HP Color LaserJet Pro MFP M177fw Not working with Fedora 14

Our ERP is compactible up to Fedora 14. But I newly purchased Printer(
HP Color LaserJet Pro MFP M177fw) is not working with this OS.
Give me a urgent solution

Hi @HealthITLadyRed,
I read your post and see that the printer is making noise and is stuck initializing. I would really like to be able to help you resolve this issue.
I have provided some steps to try to see if we can resolve this issue.
Check and remove any packaging material inside the printer and toner.
Disconnect the USB/Network/FAX and power the printer on Standalone.
Do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
Update the printer's firmware by a USB connection. Software and Drivers.
Select Option 2 and wait for the page to load and then select the link for firmware. This resolved the previous posters issue.
I can send a private message with another step to try.
In the forum beside your handle name just click on the envelope to view it.
How is the printer connected? (USB/Ethernet/Wireless)
What happened prior to this issue? (paper jam, changed toner) Any feedback would be appreciated.
Is this a new printer?
If you appreciate my efforts, please click the Thumbs up button below.
If there is anything else I can help you with, just let me know. Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

HP Color LaserJet Pro MFP M177fw - PostScript support?

Hi,
I'm looking to purchase a new printer/scanner/copier(/fax is a nice to have, but not mandatory), and I'm deciding between the following models:
HP LaserJet Pro 100 color MFP M175nw
HP Color LaserJet Pro MFP M177fw
PostScript support is important for me, and I know that the 175 has this. However, I'm not sure about the 177, even after digging through several web pages and documents. Here's what I found:
- The main specs page for the 177 says that it supports "PCLm". I'm not familiar with this PCL variant, so I don't know how it compares to PCL5 or PCL6, etc. I was unable to find more information on "PCLm".
- The "Software Included" section of Page 2 of the PDF datasheet for the 177 mentions "HP PostScript" driver. This is the only place where I've seen any potential indication that the 177 supports PostScript. This section also mentions a "PCLmS" driver. I could not find any further information on "PCLmS".
- The for User Guide the 177 only mentions PostScript in a section that refers to ePrint. However, it does not imply that the 177 itself supports PostScript.
- The Product Specifications page (in the Support section of the HP site) for the 177 has a "Printing Specifications" section which lists only "PCL3 GUI" next to "Device languages".
I'm guessing that the 177 does not support PostScript, but does anyone have any more definitive information? Also, is there a description of PCLm / PCLmS somewhere?
Thanks!
This question was solved.
View Solution.

Hi Clent
Here is some information on both printers.
Here is a url for the printer specifications for the Color LaserJet Pro MFP M177fw
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03901180&tmp_task=prodinfoCategory&cc=us&dlc=en...
Data Sheet also.
http://www.shopping.hp.com/shopping/pdf/cz165a.pdf
Fonts and typefaces Depend on Operating System fonts and typefaces.
Print languages
PCLm
Laserjet Pro 100 color MFP M175nw
http://www.shopping.hp.com/shopping/pdf/ce866a.pdf
Print languages
HP PCL 6, HP PCL 5c, HP postscript level 3 emulation, PDF (v1.7), HP PCL 6, HP PCL 5c, HP postscript level 3 emulation, PDF (v1.7), AirPrint™ compatible
Hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp color laserjet pro mfp m177fw (Cant open SCANNER on computer)

Hi there,
I am using a desktop 27 inch Mac with OS X Yosemite 10.10.1
When I go to system preferences and click on printers/scanners I can see my mfp m177fw laserjet printer (wirelessly connected fine). But unlike on my Macbook Pro laptop on my desktop there is no SCANNER option to open up? Thus I am unable to scan from the printer to this desktop. I have the latest HP driver installed on the desktop computer for my m177fw printer.
Any ideas? Any help would be greatly appreciated
thanks!
Simon

Hello @Simonjayh,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the scan issue that you're experiencing since installing your HP Color LaserJet Pro MFP M177fw on your Mac OS X 10.10 computer. Can I please have you run through the steps below to get this product functioning properly again for you.
Step 1: Uninstall Drivers:
First, can I please have you click here and run through the steps provided to Reset the Print System on your Mac OS X 10.10 computer. Please refer to the section under 'Resetting the printing system in OS X Lion' as the steps are the same for your Mac OS X 10.10 Operating System. Resetting the Print System will remove every printer from your Print & Scan window on your computer. However, this does not uninstall the devices. Therefore, should you use other printers on your Mac OS X 10.10 computer simply ensure that they are plugged in with a USB Cable or Network connected and add (+) them back in. Do not add your HP Laserjet printer back in at this time.
Next, please click here to access the steps on how to properly uninstall the Software and Driver Package for your printer. Once the website opens select the dropdown for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9' as the steps are the same for your Mac OS X 10.10 Operating System. Once the uninstall has completed successfully, please proceed to the next step.
Step 2: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 3: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 4: Reinstall your Software and Drivers:
Lastly, please click here to download the appropriate Mac OS X 10.10 Full Feature Software and Driver package for you printer. Once the website opens select the Download button on the top left. Once the Download is complete please follow the onscreen steps to reinstall you printer.
Once your printer has been successfully reinstalled, please test the HP Scan functions again. For additional scan information, you may want to refer to : Scanning with the Full Feature HP Software in OS X v10.10 Yosemite
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP Color LaserJet Pro MFP M177fw don't go to sleep mode

Hi and sorry for my english In settings of HP Color LaserJet Pro MFP M177fw I tryed 15 and 5 minutes before sleep mode. After 15 or 5 minutes printer going to sleep, but if I'm used printer even only one time, after that he don't sleep ( printer's screen not dim), not after 5 and 15 minutes. Printer is connected through wi-fi, Windows 8.1 x64. Any ideas?)

Hi Denis88,
I see by your post that the printer isn't going into sleep mode.
I can help you with this issue.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
I would update the printer's firmware if the printer won't go into sleep mode.
HP Color LaserJet Pro MFP M177fw Drivers.
Select your operating system, click next, click the link for firmware.
I have provided some information from the manual for the sleep mode that you can check out.
COLOR LASERJET PRO MFP.
EcoSMART Console: Change the default times for entering Sleep mode or Auto Power
Down mode. Configure which events cause the product to wake.
Printer Settings Auto-off Configure the product to automatically turn off after a period of
inactivity. You can adjust the number of minutes after which the product turns off.
Touchscreen control panel:
1. From the Home screen on the product control panel, touch the Setup button.
2. Open the following menus:
System Setup
Energy Settings
Sleep/Auto Off After
3. Select the time for the Sleep/Auto Off delay.
NOTE: The default value is 15 Minutes.
4. The product automatically wakes when it receives jobs or when you touch the screen on the product
control panel.
You can change which events cause the product to wake. Open the following menus:
System Setup
Energy Settings
Wake/Auto On Events
To turn off a wake event, select the event, and then select the No option.
Hope this helps resolve your issue.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Color LaserJet Pro MFP M177fw Scanning

I bought and jsut setup an HP Color LaserJet Pro MFP M177fw.
We are a Mac household, and we connect via wireless to the printer, which works great.
My issue is scanning. On the little screen on the printer, I can copy, print and even fax. No option for scanning. There is some bullsh*t app that I've had to download via HP called Readiris, which is useless. There is no apparent way to initiate a scan via this app.
So I've bought a multifunction printer that doesn't scan. Any help?

It doesn't scan?!
Below is the text from the first page of the first link one clicks on about this printer. How _on earth_ is one supposed to deduce pre-purchase that it doesn't scan from the main menu? Argh. As an HP employee myself, this is aggravating in the extreme.
Ok, venting aside, this link <http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03967506#N229> is not offering a solution.
I am running OSX 10.9.1. I am unable to find the Full Driver to donwload in order to connect to this printer in a manner that would enable any of the 3 methods of scanning (Via Preview, Image Capture, etc.) to work. Can you please provide a link to the Full Driver for this MFP M177fw for Mac OSX 10.9? Thanks.
*** Start copied text from online website on HP printer ***
This affordable HP Color LaserJet Pro MFP brings vibrant color printing
in-house, and boosts productivity with Ethernet connectivity. Enable easy
printing at work, home, or on the go with mobile printing features.1
Print speed:4
Black: Up to 17 ppm; Color: Up to 4 ppm
Scan resolution: Up to 1200 x 1200 dpi (hardware); Up to 1200 x 1200 dpi
(optical)
Copy resolution: Black (text): Up to 300 x 300 dpi; Black (graphics): Up to
400 x 600 dpi; Color (text and graphics): Up to 300 x 300 dpi
Display: 3.0" LCD (color graphics)
Standard connectivity: Hi-Speed USB 2.0 port; built-in Fast Ethernet
10/100Base-TX network port; Wireless 802.11b/g/n
Duty cycle:5
Up to 20,000 pages

HP Color LaserJet Pro MFP M177fw screen frozen on hp logo and energy star icon

My HP Color LaserJet Pro MFP M177fw screen is frozen on hp logo and energy star icon. It has only printed the test page, and will not print otherwise. I have tried unplugging for 60 seconds, and even uninstalled it and reinstalled it with the latest download - still no change. None of the other icons outside the screen work either (home, help, etc.) about all i can do is turn it off and on. Also, I obviously cannot make copies etc since I cannot access any of the functions. Please help! and thanks in advance!

Hi , I read your post and see that the printer is frozen on the HP Logo and Energy Star Icon. I would really like to be able to help you resolve this issue.
I have provided some steps to try to see if we can resolve this issue. Disconnect the USB/Network/FAX and power the printer on Standalone. Check and remove any packaging material inside the printer and toner. Do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation. If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord. Update the printer's firmware, make sure you run this through a USB connection. It may not detect the printer in this error state though. Software and Drivers. Select Option 2 and wait for the page to load and then select the link for firmware. I can send a private message with some another step to try.
In the forum beside your handle name just click on the envelope to view it. How is the printer connected? (USB/Ethernet/Wireless) Please let me know the outcome. Have a nice day!
Thank You.

HP Color LaserJet Pro MFP M177fw cannot scan or copy

My HP Color LaserJet Pro MFP M177fw cannot scan or copy. Screen on the printer just show calibrating only
Bsically an't scan or copy, the printer is just showing a message on the display of "calibrating".
Thank you for help

Hi @Ern88 , I can help you with not being able to scan or copy. The printer is showing that it is stuck calibrating.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Try to make a copy again.
Please check your private messages for additional steps to try.
In the forum beside your handle name just click on the envelope to view it.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Mac cannot detect scanner option on HP Color LaserJet Pro MFP M177fw after trying every method

Hello,
I have recently purchased the new printer HP Color LaserJet Pro MFP M177fw and I am having a lot of trouble trying to scan. I have spend hours trying to fix this.
I have tried all the methods on this website, (trying through preview, printers and scanners (no scanner option showing) image capture, etc. I have also installed all the necessary drivers with no luck (CD and from HP website)
Then I tried all the other methods that were listed, I have tried restarting, deleting drivers and proceeding through image capture, preview and sanner and printers, it just does not have scan option anywhere.
The printer is working fine though, and I am connected to the printer through wifi
I do not know what else to try, please help.
Kinds regards
Zhanna

Hi @student ,
I see by your post that you aren't able to scan through the wireless network. I would really like to be able to help you resolve this issue.
When you added the printer, did you add it as a Bonjour printer or did you have to type in the IP address and add it through IP Protocal? The reason I am asking is because when adding the printer through IP Protocal you can only print, your not able to scan with the printer added this way.
Check the driver name that is installed for the printer. It should list just the printer's name. (HP Color LaserJet Pro MFP M177fw )
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen should show the name.
If the printer name isn't listed properly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver. (you might have to click the drop down to select the printer's name to add it in)
If you are still having issues, uninstall the printer software.
Uninstalling the Printer Software.
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer.
Empty the trash.
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Then install the printer software again. HP Color LaserJet Pro MFP M176/M177 Series Software.
If the issue persists, connect the printer directly to the Mac and try and scan through a USB connection. Just to rule out a network issue.
Please let me know the outcome.
Have a fantastic day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Color laserjet pro MFP M177fw loses IP address

New Color Laserjet Pro MFP M177fw keeps losing the IP address so my computer won't print via wireless. What to do?

Hi markfanderson12,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand the printer keeps losing the IP address.
I will be happy to help you.
When the printer is installed on a network, (wired or wireless) the router assigns it an IP address.
However this IP address can change for various reasons. Most of the time the printer software will often adapt to the new IP address and printing functions will carry on as normal but the scanner software will not.
I would setup a static IP address for the printer once it is back on the network again to resolve this issue.
Printer Does Not Maintain Wireless Connection. Go to Solution three: Assign the printer a static IP address.
At the bottom, select Additional information for Tips for troubleshooting a wireless connection.
Hope this helps.
Thank you for posting on the HP Forums.
Have a nice day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Trouble initializing color laserjet Pro MFP M177fw wireless connection

color laserjet Pro MFP M177fw - Printer was working for several months, now it will not print and when you power cycle it just shows initializing... but never finishes. Using wireless network connection to a Windows 7 pc.

Hello,
I have provided the URL for doing a firmware update on the printer, but do it through a USB connection. Since the printer is in a error state though, it might not detect the printer to do the update. HP Color LaserJet Pro MFP M177fw.
Select your operating system, click Submit, click the link for firmware and then click on the Download button.
I have provided some steps to try to see if we can resolve this issue.
Disconnect the USB/Network/FAX and power the printer on Standalone.
Check and remove any packaging material inside the printer and toner.
Do a hard reset to see if that will resolve the issue, if you haven't already.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
I can send a private message with some another step to try.
In the forum beside your handle name just click on the envelope to view it.
How is the printer connected? (USB/Ethernet/Wireless)
What operating system are you using?
Please let me know the outcome.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Un able to install Scan to Email app on Color LaserJet Pro MFP M177fw

Hello!
I recently purchased Color LaserJet Pro MFP M177fw as my home printer.
Main thing i was looking for was Scan to Email feature.
As I read in specifications provided in this product description I see:
http://www.shopping.hp.com/shopping/pdf/cz165a.pdf
Digital sending standard features: Scan to E-mail by HP SW; scan to application by HP SW ; scan to file by HP SW
Once I try to install Scan to Email app i get following message once i try to install app:
What is wrong, that i cannot install app that was one of main choice points of this printer.
TWAIN and using computer scanning process is clear, so no need instructions how to scan using computer.
I especially need fucntion that i scan document on printer, then enter email and its emailed.
Thank You in advance for clarification,
Martins

Hi MrJansons,
There are a numerous ways to scan and email from your printer. Please go through the below links.
Make sure you have installed the software driver for your printer on your machine and then follow any of the methods to scan and email.
http://support.hp.com/us-en/document/c03476857
Kind Regards,
Oliver
"Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.

HP Color LaserJet Pro MFP M177fw How to Scan

I just bout the HP Color LaserJet Pro MFP M177fw printer today and don't know how to use the scanner. I use Windows 8 operating system. Please advise how to use th scanner function. Thanks.

Hi, From page #38 of the manual: Scan by using the HP Scan software (Windows)
Use the HP Scan software to initiate scanning from software on your computer. You can save the scanned image as a file or send it to another software application.
1. Load the document on the scanner glass according to the indicators on the product.
NOTE: For best results, load small-size paper (Letter, A4, or smaller) with the long edge of the paper along the left side of the scanner glass.
2. Click Start, and then click Programs (or All Programs in Windows XP).
3. Click HP, and then select your product.
4. Click HP Scan, select a scanning shortcut, and then adjust the settings if necessary.
5. Click Scan.
NOTE: Click Advanced Settings to gain access to more options.
Click Create New Shortcut to create a customized set of settings and save it in the list of shortcuts. Regards.

HP Color Laserjet PRO MFP M177FW Cannot connect to web services

I bought a HP Color Laserjet PRO MFP M177FW today and I set up it. It can print and scan over wireless network. However, It cannot connect to web services correctly. I set the DNS numbers with google DNS addresses. I changed its IP address with manually. The IP address is unique. Normally It doesn't enable/remove webservices. But when I restart it, it can do for few minutes. It can take an e-mail address but It doesn't print any information sheet. When I try to print a sheet It says "Connection Problem" at first few minutes and later it says "Connecting"and it waits, there is no error message. What am I suppossed to do? Please help me.
This question was solved.
View Solution.

Hello rasitbolukcu,
Welcome to the HP Support forums. I understand that you are having difficulties enabling the web services for your Laserjet Pro MFP M177fw printer.
I appreciate all the information you gave me, it makes it much easier to assist you with the troubleshooting. I have included the Getting the Latest Firmware and Product Updates document. It will walk you through ensuring the printer has the latest firmware. Once you have updated the printer, please try to enable the web services again.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Can't install Color Laserjet Pro MFP M177fw

I'm having trouble installing the drivers for my new Color Laserjet Pro MFP M177fw AIO printer. I'm using a Sony Vaio VPCX118LG running Windows 7. I initially successfully installed the software from the disk provided some weeks ago, and had the printer running satisfactorily. About 3 weeks ago, I attempted unsuccessfully to install Office 2013 on the 32 system, and finally gave up trying and went back to Office 2010. Since about that time, I've been unable to use either of my M177s (I have two printers in my two offices in different cities; the one in Sydnay is working fine with my HP Pavilion desktop up there, but now won't work with my laptop, as won't the other identical printer in Canberra). I've tried uninstalling the software (using the Uninstall utility on the disk provided with the printer) and reinstalling. The install process seems to be proceeding normally but at about 99% complete stops with a message about a "Fatal Error". When monitoring the process using the Windows dialogue, the failure appears to coincide withthe installation of the last driver (after the Scan, Fax, USB Printer, etc...the one called, "HP Color Laserjet Pro MFP m177fw"). I've tried downloading the installation files and drivers from the HP website and installing from the disk provided, but neither method works. Can someone there offer any help, please? Claude

Hi , I think it's time to take the proverbial gloves off. I suggest you try a selective start up on your PC working directly with MSCONFIG to try and determine what, if any Windows service or program is interfering with your ability to install the drivers. Here's how: Click on the Start menuIn the 'search programs and files' box right above Start, type msconfig and hit enter on your keyboardWhen the System Configuration Window opens click 'Selective Startup' and uncheck Load Startup ItemsClick the Services tab. Check the box at the bottom for Hide All Microsoft ServicesSelect Disable AllSelect Apply and OKRestart your computer when promptedAfter you reboot, try the install again. If you're able to finish the setup we can safely assume there is a background program or service on your computer blocking the install. You will need to enable one service at a time on your computer to locate the program that's blocking your printer from printing. Here's how to undo the above-noted MSCONFIG steps: Click the Start icon.In the 'search programs and files' box right above Start, type msconfig and hit enter on your keyboardWhen the System Configuration Window opens click 'Normal Startup'Click Apply and OKRestart your computer as prompted. If this approach falls short I recommend you reach out to our tech support team. You can click on the following link to initiate a case: www.hp.com/contacthp/
Once you fill out the online form to create your case you can choose from different direct contact methods. Best of luck,

How to scan on Mac OS10.10.2 by HP Color LaserJet Pro MFP M177fw?

hello,
i try few different way but still don't know how to scan things.
anyone know how to scan on Mac OS10.10.2 by HP Color LaserJet Pro MFP M177fw?
it have no problem on printing by wifi.
thanks,
Les

Hi Les,
Follow these steps to scan with the HP Scan software:
http://support.hp.com/us-en/product/HP-Color-LaserJet-Pro-M170-Multifunction-Printer-series/5303438/...
If you do not have the HP Scan Software located as the socument states, download and install the following software.
Be sure to seect HP Scan while installing the software:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-124923-3&cc=us&dlc=en&lc=en...
Additionally you may scan with Apple's software by following these steps instead:
http://support.hp.com/us-en/product/HP-Color-LaserJet-Pro-M170-Multifunction-Printer-series/5303438/...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Color LaserJet Pro MFP M177fw Not working with Fedora 14

Similar Messages

Maybe you are looking for