HP EliteBook 8540w - drivers can't load for network adapters

Seriously. This is how I imagined life before the the internet. It's horrible.
So here's the deal...I suspect that all of this could have stemmed from some new VPN software that I installed for work. I'm not 100% sure that that's the issue but that's the last thing I installed, before windows did a software update, before the issues started to occur.
Here's what's happening:
I cannot enable my wireless
I cannot access the internet via an ethernet cable.
There are a lot of adapters showing up in my device manager...I'm not sure how many of them truly belong there. For example, my NIC card..."Intel(R) 82577LM Gigabit Network Connection - Deterministic Network Enhancer Miniport"...there's also this one "Intel(R) 82577LM Gigabit Network Connection #2"
There are a number of adapters that have an exclamation mark next to them. I cannot unstall them.
I do not see the exclamation marks when I start the machine in safe mode. I do see them when I start in safe mode with networking
I have tried downloading drivers from Intel...I was not able to install them.
I am the admistrator of the machine.
Can anyone help? I'm kind of at a loss here.
Thanks in advance!

Hi
Frist try to install the chipset drivers
Intel Chipset Installation Utility (American, International)
N then
Intel Management Engine Components Driver and Interface (International)
and then Choose the N/w card Driver of choice
Ericsson Mobile Broadband Drivers (International)
Intel Wireless Drivers for Microsoft Windows 7 (International)
HP Travel Hub and LAN Drivers
Intel 82577LM and 82577LC Gigabit Ethernet Driver (International)
Qualcomm Mobile Broadband Drivers - Gobi2000 (International)
Intel PRO/Wireless Drivers for Microsoft Windows 7 (International)
Ralink 802.11 b/g/n WiFi Adapter
Broadcom 2070 Bluetooth Software and Driver (International)
Broadcom Wireless LAN Driver for Microsoft Windows 7 (International)
Software Support for HP Integrated Module with Bluetooth Wireless Technology for Microsoft Windows 7
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

Similar Messages

Updating ojdbc drivers Can't load IA 32-bit .so on a IA 32-bit platform

I ran into some problems updating the Oracle OCI client and drivers; I downloaded the basic instant client package version 11.1.0.7.0 from the oracle website, then updated my maven pom file to fetch the ojdbc5 jar file (11.1). Then when I packaged and deployed it on my tomcat server I ran into this error when requesting from the server:
Caused by: java.lang.UnsatisfiedLinkError: /home/tongz/apache-tomcat-5.5.27/webapps/ROOT/WEB-INF/lib/libocijdbc11.so: Can't load IA 32-bit .so on a IA 32-bit platform
This error seems to stem from version compatibility issues / permissions; however even after I changed permissions to r/w on all oracle related lib files and checked that my java version is compatible (1.5.0_11), I still get the same error and don't know what could be the cause. Please advise. Thanks.
Edited by: user9272841 on Mar 10, 2010 11:49 AM
Edited by: user9272841 on Mar 10, 2010 11:58 AM

Thanks for the quick reply Chris.
You're right. When I run file libttclient.so on the different client files, I see the version 5 one is 64-bit but the version 6 one is 32-bit.
Version 5 fie: libttclient.so: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), not stripped
Version 6 file: libttclient.so: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), not stripped
The SysAdmin says they don't have 64-bit versions. Oh dear! And the developers aren't keen on changing their code to use a 32-bit JVM.
Ah well, thanks for the response.
Best wishes!

[SOLVED] Can't load wireless network (MEDIATEK Corp. Device 7630)

Hi all, I hope that someone helps me, because I need it.
I'm trying so hard to install the wireless controller I have on a new computer.
I have just installed Arch with the UEFI method, it seems to work quite fine, except for the wireless.
The Computer is ASUS F550C, in order not to lose time, I'm posting the output of what I have tried.
I tried to install the kernel module (driver) with ndiswrapper, and they seem to be loaded.
# lspci -k
03:00.0 Network controller: MEDIATEK Corp. Device 7630
Subsystem: Foxconn International, Inc. Device e074
Kernel modules: ndiswrapper
# iwconfig
enp4s0f2 no wireless extensions.
lo no wireless extensions.
I tried to load both network-manager, netctl via systemctl but it doesn't seem to work.
In the end of the day I noticed that the wifi led had been off all the time!
So I installed rfkill and executed:
#rfkill unblock all
that's the only thing I could do to let the led turn on!
If you can suggest me something (whatever it may be) please answer, or I will be linked for eternity.
Last edited by Dexxt (2014-03-05 15:49:06)

#ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp4s0f2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/ether bc:ee:7b:c8:8c:6d brd ff:ff:ff:ff:ff:ff
I am connected to Ethernet (via systemctl enable dhcp.service).
I tried to use systemctl enable netcfg.service but I get:
#systemctl status netcfg.service
netcfg.service - Netcfg multi-profile daemon
Loaded: loaded (/etc/systemd/system/netcfg.service; disabled)
Active: inactive (dead)
Last edited by Dexxt (2014-02-25 22:32:35)

Customized User Profiles not loading for Network Users

I manage Macs in public computer labs and classrooms at a university. My general set up is as follows:
Clients are running 10.8.5, OD Masters are running 10.7.5. Open Directory Master to manage client preferences for Login window and screen saver. Clients bind to Active Directory for authentication purposes only. Networked users home directories are stored locally then deleted at log out. Using Deploy Studio to image and restore clients.
My customized user profiles are stored in /User Templates/Non_Localized.lproj.(I also update English.lproj for any local users that may need to be created for various reasons).
Recently I have come across a situation where, randomly, my customized user profile does not load at Login, and I am given the out-of-the-box default Apple profile. This is happening in 11 of my 14 labs. I have three labs that seem to not be affected by this.
On some labs I manage the DHCP, some labs I do not, and rely on our Networking group to supply DHCP and DNS. Because of this setup I have six different DNS server that may be in the mix. Two are Unix boxes, the other four are the Active Directory Domain Control servers. I did create a spreadsheet of all the AD/OD settings for each lab to see if I could find some kind of pattern, but don't see a way to upload it.
The one thing I do notice is that when I do a mass login using a shell script via Apple Remote Desktop, when the profile fails to build correctly, the user login is quick, much quicker than when the correct profile loads. Almost as if a packet is sent the the OD server, it's rejected, and bam, Apple's default profile loads.
I have flushed the DNS cache of the local clients using killall --HUP mDNSResponder
I've got one week to figure this out before classes start, so if you have a clue as to what's going on, I sure would be grateful.
Here are logs from both the admin's account and the user's account when the default profile fails to build:
ADMIN log:
8/20/14 1:31:03.366 PM CVMServer[109] Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
8/20/14 1:31:03.389 PM loginwindow[44] Login Window - Returned from Security Agent
8/20/14 1:31:03.491 PM loginwindow[44] USER_PROCESS: 44 console
8/20/14 1:31:04.084 PM WindowServer[75]    **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
8/20/14 1:31:06.307 PM locationd[563] NOTICE,Location icon should now be in state 0
8/20/14 1:31:06.478 PM coreaudiod[560] Enabled automatic stack shots because audio IO is inactive
8/20/14 1:31:06.621 PM UserEventAgent[548] cannot find fw daemon port 1102
8/20/14 1:31:08.530 PM WindowServer[75]    Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:31:09.707 PM NetworkBrowserAgent[591]    Starting NetworkBrowserAgent
8/20/14 1:31:10.393 PM apsd[593]   Certificate doesn't match host
8/20/14 1:31:11.499 PM com.apple.SecurityServer[15]    Session 100010 created
8/20/14 1:31:13.561 PM genatsdb[608]   ########## genatsdb Sandboxed. ##########
8/20/14 1:31:13.562 PM apsd[593]   Certificate doesn't match host
8/20/14 1:31:13.740 PM com.apple.time[548] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:31:14.555 PM apsd[593]   Certificate doesn't match host
8/20/14 1:31:45.040 PM genatsdb[608]   *GENATSDB* FontObjects generated = 1113
8/20/14 1:31:55.663 PM com.apple.time[548] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:32:20.627 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.627 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.627 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.627 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.628 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.628 PM WindowServer[75]    dict count after removing entry for window 0x2a is 0
8/20/14 1:32:20.641 PM com.apple.launchd[1]    (com.apple.quicklook.satellite.4D0B4319-944D-49A6-A515-02F31AE3C235[628]) Could not terminate job: 3: No such process
8/20/14 1:32:20.641 PM com.apple.launchd[1]    (com.apple.quicklook.satellite.4D0B4319-944D-49A6-A515-02F31AE3C235[628]) Using fallback option to terminate job...
8/20/14 1:32:20.645 PM coreservicesd[65]   SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=188
8/20/14 1:32:20.647 PM coreservicesd[65]   SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=147
8/20/14 1:32:20.647 PM coreservicesd[65]   SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=194
8/20/14 1:32:20.648 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.648 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.648 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.648 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.648 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.716 PM loginwindow[44] DEAD_PROCESS: 44 console
8/20/14 1:32:20.891 PM com.apple.time[548] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:32:20.929 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.929 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.929 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.929 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.929 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.930 PM coreservicesd[65]   SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=158
8/20/14 1:32:22.259 PM WindowServer[75]    CGXRestartSessionWorkspace: session workspace exited for session 256 (on console)
8/20/14 1:32:22.259 PM WindowServer[75]    Session 256 released (1 references)
8/20/14 1:32:22.259 PM WindowServer[75]    Session 256 released (0 references)
8/20/14 1:32:22.259 PM WindowServer[75]    loginwindow connection closed; closing server.
8/20/14 1:32:22.268 PM apsd[593]   CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
8/20/14 1:32:22.285 PM loginwindow[653]    Login Window Application Started
8/20/14 1:32:22.299 PM UserEventAgent[11] Captive: [UserAgentDied:139] User Agent @port=45319 Died
8/20/14 1:32:22.310 PM ARDAgent[574]   CGSGetNextEventRecord (Inline) connection 0xb903, 16384 bytes
8/20/14 1:32:22.310 PM ARDAgent[574]   CGSShutdownServerConnections: Detaching application from window server
8/20/14 1:32:22.310 PM ARDAgent[574]   CGSDisplayServerShutdown: Detaching display subsystem from window server
8/20/14 1:32:22.311 PM blued[58]   -[CBManager init] init returning self:0x7ff6a3b04990
8/20/14 1:32:22.329 PM WindowServer[654]   Server is starting up
8/20/14 1:32:22.330 PM WindowServer[654]   Session 256 retained (2 references)
8/20/14 1:32:22.330 PM WindowServer[654]   Session 256 released (1 references)
8/20/14 1:32:22.333 PM WindowServer[654]   Session 256 retained (2 references)
8/20/14 1:32:22.333 PM WindowServer[654]   init_page_flip: page flip mode is on
8/20/14 1:32:22.357 PM WindowServer[654]   mux_initialize: Couldn't find any matches
8/20/14 1:32:22.367 PM WindowServer[654]   GLCompositor enabled for tile size [256 x 256]
8/20/14 1:32:22.367 PM WindowServer[654]   CGXGLInitMipMap: mip map mode is on
8/20/14 1:32:22.424 PM WindowServer[654]   WSMachineUsesNewStyleMirroring: true
8/20/14 1:32:22.425 PM WindowServer[654]   Display 0x04280480: GL mask 0x1; bounds (0, 0)[1920 x 1080], 30 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a012, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a0120000000004280480
8/20/14 1:32:22.425 PM WindowServer[654]   Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
8/20/14 1:32:22.425 PM WindowServer[654]   Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
8/20/14 1:32:22.429 PM WindowServer[654]   Created shield window 0x4 for display 0x04280480
8/20/14 1:32:22.429 PM WindowServer[654]   Created shield window 0x5 for display 0x003f003e
8/20/14 1:32:22.429 PM WindowServer[654]   Created shield window 0x6 for display 0x003f003d
8/20/14 1:32:22.431 PM WindowServer[654]   Display 0x04280480: GL mask 0x1; bounds (0, 0)[1920 x 1080], 30 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a012, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a0120000000004280480
8/20/14 1:32:22.431 PM WindowServer[654]   Display 0x003f003e: GL mask 0x4; bounds (2944, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
8/20/14 1:32:22.431 PM WindowServer[654]   Display 0x003f003d: GL mask 0x2; bounds (2945, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
8/20/14 1:32:22.431 PM WindowServer[654]   CGXPerformInitialDisplayConfiguration
8/20/14 1:32:22.431 PM WindowServer[654]     Display 0x04280480: MappedDisplay Unit 0; Vendor 0x610 Model 0xa012 S/N 0 Dimensions 18.70 x 10.51; online enabled built-in, Bounds (0,0)[1920 x 1080], Rotation 0, Resolution 1
8/20/14 1:32:22.431 PM WindowServer[654]     Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2944,0)[1 x 1], Rotation 0, Resolution 1
8/20/14 1:32:22.431 PM WindowServer[654]     Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2945,0)[1 x 1], Rotation 0, Resolution 1
8/20/14 1:32:22.522 PM WindowServer[654]   GLCompositor: GL renderer id 0x01022647, GL mask 0x00000007, accelerator 0x00003fab, unit 0, caps QEX|QGL|MIPMAP, vram 512 MB
8/20/14 1:32:22.527 PM WindowServer[654]   GLCompositor: GL renderer id 0x01022647, GL mask 0x00000007, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
8/20/14 1:32:22.530 PM loginwindow[653]    **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
8/20/14 1:32:22.557 PM WindowServer[654]   Created shield window 0x7 for display 0x04280480
8/20/14 1:32:22.557 PM WindowServer[654]   Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:32:22.609 PM launchctl[657] com.apple.findmymacmessenger: Already loaded
8/20/14 1:32:22.613 PM hidd[49]    CGSShutdownServerConnections: Detaching application from window server
8/20/14 1:32:22.613 PM hidd[49]    CGSDisplayServerShutdown: Detaching display subsystem from window server
8/20/14 1:32:22.621 PM com.apple.SecurityServer[15]    Session 100012 created
8/20/14 1:32:22.622 PM loginwindow[653]    Login Window Started Security Agent
8/20/14 1:32:22.666 PM com.apple.dock.extra[644]   Our bootstrap port disappeared out from under us: 0x1507 { urefs = 32774, rights = 0x1507: dead name }
8/20/14 1:32:22.667 PM com.apple.dock.extra[644]   Bug: 12F45: libxpc.dylib + 36100 [70BC645B-6952-3264-930C-C835010CCEF9]: 0x10000003
8/20/14 1:32:22.681 PM UserEventAgent[659] cannot find useragent 1102
8/20/14 1:32:22.686 PM com.apple.dock.extra[644]   Check-in to the service com.apple.imagent.desktop.auth failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
8/20/14 1:32:22.693 PM SecurityAgent[665] MacBuddy was run = 0
8/20/14 1:32:22.695 PM com.apple.dock.extra[644]   CGSGetNextEventRecord (Inline) connection 0xc917, 16384 bytes
8/20/14 1:32:22.695 PM com.apple.dock.extra[644]   CGSShutdownServerConnections: Detaching application from window server
8/20/14 1:32:22.695 PM com.apple.dock.extra[644]   CGSReleaseShmem : Cannot release shared memory
8/20/14 1:32:22.695 PM com.apple.dock.extra[644]   CGSDisplayServerShutdown: Detaching display subsystem from window server
8/20/14 1:32:22.696 PM com.apple.dock.extra[644]   Our bootstrap port disappeared out from under us: 0x1507 { urefs = 32774, rights = 0x1507: dead name }
8/20/14 1:32:22.696 PM com.apple.dock.extra[644]   Bug: 12F45: libxpc.dylib + 36100 [70BC645B-6952-3264-930C-C835010CCEF9]: 0x10000003
8/20/14 1:32:22.696 PM com.apple.dock.extra[644]   [Warning] Bad response from daemon for setup info
8/20/14 1:32:22.704 PM WindowServer[654]   MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04280480 device: 0x106d8d110 isBackBuffered: 1 numComp: 3 numDisp: 3
8/20/14 1:32:24.429 PM WindowServer[654]   **DMPROXY** (2) Found /System/Library/CoreServices/DMProxy'.
8/20/14 1:32:24.459 PM WindowServer[654]   Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:32:24.500 PM WindowServer[654]   Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:32:24.695 PM com.apple.dock.extra[644]   Our bootstrap port disappeared out from under us: 0x1507 { urefs = 32774, rights = 0x1507: dead name }
8/20/14 1:32:24.696 PM com.apple.dock.extra[644]   Bug: 12F45: libxpc.dylib + 36100 [70BC645B-6952-3264-930C-C835010CCEF9]: 0x10000003
8/20/14 1:32:24.696 PM com.apple.dock.extra[644]   [Warning] Bad response from daemon for setup info
8/20/14 1:32:40.928 PM com.apple.launchd[1]    (com.apple.dock.extra[644]) Exit timeout elapsed (20 seconds). Killing
8/20/14 1:32:40.928 PM coreservicesd[65]   SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=202
8/20/14 1:33:35.215 PM SecurityAgent[665] User info context values set for jsuny
8/20/14 1:33:35.297 PM SecurityAgent[665] Login Window login proceeding
8/20/14 1:33:36.387 PM loginwindow[653]    Login Window - Returned from Security Agent
8/20/14 1:33:36.000 PM kernel[0]   Sandbox: kcm(695) deny mach-lookup com.apple.networkd
8/20/14 1:33:36.453 PM loginwindow[653]    USER_PROCESS: 653 console
8/20/14 1:33:37.052 PM locationd[708] NOTICE,Location icon should now be in state 0
8/20/14 1:33:37.107 PM UserEventAgent[700] cannot find fw daemon port 1102
8/20/14 1:33:37.683 PM xpcd[611]   MiniLauncher[711]: registration request failed: (0x12, 0xd) process failed sandbox check
8/20/14 1:33:37.907 PM WindowServer[654]   **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
8/20/14 1:33:38.011 PM coreservicesd[65]   SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationReady to notificationID=237
8/20/14 1:33:38.114 PM WindowServer[654]   Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:33:38.395 PM imagent[737]    [Warning] Setting up a new messages database.
8/20/14 1:33:38.428 PM NetworkBrowserAgent[747]    Starting NetworkBrowserAgent
8/20/14 1:33:40.068 PM com.apple.time[700] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:33:40.069 PM com.apple.time[700] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:33:43.910 PM netbiosd[89]    name servers down?
8/20/14 1:33:56.635 PM netbiosd[89]    notify name "self.mdns.disconnection" has been registered 20 times - this may be a leak
8/20/14 1:33:56.639 PM netbiosd[89]    notify name "self.mdns.disconnection" has been registered 40 times - this may be a leak
8/20/14 1:34:49.927 PM netbiosd[89]    name servers down?
8/20/14 1:35:54.977 PM netbiosd[89]    name servers down?
USER LOG:
8/20/14 1:31:03.956 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.gamed) Ignored this key: UserName
8/20/14 1:31:03.956 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.gamed) Ignored this key: GroupName
8/20/14 1:31:03.957 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
8/20/14 1:31:03.961 PM loginwindow[44] Connection with distnoted server was invalidated
8/20/14 1:31:04.013 PM distnoted[549] # distnote server agent absolute time: 799.097924175   civil time: Wed Aug 20 13:31:04 2014   pid: 549 uid: 1467285364 root: no
8/20/14 1:31:08.954 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.afpstat-qfa[588]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
8/20/14 1:31:08.955 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.afpstat-qfa[588]) Job failed to exec(3) for weird reason: 2
8/20/14 1:31:08.958 PM com.apple.launchd.peruser.1467285364[536]   (com.google.keystone.user.agent[590]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
8/20/14 1:31:08.958 PM com.apple.launchd.peruser.1467285364[536]   (com.google.keystone.user.agent[590]) Job failed to exec(3) for weird reason: 2
8/20/14 1:31:12.394 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.mrt.uiagent[578]) Exited with code: 255
8/20/14 1:31:15.132 PM SystemUIServer[557] Could not load menu extra NSBundle </System/Library/CoreServices/Menu Extras/User.menu> (loaded) for Class AppleUser
8/20/14 1:32:20.642 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.quicklook[626]) Exited: Killed: 9
8/20/14 1:32:20.647 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.mdworker.single.08000000-0000-0000-0000-000000000000[641]) Exited: Killed: 9
8/20/14 1:32:20.647 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[635]) Exited: Killed: 9
8/20/14 1:32:20.783 PM Dock[556]   could not open iterator, -43, for directory <ECDirectory: 0x7fd8ac846970> {path=/Users/jsuny/Documents/} (directory changed)
8/20/14 1:32:20.783 PM Dock[556]   problem iterating directory, -43, for directory <ECDirectory: 0x7fd8ac846970> {path=/Users/jsuny/Documents/} (directory changed)
8/20/14 1:32:22.310 PM ARDAgent[574]   HIToolbox: received notification of WindowServer event port death.
8/20/14 1:32:22.311 PM ARDAgent[574]   port matched the WindowServer port created in BindCGSToRunLoop
8/20/14 1:32:22.694 PM com.apple.dock.extra[644]   HIToolbox: received notification of WindowServer event port death.
8/20/14 1:32:22.694 PM com.apple.dock.extra[644]   port matched the WindowServer port created in BindCGSToRunLoop
8/20/14 1:33:36.504 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.gamed) Ignored this key: UserName
8/20/14 1:33:36.504 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.gamed) Ignored this key: GroupName
8/20/14 1:33:36.505 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
8/20/14 1:33:36.517 PM loginwindow[653]    Connection with distnoted server was invalidated
8/20/14 1:33:37.429 PM MiniLauncher[711]   Skipping Setup Assistant for user 1467285364
8/20/14 1:33:37.464 PM transition[714] INFO: Not signed into MobileMe, nothing to do. Reason: 3
8/20/14 1:33:37.506 PM MiniLauncher[711]   INFO: MMAccountMgr_Private: finishedSetup called.
8/20/14 1:33:38.180 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.afpstat-qfa[744]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
8/20/14 1:33:38.180 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.afpstat-qfa[744]) Job failed to exec(3) for weird reason: 2
8/20/14 1:33:38.489 PM CalendarAgent[741] Could not find Meta Data for persistent Store
8/20/14 1:33:38.877 PM fontd[716] FontWorker failed to return directory info (IPC failure?) for file://localhost/Users/jsuny/Library/Fonts/
8/20/14 1:34:48.723 PM migCacheCleanup[719]    Cache cleanup: cleanup for user 1467285364 took 0.43 seconds
8/20/14 1:37:15.114 PM Dock[723]   no information back from LS about running process

Check these out:
http://images.apple.com/server/macosx/docs/UserManagementv10.5.mnl.pdf
http://clc.its.psu.edu/Labs/Mac/Resources/blastimageconfig/
 http://blog.macadmincorner.com/

Can´t see my Networks adapters in the Device manager!

Help!
I´m using Yoga 2 pro/windows 8.1
I can´t see the Networks adapter in the Device manager?!
(and no internet/WIFI connection is not working any more)
I´ve tried to install the latest Wireless Driver from lenovos homepage but it there is still problems. The laptop still can´t find any network adapter and the wifi connection doesn´t work, as it did last week!
Any one who has the same exeperience/or knew how to deal with these kind of issues?
/Rasmus

hi Rasmus,
Can you try these steps:
1. Check if you have a Network Controller entry in the Device Manager and follow this guide to get the hardware ID and on how identify the device.
2. If there's no Network Controller entry in the Device Manager, then it's possible that the Wi-Fi card might have been disabled.
Things to try:
- Boot into the BIOS either by pressing Fn+F2 on boot-up, the OneKey Recovery button, or via the UEFI Firmare Settings.
- In the BIOS, navigate to the Configuration tab and disable the Wireless setting hit Fn+F10 to Save and Exit then shut off the machine.
- Boot back into the BIOS and enable the Wireless setting then hit Fn+F10 to Save and Exit and observe if you can now detect wireless networks.
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Drivers won't load for core center or core cell?

When I log on as a powers user I get these pop up windows that say the drivers for the digi cell and digi core were not installed. I also get another pop up about this mother board not supported. But when I log on as administrator they all load no problems. I am running windows xp pro w\sp2 on a AMD64 3200 clawhammer, with a K8N Neo Platnum board. Any ideas why this would happen.Thanks for the help.

hi
The K8N nvidea forum is below this one, this is K8T Via board.
That forum would best answer this, as bios and settings are differant.
cheers
jocko

[solved] kmod, can't load nfnetlink module

Wireshark is busted for me because nfnetlink can't load for some reason. Also
modinfo /lib/modules/3.2.0-2-ARCH/kernel/net/netfilter/nfnetlink.ko.gz
was giving me a funky error, I went back to module-init-tools so I forgot what it said, but even modprobe nfnetlink wouldn't work for me.
Last edited by nfm (2012-01-08 23:37:05)

falconindy wrote:I really need to know what error you were seeing or else it can't be fixed. Please try to reproduce with kmod-3-5.
I was getting what @z0id got, "No such file or directory". With kmod 3-5 the issue appears to be fixed. Wireshark works and nfnetlink loads automatically.

Can't load drivers for Canon MP610 onto new iMac since loading Leopard

Hello, all you amazingly helpful folks.
Bought new iMac + Canon MP610 yesterday. Successfully installed printer on 3 Macs and a PC, and all was well.
Then--discovered that Leopard DVD was hiding in the box. So, installed Leopard uneventfully. Then--found that scanner wouldn't respond to any commands, and subsequently, I could no longer print from the new iMac ONLY (other Macs still printing fine).
So--I deleted all Canon printer-related folders on the new iMac, and tried to re-load the drivers from the Canon CD. MP Drivers won't load. Keep getting FAILURE message. Tried re-booting, unplugging, in all combinations. Printer still works from the other Macs. Maybe loading Leopard after the original MP610 installation confused things??
What to do next?
Also--NO DRIVERS available for MP610 on Canon web page.
Any assistance much appreciated!!!
Thank you.

You may have already done this so forgive me if you have, but I would try deleting the contents of the /Library/Printers/Canon/BJPrinters folder. I would then navigate to the /Library/Receipts and delete the Canon MP610 xxx.pkg file.
Then control-click on the Printers list in Print & fax and click on "Reset printing system..."
Then empty the Trash, unplug the MP610 USB and restart the iMac.
Then I would install the MP610 v6.91 OS X driver. I found it via the Canon Australia web site (http://www.canon.com.au/products/allin_one_printers/all_in_one_printers/mp610support.aspx).
Once the installation is complete, reconnect the MP610 to the iMac and wait. The printer should automatically appear in the Print & Fax application.
Also, in future, you should be posting this on the Leopard printing forum...

Can I change the HDD in my Elitebook 8540w to a SSD?

Hi
I've got a HDD that has started to make funny noises and I expect it to fail pretty soon. And while that is depressing in it's own right I feel I should do the best of the situation and and put in a fast SSD instead of the old thing. But before I go and buy the equipment I need to know that it can actually be done. I have read another thread on this forum about putting a SSD in the expansion slot (CD/DVD) but I want to replace the main HDD. So, my best guess is that it is possible but if there are any people here with experience, please guide me in how to proceed.
I have made a backup of all my important files so really the only thing I want to do is remove my old HDD and put a new one in and then install Windows 7 from the discs that followed with the computer.
Thank you very much for your time and help.
This question was solved.
View Solution.

Hi,
Nothing to stop you to replace an old HDD with a faster "modern" SSD. In theory you can use ANY SDD but on the safe side please use SSD from vendor(s) who guarantees its product will work such as the following vendor:
    http://www.crucial.com/eu/upgrade/HP+-+Compaq-memory/EliteBook/EliteBook+8540w+Mobile+Workstation+%2...
The upgrade process is very simple (I actually put one Crucial 960Gb to one of my machines today). My suggestion: before doing hardware stuff, backup all files/data and prepare for a "big bang" (in my case, I cloned my old HDD therefore very fast). Please read the following articles for more information:
    http://www.computershopper.com/laptops/howto/how-to-upgrade-your-laptop-s-hard-drive-to-a-solid-stat...
    http://lifehacker.com/5837543/how-to-migrate-to-a-solid-state-drive-without-reinstalling-windows
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

After upgrading to snow leopard my Epson printer drivers did not load and i get an error 'rasteroescpll failed'. I have tried reloading the driver to no effect. Can anyone help?

I have just upgraded to Snow Leopard and at the end of the upgrade the printer drivers failed to load. I have since updated them myself (Epson BX305) but still get an eror message 'rasteroescpll failed'. can anyone help?
I have an Imac previously running 5.8.0 and now running 6.3.0.
thank you
Hugh

The current driver version is 8.67.
Delete you printer.
Delete the folder /Library/Prnters/EPSON
Delete the folder /Library/Caches/Epson
Unplug your printer from your computer for 30 seconds and then plug it back in. You should be prompted to download the new drivers.
If all that fails, you can get the new drivers from Apple at http://support.apple.com/kb/DL1398

HT1338 I can't load driver for HP 6500A printer / scanner

I can't load driver for HP 6500A printer / scanner

What does that mean? Have you downloaded the drivers and to installed them? Have you tried adding the printer with the AirPrint Driver?

Why do we use only dynamic class loading for JDBC drivers

Hi,
My JDBC experience is that we always use dynamic class loader for drivers.
If we have a well defined package from a vendor, why do we use this dynamic class loading feature for drivers??

chandunitw wrote:
Hi,
My JDBC experience is that we always use dynamic class loader for drivers.
If we have a well defined package from a vendor, why do we use this dynamic class loading feature for drivers??Oftentimes, the driver class name is set in a configuration file, not in code. So the thing which processes the configuration file has no idea ahead of time which driver or drivers it will support, so it is not coded specifically for any. So it loads the driver by reflection, since it is given the class name as a string it can use with the reflection API.

I am using windows 7 and can't get the print drives to load for F2210 printer

I am using windows 7 and can't get the print drives to load for F2210 printer and I keep receiving different fatal error codes.

Hello @Imvertical
Welcome to the forums!
I read about how you're attempting to install your Deskjet F2210 on your Windows 7 system and receive Fatal Error codes. I will do my best to help and make some suggestions for you to try.
To being, try a standard copy from the unit to see if it will copy. If copies work, continue troubleshooting. If not, let me know what happened when you made a copy.
Next:
Perform a Level 3 uninstall.
There are 2 ways you can run the uninstall:
From Original installation CD:
1. Insert CD into drive, and then cancel the installer
2. Click Start and open 'Computer', and then right click on the CD drive and open
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
If software was downloaded and extracted to your system:
1. Click Start and type %temp% in the run field
2. Look for, and open the folder starting with 7z (Example: 7zS2356) (If there is more than one, choose the most recent folder)
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
Please let me know if the installation worked after the Level 3 uninstall.
Good luck and have a nice Wednesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Can't load drivers to t42. Using an IBM pre-load xp pro sp3 hard drive

Hello all
I am Charlie and new to the community and have 2379-rhu T42
I can not load the last 3 drivers to this T42 with an IBM pre-load HDD with xp pro sp3.
i have done all the windows updates and been to Think Advantage tool box---it just flags me the drivers are not loaded.
I went to the Lenovo site and the Intel site......no joy in mudville
i went through a lot of the t42 driver issues in the forum posts, but not solved my issues (or covered them all).
here is what i can gather from device manager and the net:
thinkpad PM device :
device instance id : ROOT\unknown\000
hardware id : *len0068
UNKNOWN DEVICE:
device instance ID: ACPI\ATM1100\4&61F3B4B&0
Hardware Ids: ACPI\ATM1100
Network Controller
Device instanc Id : PCI\VEN_8086&DEV_4224&SUBSYS_10108086&REV_05\4&39A85202&0&10F0
Hardware IdPCI\VEN_8086&DEV_4224&SUBSYS_10108086&REV_05s:
PCI\VEN_8086&DEV_4224&SUBSYS_10108086
PCI\VEN_8086&DEV_4224&CC_028000
PCI\VEN_8086&DEV_4224&CC_0280
GOOGLE showed me this is an
Intel(R) PRO/Wireless 2915ABG Network Connection
THANK YOU, for any and all assistance.
charlie

Hi Charlie,
I believe these three drivers should be what you need. Did you try to download and install any of these? If not try these and let us know if that works out fine or not.
Intel wireless driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62875
Atmel TPM (Trusted Platform Module) device driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-58054
ThinkPad Power Management driver for Windows:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4GXPEG
You can also use Lenovo system update to install and update your drivers without the need to download and install each one manually.
Lenovo system update for Windows XP:
http://www-307.ibm.com/pc/support/site.wss/MIGR-66956.html
-gan

Can we load data for all levels in ASO?

Hi All,
Im creating cube in ASO
can i load data for all levels in ASO
we can load data for all Levels In BSO but in ASO i need confirmation????
and one more
wat is the consider all levels option in ASO is used for ? wat is the purpose?
Can any one help ,it would be appriciate.
Thanks

In an ASO cube you can only load to level zero
The consider all levels if used for aggregation hints. It allows you to tell the aggregation optimizer to look at all levels when deciding if aggregation needs to be done on the dimension

HP EliteBook 8540w - drivers can't load for network adapters

Similar Messages

Maybe you are looking for