Hp compatibility

Hello
My IT guys are saying that my 20" cinema display isn't compatible with the HP6510b that they have bought me, even though it has the right connector. Is this true? Is there anything we need to consider to get it to work please?
Thanks,
Adam

Try WinACD
<http://sourceforge.net/projects/winacd>

Similar Messages

I have formatted my SSD and hard drive.... I am running a clean install from disk of 8.1 pro. I cannot determine if it is a compatibility

issue or hardware issue. I had run a memory test and scan disk for bad sectors from the bios. As administrator, I enabled automount in diskpart to allow windows to assign a drive name.
From the bios, I can see both drives and only the ssd. I have not pinpointed when the harddisk is unmounted. It is formatted as NTFS. I can hear it unmount either during boot or upon waking from sleep mode. The bios sees no bad sectors nor does windows.
However, when I had the intel compatibility software installed, my hard drive never mounted. I did a restart and inorder for windows to see my hard drive. I disabled the intel software for the 4th gen i7 processor. This problem is happening less often. I do
not think I have solved the problem. Intel or Windows... I think a bit of both.
If there is a software patch, please guide me to it. I am in school and use my laptop ALL the time. I believe it is a compatibility issue. I have attached this from searching intel's site for downloads and windows is up to date.
I am quite concerned because I can hear my harddrive unmount. It is labeled as healthy NTFS partition. I have checked for hidden volumes and done everything I know to do to check the integrity of the hardware as administrator. I have searched microsofts
libraries and forums and have done everything I can find as suggestions.
I have checked for malware, viruses, etc. My only clue this is going to happen is the hard disk spins up and I hear the fan, then I hear it unmount the drive. Of course, after unmounted there are other issues which I have ruled out as the cause of the problem.
Basically, I am experiencing a lack of swap space after my hard drive unmounts.
Any suggestions, are welcome! I would really like to know if this is a known windows issue. I should not have to disable intel's processor software. I paid for the features of the i7 and would like to utilise the processor.

Hi,
According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
Roger Lu
TechNet Community Support

Itunes wont open - compatibility error...

hi,
today I had a problem with moving songs from itunes to ipod. have had this issue in the past which was fixed by using ipod updater.
this didnt seem to work so for first time in ages ran the itunes updater. I can no longer open itunes and get the following error.
Quicktime unavailable
itunes requires Windows 2000 or later
Please make sure compatibility mode is disbaled in the compatibility tab of the properties of itunes.exe
well....I tried to do this (I am not massively IT literate!), have tried selecting or deselecting compatibility on this tab....and still wont open....any ideas?
im on windows XP professional.
cheers in advance
mike

hiya!
if I find the mp3 file on my hardrive and move it to ipod manually it still doesnt appear when I disconnect.
that's normal. for the ipod to recognise a song it needs to be transferred to the ipod via itunes rather than dragged and dropped with Windows Explorer. see the note at the end of this article:
iPod: Operating System or iTunes Reports the Disk is Full, But It Does Not Look Full
... try resetting the warnings on your ipod and trying another manual sync:
Resetting iPod warnings
do you get an error message show up after resetting warnings?
love, b

Is there a Data Execution Prevention compatable version of iTunes? I have reinstalled iTunes 10.5 at least 10 times, and after it installs, it will not open because of DEP.

I have tried all the advice I have seen on Apple Support discussion boards for the past 2 days, and nothing works. Disabling DEP is not possible, regardless of what the Windows Support discussions tell you. In the meantime, I have absolutely no access to iTunes, or even the ability to update my iPhone or iPod. The only feasable solution is the possibility of a version of iTunes that is compatable with Data Execution Prevention settings.
In the past 2 days, I have: Removed iTunes and related components from the Control Panel (numerous times) Per the instructions on Apple Service discussions pages, I did it in this order. 1. iTunes 2. QuickTime 3. Apple Software Update 4. Apple Mobile Device Support 5. Bonjour ^. Apple Application Support. After all that, I reinstalled iTunes.
Everything looks fine during installation, with no error messages. At the end, it says everything was successfully installed. However, when the installation tool closes, iTunes will only partially open a window, but will stay blank. Then I get the message that iTunes has stopped working and that Windows has shut it down. Then I get notified that DEP has caused iTunes to shut down.
Can someone please help? Or, is there a DEP compatible version of iTunes?
I would appreciate any help. Thanks!!

Polydorus,
Thank you for your kind reply. During the many times I uninstalled iTunes, and all the other Apple programs, I only used the Uninstall Programs in Windows Control Panel. To make a long story short, I found a solution that works for me, but it is still not a complete soluton.
Here is what I did:
I used Uninstall Program in the Windows Control Panel to uninstall everything IN THIS ORDER
1. iTunes
2. QuickTime
3. Apple Software Update
4. Apple Mobile Device Support
5. Bonjour
6. Apple Application Support
Then I went to C:\Program Files and looked for any iTunes or Apple program listed there and deleted it.
I have 64-bit, so I then went to C:\Program files (x86) and looked for any iTunes, QuickTime, Bonjour or any other file or folder that had Apple or any Apple program in the name and deleted it.
I went to C:\Windows|SysWOW64\Quicktime and C:\Windows\SysWOW64\QuicktimeVR and deleted them
Go back to START, and open the "C" drive. Open the USERS folder. Open the folder with your username. Open the AppData folder. Then double-click on the LOCAL folder to open it. If you see any files or folders there that show any Apple program or file, delete those files or folders. Then go to the REMOTE folder and do the same. If there are any other users on this computer, go to each individual user and do the same thing in each LOCAL and REMOTE folder. Restart your computer.
Go to http://www.apple.com/itunes/download/ This is the page where you will actually download iTunes. Scroll down the page to the section under "Windows Software" that says "64-bit editions of Windows Vista or Windows 7 require the iTunes 64-bit installer". Click on that line to get the installer. It will take you to another download window.
Scroll to the bottom of the page to the message that says "Download for iTunes 10.4.1 for Windows (64-bit) here: iTunes for Windows 64-bit." Click there to get the download.
This is not iTunes 10.5, so you will not have access to "The Cloud", but it is at least functional until Apple actually comes out with a version that will not activate the DEP message. There was no combination of uninstalling and reinstalling, with or without Quicktime, with 10.5 that did not cause problems with Data Execution Prevention problems that I found.
I also used Firefox for the downloading instead of Internet Explorer. It just seemed to function better that way.
I hope this is helpful to someone. It's just what worked for me.

How to set Compatibility Mode for a single site in ie10

This question was originally posted on the Answers forum -
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/how-to-set-compatibility-mode-for-a-single-site-in/187152e3-142a-4d96-8d1b-af82ef571eec
I am having problem with getting ie10 to set ie9 compatibility for a single site (sharepoint.contoso.com).
When I add this website in Compatibility View Settings (Alt > Tools > Compatibility View Settings > 'Add this Website') it adds the domain 'contoso.com' and not the individual website (sharepoint.contoso.com).
This cause other sites (www.contoso.com) to be configured to use compatibility mode. Because this is a separate site (different web server) to the site sharepoint.contoso.com (sharepoint 2010 server) we need different compatibility settings.
Using a different example to explain the issue -
Microsoft has three websites that are different websites created by different developers written in different programming languages and they only work with certain browsers.
microsoft.com (Website1 created by Developer1) - compatible with ie8/ie9/ie10
msdn.microsoft.com (Website2 created by Developer2) - compatible with ie8/ie9
technet.microsoft.com (Website3 website created by Developer3) - compatible only with ie10
The only thing the three website share is the URL contains 'microsoft.com'.
Marking 'msdn.microsoft.com' to run in compatibility mode affects the other 2 websites - mainly technet.microsoft.com which will not work now since it only runs in pure ie10 mode.
Should you be able to add an individual site to the compatibility list instead of all sites that have .microsoft.com in the URL? Am I missing a simple setting in the ie10?
As a workaround I am using the F12 Developer Tools to set the Browser Mode which temporary sets the compatibility mode. However this is not a nice solution to the end users at our organisation.

problem is not solved for non corporate environments...
You could start your own thread. Then if you got that answer and it was marked Answered you would have the ability to unmark it. The OP of this one seems satisfied. Also note that this is TechNet. Consumers can get help on Answers
forums.
Robert Aldwinckle
Oh! I wrote it wrong: I should have said: This is not solved for NON-AD environments. No demands what so ever to use Window 7/8 professional in a small corporation or on a big corporation with Island of smaller departments for example offshore.
The problem is that the thread is not "Answered" by the OP, its is marked answered by a moderator (and same moderator that did the answer) so no way of telling if the OP is satisfied.
But you are right in the fact that I am almost kidnapping the thread. But a complete answer would benefit all in this case I would presume.
Regards
/Aldus

How can I turn on the Compatibility View Option?

In viewing a vendor's online reporting, I noticed that the report's header appears on the right, while the report's content appear on the left, creating a confusing viewing.
The vendor has recommended that I turn on the Compatibility View Option, but I cannot find this option anywhere.
Would someone direct me to the section where I can turn on the Compatibility View Option?
Thank you!

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I am trying to find "compatibility view settings" in order to add a website that I need to use for work. PLEASE HELP!

I received a "how to" sheet of how to be able to view this website but it wants me to download Internet Explorer (excuse me while i say yuck!)...
So the directions state: Under "Tools" click on "compatibility view settings". Where is says "add this website" write in the website and then click add and close. Log off and reboot.
I live on Mozilla on all my devices. I recommend it to anyone who has not been introduced yet. I cringe to think of being forced to use internet explorer!!!
Thank you for all you do!!!

hello ETRU, "compatibility view" is a concept of internet explorer that other browsers do not have. do you have any particular problem viewing it with firefox?

Iphone and windows 8 compatibility?

When is apple going to fix the iphone and windows 8 compatibility? All I get is the "waiting for changes to be applied" message. I can't sync my phone.

I have no issues with Win 8 working fine with the latest (win 8 compatible )
iTunes

Itunes and windows 8 compatability Hi just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies. ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows 7

itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam

itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam

I have PhotoDhop Elements 4.0, which I have been running on an XP computer. I bought a Windows 8.1 computer, and tried to reinstall it on the new machine. It would not install, due to "compatibility" problems. Is there a fix that will let me install this

I am trying to determine whether there is a way to install my PhotoShop Elements 4.0 on a Windows 8.1 computer.

If there is it probably requires doing so in compatibility mode. Try searching Google to see if anyone has looked into this for Windows 8 or even an earlier version since it likely a question for earlier Windows versions as well.

CVP 7.0.2 compatibility with ICM 8.5 or 9.0

Is there any official documentation on the compatibility of CVP 7.0.2 with newer versions of ICM?
I am interested in knowing, if anyone ever successfully connected a CVP 7.0.2 Call server with ICM PG 8.5 or 9.0.

This is definitely not supported. I believe there will be issues with the communication between PIM and CVP.
Take a look at the below pages.
http://docwiki.cisco.com/wiki/Unified_CCE_Software_Compatibility_Matrix_for_8.5(x)
http://docwiki.cisco.com/wiki/Unified_CCE_Software_Compatibility_Matrix_for_9.0(x)
However ICM 7.5.10 does support CVP 8.x very well.
-Sunil

Facebook video chat compatibility in window 8.1

Please note that I can't able to find facebook video chat icon in window 8.1 operating system. Same has been available in window 7 and lover version. Please note that I was use same logging and I found this mismatch. Request you to please provide solution
for use facebook video chat in window 8.1.
Thanks,
Ankur Patel

You are not getting facebook video chat icon as it's not compatible.
Ref:
http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Name=Facebook%20Video%20Calling&vendor=Facebook&ModelOrVersion=1&Type=Software&tempOsid=Windows+8.1
To resolve this issueYou may refer to the article to add check in compatibility view settings.
Fix site display problems with Compatibility View
S.Sengupta, Windows Entertainment and Connected Home MVP

Windows 8 and itunes 11 compatibility with an ipod

I have itunes11 and Windows 8. I've called Apple and I've talked to Microsoft. This was months ago. I can download itunes and run it from my laptop but am unable to sync my ipod. I get an error and it automatically reboots my computer. I was told there were known compatibility with itunes and Windows 8. This was months ago.
I know how to downgrade itunes to XP or Win 7. This is not the issue. I can download to my laptop and place, it will not sync to my ipod device (which is a fear years old), but when I did talk to support I was told that it was supported. The ipod was not the issue.. It was the incompatibility between the programs.
I see recent updates in the support community in the past month about production resolution but this still has not resolved my issue. I don't believe purchasing a new ipod is going to resolve the issue either.
If anyone has successfully developed a workaround or recently downloaded itunes11 w/ Windows 8 and can sync to an apple ipod I would love to know how you did it.
Kia
[email protected]

Im not sure that will solve the issue I have with itunes. I have a lenovo laptop and I think it's just an issue with Apple who has to modify the program for users of Windows 8 so that itunes can be used and to find purchased music. I found the music I purchased through itunes but it's not the full tracks. It said it allows me to download it fully so I can hear the whole track, but needs some kind of capatibility? I have no idea what the problem is. If someone has the answer knowing my computer brand and having windows 8 compatibility issues, please let me know what you suggest.

Checking for PDF 1.7 compatibility in Preflight (Acrobat 9 Pro)

Hi,
I've noticed that in the given Preflight profiles in Acrobat 9 there is no compatibility check for PDF 1.7, only 1.6. is there a profile i can load? or a set of checks i can make a profile in order to determine 1.7 compatibility?
Thanks,
Yair Agmon.

Hi,
Knowing a PDF file's version premits deduction of what version "compatibility" is present.
Version 1.7 (Acrobat 8.x) lacks compatibility for Acrobat 9.x specific features.
Version 1.6 (Acrobat 7.x) lacks compatibility for Acrobat 8.x specific features.
And so forth.
Certainly, not an elegantly simple approach; but, nevertheless it is functional.
Using Acrobat Professional/Extended 9.x -
Open the Preflight dialog.
Advanced > Preflight
From the Options drop-down menu, Select "New Preflight Profile".
The Prefight: Edit Profile dialog opens.
A default profile name is provided (New Profile <number>).
Initially, Click the Save button to save the profile. You can rename it later.
Note that "New Profile" is placed in "Custom
Now, locate your "New Profile" in the column at the left of the dialog and select
"Custom checks".
The available custom checks list loads in the pane to the right.
Above and to the right is a "Find" field.
Enter the string "version".
A filtered list appears.
A custom check is available for "versions newer than":
1.2 | 1.3 | 1.4 | 1.5 | 1.6 | 1.7
and there is a custom check for "version older than 1.3".
Add the desired custom check to the profile. Save.
Configure the check for Error | Warning | Info
Info is "Notification" in the report that can be provided.
Once you have configured "New Profile" it can be used by a Batch Sequence to check multiple files.
When a Preflight is selected for use by a Batch Sequence you can configure for a "on success" and/or "on error" report.
Be well...

Adobe Bridge CC to Adobe Dreamweaver CC compatibility issues

I've just got off the phone to Adobe help desk following an investigation which took a number of days to resolve.
The problem was this -
I'm studying for a Dreamweaver ACE exam on Monday (wish me luck!) and I'm using Adobe Dreamweaver CC "Classroom in a book" to help me prepare.
One of the tasks is to access Adobe Bridge CC, select a JPEG image, and then click File > Place > Dreamweaver to transfer the image from Bridge to where you want to place the image in Dreamweaver. Wouldn't be a problem except on Bridge you can no longer follow the commands File > Place > Dreamweaver, because on the latest versions of Bridge, (as I was eventually told by Adobe helpdesk after their investigation) the option to place a file or image onto Dreamweaver (and now Photoshop) no longer exisits.
this was confirmed when the gentleman at Helpdesk tried installing the latest versions of Bridge/Dreamweaver/Photoshop onto his computer and encountered the same issue.
I'm wondering whether Adobe are now phasing out Bridge as it is now becoming less compatible with Dreamweaver (and now Photoshop) and if so, what it is being replaced with?
I'm also hoping that im not going to get an outdated question on my ACE exam re compatibility between Dreamweaver and Bridge, but thats a whole different issue...
Cheers guys, all the best, and happy new year!
Jon
Message was edited by: jonathan kidd

Is this something that has changed from CS6 to CC?
No, you either are trying to copy from a disk that does not allow you to copy or you don't have the correct admin permission for read write in Finder.
Check the folder or disk with cmd + i (get info) and at the bottom check if you have the correct read and write permissions
But the easiest way to copy to a folder on your system is opening the folder panel in Bridge with the wanted destination folder in view and drag and drop (with option pressed for copy if you are on the same disk) the file from the content panel to that folder.

Photoshop CC compatibility macbook pro 10.6.8

Hello
I have a macbook pro mid 2010 (originally 10.6.8 - now mavericks) which means that I only have 256 of VRAM on my NVIDIA graphic card and 288 on the built in Intel graphic card. I can see on the requirements page (Systemkrav | Photoshop) that Photoshop CC requires at least 512 MB VRAM.
Does this mean that it is useless for me to have Photoshop CC with my graphic card? Or will it work fine with normal image retouching and does this bad compatibility only have a say with 3D images? When I first opened photoshop CC it promted me with something like - the OpenGL has been disabled.. and something about 3D images.
(OR does the 2 graphic cards together make up my available VRAM? that is 256+288 = 544 VRAM? Forgive me if this is a silly question.. I don't know much about grpahic cards!)
Hope someone with more computer skills than me can answer my question

You can use Photoshop CC on that system, but you won't have access to the 3D tools, or all the advanced GPU features.
No, VRAM is not additive across multiple cards.

Hp compatibility

Similar Messages

Maybe you are looking for