HP Deskjet 930 C driver help!

i tried to manually load the driver for my printer and its not on the list? HP Deskjet 930C can anyone help me?

Hi,
No more driver supported from the Vista ages that means at least 6 years:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=60096
Probably it's time to buy a new printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Hp deskjet 2545 printer driver not supporting on windows server 2008 r2

I have purchased a 3 in 1 hp deskjet 2545 printer. I am trying to configure in on my home laptop (HCL) operating system: windows server 2008 R2, but unable to configure it. customer support executive told me hp deskjet 2545 printer driver is not compatible on windows server 2008 R2. but I have checked in my office and it is working fine on my office 2008 server. Please help.

Hello Arvindk,
Welcome to the HP Support Forums! I understand you are trying to use your HP Deskjet 2545 with your Windows Server 2008 R2. Because you are using a server your question will be best answered on the Commercial Forums: http://h30499.www3.hp.com/hpeb/
I was able to find this document for Installing the Printer Software on Windows Server 2003 or 2008, which may be helpful for you.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Your file could not be print due to an error on HP Deskjet PCL3 class driver on.

I purchase a new printer HP Deskjet Ink Advantage 1515, I successfully installed it but the problem while im trying to print the document is "Your file could not be print due to an error on HP DESKJET PCL3 Class driver on."

Hi limarache,
From what you have described, it sounds like you are using a alternate print driver rather than the driver for your printer. Please use the HP Print and Scan Wizard to help you troubleshoot this issue.
The Print and Scan Doctor diagnoses and helps resolve common printing, scanning, and connectivity problems, including:
Connectivity :
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test : Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check : Checks for missing or corrupt driver files.
Device Manager : Checks for problems in Device Manager that would prevent printing.
Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match : Checks the port settings for the HP product.
Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
Ink Issues : Checks the cartridges and ink levels for issues that affect print quality.
Print Settings : Checks and adjusts the print quality settings.
Test Print : Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests : Checks the scan mechanism, drivers, and registry entries.
Click here to download and run the utility > HP Print and Scan Doctor
Please let me know if this resolves the issue, or if you require additional assistance, thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP deskjet D2300 series driver not working in windows 7

This procedure is much too complicated for an average user. You know that millions of Wondow XP users are switching to Windows 7. I' sure that most of them are facing similar problems. HP should come with a user friendly solution that solves the above issues. Don't you think?
My problem remains unsolved.

Hi dvh,
Welcome to the HP Forums!
I see that your HP Deskjet D2300 series driver not working in windows 7.
Do you see any error messages with the installer? Or does it just close out and doesn't install?
In the meantime, please try using our HP Printer Install Wizard for Windows.
Hope to hear back from you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Disk utility tells me to start my computer with my osx disk, then repair the hard drive , help???

disk utility tells me to start my computer with my osx disk, then repair the hard drive , help???

Hi prkrgrp,
I'm sorry, I'm a bit unclear on the exact nature of your question. If you are having issues starting up from your original Install Disk and running Disk Utility to repair your hard drive, you may find the information and steps outlined in the following articles helpful:
Using Disk Utility to verify or repair disks - Apple Support
Resolve startup issues and perform disk maintenance with Disk Utility and fsck - Apple Support
Regards,
- Brenden

Lost Deskjet 5740 printer driver after upgrade.

Lost Deskjet 5740 printer driver after upgrade. HP site has a download but it does not appear in the driver list after downloading it. Ideas?

Okay, as of last night, both the printers are working fine. I uninstalled the 5740 and then tried several different rearrangements of the two printers. First I tried hooking the 5150 to the AEBS and it printed fine. Then I tried hooking the 5740 to the AE and it printed fine. Finally, I tried my original configuration with the 5740 hooked to the AEBS and it printed fine! Very frustrating.... I'm not sure if Apple sent an update I downloaded in the meantime that fixed the problem or what. I can't think of any other possible explanation.
So to recap, I can vouch that I have an HP Deskjet 5740 connected to an AEBS and an HP Deskjet 5150 connected to an AE, all set up on a WDS (wireless distribution system) with Leopard and everything works as expected. Hopefully your printer magically started working again as well Bibycat.

Help locate HP Deskjet 5900 series driver download (Windows 7)

Hello, when I plugged in my old printer to my laptop which has Windows 7 on it. It says that the driver wasn't found. I tried finding the driver download on here, but could only find one that was compatable with old versions of Windows can someone help me locate a windows 7 compatable version?
HP Desktjet 5900 series

Hello jordanyHD, Welcome to the Forums!
I just came across your post and noticed you are looking for drivers for your Deskjet 5900 series printer.
As I am unsure of which exact printer you have, I am not able to see if the driver is available for Windows 7. If you wish to respond with your model number, I will gladly check for you!
Please click this link and type in your printers exact Model Number to see if there are available drivers for your specific printer model.
HP Drivers & Downloads
Take care,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Hp deskjet 3520 print driver won't install

I bought an HP Deskjet 3520 printer today which was advertised as compatible with OSX 10.7, however when I go to add the printer I get the error "The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software."
I have the latest driver from HP, I just downloaded it today.
I deleted my old HP printer from Print & Scan in the System Preferences and uinstalled the old HP printer using the HP uninstall software.
When adding the printer it said there was an update available from Apple, which it downloaded but then gave the same software unavailable error.
I can scan with the printer but not print.
I also have a wireless HP Laser printer on my home network which is a couple of years old.

Have you tried selecting the software yourself rather than letting it add it for you? This usually helps.
1) Go to Select Printer Software in the drop down menu.
2) Type in the name and model of your printer: HP Deskjet 3520.

HP DeskJet 2510 Printer Driver conflict in Windows 7 64bit

I have just changed my PC from Windows XP Home to a new machine running Windows 7 64bit. I installed the DeskJet 2510 printer from the CD/online and it was fine apart from a lot of errors in the Event Viewer:-
"The print spooler failed to load a plug-in module C:\Windows\system32\spool\DRIVERS\x64\3\UNIDRVUI.DLL, error code 0xc1. See the event user data for context information."
From looking on the web it appeared that the solution may be to reinstall the driver which I did, by uninstalling then completely reinstalling the Basic Device Software. Since reinstalling (several times now!) the HP Print & Scan Doctor is reporting a Printer Driver conflict and suggesting that uninstalling and reinstalling is necessary! As I havealready gone through this loop several times I am wondering if there is a bug somewhere.
The Test Print page is fine and everything appears to work correctly apart from continuing error messages as above, up to 4 at a time, mainly when printing envelopes from MS Word.
This question was solved.
View Solution.

hhhuummmm....
Maybe I have missed a step. Let's try opening the Device and printers, clicking on the printer so the Printer server Properties option appears, click server Printer server Properties, but then click back on the Device and Printers window. Delete the printer icon from here, then return to the Printer server Properties window and delete the driver.
If this works I am sorry I didn't think of it sooner
Keep me posted!
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Deskjet 3070a + Mountain Lion - HELP!

Hi all,
Just upgraded to Mountain Lion.
Trying to reinstall my HP printer.
Didn't have a great experience with the scanner on Snow Leopard but the printer worked ok - eventually.
Now it just ain't working again.
Scanner - failed to open a session on the device
Printer - preferences show its added )I used HP Deskjet etc instead of AirPrint. Not able to connect to print a test page.
Wireless - can't enter the IP address in safari and link with the printer.
I have updated all software from mac and hp.
Help - this is very frustrating.
G

Since your Printer shows as added, you can use the following instructions for Scanning, and Printing, by going to System Preferences, then select "Print & Scan", and follow these directions from HP's website:
How do I scan with the driver from Apple Software Update?
Depending on your printer and the type of driver update, you might need to scan in a different way than you did before you installed Mountain Lion.
Scan from the Print & Scan window:
Place the item that you want to scan on the scanner glass, or load it into the automatic document feeder (ADF) if your printer has one.
Click the Apple menu ( ), and then click System Preferences .
Click Print & Scan ( ).
Click your printer in the left pane.
Click the Scan tab, and then click Open Scanner .
Click Show Details . The details of the scan display, including options to change scan settings.
Figure 5: Show Details scanning screen Image: Show Details scanning screen
Change any settings as necessary, and then click Scan .
NOTE:
Make sure to select either the Flatbed mode or the Document Feeder mode, depending on your printer and how you plan to scan.
Hope this helps

Windows 7 x64 on G6230 driver help(camdriver)

we just installed x64 windows seven on our lenovo g230 but we're having problems installing the camera drivers and energy management...we used the vista cd driver that came along with the unit(all the drivers work well except those two)
need help in here T_T..i also downloaded vista drivers on Lenovo but still doesnt work..hope someone help me in this..

we have the same problem but worsst... graphics drivers not complete, printer driver and bluetooth having problems.............. pleassssssssssssse neeeeeeeeeddddddddddddd help

Failed Hard Drive Now Windows 7 Home Premium Fails Validation on New Drive -- HELP

How do I validate Windows 7 HP OEM version when I had to move everything to a new hard drive? Thanks in advance.
This question was solved.
View Solution.

I don't see any mention of your trying the guide that was in my previous post, so here it is again
http://grok.lsu.edu/article.aspx?articleid=16651
Since you say it is Windows 7 HP OEM version, I am assuming the laptop came with Windows 7 Home Premium
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

External Hard drive help: use with mac and pc? how to backup everything etc

Hello! I need some help regarding a new external hard drive I got from OWC. It is a 500 gb firewire 400 + usb 2.0 7200 rpm hard drive. I am running it from firewire. The software suggests the first thing you do is make a clone of your macbooks internal hard drive, that way if it fails later you can use the external to back everything up. If I do this ...
1. do I have to make the drive "Bootable" ? I have software called Data Backup 3 by Pro soft I think. It came with my external.
2. Can I still back up other stuff like my audio recordings and record onto that drive to a seperate folder?
3. If I make a bootable copy will it try and boot from the drive everytime I turn it on or something?
My other question is... how can I use this drive with a pc? I have a pc as well and I heard that the only way it will work is to format it in ms-dos mode (fat32?)
If I write it to fat32 will it slow down my drive or make it worse? I heard that you should format external drives specifically for mac if you have a mac; so it will only work with macs...
(sorry this is going on and on; it's like a chain reaction of questions)
so If its formatted to mac drive format then can I do this with my current situation:
1. I have wireless internet, the router is on a pc downstairs
2. Can I send files over a network somehow from the pc to my mac
3. then store it on my external?
If so can someone point me in that direction with a link?
Thank you for reading, sorry for making this so long.

1. No, you don't have to make a bootable clone.
2. If you use the drive for a bootable backup, then you cannot use the drive for other types of storage unless you partition the drive and make more than one volume.
3. No, it will not try to boot the computer. You must designate the startup volume using Startup Disk preferences.
If you wish to use the drive on both a Mac and a PC, then either you make two partitions - one for Mac and the other for the PC or you must format the entire drive using FAT32 so the drive can be used for read//write by both operating systems. If you do this then you cannot use the drive for a bootable backup nor can you use it with Time Machine.
FAT32 is slower for read/write on the Mac than using Mac formatting.
Optimally, I would suggest you partition the drive into two volumes. One volume formatted for the Mac and the other formatted FAT32.
You can send files from a PC to a Mac and vice-versa using File Sharing. Select Mac Help from the Finder's Help menu and search for "file sharing" or "sharing" to find help articles. Also see,
Mac OS X 10.5 Help- Setting up a Mac computer to share files with Windows users
Mac OS X 10.5 Help- Setting up a Windows computer to share files with Mac users
Mac OS X 10.5 Help- Sharing with Windows computers

Weird problem involving my external hard drive - help please!

I recently got a formac mini 120 gb firewire hard drive, which had been working fine with my g4 quicksliver.
i then went to a friends (g5 machine) with my drive and he put some data on it - bought it back to mine and managed to re connect the drive and take the data - no problem - very happy.
I recently gave my drive to another friend using a g5 and when it came back, nothing - i don't get the drive symbol appearing. turned the comp on and off many times and tried re-connecting etc still no drive appearing.
Then i took the drive to my friend with a mac lap top power book. connected there - working fine. Baffling. was happy that my data can still be accessed.
I know it's not the firewire cable because i can get power to the drive - i can see the red light at the fron on.
Can anyone help with this weird problem?
Thanks

Thought you could use this info about getting FireWire to work!
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that did'nt work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Yours might be the 10.4.10 Combo update. I have no idea since you did not fill out your specs. fully when you signed in to this site. Others reading, download the Combo that applies to your system. This link is for PPC Macs not Intel Macs.
If that still did'nt get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good! Also, here is Apple doc.#88338 on getting FireWire to work.
Good Luck!
Cheers!
DALE

Changing dvd drive help

I have a presario S7150 and want to change dvd/cd rom drive. New drive is S ATA old one is IDE, cant find where to plug the SATA cable into .
Do I need an adapter or is there a place to plug in on the motherboard and if so where.

That motherboard does not have SATA ports: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00100539&tmp_task=prodinfoCategory&lc=en&dlc=en...
There are choices, however.
1) Install a PCI adapter card:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1281807&CatId=1455
2) Get a different DVD drive. They still have IDE drives available:
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007589%20600003705&IsNodeId=1&name=ID...
3) Get an enclosure for the drive that was purchased to make it USB:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817145068
4) replace motherboard with newer device interfaces (not recommended for you hardware)
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

HP Deskjet 930 C driver help!

Similar Messages

Maybe you are looking for