HP ENVY Rove 20 - Network Adapter not showing after Windows 10 Upgrade

After upgrading to Windows 10 the Network Adapter does not show up. Verified in Device Manager that there is no issue and the driver is there. Removed the device from device manager, attempted to use a different driver, still no success.

MrDimplz wrote:
Really disappointed in HP for not being ready for W10 rollout. I upgraded my HP Envy desktop PC 700-214 and after the upgrade, I could not connect to the internet. Didn't recognize the networking hardware. Went to HP Support (on different computer) and found out here aren't W10 drivers yet for this machine. Very Poor.My wife has a Dell laptop and we have another older Dell that upgraded no problem. Why because Dell is on top of their $__t when it comes to this stuff.Won't by HP again.Did you not try to reinstall the last support Drivers into Windows 10 to see if it works? Also with the lastest Windows HP will probably not support redoing drivers for older system as that will be cost prohibited to do. And it will be up to the Endusers to find the right drivers and software that matches their system to work with Windows 10 assuming they work with Windows 10. As to Dell that is something only Dell can answer that question and since we don't know if this is Dell Consumer or Business product since this falls outside of HP forums to discuss. You can't expect to have drivers if your system is too old to support Windows 10.

Similar Messages

Thunderbolt Network Adapter not working after yosemite upgrade

After I upgraded to Yosemite, my MBP Retina 13" doesn't see the link on thunderbolt network adapter. The wireless is totally unreliable and freeze every few min for 1-2 min which is long enough to disconnect any sessions. Turn off and on of wireless works and recovers but it's royal pain. Any suggestions?
I scheduled call with Apple 3 times today. They call me back at the scheduled time and immediately tell me that I missed their call even though I pickup on 1st ring. Been waiting in their support queue for more than 30 min now and no one is on line yet.

the link provide above leads to http://plugable.com/2014/10/31/os-x-10-10-yosemite-ethernet-adapter-problems-we- can-help
...but these seem to be all 3rd party USB ethernet adapters and nothing to do with the Thunderbolt adapter of the thread - or am I missing something?
I have the same blooming problem, it seems to be totally hit and miss whether the adapter works or not.
I thought is was a faulty adapter, so even bought a second one for my MacBook Pro, so a bit more profit for the most profitable company in the world for a non working device. My ethernet cable works fine to an old apple USB adapter but is 90% useless with Thunderbolt.
Renewing the DHCP lease occasionally works, but totally unreliable, at the moment it fails.
Still looking for a reliable solution.
Come on Apple, please sort this out, you have a connector policy of turning everything you can into adapters and dongles rather than building them in, so you end up with a slim laptop and a bag of adapters to carry around, and then when they don't even work - doubly annoying.

Virtual network adapter not showing as domain network

Hi
I've got a Windows 8.1 machine that is connected to a domain on the LAN.
Before I installed Hyper-V the network showed up as "Domain Network" in the network and sharing center but when I installed Hyper-V I created a virtual switch (external) and since then the network has shown up as "Private Network".
This is on the Windows 8.1 host and the machine has full access to the LAN and the Internet and is using the domain for logins and permissions, which allows me to browse file shares on other machines on the network without having to sign-on. Most of the
time I'm not even running any virtual machines on the PC, I have Hyper-V for testing websites on different versions of IE.
The only problems I have are the network type not being detected correctly, my local firewall blocking lots of stuff I run on it (due to the firewall rules all being set up for a domain network) and also when I RDC to another machine it refuses to use saved
credentials as it can't identify the machine (I don't know if this is related to the domain network problem).
Has anyone any suggestions what could be going wrong or how I can diagnose the problem?
Thanks

Hi Mog00,
Could you please run command "ipconfig /all " and post the information here .
Maybe you can try "Troubleshoot Problems" in "Network and Sharing Center" to diagnose and repair network problems .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Broadcom 802.11n Network Adapter not working on Windows 7 64bit

As the title suggests, my laptop (Alienware m17x) is installed with the Broadcom 802.11n Network Adapter and Windows 7 64bit Home Premium. I have had several other driver incompatibility issues with Windows 7, but those I have slowly been able to resolve. This however just cropped up after two months of successful use. Yesterday it started failing to connect to the internet, telling me that no wireless connections are available. I live in a dorm, and everyone else on my floor has successful wireless, including my Ipod Touch, PS3 and XBox 360. I called Alienware/Dell Support and we spent hours trying to fix the problem and all look well until I rebooted my laptop this morning and the same issue reappeared. When I reboot my laptop, all I get is a notification that no networks appear in range. If I uninstall the broadcom chip and let windows install it after a boot up it works until the machine is rebooted a second time. I have tried over a dozen windows 7 drivers for the chip, and about half a dozen vista drivers and they all have the same results, works on the first boot, fails every time after that

Just registered to say, on an Alienware M17x system as well running Windows 7 Ultimate, here is a link to a solution that worked exactly for me:
http://forum.notebookreview.com/alienware/436486-guide-properly-solve-wireless-connection-problems-m17x.html
All I did was section I.a. If the link is down, I copied the only section that I needed to follow out of this guide, in order to get my wireless to work repeatedly without having to uninstall the wireless driver every single reboot. Now it works perfectly,
already connected to a wireless network on startup.
I.a. Disable Device sleep on disconnect
Some newer Nvidia Ethernet drivers have a feature called Device sleep on disconnect. This is the culprit. Normally, it should only put the Ethernet adapter to sleep when the cable is disconnected, but it's buggy and thus kills the wireless connection as
well.
Follow these steps to disable this feature on your Nvidia Ethernet Adapter:
1. Open the Windows Device Manager by hitting Win+Pause, then click on Device Manager on the left side.
2. Double-click on Network adapters.
3. Double-click on NVIDIA nForce Networking Controller (yes, that's the wired Ethernet adapter indeed).
4. Click on the Advanced tab.
5. Select Device sleep on disconnect.
6. Set the Value to Disabled.
7. Click OK and wireless should work again (might require a reboot afterwards, but probably not).

Wrt610n wireless network does not work after firmeware upgrade

Hi
I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan. Any suggestions? maybe the firmware tosted the router?
Regards
Stefan

Update -
After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
Any thought what is going on - could it be that the other firmware had not loaded compleytle or?

ITunes Not Working After Windows Upgrade from Vista to 7

I recently upgraded a laptop from Vista to 7. iTunes 7.x was installed before the upgrade. As soon as Windows 7 was insatlled I upgraded to the lates version of iTunes(10.x). After the upgrade I had some issue where I was getting an error about artwork and iTunes would not open. I renamed the artwork folder to old and then I was able to get into iTunes. The next problem that I am running in to is that any time I click on a task such as find music iTunes stops responding and crashes. I've tried new config files, completely uninstalling and reinstalling, clean booting, etc. with no luck. Anyone have any suggestions?

I've been working on this issue for 2 days with no luck. Still looking for a solution if anyone has one. Thanks!

Windows Extensions Not Showing After Windows Intune Site Role Installed

Hi,
I have installed the windows intune site role on a SCCM 2012 R2 box and the Windows Intune Extensions have not been shipped to Admin>Overview> Cloud Services> Windows Intune as per the attached photo. This is the third time I have built a
SCCM MDM service and I have not come across this before. If you view the site roles it is installed, the subscription is active within config manager and the system authority is set to SCCM management in Http://manage.microsoft.com.
I am wondering if there is a way of breaking the intune association to try and re-install the role as there was not a full internet connectivity within the data centers at the time if install and external DNS was not resolving for FQDN and nslookup would
fail. I believe that Intune requires a cert to be shipped to it at time of install.
Any help, thoughts and advice would be greatly received as my previous 2 installs have not been an issue.
Thanks in advance,
Nick

I am in the same boat and have a call open. Apparently, there is some issue that the engineering team is working on. I got the iOS and Email Profile extensions back in February, but never received the 8.1 extensions. My call has been
running for 3 weeks now and they are still working on the delivery mechanism from their end. I'll post back when they figure out what is going on.
Best, Jacob I'm a PC.

Photoshop not working after windows upgrade

Could someone help me with the above issue...All the other Adobe products work fine...except photoshop

Those upgrades to Windows 2000 are tough.
Okay, in all seriousness, could you please provide some details?
What version, how did you upgrade, what failure or error are you seeing?
Details matter. Screen grabs could be very helpful.
-Noel

Network shares not showing up in finder osx Lion

The shares on my network are not showing after I tried this SMBup. I tried to follow this guide but things didn't turn up as I was expecting them to work.http://knowledgebase.hsti.com/re-installing-smb-on-mac-os-x-lion-10-7-x
This is the official website where in the middle of the page there is a note stating that "SMBUp installs Samba, which in turn replaces Apple’s OS X’s native netbios and SMB services. This means that while connecting to servers from the Finder remains functional, the Finder won’t be able to “browse” network services and servers from the network won’t show up in the Finder’s sidebar. Be advised."http://eduo.info/apps/smbup
So i uninstall the samba restart the machine and now my shares don't show in the left side pane of finder. How can I get them back. Is the netbios service disabled

Open Terminal and issue the following command
ps aux | grep netbios[d]
if you get a line similar to this
_netbios 45 0,0 0,0 2477156 2456 ?? SNs 9:14am 0:02.44 /usr/sbin/netbiosd
then the daemon is running, otherwise issue the following command to start netbiosd permanently
sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.netbiosd.plist

Report not show after submit query in parameter form

Hi, anubody can help me with this
report not show after click submit query button in parameter form

To help you see what is happening, temporarily add DESNAME to your parameter screen. Make sure that DESNAME on the parameter screen has a value before you click the Submit Query button.
If you are running the report with a local report service (running on your workstation), the value of desname should be the name of your default printer.
If you are running the report on a network application server based report service you need to specify the name of a printer that is accessible to the server on which the report service is running. Make sure that it is specified in a way that the server can recognize it, e.g. \\printserver_01\HPLaserJ4210.
Maybe this will help some.
James K.

Wireless network connection not showing up in network connections

Hi, Experts,
I recently re-image my Toshiba laptop (using window xp installation disk) due to I deleted few system files accidentally and can not boot the system up.
Before I re-image, I have no problem to connect Fios internet. After the re-image, the wireless network connection not showing up in network connections, so I cannot set up my Fios internet.
How to set up the wireless network connection that it will show up in network connections? Thank you very much for your help.

Issue Resolved. I did not turn on the wireless switch.

Adding shared printers? Network printer not showing up in list

I have a network printer not showing up in the Bonjour Printer Wizard. There is not a place to add a printer to this list. Does my network printer need to be installed under the Windows side as well, or can I share it using Bonjour? I'm confused as to how the shared printer program works. Also, my Adobe "print to pdf" option shows up as a printer, but how do I change the file destination location? It doesn't give me an option to change the "saved to" location. I am using these printers through Parallels in AutoCad, and that should be the only reason I will need to share printers. But I am in AutoCad a good deal of time, so I need to know how to quickly print my drawings.

Welcome to the forums!
You don't say if you installed after downloading the Printer you deleted, but I suspect it's one not showing, and that you need to reinstall.

Why is it my network does not show up any longer on wifi for ipad? Have tried network reset still not tere cannot go to internet

have tried network reset but my network is not showing cnnot access internet.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Ort Express- my network suddenly not showing up. System preferences, advanced/network shows network. Opened Airport Utility options grayed out except configure other but no luck. No set up assistant option to reenter. Not sure where to go from here?.

Airport Express.
My network suddenly not showing up. Openend system preferences/Network & my network is there. When I open Airport Utility, most option are grayed out except "configure other" with no change. Utility does not provide option for setup assistant where I could just start over. So no wifi without network set up and can't use ethernet/router to troubleshoot. I am stuck any assistance helpful.

So I went back to the PC after my original post, and somehow I was able to connect to the AirPort wireless network in the Windows Wireless Network List. Once I did this, it showed up in the AirPort Utility, and I was able to access the internet. I have no idea what fixed the problem, but maybe it was simply a matter of waiting a few minutes before connecting to the network?

In web console Attestation menu item not showing,after OIM 9.1.0.1 install

In web console Attestationmenu item not showing,after OIM 9.1.0.1 installation
Version: 9.1.0.1860.16
Build 1860.16
thanks.

Choose option Oracle Identity Manager with Audit and Compliance Module during installation.
INIYA.

HP ENVY Rove 20 - Network Adapter not showing after Windows 10 Upgrade

Similar Messages

Maybe you are looking for