I have disabled and enbled the firewall and have run the test doctor programme, which has been unable to identify any problems.  I have a HP deskjet 3050A all in one J611 series printer.

    Sorry that you are having a problem with printing word documents and internet. 
    Are you connected USB or wireless?
    You can try to download an alternative driver and check to see if that works. (Shane_R) has a great post on how to do so. 
    The deskjet 990c is usually the better one. 
    http://h30434.www3.hp.com/t5/Printer-All-in-One-So​ftware-Drivers-e-g-Windows-8/How-to-Assign-Alterna​...
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • Epson 777i printer will not print

    Epson 777i Printer will not print
    I am using an imac with the Epson Stylus Color 777i printer,Gutenprint v5.2.3 and also the Epson 580 printer.
    Yesterday the 777i stopped printing.  It is in the paused mode. I have replaced the ink cartridges and have tried to
    perform troubleshooting but, the printer will not respond to any commands.  The green light is on, neither of the
    other two lights are on.
    The 580 printer is working with no problems.
    I need some assistance to get the printer back on line if at all possible.  I am not too tech smart, but can follow
    directions well.
    Fred Holmes
    Lompoc

    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    10.5/10.6/10.7/10.8 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

  • Epson R200 printer will not print

    with an intel mac with osx 10.6 and adjusting in the firefox print window
    as necessary my printer will not print. The Epson print icon appears then deletes. In the print queue there is a blank.
    The printer works well with Safari

    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    10.5/10.6/10.7/10.8 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

  • Epson pro 3880 printer will not print photos with mountain lion

    epson stylus pro printer will  not print photos  using mountain lion ??

    The drivers that come in the box with the printer are already obsolete by the time it is placed into service. If Software update does not send you new epson drivers, check the epson web site.
    Remove [-] button and re-Add [+] button the printer after the driver update.

  • My printer will not print in black ,i replaced the ink and now it will not print in black ink

    my printer will not print in black ,i replaced the ink and now it will not print in black ink

    Please read this post then provide some details.  What printer model? What operating system? Are there any error messages on the printer or computer screen?
    Is your printer still in warranty? You can check with HP's warranty tool here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • **HELP** My C309a printer will not print!!

    I have a C309a HP Photosmart Premium printer. I operate it thru a wireless att dsl modem. Suddendly, after some HP update, it no longer responds to the Print.  I have run several self diagnostics online. Thus, I first made sure the wireless connection is operative (YESI disconnected and reconnected just to make sure) then 1: uninstalled the Printer driver. 2: Installed the CD printer dirver. 3:Unistalled the CD printer driver. 4:Installed and unistalled the HP website drived for windows 7 64 bit (three times).  I have called HP tech support and was helped by a friendly guy who had me repeat step 4 two more times . We have concluded A: the the printer is indeed connected to my wireless network. B: the copy feature works on the printer. C:the Scan feature works and successfully uploads the scan onto my computer. However, the the printer will not Print!!  When I hit the print button on a document, web page, or anywhere on the computer the printer does nothing!! The test page on the HP site does nothing as well.  Not a whisper.  Anoher odd thing is that I cannot  augment my printer properties (the window that allows you to select draft, black and white printing only, or paper size).  When I hit this button I am receiving some OXE..... error window.  The HP tech stated that i had to have ink in all of the cartiriges for it to respond to print and attempted to sell me some over the phone.  My color and photo black ink have been dry for over 8 months. CAN ANYONE HELP ME???!!!!

    Well, I think the simple answer is that, yes, you have to have ink in all of the cartridges for the printer to print.
    You can also download and run this: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03286146&cc=us&dlc=en&lc=en
    What does it say?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • My printer will not print the body of my emails

    My HP printer will not print the body of my emails.

    Hey hcwooten,
    I see you are having an issue with your printer producing outputs of only the top of the page.  I would like to help, but need a little more information to best assist.
    What model HP printer do you have?
    What is the operating system of the PC you are using to print from?
    How is the HP printer connected to this PC?
    Do you have the full feature software installed on this PC for your printer?
    What program are you printing from?  Does this happen only in specific programs or all programs?
    Have you tried running the HP Print and Scan Doctor?  This is an automated troubleshooting tool that fixes many printing/scanning related issues.  
    HP Print and Scan Doctor
    http://h30434.www3.hp.com/t5/Other-Printing-Questi​ons/Want-Good-Answers-Ask-Good-Questions/td-p/2094
    Jason
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

Maybe you are looking for

  • Mail wont open after snow leopard update

    Mail refuses to open after update,when initated it flashes in the tray then disappears,has apple a fix for this problem? Or admits it exists. Thanks

  • Space removed from character data type when move to internal table issue...

    Hi Friends,                     I converted material code and other details into internal table which have corresponding data types.But in internal table,I can see material code as left justified ,but after that space was removed.For example if mater

  • I want to do a clean reinstall of itunes...

    If I uninstall itunes, delete all of the folders and reset my ipod to factory settings, can I reinstall it and redownload the music and movies I've purchased? I don't want to lose all my Battlestar Galactica, Chappelle and Heros Thanks!

  • Most efficient video file format

    Hi - I have been trying to use FMLE to stream video files to Ustream. I am using several virtual camera programs at the moment like ManyCam, Fake Webcam (does not work with FMLE apparently), etc. If I understand correctly what is happening - the virt

  • Dual Core with 2 different processors in a Satellite A100-599!!??

    Hello, My Satellite A100-599 is a Core 2 Duo T7100 2.00 GHZ. In Device Manager, under Processors, I have 2 processors: Intel(R) Core(TM) 2 CPU T5500 @ 1.66GHZ Intel(R) Core(TM) 2 CPU T7200 @ 2.00GHZ Is this normal? Shouldn't I have two T7200 processe