HP D5640 printer prints green instead of black, but only when printing onto printable discs

Hi there,  im wondering/hoping that someone can help me solve this,  basically my printer works fine when im printing on paper, but when i put a disc in and try to print anything with black in, the black comes out as a bottle green colour, this has happened a few times before and i usually uninstal all the printer software off my pc, then reinstal it  and it prints fine, this time however doing that hasnt worked, ive tried all weekend and unistaled it loads of times and its driving me potty, ink cartridges are all fairly new so running low on ink aint the issue.
If anyone can help or advise me on this id be really grateful, oh ive also tried changing the rgb to adobe  too and didnt make any difference.
thanks
wendy.

Hi there,
thanks for the message,  im using hp photosmart essential 3.5 to print to the disc, my operating system is  Windows  Vista Basic, and the printer is connected via usb.
thanks
Wendy

Similar Messages

  • My Photosmart C5380 printer green instead of black

    Occationally my printer is printing green instead of black.
    Sometimes it is from the beginning of a document and sometimes it is the middle of a document.
    I have tried to change the cartridge but have the same result.
    Best regards
    Torben Arp
    This question was solved.
    View Solution.

    Hi @tobby37 ,
    I'd like to help you with this issue, the black is printing in green sometimes. You have changed the cartridge and are having the same results.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    Try these steps to see if it will resolve the issue.
    'Ink cartridge problem' Message Displays on the Printer.
    Please disregard the title.
    Are you using Genuine HP Cartridges?
    What are the ink levels?
    Please let me know if you require any additional assistance.
    Have a fantastic day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Green instead of black

    Hi, my printer(photosmart 7550), print green instead of black, i tried with up-to-date the drivers and clean the cartridges but nothing is changed.
    This problem happens with photo(full), color, and normal cartridges.
    What's the problem? thanks
    This question was solved.
    View Solution.

    Why? The same black cartridge is used for documents and photos?
    I have 3 cartridges: black, colors, and photos.
    this is a document printed:
    (http://img189.imageshack.us/i/dsc01501ka.jpg/)
    this is the diagnostic print(2 image but same print):
    (http://img684.imageshack.us/i/dsc01500k.jpg/)
    (http://img641.imageshack.us/i/dsc01498qi.jpg/)
    Thank you

  • Office jet pro 8600 how to default to black ink only when printing from my ipad

    Is there a way to set an option to print black ink only when printing from my Ipad 2?
    When I use the print icon the only option that shows is double page. I would like to be able to print black only.
    I can set that option when printing from my pc....
    This question was solved.
    View Solution.

    Hi,
    Airprint does not support Black ink only printing, however the HP ePrint app allow it.
    Be aware that the option is only available for documents (e.g Office files, PDFs, Web pages and emails) but not for Photo files.
    You may find the steps to get and use the app in the document below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&cc=us&dlc=en&lc=en&product=4323659&tmp...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • The camera app on my iphone 4S is crashing and while using the rear video cam black wavy lines are appearing but only when exposed to flurescent light in addition to the front cam... can any one please tell me what is happening???

    the camera app on my iphone 4S is crashing and while using the rear video cam black wavy lines are appearing but only when exposed to flurescent light in addition to the front cam... can any one please tell me what is happening???

    Try resetting your phone by holding down the home and off button until the apple symbol comes up. Then if still doing, restore your phone in itunes from your backup.

  • Text in one area of a document is underlining in green instead of black!

    I am editing a document in Pages that was originally created in Word.  It was all typed in Black originally but now one heading is persistently underlining in Green.  I have tried everything possible to get it to underline in black but even deleting the original heading and retyping it is refusing to change from green - I need this answer ASAP as it's a CV and needs sending off for a job application today - any help gratefully accepted!!!!

    What version? and is it on iPad or Mac?
    1. It may be showing grammar corrections
    2. Have you tested printing this to a pdf to see if actually prints to pdf as green?
    3. The color of underlining is determined in the Fonts palette:
    Peter

  • How can I print black ink only when in automatic two-sided mode for Officejet 6500?

    When I set the printer to automatically print on two sides, it only allows color or high quality grayscale as print color options.  If I print on only one side, then I have a third option for black ink only.  Does anyone know how to get black ink only while getting two sided printing automatically?
    This question was solved.
    View Solution.

    Sorry, this is not an option.  When printing the front page of a duplexed page the black is underprinted with color to make the print "set" and dry faster.  As a result "black only" is not an option when printing automatically duplexed pages.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Officejet Pro 8500A Plus - vertical black lines only when autofeed

    I have multiple black lines (darkest about 3 inches from left) when I autofeed a print document. When I feed a clean sheet, I get the single dark line. There are no lines if I copy using the top glass,  I followed the HP autofeed cleaning instructions TWICE. The white rollers were clean and only slight black smudge on the black rollers. I am certain this has happened to others...Oh yes, my HP warranty expired in late March (Costco may cover it if this is not a simple fix).
    I would appreciate any assistance, as this has been a great printer.

    This article should help out with the problem you are facing. Give the steps outlined a try and let us know if it helps. 
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Icons instead of thumbnails, but only on specific file type

    I have windows 7 and am using MS 2007.
    Thumbnails work for some of my files: images and powerpoint, but not on files for pdfs, excel and word. Except if someone was using Word for Mac and sends me the file.

    Hello KylieJ,
    Try one of the below method and let us know the result.
    1. On the picture folder, Click on
    Organize, then Folder and Search Options.  Click the
    View tab.  Make sure that "Always show icons, never thumbnails"
    does not have a check mark next to it.
    2.    In control Panel, Click on the System icon. Click on the advanced system settings link. Under Performance, click on the Settings button. In the Visual Effects tab, Check "Show thumbnails instead
    of icons.”
    3. Run disk cleanup and place a check in front of "Thumbnails."
    Hope this will solve your problem!

  • PB display completely black, but only sometimes. Any thoughts?

    The computer is an older PB G4 Titanium 500Mhz. Currently running OS X 10.4, though I am in the process of a second erase and installing 9.1 that came with it.
    Out of nowhere last week the screen just froze, on restart it was completely black. But after turning it on and off a few times the screen will appear, but it will freeze within a half hour or so of use. I have erased the drive and reinstalled a new system, ran the Hardware Test, replaced the battery(as it wasn't holding a charge), and the power cord which was showing signs of wear.
    I don't believe it is the inverter as the screen is not even faint, it's completely "off". The only thing that I am able to do on a consistent basis is start up from the installer CD. This is what leads me to believe it's not the display itself. But at this point I am beyond baffled.
    Anyone encounter a similar issue or have any idea what could be going on?

    Apologies, wrong board.

  • When I try to turn on my old ipod nano it will flash and then go black again. only when its hooked up to the computer. whats wrong with it and how do I make it work?

    Ok. My brother has an old Ipod nano. It's the tall one with the tiny screen. Anyway, he tried to turn it on one day and it just flashed white and then went black again. We tried everything we could and it still wont work. Now it wont flash unless it is plugged up to the computer. How do I fix it so it will work again?

    Have you checked the volume button? It might be physically stuck. To determine whether a hardware repair is needed, you need to follow these steps:
    1. Try doing a hard reset:
    Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
    After that: test the device to see whether the issue is solved.
    2. If the issue is not solved, you should backup the device and restore it as new.
    In that case, use: http://support.apple.com/kb/HT4137
    NB: set up as a NEW device because a software issue will be in the backup.
    If the issue persists after restoring as new, you should offer the device for service.
    If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
    Good luck
    Stijn

  • Text aligns centre instead of left, but only on Windows 7 PCs.

    I have designed a website on a Mac in CS5. It works fine on all Macs and PCs running XP/Vista but there are problems on Windows 7.
    For some reason text boxes that I have aligned left work fine as mentioned above, but every text box aligns centre on Windows 7 PCs.
    Can anyone offer any advice please? I'm pretty new to this by the way!
    Many thanks!

    This is how it looks on my Mac and how it should be.
    This is on the PC with blue boxes (thanks for link will check that out) and all text centered.
    Like I say, text displays fine on windows XP in explorer and firefox, just not on Windows 7 PCs.
    Any ideas?

  • HP Officejet Pro 8600: How do I get my printer to print black and white when sending it an email?

    Whenever I send my printer an email, it automatically prints it in color. Is there a way to set it so that it can print in black and white?

    Hi Beemo,
    I see that you're wanting to print in black ink only.  
    I have a couple of questions for you.
    Are you trying to print black ink only while using ePrint?
    Are you trying to use black ink only when printing from computer? 

  • How do I print in black ink only for a HP office jet 6200?

    I'm new to my Macbookpro I just got and having problem printing emails,web info etc in black ink only. I have a HP officejet all in one 6200 printer and have tried but can't find any options for changing to black ink only when the print window comes up. I've checked for software updates and nothing there. I'm not very computer smart but I'm trying my best to figure this out. I've spent hours on this so far. Can anyone help me out?

    Hi,
    Follow the steps below in order to print using Black Ink only:
    1. From the application used to print, click the File menu and select Print.
    The Print window appears.
    NOTE: The Print window might be minimized - Click the Show Details button to see all available settings.
    2. To access the color options, click the lowest selection box listed as the name of the program (e.g. TextEdit)
    Will appear as Copies & Pages within Microsoft Office applications.
    3. Select Paper Type/Quality from the drop-down menu.
    4. Click the triangle next to Color Options to expend the settings.
    5. Set the Color field as Grayscale.
    6. Set the Grayscale Mode as Black Ink Cartridge Only.
    You may save the settings for future use by clicking Presets > Save Current Settings as Preset...
    A used preset will remain as default till another preset will be used.

  • Black ink only & double side printing

    This is regarding a printing issue using my newly bought printer. I wish to print double sided using the option black ink cartrige only under grayscale printing. However, when I select double side printing, there were only 2 options under the grey scale printing (off which means color or high quality). Is there a way to select both double side and black ink cartrige? Furthermore, does grayscale printing using high quality option uses ink from the black ink cartrige or also from the color cartriges? thanks in advance

    What printer model? What operating system?
    Generally there are two options for grayscale printing, either "use black cartridge only" or not.  If the "use black cartridge only" box is not checked color ink will be used as it provides better print quality.
    Some printers and some drivers do not support "black cartridge only" when printing in duplex mode.  In duplex printing a small amount of color ink may be used to underprint the black print to make it dry faster to prevent smearing in duplex printing.  (Not intuitive, but it is correct....)
    See here for some information on how ink is used.  Some ink will be used for servicing even when printing with black ink only.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for

  • Viewing clip in full screen mode

    I have not figured out how to view a clip that I have imported into FCE in the full screen format like you can do in imovie. Anyone have any suggestions? Thanks TimHA

  • Which codec should i use to edit with?

    hi guys, i know this would be a very obvious question to most of you, and i did have a look for an answer to this through adobe's forums but i could not find and answer. the footage comes out of my video camera as h264, what should i convert this to

  • Auto-Run Code on OC4J start

    Hi, Is is possible to Auto-Run a piece of code, either by calling a method on a Session bean or calling a Servlet, when OC4J is started up? Cheers, Ro

  • Future of CRM SAP Mentor Public Webinar - August 18th

    Hey folks please join your fellow SAP CRM SAP Mentors for a future of SAP CRM conference call on August 18th at 9AM PST.  You can find the details be reviewing this weblog: /people/stephen.johannes/blog/2009/08/04/future-of-crm-public-sap-mentor-webi

  • TO get graph between month and value

    Hi Gurus, Please help me , i had to make Graph between values and month and for every year lines should be different . its basically a stock vs time graph thorough ABAP coding. i had itab which have value for every month , but how to plot it i not ab