HP desktop m9077c - access to expansion bay to add a hard drive

Hello friends,
I am trying to add a new hard drive in to the open hard drive bay . I am struggling to get access to the bay. Can some body mail me or give me pointersto info on how to open this desk top? I was able to open ip the side panel and found the power/data connectors for my SATA drive!
Is there a way to remove the front panel - which may give better access?
thanks for any help!
-malone
Message Edited by malone on 11-05-2009 10:01 AM

Here is the Service Manual:
Manual
There can only be one ordinary 2.5 inch hard drive and it is a bear to get to. Trying to do so will void the warranty. You have to remove the top cover. This series of video clips is even better than the Manual to show you what all is involved:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c04339451&lc=en&jumpid=reg_r1002_us...
The "second" hard drive is an M.2 mSATA drive and it is even harder to get to. It is on the motherboard so the motherboard has to be removed to access the slot.
See pages 71-72 and page 66.
You do not need a caddy or anything to install the M.2 mSATA drive. It plugs in the slot and is held down with a single screw.
They look something like this....the three "prongs" are critical but they come in different lengths:
The M.2 mSATA mSSDs are the fastest type of storage on the market. The new "trash can" Mac Pro uses them. They tend to run a trifle on the pricey side and are not yet widely available but getting better.
If this is "the Answer" please click "Accept as Solution" to help others find it.

Similar Messages

I have tried and failed to copy my iTunes library and playlists from my Windows 8 desktop to my Windows 7 laptop using an external hard drive. Can it be done? Help would be appreciated.

I have tried and failed to copy my iTunes library and playlists from my Windows 8 desktop to my Windows 7 laptop using an external hard drive. Can it be done? Help would be appreciated. I have followed instructions found online but the library of music doesn't pull in. Thanks!
Nate

Migrate an iTunes library from one computer to another
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entireiTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one, with ratings, play counts, playlists etc. preserved. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd normally recommend method 1 since it establishes an ongoing backup for your library and unlike copying with Windows Explorer the process can be resumed if it is interrupted and it will continue to the next item if there are any read/access errors.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See Make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then seeRecover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

How can I restrict access to add. internal hard drive by account?

Hello! Okay, so I am my computer's administrator, and I have a secondary 'guest' account that anyone else can use. So, I know that all my data on my main, OS hard drive is secure from the guest account accessing it, but what about the additional hard drive that I have installed?
I have a good deal of sensitive data and files stored (and aliased) on my second internal drive that I do not care for 'guest' users to stumble upon. How can I restrict access to the secondary storage hard drive from my Guest login account, and/or just plain hide it from it? Surely, there is a need for this that has brought about a solution. Any tips/advice/solutions?
Thanks!!!
=)

Click here and follow the instructions followed by placing the folders and files on the image; if the password is in the keychain, it will be supplied whenever you're logged in.
(41018)

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

I can't access password protection manager on my External Hard Drive to unlock it

I can't access password protection manager on my External Hard Drive to unlock it , its kind of infected by a virus I guess and it is not bring me the password protection manage screen to enter password and access my data...
Solved!
Go to Solution.

Hi vahid22! Please provide the model number (usually on the bottom of the unit) of your Sony External Hard Drive. Thank you!

After iPhoto upgrade i can no longer access the photos stored on my external hard drive, after iPhoto upgrade i can no longer access the photos stored on my external hard drive

I was just about to order a photo book, using photos stored on an external hard drive. I organised the book and pressed 'buy'. IPhotos instructed me that I needed to upgrade and so I went on the ASpp store, bought the upgrade and installed as directed. I then used the iPhoto Library upgrader as directed.
After the iPhoto upgrade I can no longer access the photos stored on my external hard drive. I am able to access the photos stored on my internal hard drive - the remainder (including the photo album) seem to have vanished into thin air.
Any suggestions please?

What format is the external drive?

Can't access Password Protection Manager on my External Hard Drive to unlock it

I can't access password protection manager on my External Hard Drive to unlock it , I got updated antivirus and I always use safely remove to remove the hard drive. I see the UNLOCK APP Drive, and the Public Area, but when I run the "Password Protection Manager.exe" file at UNLOCK APP Drive, the bar will just be fulfilled by approximately 60% by showing "Loading...", then it stops for many seconds, and it starts to run the Installation file (PasswordProtectionManagerSetup_F.exe) which will delete all unlocked files if I accept it to install.
2 TB External Hard Drive Model HD-E2
Model No.: OAW1AGK370300BF
201307
Please let me know how I can access my protected files (the locked drive).

Hi vahid22! Please provide the model number (usually on the bottom of the unit) of your Sony External Hard Drive. Thank you!

My hard disk crashed and I cannot find out how to "contact customer service" other than this forum. The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive. Please help.

My hard disk crashed and I cannot find out how to "contact customer service" other than this forum. The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive. Please help.

Hi Anthony ,
Here is the link to connect with Adobe Chat Support.
https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
Hope your query gets resolved .
Regards
Sukrit Dhingra

How can i add the hard drive to my desktop

how can i add the hard drive to my desktop

bobbyruff,
open the Preferences in Finder and click on the General tab. Look for a checkbox entitled “Show these items on the desktop: Hard disks”. Check it and close Preferences.

I cant access my itunes file from my WD hard drive?

i can't access my itunes file from my WD hard drive?

You might find this article useful: iLounge - Managing your iTunes Library on an External Hard Drive

Question re Accessing catalogues and files from an external hard drive in Elements 6.

Having just acquired an ehd, I have successfully carried out a trial back up of an Elements 6 2000 picture catalogue from an XP based PC, using the Elements 6 full back-up process. This process is intended to be used eventually to transfer this and other catalogues onto a new Windows 8 PC installed with Elements 11.
However, in the interim I would also like to be able to access the picture files and the catalogue data on the ehd from a Vista based laptop which also has Elements 6 installed. Can you please advise how to do this without carrying out a full restore process that would load all of the files onto my laptop's hard drive.
In transferring the picture files to the ehd I also seem to have lost the original file structure that was on my PC, as folders have been renamed numerically and are all held individually in the main folder of the ehd. Whilst this doesn't matter too much whilst the files remain on the ehd, provided the catalogue still knows where to find them, has the original file structure been permanently lost, or can I recreate it when I eventually restore the files and catalogue on the new Windows 8 PC?
I'm anxious to get this process right as I have a much larger catalogue to similarly back-up and transfer, once I have acquired the new PC, and was hoping to be able to similarly access this catalogue by my laptop from the ehd as there is insufficent hard disk space on my laptop to hold all the 20,000 files involved.
Please help
Gardener 179

Thanks for your help re my original questions.
Reassured regarding not having lost the file structure of my pictures, and bearing in mind the relatively small catalogue I had backed up, I thought that rather than restoring by leaving the picture files on the EHD, I would after all restore to the laptop hard drive, as a trial run before dealing with my main catalogue.
The restore was successful but raised a number of further issues that I would appreciate your advice on:-
1) The original catalogue name was not used in the restoration process. The restored catalogue on the laptop has simply been named "Pictures". Is this normal and if I now rename the restored catalogue will this create problems with any subsequent supplementary backups of the catalogue?
2) In restoring the catalogue I heeded the Adobe Help and specified the Vista folder C:\Users\Maurice\Pictures as the location for the picture files rather than simply restoring the original XP folder structure. However, since I also wanted to retain the lower level folder structure of my XP files (which are basically date files) I then specified to "Retain the Original Folder Structure". This has resulted in the full XP folder structure being created within \Pictures on the laptop.
Is it possible to avoid this situation occurring, or will I have to remove the unwanted XP sub-folder structure from the laptop and reconnect the thumbnails in the Photoshop catalogue to the new file locations? Also if I have to move files in this way will I once again have problems with any subsequent restorations of the same catalogue?
I have also a couple of supplementary questions re the initial backup to the EHD which I have now looked at more closely:-
1) The original XP catalogue has 1853 picture files, (and this is identical to that subsequently restored on the laptop), yet in backing up the catalogue to the EHD it seems that in excess of 2200 picture files have been created. Why is this?
2) As previously advised the pictures are held on the EHD numbered sequentially as "b000001" etc, and due to my selecting the EHD top level root folder as the destination for the back up are held in F:\. Should I have created a new folder, say "Backup 1" on the EHD, and then specified this as the destination folder, as I am concerned that on backing up further catalogues the existing picture files will get overwritten and the Photoshop Backup and Catalogue files confused with previous backups? If so can I move the existing back up files to a new folder now without causing any problems?
Finally could you confirm what would have happened to the folder structure on the EHD had I carried out the Restore process by locating the picture files on the EHD but retaining their original file structure. Would the picture files have been copied into their original file structure for use by the restored catalogue and the duplicate backup files left unaltered, or would the backup picture files have been replaced by the restored file structure? Also would the "catalogue file" be transferred to the Laptop C:\ drive in this process or would this also stay on the EHD and be accessed from there by Photoshop?
Sorry for all the questions but I really want to fully understand what is going on before risking doing anything to move my main catalogue.
Regards

Had my hard drive replaced and I've restored from TimeMachine backup. I have changed my username and now I can't access my old backups on my TimeMachine hard drive

I've recently had my hard drive replaced in the Apple Store.
I used time machine to backup and after I got my mac back with the new hard drive I restored all my files which are now on my computer and I can access it with no problems.
The problem is that I've changed my username (admin) and when I enter time machine, I can't access the backups of my old hard drive which is really frustrating.
A red negative sign appears on most folders. Also in macintosh HD/users there is a folder named with my old username and I get the same red negative sign in the folders.
Any idea what can be done about this?
If you need more info just ask.
Thanks in advance

Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
When you're done, turn TM back ON and close its preference pane.

Can't access my apple lossless files on external hard drive after reinstalling windows 8.1

Hi guys
New to this. I reinstalled windows 8.1 after windows continually asking me to change my password after not recognising it despite it being the right one. All my apple lossless tunes are on my external hard drive. Windows keeps saying 'I don't have access to this file currently'. I tried right clicking on hard drive, clicked properties, and tried assigning administrator rights to everyone but still no luck. Contacted windows who said it was an apple issue so here I am.
Can anyone help. I've got 900 albums on this hard drive and the thought of ripping them all again is stressing me.
Thanks guys
Stuart

Changing the path to the media folder doesn't change which database iTunes opens. If your original database is on the external drive then shift-start-iTunes and use the choose option to open it. If you no longer have access to the original database shift-start-iTunes and create a new empty library at X:\iTunes, where X: is the external drive letter, ensure the media folder is set to X:\iTunes\iTunes Media, move all of your content inside X:\iTunes\iTunes Media, use File > Add Folder to Library > X:\iTunes\iTunes Media. See also Recover your iTunes library from your iPod or iOS device. There are some scripts near the end that can extract ratings, play counts and playlists from your device and the rest of the tip explains how you backup and restore the device with the new library to avoid losing data.
tt2

How do I access my iTunes media from an external hard drive?

I have a new MacBook Air and want to access my media files from an external drive. I previously had a MacBook Pro and had to move all media to an external drive because I ran out of space. I've tried launching iTunes, going to Preferences, going to the Advanced Tab and then moving the location to the external drive and got this question: Would you like iTunes to move and rename the files in your new iTunes Media folder to match the “Keep iTunes Media folder organized” preference? Should I say yes? If I say yes, will iTunes be able to automatically find my files on the external drive?

hey, basically i had the same problem as you. i had all of my itunes on an external hard drive and just bought a macbook pro, so here is what i was told to do....plug in the external hard drive to your MBA and then when you open itunes hold down the option button while you click and hold it down till you see a pop up window, it will ask you what library you want to use, click choose library and choose the itunes file that is on your external hard drive. and then all of your stuff will be in the itunes.
what i have seemed to run into though is, when the external hard drive isn't plugged in itunes won't open unless you choose another library or plug in the external hard drive. - my question is this, should i open another library on my macbook pro's internal hard drive so i can at least look at itunes when i don't have my external hard drive connected. my old macbook did this, it would point to another library on my macbook and i would still be able to see all of my media but couldn't play it without the external hooked up, is there a way to do this on lion?
i hope i was able to answer your question sam and hopefully can have my question answered too.
thanks!
- sorry sam, don't mean to hijack your thread but hopefully it will help us both - i don't want to store any media )movies, music, podcasts, apps, any of that stuff on my macbook pro's hard drive, so say there is a way to get itunes to open without my external hooked up and i can still see my media, or not see my media and i want to download a song or a app that i see when i am not near my external....what is the easiest way to get that file onto the external and not have it taking up space on my macbook pro's hard drive? sorry for all the long questions
Message was edited by: thenumbersarebad - thought of one more thing - sorry

Which device can i use to broadcast a wifi signal without internet access? I want to connect a hard drive to this device and access it from my ipad.

I want to be able to access a hard drive wirlessly from my ipad. There is no internet available. Can i make this work?

An AirPort Extreme can do this, as well as a Time Capsule....which is an AirPort Extreme with a built in hard drive.
In either case, you will need an App like Filebrowser installed on the iPad to be able to access the data on the hard drive. More info on Filebrowser just below:
Stratospherix - FileBrowser - Overview

HP desktop m9077c - access to expansion bay to add a hard drive

Similar Messages

Maybe you are looking for