Hp color laserjet 4730mfp series

how can i scanning and save the photos to my computer by HP Color LaserJet 4730 series ?

According to the spec sheet for the Laserjet 4700n printer, this printer only has these methods of connectivity. Unfortunately, wireless printing is not mentioned.
Laserjet 4700n connection methods:
Enhanced input/output (EIO) card slots for optional connectivity. (Network connection using an HP Jetdirect embedded print server is standard on HP Color LaserJet 4700n, HP Color LaserJet 4700dn, HP Color LaserJet 4700dtn, and HP Color LaserJet 4700ph+ printers.)
USB 2.0 connection.
HP Jetdirect embedded print server to enable network connectivity without requiring use of an EIO slot.
Standard bidirectional parallel cable interface (IEEE 1284-C compliant).
Auxiliary connector.
Both USB and parallel connections are supported, but cannot be used at the same time.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Similar Messages

HP Color LaserJet 2550 series

Hi,
I installed the HP Printer Driver Pack available on the Apple site for my HP Color LaserJet 2550 series printer. It works, but there are some odd things here.
First, the driver can't read the printer state. Like how much is left for each colour and things like that. It just says, No information available.
Second, When I print after I already printed something else the printer will be unavailable according to the driver. I need to turn of the printer and back on for it to print again.
Third, When there is an image on one of the pages (LibreOffice) it takes forever for that page to be printed.
Via the App Store I get new versions of the driver pack, so I am up to date.
Also, when I connect this same printer to my Laptop (Linux) everything works. These are HP drivers for Linux. My laptop can read the printer and ink/toner status. I don't have to turn off the printer after each job and images print a lot faster. Ok, real big high ress photos not, but normal images just roll out. Whilst on my Mac it takes minutes.
So in my opinion there is something wrong with the driver. I reinstalled the printer, and due to some other issue I reinstalled OS X but the problem remained.
I hope there is a resolution for this.
Thanks,
Ricardo

I managed to get some success by rebuilding as described in another posting:
Dominique Simon
Re: HP Laserjet 2550L prints one job then hangs
Jun 15, 2012 2:13 AM (in response to Fami R.)
I had this issue too with my HP 2550. No more printing after the first printjob possible
I managed to get the printer working as expected by removing the hp_io_enabler kext.
sudo -s
mkdir /Valhalla
mv /System/Library/Extensions/hp_io_printerclassdriver_enabler.kext /Valhalla
exit
Wait for the systemcaches to be rebuilt and reboot. You can see if the caches are being rebuilt by opening the Activity Tool, the process is named kextcache.
You need to have the Valhalla Folder in root of course.
Not very mac-like, but it works

HP Color LaserJet 2800 series 2820

Question
Why is it, that the software delivered by HP them selve, isn't working as it should?
I've installed the DVD on 10.5 and I could scan, but not print.
After an uninstall of the DVD I could print, but not scan.
Now I've upgraded to 10.6.1. As I've read, several drivers are installed when needed. But as the Apple paged shows, no scan support for my printer.
Why doesn't HP make a print/scan driver so my expensive All-in-one printer could FINALY work as it should.
Is there a driver out there for Snow Leopard that does the trick of print/scan functionality?
Are there more people who are experiencing this problem?
Why does HP says it has OSX support for it's printer, if the driver AND installation software are of the minor quality?

Jonathan,
The Color LaserJet 2800 series is NOT support under Snow Leopard for anything other then print. You may try installing the 10.5 software to try and get things running again. It can be obtained [here|http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp? lang=en&cc=us&prodTypeId=18972&prodSeriesId=445194&prodNameId=445195&swEnvOID=21 9&swLang=8&mode=2&taskId=135&swItem=ly-58934-1], no guarantees it will work though.
Just trying to help.
Andrew

HP Color LaserJet 3600 series (VISE Installer)

Hi everyone,
I made the mistake of using the VISE Installer that HP suggests as a download for the HP Color LaserJet 3600 series printer. I installed it, and then couldn't figure out why I still couldn't see this printer driver. After reading http://docs.info.apple.com/article.html?artnum=303057#hpdrivers and learning that the "driver" included for the Color LaserJet 3600 is not a "Modern Driver", I realized that installing the VISE installer from HP does me no good.
Now, I have two questions:
1) How can I uninstall this stuff that HP crammed onto my system? The VISE Installer seems like its a blast from the pre-OS X past, and doesn't appear to offer any sort of uninstallation. Do I need to write up a shell/AppleScript to read the log it writes to my / and remove the files manually? (I'd rather not do that, but I will if I have to).
2) Is there a PPD that anyone knows of for this printer? I'd like to be able to print to it over our network, and I need a "Modern driver" (i.e. PPD) to do that.
Thanks dudes!
MacBook Pro 15.4" Mac OS X (10.4.8)

To get a modern driver, you'll have to install a few open source packages. Try hpijs and ESP ghostscript from here:
http://www.linuxprinting.org/macosx/hpijs/
(I think you have to use the 3500 model choice/PPD).
If that doesn't work, you'll have to compile the driver:
http://www.linuxprinting.org/showprinter.cgi?recnum=HP-Color_LaserJet3600

HP Photosmart 3210 installed on my iMac But is showing as but is showing as HP Color Laserjet 2800 series PS which means I no longer have access to all the paper options especially the photo tray

I have recently purchased an iMac running Lion. The HP Photosmart 3210 printer was connected through the network and I was happy that it recognised the printer - good old Mac's!!
However, when I tried to print some of my photos from the photo tray, the option was not available and when I looked at the printer properties, it was showing as a HP Color LaserJet 2800 Series PS which does not have all the paper options I had before. Reinstalling the software from HP did not make any difference - do I now have to buy a new printer as well???

I suggest opening the Print & Scan System Preferences, then highlight your HP Photosmart printer in the printers list and delete it by pressing the minus sign. Now, re-add the printer by clicking on the plus sign and select the printer. Make sure that the 'Print Using:' pull down aut selects the correct driver for your printer. If it doesn't, pull down the list and manually select the correct driver using the 'Select Printer Software' option. Hopefully that will resolve your issue.
HP Printer Support for Mac OS X

HP Color Laserjet 4700n series

Hi, I am trying to install wireless printing on my HP Color Laserjet 4700n printer in my office with three different computers. However, I am having trouble finding out how to do this on each computer in the office. I would appreciate if someone could help me with this or even tell me if wireless printing is possible with this series. Thank you.
This question was solved.
View Solution.

According to the spec sheet for the Laserjet 4700n printer, this printer only has these methods of connectivity. Unfortunately, wireless printing is not mentioned.
Laserjet 4700n connection methods:
Enhanced input/output (EIO) card slots for optional connectivity. (Network connection using an HP Jetdirect embedded print server is standard on HP Color LaserJet 4700n, HP Color LaserJet 4700dn, HP Color LaserJet 4700dtn, and HP Color LaserJet 4700ph+ printers.)
USB 2.0 connection.
HP Jetdirect embedded print server to enable network connectivity without requiring use of an EIO slot.
Standard bidirectional parallel cable interface (IEEE 1284-C compliant).
Auxiliary connector.
Both USB and parallel connections are supported, but cannot be used at the same time.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Slow printing copies to HP Color Laserjet 400 series

This issue first appeared on 10.8, and still there... Not sure if it is a feature or bug
HP Color Laserjet M451 with ethernet connect and 386 MB ram. Mac 10.9.3 with latest print driver from HP.
Let's say my document has 5 pages, text and graphics, it will print fine speed wise. Say it takes about 30 sec to spool, process and print the one page. THe rest of the document print at good speed.
If I decided to print 8 copies of this document, and select 8 copies in the print setting, it will essentially submit the print job 8 times so after the first job is done, i will have to wiat for it to process the file and spool it to the printer, etc. it will take a long time. It does not matter it is Word, PDF (using Acrobat reader or Preview), or PowerPoint, same time of respond.
Same printer, network and file print from Windows 7 will spool, process once, and then the printer will just fly thought the copies as if it is all one document, so i can get this done in say 1 min. The printer print fast after 1 page.
So. Let's say I want to print 1 page of a document (it can be just text), and say i want 50 copies. then forget it. It will sit there and spool, process and etc each page for 30 sec. And windows 7 (even xp) will treat it like it is printing one document of 50 pages.
Any idea if this is a feature of Mac or HP? couldn't be HP if windows 7 print ok.

This works for me, because I'm tired of waiting for Adobe to find solutions: open your pdf document with Preview and print from there. It will print cleaner and faster than any Adobe application.

Fuser error for HP Color LaserJet 3600 Series Printer

My HP Color LaserJet 3600dn Printer have Fuser error message. What is the problem ?

The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
You can also view the article related to this product here:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Hp color laserjet cp4020 series black printing too light

Our company bought an HP Color LaserJet CP4025 about 2 months ago. It printed perfectly through our first deadline, but when we changed the black toner cartridge, it now prints somewhat brown or gray and the colors aren't quite as bright. What can we do to fix this?

So the other colors are printing darker / or look normal? If Only the Black is faded even on the config page relative to the other colors present, or in other documents?
Do you have another cartridge to test out if this is a cartridge issue?
In the Service manual it indicate the if print is light or faded in a particular color there may be a poor primary transfer bias contacts on the ITB unit and product, or porro primary charging bias contacts with the print cartridge and product, or poor developing bias contacts with the print cartridge and product
Solution: Clean the contacts of the color that produces the light print. If the problem remains after cleaning check the contacts for damage. Replace any deformed or damaged parts.
http://www.scribd.com/doc/77359204/CP4020-CP4520-Service-Manual#outer_page_60
I work for HP

HP Color LaserJet CP5520 Series cant sign in to WEB administration

I need to update printer CP5520 firmware, but there no USB port on printer. So, I need to sign in by administrator user into embedded WEB server.
What is USER NAME and PASSWORD for CP5525 series in web administration? How I could setup password?
In user manual there is no instructions setuping administration password at first time. In user manual, on page 66 writed about password changing, but it works, if user is just connected.

Hi certa1n,
Welcome to the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

I cannot download a new driver to my HP Color LaserJet 3600n printer (I'm using Windows 7) - help

any help appriciated

@vincepay
Here is a link to the drivers for the HP Colour LaserJet 3600 windows 7 drivers:
HP Color LaserJet 3600 Series Printers World Wide Printing System - 64 bit driver for windows 7
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Hp color laserjet cp1518ni color does not align???

I recently posted at the beginning of the month saying I was having problems with my hp color laserjet cp1518ni and the whole left side printing blurry. After cleaning the rollers, running it through the cleaning mode, restoring the defaults and calibrating the colors, it miraculously worked.
But less than a month into the fix and I am once again having problems. I have done all of the following (I have windows vista 64bit):
*updated firmware and confirmed that it is updated to most current version 20120110
*restarted computer
*turned off printer - more than once
*disconnected printer - more than once
*restored defaults - more than once
*calibrated color - more than once
*run it through the cleaning mode - more than once
I have taken each toner cartridge out and carefully placed them back in again making sure they were firmly in place.
My husband has tried connecting it to his computer and printing it, but has gotten the same results.
I was trying to print out a job when I noticed that the color was horribly off from what was on my computer screen. Since I was 5 prints away from needing to change the cyan cartridge, I changed it, thinking this would fix the color. Not only did it not fix the color, but that's when the alignment problems started happening. I am so completely frustrated. It is ridiculous to have this kind of problems with a printer every time you try to print and I've spent the last 3 hours fighting with it.
I am absolutely, without a doubt, certain it is the printer. I don't know what it is, with the printer, so if anyone has any advice, I would greatly appreciate it. I just opened a 3 pack of toner (to put the cyan in) so now not only can I not use the printer, but I am out money for the other 2 toners.
The reason I know it is the printer, is because I finally I printed the same exact piece I had been printing on the hp color laserjet cp1518ni that looked horrible in both color and color alignment, onto a Canon MG6120 inkjet. The color was exactly as it appeared on my computer screen and there were no problems with misalignment. I just prefer to do my jobs on laserjet printing, so this is frustrating to have a large, expensive doorstop in my computer room.
Any help is much appreciated.

I wanted to add one more thing, as I was looking through the Resolving Print Quality Issues page
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01691481&tmp_task=solveCategory&cc=us&dlc=en&lc...
I have printed out a Diagnostics Report and it's obvious that there is a problem. Under Solution #11, it tells you how to
Identify and replace the problem print cartridge
Because it allows you to print and see:
The page prints five bands of color, which are divided into four overlapping sections. By examining each section, you can isolate the problem to a particular print cartridge.
I have done a search on my computer for:
HP Color LaserJet CP1510 Series ToolboxFX and it does not come up. I am able to do everything through the printer itself (run the cleaning mode, etc), but as far as finding anything on my computer under a folder, there doesn't appear to be anything.
I'd like to be able to print out these pages so that I can see which colors are giving me problems. Is there a way to do that from the printer?
Thank you!

Color LaserJet HP 2550

My system is a MacPro Mid 2010 running Mac OS X Lion 10.7.5. I am having problems with printing on my hp color laserjet 2550 printer. It is connected via a USB connection on one of the front ports. The issue is that I must power cycle the printer to submit a print job successfully to the printer. Otherwise, I get a message stating "busy waiting for the printer" when submitted the second print job even though the print queue shows the state of the printer to be in a "Printer Ready" state. So, it simply cannot mantain a proper connection with the printer. When the data successfully gets to the printer, it prints as expected.
I am currently using the Apple supplied HP Printer Software Update version 2.11. The installed printer driver is the "HP color LaserJet 2550 series" version 18.4. The problems have persisted no matter how many updates Apple has provided. HP's support basically says that it is supported by Apple and it should work with the drivers that Apple supplies.
Any suggestions would be greatly appreciated. I've tried many of the suggestions on this forum, but none have worked. I noticed that one person simply bought a new printer.

I managed to get some success by rebuilding as described in another posting:
Dominique Simon
Re: HP Laserjet 2550L prints one job then hangs
Jun 15, 2012 2:13 AM (in response to Fami R.)
I had this issue too with my HP 2550. No more printing after the first printjob possible
I managed to get the printer working as expected by removing the hp_io_enabler kext.
sudo -s
mkdir /Valhalla
mv /System/Library/Extensions/hp_io_printerclassdriver_enabler.kext /Valhalla
exit
Wait for the systemcaches to be rebuilt and reboot. You can see if the caches are being rebuilt by opening the Activity Tool, the process is named kextcache.
You need to have the Valhalla Folder in root of course.
Not very mac-like, but it works

My HP Color Laserjet CP 1215 recently started printing crooked.

My Printer at work, HP Color Laserjet CP1215 recently has started printing crooked. I have open all doors to check for anything stuck in the printer that could be causing it to print crooked.
Any suggestions would be greatly appreciated as I am not getting anywhere with what I have found on the website.
Tawnya Slagle

Hi Tawnya,
A couple of items come to mind that we can check:
1) Paper type/specs Make sure you're using recommended paper type for this product.
2) Remove, restack and reload and check paper guides in the tray to ensure the guides are against the paper and if available, restock with some fresh paper.
3) Have you recently experienced a paper jam? Were you able to remove the page intact? If not, there still may be a small piece of paper lodged in the printer causing the skew.
4) If the above steps don't resolve, I might recommend a calibration, steps listed below.
Best of luck!!
Follow these steps to calibrate the product.
Open Toolbox .
Windows XP: Click Start ( ), click All Programs , click HP , click your product, and then click HP Color LaserJet CP1210 Series Toolbox .
Windows Vista: Click the Windows icon ( ), click All Programs , click HP , click your product, and then click HP Color LaserJet CP1210 Series Toolbox .
Click the Device Settings folder, and then click the Print Quality page.
Under Print Quality , click Calibrate next to Calibrate Now .
Click OK when the 'Your request has been sent to the device ' message appears on the computer. The calibration process begins.
NOTE:Calibration might take 2 to 3 minutes. Do not turn the product off during calibration.
When calibration ends, try printing again.
If the issue is resolved, stop troubleshooting.
If you are still experiencing print quality issues, repeat steps 1 through 5 in this solution. You can recalibrate the printer as many as 3 times.
(Although I am employed by HP, I am speaking for myself and not for HP)
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

HP color laserjet CP2025 will not print. Help.

I have a HP color laserjet CP2025, but it will not print. I installed the driver HP Color LaserJet CP2020 Series PCL 6. I have a Windows Vista Home Premium. There is a message to replace the cyan cartridge, but I assume if the printer has black ink, then it'll print in black and white. Do I need to replace the cyan cartiridge for it to print? What other options can I try to troubleshoot?
Thank you.

@kesler
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Hp color laserjet 4730mfp series

Similar Messages

Maybe you are looking for