HP Color Laserjet 5550dtn Printer problem

The printer keeps printing out the same two color copies on 11x17 paper then follows with page after page of code that will not stop.  Any idea of how to stop this would be helpful...

Hello
it is good to check if you have the latest FW installed: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18... 
And youa re using the appropriate driver: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1140731&...
For a color check: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01345578&prodT...
Also it might be tried to change manually the color options in the driver settings: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00660138&prodT...
If the slow printing happens with PDF please see: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
Kind regards
Best regards,
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
Although I work for HP my posts and replies are my own .....

Similar Messages

  • HP Color LaserJet 2605dn printer problem

    I upgraded to Windows 7 and my HP LaserJet 2605 dn is now printing very very slow printing and the colors (especially red/orange) are not correct.  Can you help?

    Hello
    it is good to check if you have the latest FW installed: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18... 
    And youa re using the appropriate driver: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1140731&...
    For a color check: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01345578&prodT...
    Also it might be tried to change manually the color options in the driver settings: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00660138&prodT...
    If the slow printing happens with PDF please see: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
    Kind regards
    Best regards,
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    Although I work for HP my posts and replies are my own .....

  • HP Color Laserjet 3600 Printing Problems with Airport Extreme & JetDirect

    I have a HP Laserjet 3600n connected via ethernet cable to our Airport Extreme base station using the built-in JetDirect functionality of the printer. Prior to installing Snow Leopard we had no problems and every computer on the home network could see and print with full functionality on the printer.
    After installing Snow Leopard, it took a while but I got the printer working again with the same setup. Then we had a power outage and the printer was no longer visible on the network or in the airport settings. Again it took a while but I once again got it to work. But now it seems like it keeps falling off the network and the printer itself either shows an IP address of 0.0.0.0 or another random one. The IP address should be generated by DHCP by the airport.
    I don't know if this is a problem with Snow Leopard, the airport extreme, or the printer. The way I got it to work the last couple times no longer fixes the problem. Someone please help.
    Message was edited by: balistikboy

    I don't know if this is related, but...
    My MacBook Pro (Airport) has always been dicey connecting to an HP LaserJet 4000 on my wired LAN. Before Snow Leopard, I used AppleTalk rather than IP printing because it just worked.
    But Snow Leopard doesn't support AppleTalk any more, so I reinstalled the printer to connect via JetDirect (which supposedly provides more features). When it works, it works fine. But very often I get a message that it can't connect to the printer. The only thing I've found that fixes the problem is power-cycling the printer, which somehow enables queued jobs to print. Needless to say, this gets old.
    Is there some trick I'm missing?

  • HP color laserjet 2600n - printing problem.

    When the my HP color laser jet 2600n print a page, it is no question if this is blank or colored, the paper show 2 vertical strips constiued for more parallel very thin lines.
    One strip is large about 1.2 cm at 3,5 cm from the edge; the other is large about 0.5 cm at 4 cm from the opposit edges.
    The color of the bands is primarily cyan - green.
    The intensity of the strips is different from any print.
    The problem is increased quickly.
    The levels of any toners are about 45%.
    The HP page print test for the toner cartige do not show any problem (however there are even the 2 verical strips).
    The tranfer roller, after the printig proces, is no clean and present the sames strips above described.
    I cleaned by a liquid soft cleaner the transfer roller and other part easily detachable and finding in this the presence of dirty then removed: any improvement.
    I observe that the photosensitive drums of the cartrige toners (cyan e magenta) are not perfectly clean: it present traces of toner in corrispondence of the bands.
    I think about a phenomenon of fat dirty  that has propagated from the rollerr to the drums.
    Some other user has already found my problem?
    Could I look for to resolve without resort to the after-sales service?
    How to can eventually clean the drums?
    Sorry for my bad English.
    Thank you.

    1. take out all of the ink cartriges and look at the big black roller on the door for streaking, if streaking, clean with a lint free cloth dampened with windex (window cleaner) then close the door.
    2. let it run to initializing.
    3. open the door and look and the black roller on the door to see if you have streaking. If no streaking put one cartridge in and close the door and repeat the steps until you find what cartridge is causing the problem.
    I did this and found that my cyan was creating the lines on my paper. I cleaned the cyan roller with a Qtip and some rubbing alcohol and it works fine now, no more lines on the paper.
    Cheers

  • Printing problem with HP Color Laserjet 3000 printer

    I am using HP Color Laserjet 3000 printer, it is configured in SAP ECC6  with SPAD with device type "HPLJ4    : HP Laserjet 4 series PCL” and access method = “L: Print Locally Using LP”
    At HPUX level printer in configured with proper driver also.
    When I print from SAP, I get following error
    "Invalid option, Please refer to MAN page for valid options" as attached
    Other then above line , nothing else comes
    Please help,
    Al Mamun

    Hi,
    Make a try using the device type HKSAPWIN and the access method is front end prinitng.
    Also make sure that you are able to take the print out using the os(printer should be configured at os level first).
    Regards,
    Vamshi.

  • HP Color LaserJet 1600 Printer

    I really love my HP Color LaserJet 1600 printer but haven't been able to successfully install it in my brand new MacBook Air 1.7 despite several attempts.
    I have downloaded the correct Firmware Upgrade 20120928 v2.4 from HP Drivers web page. Unlocked RFU to ON position and installed the firmware. Added HP Color LaserJet 1600 Printer via USB, as required and my MacBook correctly identifies it as such. Though the driver I have chosen is HP Color LaserJet 2605 since the one for 1600 is not available in the database. The printer responds positively during the upgrade but later does not print. I can see the print command being transmitted to the printer but it stays dead.
    Please help and let me know stepwise how to do it correctly.

    Just upgraded my printer to HP Color LaserJet Pro 200 M251nw.... Problem solved.

  • HP Color LaserJet CP2025 Printing Issue

    HP Color LaserJet CP2025 - prints only in B&W - how do I set the printer to print in color?
    The latest driver has been installed.

    Hi Yahootie, 
    This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links. 
    http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support 
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413 
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • My HP Color Laserjet CP3525dn printer is only printing parts of my document in colour.

    Hi All
    I am having a problem with the office HP Color Laserjet CP3525dn printer.  I am a novice and the tech guy we use is on holidays!  We are using windows 7 with hardwired connection.  The problem is that it is only printing some parts of my documents in colour.  Some documents are being printed completely in B & W!  Any ideas?  Thanks

    Hi trixie49, 
    The link below is to the guided troubleshooting utility. Since this is a commercial LaserJet printer you should also post your question to the second link below. 
    http://h20584.www2.hp.com/hpgt/guides/select?lang=en&cc=us&prodTypeId=18972&prodSeriesId=3690646&lan...
    http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Color LaserJet 2600n printing 2 green horizontal lines

    Have a Color LaserJet 2600n printing 2 green horizontal lines on each printed copy.

    Hi.
    Can you measure the distance in millimeters between the two lines and post a reply back?
    Kazman
    I am an HP Employee
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • HT1338 i can't attach my hp color laserjet cp1215 printer.

    i can't attach my hp color laserjet cp1215 printer.

    Adhvaresh,
    "attach" is a word we usually use for plugging in cables - but I don't think that is what you mean.
    If you want a driver for that model laserjet, I suggest you use the foo2hp set of drivers. Install Foomatic and ghostscript from here:
    http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/foomat ic
    Then, install foo2HP from:
    http://foo2hp.rkkda.com/

  • Bad photo prints on HP Color LaserJet CP5225dn Printer

    Hey all,
    Having an issue outputting photos on my new HP Color LaserJet P5225dn printer from Adobe products. Am curious if anyone else might have run across the same issue and possibly found a solution. Here's the background information...
    Running Windows 8.1 Pro.
    HP Envy Phoenix w/Intel core i7-4770 CPU @ 3.40 GHz
    32 GB RAM
    2TB Raid 0 HD
    NVIDIA GeForce GT 640
    Spyder-profiled HP Pavilion 25xi monitors (dual setup)
    Running Adobe Creative Cloud (latest builds--issue present in prior versions, too).
    Using HP Universal Print Driver PS (latest version--only option on Windows 8), but have tried PCL 4 and 5 drivers as well.
    When printing from Adobe products, any photo seems to print without the yellow color. Color swatches and vector files print correctly. This issue seems to only apply to raster images--greens print blue, browns print purple, oranges print magenta. I have had HP support out to examine hardware of printer and everything checks out.
    I have tried every combination of ICC profile, paper setting imaginable. Have tried printing as CMYK and RGB. Have reset preferences in Adobe software. Color issues are present in InDesign, Photoshop, and Illustrator, and the images print consistently off in all products (is purple in INDD is also purple in PSD, etc.). I have reset printer to defaults. I have tried removing color management and printing. I have tried printer diagnostics. I have tried having the printer manage color. I have tried having the application manage color. Everything prints consistently wrong.
    I've updated video drivers, searched for ICC profiles specific to the printer, recalibrated monitors, no dice. Funny thing is that when you take that same file and send it to another printer, it prints accurately.
    Any ideas for troubleshooting are much appreciated. Any solutions would be fantastic.
    Matt

    Yeah, tried printing from PDF and image issues persist. I'm not sure what's going on if everything checks out from hardware standpoint. Appreciate your suggestions though.
    Thumbs up!
    Matt Schroeder
    Chief Creative Monkey
    Big Opposable Thumb
    O: (719) 373-1887
    M: (719) 761-9672
    "Intelligent Design for Evolved Marketing."
    Sent from my mobile device. Please excuse brevity and typos.

  • Hp color LaserJet 3500n printer driver

    I just got a new iMac and have marveled at how EASY everything's been ... so far. Of course, Murphy just couldn't resist and I can't get my oldie but goodie hp color LaserJet 3500n printer to print.
    I clicked + in the Print & Fax System Preferences. It found the printer. Then, the automatic driver selector chose hp color LaserJet 2.0.2. Well, that didn't work.
    I went to the hp site and the driver they have is OLD, but I tried it anyway. No luck.
    Any ideas short of a new printer?

    Try the three-part hpijs driver from here:
    http://www.linuxfoundation.org/en/OpenPrinting/macosx

  • HP Color LaserJet CP1215 Printer drivers location

    Where on my hard drive has the ljcP1215-HB-pnp-win32-en.exe file from the HP Color LaserJet CP1215 Printer support page installed the needed drivers?

    Hi @zenny ,
    I can help you with locating the drivers on the computer.
    Here are the instructions for running the Plug and Play drivers.
    Click the Download only button and save this file.
    Double click on the downloaded file. The self-extracting process will appear.
    Click to accept the terms in the license agreement. Click Next.
    Driver installation begins. Driver files are pre-installed during this process.
    A screen pops up to prompt to connect the USB cable. Insert the USB cable.
    Device is connected, waiting for PnP to finish installing driver.
    Click Finish to complete software installation.
    They extract to the temp folder on the computer.
    Press the Windows key and R at the same time, to show the run command line.Type in %temp%. The folder should start with 7z.....
    Depending which operating system you are using, I would suggest downloading the Full Feature Software and Drivers if you are still having issues with the Plug and Play drivers.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Color LaserJet 2550ln printer displaying error massage

    I was trying to print a page of tickets (6) containing graphics, but my hp color laserjet 2550ln printer printed a page with the following message:
    ERROR: limitcheck
    OFFENDING COMMAND:  showpage
    STACK:
    (r)
    ( Sys / Start ) 
    ( Sys / Start ) 

    Found this on the discussion posted 06-03-2010 01:55 PM   It worked for me.
    I just went through this fix yesterday. I can't remember where I found it on hp.com, though. Here it is:
    Turn printer on.
    On your printer, press the Menu button
    Press 2 (on the fax dial pad)
    Press the right arrow (next to Enter button) until you arrive at "High Speed USB.
    Press Enter
    Press right arrow to select "Off."
    Press Enter.
    Press Enter again.
    Printer will then reboot. I used to get this error occasionally with Windows XP. I wish I would have taken the time to fix this a long time ago!

  • HP Color LaserJet CP2025 Printer - Vertical Yellow Band printing on every page

    For the last several weeks whenever I print from my HP Color LaserJet CP2025 Printer the pages print with a vertical yellow band on the right hand side of each page. I checked the supplies status and it says each ink cartridge has plenty of ink left so I'm at a loss as to what could be causing this yellow band. I'm wondering if it has something to do with the printer's hardware (inside roller perhaps)? 
    Any insight would be most appreciated.

    Hi there cdyson44, Welcome to the Forums!
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital Imaging/ct-p/bsc-412
    I hope this helps!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for