Hp Color LaserJet CP2025n printing a yellow band down the right hand side,

I have a Hp Color LaserJet CP2025n running on a Desk top computer OS win 7 64bit, printer Serial Number [edited Serial Number by Moderator] and another number on the label CB494A, The printer has started printing a yellow band 1.5 cm wide all the way down the right hand side of the page, any ideas or suggestions much appriciated.

@T4011
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Similar Messages

HP Color LaserJet CP2025 Printer - Vertical Yellow Band printing on every page

For the last several weeks whenever I print from my HP Color LaserJet CP2025 Printer the pages print with a vertical yellow band on the right hand side of each page. I checked the supplies status and it says each ink cartridge has plenty of ink left so I'm at a loss as to what could be causing this yellow band. I'm wondering if it has something to do with the printer's hardware (inside roller perhaps)?
Any insight would be most appreciated.

Hi there cdyson44, Welcome to the Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

1099 2010 Forms Print with heavy black line down the right hand side

Greetings,
When we print the 1099 2010 Mscellaneous Income form we have this heavy black line that goes down the right hand side of the margin. We already applied all notes for 2010, including the latest one that had the margin correction published on 1/21/2011.
Anyw

Ours print that way, too. The black line is in the 1099MISC_2010.bmp image that SAP provided in the note. The image is used as the background for the forms.
Regards,
Shannon

I want to print iCal with Mondays in the left hand side column. My calendar prints with Tuesday in the left hand column even though it displays Mondays in the left hand column when in normal use.

I want to print iCal with Mondays in the left hand side column. My calendar prints with Tuesday in the left hand column even though it displays Mondays in the left hand column when in normal use.

Thank you for your advice, it works. I have struggled for hours to find the solution I am very grateful.

Dark band down the right edge of screen ? (17" MBP)

I'm afraid I'm being nitpicky after seeing all those other serious problems, but I'm curious. Let me know if I'm being a nit picker.
On my new 17" MBP (early 2009) with the glossy panel, there is a band of dark area (about 1 inch wide) down the right edge of the screen. It's more noticeable because it then gets brighter 1/4 inch from the edge. It's not that bad... and I doubt that it'd show up in a picture if I were to take one. But it's plainly noticeable when I set the desktop to a solid color.
Is that to be expected? Do you also notice it? I was hoping that uniformity would be better with LED backlighting. Or is this a uniformity issue?

hello,
no i don't think that is being too picky. sounds like a display defect, and it could get worse over time. i think you should take it back.
regards,

Yellow line on the left hand side of my screen iphone 4 after 18 months why has this occured whats the soloution?

I have had my iphone 4 for 18 months on contract..I have had no problems at all up until the begining of this month. The first issue was that the home button, double click issue wasn't working too well. I read that their was a way to calibrate the button which I had done ( please note this does not include opening up the phone) and I noticed that it works much better. However lately I have noticed that I have a yellow tint, line vertical on the left hand side of the screen. It is very faint when I wake my phone but then gets darker and darker.
I have read that people have noticed this on buying their new iphones however mines has just appeared. my contract is up in 6 months so I'm not keen on spending extra on the phone is there anything else I can do?

Try the basics from the manual. Restart, reset, restore.

Laserjet 2600n - has recently produced V-shaped indents along the right hand side of every A4 sheet.

There are two rollers just before the output tray and I think these may be causing the indents, but I can't see any obstructions or foreign objects on them. Can they be forced out of alignment in some way? If so, how can I access them to correct the problem?

There are two rollers just before the output tray and I think these may be causing the indents, but I can't see any obstructions or foreign objects on them. Can they be forced out of alignment in some way? If so, how can I access them to correct the problem?

Black or multi-colored strip an right hand side of copies

My C7280 was not used for two weeks. When I returned home, the printer prints a black or multi-colored line about 1/2 inch wide down the right hand side of the copy. I ran the print dead cleaners three times. Any ideas what is wrokng?

Hi peggymay.
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are having issues with black lines on your scans or copies. I have had this issue myself on my very own 8600 and I was able to get it resolved. The issue actually stemmed from two locations and with any luck we can get this issue resolved for you. First thing to look at is under the scanner lid. Lift the scanner lid and to the left of the large scanner glass, you will see a small strip of glass. Please take a light glass cleaner and a lint free cloth and clean the small glass area as well as the big glass . On the under side of the lid, you will see a white plastic strip. Please clean this as well. IF you have already done these steps then please move on to the next step.
The printer power cable needs to be connected to a wall outlet and NOT a power Bar/Strip. HP printers already have a built in surge protector and if you have it plugged into a Bar/Strip, the printer will NOT get all the power needed to function properly and it will cause issues with scans or copies and it could even generate false error messages on the printer display screen.
Please try these steps and if they work, Fantastic. But if they don't, please feel free to write me back.
Thank you so much for your time. Always happy to help.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Pie chart drop shadows not printing properly.. cuts off right hand side of pie chart...???

Every time I go to print a pie chart that has a drop shadow applied to it, it cuts off the right hand side of the chart along with the shadow itself. It looks HORRIBLE!!! I went through and created a bunch of reports using that method, and now ALL of them have this problem. It makes ZERO sense to me, and it appears that nobody else is experiencing this. Does anybody have any ideas?

It may be a good idea to read :
http://support.apple.com/kb/TA23140
Yvan KOENIG (VALLAURIS, France) mardi 19 juillet 2011 19:10:01
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

FF not printing right hand side of the web page using MAC OSX

FF is not printing out the right hand side of the web page. 1/2 to 1 inch i text is just cut off. Never had a problem in the past with this. Just happened, I believe after I upgraded FF. I am using MacBook Pro OSX.
== This happened ==
Every time Firefox opened
== I believe after I download the new FF update

Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.4; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
I have had problems with Firefox printing pages through most of the Firefox versions. I have tried printing in different ways to no avail.
Among my attempts:
printing to pdf, printing selected text, scaling down the page, using the print mode if the art. offers one. None seem to fix the problem.
Not only does the right margin text get cut off but oftentimes only the first page prints, the rest of the article doesn´t. It just happened again so I went to Safari and the problem disappeared. I believe there´s a serious problem here.
Below see a shot of what the preview of a 12 page article becomes when printed.
http://www.npr.org/templates/transcript/transcript.php?storyId=128222247

4500 envy cuts off right hand side of pdf document when I print to letter size paper

This is a new printer for me. It is connected to my laptop with a USB cord. I am attempting to print an e-mailed PDF document . When I preview, I see that the right-hand side of the document is cut off by more than an inch. How do I get the printer to format the document to fit on letter-sized paper? Reducing the document size to under 100 % does not help.

Thank you for your response! Try the steps below in order, and try printing your email again. Let me know what happens! Reset the printing systemRepair disk permissionsRestart the MacClick here to download and install the printers Full Driver: HP ENVY 4500 e-All-in-One PrinterTry printing your email and also from Text Edit. Good luck!

Trying to print to Color Laserjet CP2025n from OS X Mavericks on a Mac Pro over the network...

Basically, the configuration and drive status all seem OK. But when I try to print something from Adobe Reader, nothing happens after I click print other than the dialog dissappearing. There are no indications of error either. And when I bring up the printer queue, it is completely empty, as if the document was not even sent to it.
I am seeing HP Color Laserjet CP2025n (F4F285) in the Printer selection, as well as in the System Preferences. And from System Preferences, it shows up as "Idle, last used" with a green dot. I have attached full System Diagnostics, Bluetooth Diagnostics (although, I believe this is network'd over the LAN), and the System Report of my Mac Pro. You can see these @
https://drive.google.com/folderview?id=0B2wbE3EVNff3WUNQR2RPTjRmejA&usp=sharing
The other week it printed fine, but it I think I recall seeing two options in the Printer selection box. Now it only shows one, but again, the drivers indicate that everything is alright. I can even view the amount of ink remaining?

Hi @jahburnit
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP Color LaserJet CP2025 Printer series support page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Bad photo prints on HP Color LaserJet CP5225dn Printer

Hey all,
Having an issue outputting photos on my new HP Color LaserJet P5225dn printer from Adobe products. Am curious if anyone else might have run across the same issue and possibly found a solution. Here's the background information...
Running Windows 8.1 Pro.
HP Envy Phoenix w/Intel core i7-4770 CPU @ 3.40 GHz
32 GB RAM
2TB Raid 0 HD
NVIDIA GeForce GT 640
Spyder-profiled HP Pavilion 25xi monitors (dual setup)
Running Adobe Creative Cloud (latest builds--issue present in prior versions, too).
Using HP Universal Print Driver PS (latest version--only option on Windows 8), but have tried PCL 4 and 5 drivers as well.
When printing from Adobe products, any photo seems to print without the yellow color. Color swatches and vector files print correctly. This issue seems to only apply to raster images--greens print blue, browns print purple, oranges print magenta. I have had HP support out to examine hardware of printer and everything checks out.
I have tried every combination of ICC profile, paper setting imaginable. Have tried printing as CMYK and RGB. Have reset preferences in Adobe software. Color issues are present in InDesign, Photoshop, and Illustrator, and the images print consistently off in all products (is purple in INDD is also purple in PSD, etc.). I have reset printer to defaults. I have tried removing color management and printing. I have tried printer diagnostics. I have tried having the printer manage color. I have tried having the application manage color. Everything prints consistently wrong.
I've updated video drivers, searched for ICC profiles specific to the printer, recalibrated monitors, no dice. Funny thing is that when you take that same file and send it to another printer, it prints accurately.
Any ideas for troubleshooting are much appreciated. Any solutions would be fantastic.
Matt

Yeah, tried printing from PDF and image issues persist. I'm not sure what's going on if everything checks out from hardware standpoint. Appreciate your suggestions though.
Thumbs up!
Matt Schroeder
Chief Creative Monkey
Big Opposable Thumb
O: (719) 373-1887
M: (719) 761-9672
"Intelligent Design for Evolved Marketing."
Sent from my mobile device. Please excuse brevity and typos.

HP color laserjet 3500 print blue arrows on right margin

HP color laserjet 3500 print blue arrows on right margin abouti 3 in apart and middle of the page yellow blotches
tried to clean and calibrate nothing changed. dont see any extra blue or yellow toner powerder anywhere.
please help.
does this on test pages and anything eles printed

@dwropp
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

HP Color LaserJet CP2025dn Printer Wired Connectivity and have USB simultaneously?

Hello to all;
Thank you in advance.
I have a HP Color LaserJet CP2025dn Printer.
The question, can I use ethernet connection and have USB simultaneously? Ethernet is faster, right?
Currently, I have the printer connected to network via Ethernet Wired Connectivity through an Apple Aiirport Extreme base station. I have several Mac's all operating under 10.9.1, and two PC's (one is WIN XP, and the other WIN 8.1), which all operate fine with 2008 wired/wireless technology. I know what a dinosour. I am in the process of upgrading the household to current wireless technology with a NetGear AC1900 Nighthawk Smart WiFi Router (Model: R7000), 802.11ac Dual Band Gigabit, with two USB ports ((1) 2.0 and (1) 3.0) . I connected the printer directly into the Netgrar router, and it wouldn't print, ran setup through the Mac and Win computers and still wouldnt pring. One of the reasons that sold me on the Netgear router was the ReadySHARE® USB access—Wirelessly access & share. In order for me to utilize the ReadySHARE® feature is to connect via a USB cable. Sob story, the longest USB cable off the shelf usually 16", and to reach where the printer is now, I need @25-28 feet of cable. Is ther a maximum length of USB that I can use with out suffering loss of speed/functionality?
Again thank you for your time

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
Here is the HP Color LaserJet CP2025 Printer series Support page.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp Color LaserJet CP2025n printing a yellow band down the right hand side,

Similar Messages

Maybe you are looking for