HP Headphone jack with digital output

OK, so HP customer service is officially garbage. Everyone knows that, i just had to get it out of the way before anybody responds "Just ask customer service". I have a HP Pavillion dv6724ca notebook with 2 headphone jacks. I heard that one of them is a digital output jack for 5.1 surround and my sound card specs say that i have digital output capabilites (go DXDIAG.exe - Realtek Digital Output), but I cant get it working. I have a 3.5mm mini TOSLINK to TOSLINK connected, i have enabled my digital output in Realtek HD Audio Manager, i have checked the supported formats in my Realtek Digital Output properties.....but still nothing. Am i missing something?
thanx

I don't think your model HAS the headphone/mini-toslink SPDIF jack, RE: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443331&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US... . The HDMI port is SUPPOSE to support BOTH digital Video AND Audio... however I BELIEVE that there was/is some problems with the Audio side on some HP models. BUT to be sure however, use the search facility to search on HDMI. If everything is working according to spec (on the PC AND on your >>>TV<<< ), you should ONLY need a single HDMI cable to do what you want ... but I fear you are going to run into problems. Report back your findings.
Good Luck.

Similar Messages

Help with DIgital Output Array with 6062E DAQ CARD...

Good morning, folks... I need some help with digital output of the 6062E PCMCIA card... I can output 1 line without problems... I need to control a 4066 with my digital outputs... I am doing this without greater problems... but there's something... I need that when one of my outputs is high, the others become low, unchangeably... so I tried to use an array to control my output and I couldn't do that... some errors showed up... can you help me please? Maybe there's any errors at my software, then I thank you if you help me... the vi is anexed...
Best Regards...
Attachments:
Untitled 3.vi ‏20 KB

See below for one of many methods. Change the "lines" string for your setup.
Also, please explore the Examples that ship with LabVIEW, and read your card's manual.
Richard

Cannot output audio via headphone jacks with Mac Mini (2012) and Boot Camp

Hi all,
I have a brand new (2012) Mac Mini with a Boot Camp partition running Windows 7. It's connected directly to an HDTV via HDMI cable. I have external speakers hooked through the headphone jack on the back. The speakers work fine if I'm in the Mac environment, but I cannot get the audio output to go through the headphone jack while in Boot Camp/Windows- it will only go through the speakers on the TV. Any suggestions? I think I've downloaded every driver I can think of, and the installation of Windows on the Boot Camp partition went well otherwise. Thanks.
John

Nevermind, I was missing one driver. Installed it, fixed.

Problem with digital output and microph

Hello! I recently bought a new motherboard MSI K8N SLI Platinum that have onboard Sounblaster Li've 24bit, with coaxial and spdif and also the standard outputs. I ve connected via a fiber optical cable to my amplifier and i checked the digital output only box to the advanced settings on the mixer. I am hearing sound very well from my amplifier but when i connect headphones to with microphone to my soundcard , i don't hear anything at all from my headphones. Also i cannot speak via microphone. If i uncheck the box digital output only i hear sound from my headphones and also i can speak to microphone. Is there some way to have them both enabled? In my previous motherboard i didn't have that problem. I could hear sound from my amplifier with pcm signal and from my headphones and microphone analog at the same time.
Thanks!

Thibaud,
The clue is here: " i take acquisition with one sample on demand."
You are apparently using software timed output. To maintain accurate phasing at 80 Hz you need timing which is accurate to better than 4 milliseconds. This is not likely to occur with a desktop operating system. Sometimes it will be good and other times OS latencies will throw the timing way off.
If your board supports it, use hardware timing. The timebase sources on most boards are far more precise and accurate than software timing.
Lynn

Trying to separate headphone jacks to seperate outputs

Hello i got a dv7 laptop with beats audio, i bought it to dj with cause of the 2 headphone jacks and superior sound card.. anyways i use ultra mixer 3, i plug my pa system into one jack and my head phones to sample and cue tracks.. the problem im having is i can seperate the outputs, but instead of going to headphones it goes to the internal speakers instead.. how do i fix this, Oh its not my dj program either...

The WLC SFP port will negotiate to only 1Gb and nothing less. You'll need a GLC-TX module to enable to connect an ethernet cable from the Linksys to WLC.
Configuration Guides

USB-6009 pulse train generation with digital output....

Hello!
I've bought a new USB NI-Card (USB-6009) and now I'm trying to adopt an old vi that uses traditional DAQ drivers. I wrote that vi for a PCI NI-Card (PCI-6024E), which has two counters to generate two pulse trains simultaneously. Now I've only one counter and that's why I'm searching for a good way to create pulse trains using a digital output! The pulse trains are both ranging between 100 Hz and 100 kHz.
I'm sure somebody has an idea how I can solve the probem in the best way
Kind regards,
Peter

You can't do it with this low cost board. Both digital and analog outputs are software timed only. The analog out is rated at only 150 samples/sec and the digital is about the same. You can't even use one of the counters because it is not a hardware timed counter output. It is an event counter only as an input.

Using Headphone Jack with Multiple Displays with Mavericks

I recently installed Mavericks on a 2011 Mac Mini (previously was running 10.6.8); the Mac Mini is connected via HDMI to my HDTV in my living room and connected via mini display to HDMI to a second HDTV in my basement. I am running an extended USB cable to the basement to have a keyboard/mouse at each HDTV (living room is using a Bluetooth keyboard/trackpad).
After I installed Mavericks, I was immediatley having problems with my monitors. Each monitor showed up in my audio settings, but for some reason, I could not select the living room HDTV for sound, it just bounced off the HDTV name and went to another selection. After analyzing it for a while, I determined that when I had a line into my headphone jack, I could not select that living room monitor. As soon as I removed that line, I could select it (as an fyi, the other HDTV in the basement worked fine for sound with the headphone jack being used). I would prefer to be able to use the headphone jack as I have that plugged into my home theater system to play sound through my sound system.
Also, whenever I reboot my Mac Mini, my extended cable USB keyboard/mouse becomes unusuable and I have to unplug the keyboard & mouse and plug them back in for them to work and recognize the keyboard/mouse. The USB maintains power as I plugged my iPhone into it and got a charge after a reboot of my Mac Mini, it just doesn't automatically pickup the keyboard/mouse. Everything worked perfectly in 10.6.8, so any solution(s) would be welcomed so I don't have to go back to that OS.
Thanks.

Actually, there is an adapter that will do exactly what you want:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=6B2 FAAD2&fnode=home/shopiphone/iphoneaccessories/headsets&nplm=TN544LL/A
If you read one guy's experience, he says:
"I can even use it to connect to the auxiliary jack of my car stereo so the call goes through the car speakers and I use the adapter's microphone to speak. "
So this ought to do ya. (And, of course, the iPhone music will indeed pause when the call comes in -- this happens even if you are using "normal" headphones).

Digital stimulus-frequency response: Need to drive with digital output trigger. Using counters for response.

I need to drive stimulus-response with a software driven digital trigger and NI-TIO counter based response. No analog I/O is really relevant, although I have a PCI-6035E multi-function DAQ as part of my gear. I intend to use the analog, but its timing is non-critical and can be software timed.
The real trick is that I want to set the basic timing of the system (in the range of 1 - 50Hz) from the timer0 on the 6035E. This signal needs to be replicated to drive a trigger pulse and to route through RTSI (or a PFI) to trigger frequency counts using the four possible groups of counter/timers on the 6602.
What I need is:
while( enabled )
Repeat at (
software controllable rate = 1-50Hz)
Trigger Sets a PFI line for 10-20us
same trigger sets an RTSI line
- Software Set Delay (usually zero)- stable is more important than the delay time!
Count for software set time on 4 counters
analog samples
Post-process
I want to do this in LabView. I have checked out the Advanced sychronization demos online, but the examples all use analog triggering and buffered digital I/O. This doesn't really address what I need to do.
I have made some failed attempts which relied on software to sync up the trigger and the response frequency acquisition. This is definately flawed. I need to start the counting right after setting the digital output trigger, and stop the count after a fixed interval for frequency calculation.
I am having trouble working through the signal routing to get the timing to trigger off the digital stimulus output pulse.
Any help would be appreciated
Thanks,
Joe

Joe
What are you using the trigger from the 6035E for? I do not know what you mean by, "to trigger frequency countes."
If you are having problems just routing the signal to the 6602, here is a vi that shows you how to route a signal through the RTSI cable to use as the source of a counter.
Brian
Attachments:
Route_RTSI_to_Source.vi ‏67 KB

Trouble with Digital output on Live Value under Windows

I have a soundblaster li've value card in my system using the digital output in win98se and all works fine. I just upgraded to WinXP. The windows drivers worked fine once i switched them to digital output. However, i lost the Creative mixer and wanted it back. I then downloaded your Unipack driver for the Li've card for winXP and lost the digital output even when i toggled to digital output control. I then downloaded the li've value from the Gateway site since they OEM'd the card in my system and the digital is working again. However, they do not provide the Creative mixer. Is there anyway I can get the Creative Mixer to work in XP wiith the li've value card? Thanks
Soundblaster FAQ states:
Some name brand systems shipped with a special Li've! Value card that was made to work with digital speakers. If you system shipped with a Li've! Value and you have digital speakers you will need to use drivers provided by your system manufacturer. If you use the drivers on the Creative website your card will no longer work with your digital speakers.
Boston Acoustic Digital Speakers or Prebuilt System With a Digital Li've! Card
If you have a set of Boston Acoustic digital speakers that came with your system and they are not working with your sound card, make sure you have it connected to the digital out on the card. Also make sure that the digital out is enabled.

I still always get the value 0.0 returned for minA. I
know that the data is being correctly stored because I
have a seperate report frame that displays all values
for all entries.
Any ideas where the flaw is?
Thanks!
Hey, there. It's unlikely that your users are entering negative numbers which are the only numbers that will be less than zero. You need to initialize your minA to be some quite large number.

PID with digital output

Hi,
I have the application.
I do not clear about PID function but, I would like to ask you about my application.
I have a sensor water level and a few motors to control gates
I measure water level and control motor via digital output(using the fieldpoint system)
I would like to hold water level at level, so I use PV indicator and SV control. when I change SV then will control Motor (RW or FW motor).
Can we use how technology to hold water level PV=SV ?.
Please let me know your comments.
Thanks
Nguyen Van Hung

Hi Nguyen,
There are several examples in CVI under Help » Find Examples that may be able to help speed up the development of your PID program (assuming you have purchased the CVI PID Toolkit). These examples can be found by going to Toolkits and Modules » PID and Fuzzy Logic Control » PID. Depending on how familiar you are with PID algorithms, I might suggest that you look at the GeneralPid example first. Additionally, the PID Control Toolkit User Manual t is also a great place to look at the algorithms and the library functions. Finally, in case you aren't aware, you can double click on any function that you find in the Libraries folder located in the bottom left of CVI to open a functions panel which will show all inputs and outputs of a given function. Then, you can right click on any parameter to view details about that or on the function panel (outside an input box) for more information about the function in general.
I hope these resources help you design an algorithm that works well for your situation!
Regards,
Trey C.
Applications Engineer
National Instruments

Left Audio Only From Headphones Jack With External Speakers

Yes, the balance is set properly under the sound system preferences.
So here's the problem, I have JBL Encounter speakers connected via the headphone jack and since yesterday only the left speaker produces sound.
I've plugged my ipod into the JBL speakers and they work fine. I've also used headphones with my computer and again, left audio only.
I've even switched the right and left satellite speakers and again only left audio is produced... though on the right (side) satellite.
Any thoughts on how to correct this? The nearest apple store is 2 and 1/2 hours away so I'd prefer not to go if there is another fix.
My three month phone service is up but I'm still covered under the apple care for a few more months.
Thanks in advance.

Sounds as if your headphone jack is either defective or has been damaged by having a cord yanked at some stage, Kanji
It is either a trip to your nearest AASP or a mailing box from Apple to get it resolved. Applecare will cover it if the problem isn't due to accidental damage (though a cat tripping on the cord can be enough to produce such results and the price could accordingly be substantial as the port is mounted on the logicboard on recent MBPs as I understand it) .
You might want to try a regular pair of headphones in the socket to make sure the problem also occurs with them, too, though.
Cheers
Rod

No sound from headphone jack with Windows 8.1 (Hp Envy 15)

Hello all, I have an Envy 15 3040nr and I did a clean install of microsoft latest Windows 8.1 version plus all drivers. Everythink works BUT the headphone jacks. I had windows 8 before and everything worked.
Once I plug a headphone in either jack (envy 15 has 2) the speakers stop as expected but I get no sound in the headphone. I tested two headphones that work just fine on my phone and other computer.
I also checked if it was a hardware problem but it isn't. I boot with Ubuntu and both headphone jacks works perfectly.
I installed several (at least 6) driver versions searching the forum but even when I get the speakers working the headphone jacks never works.
Please help!

Hello ArthurSilva,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
You stated that you are able to get the speakers working, but you have been unable to get the headphones to work. I would like you to get your speakers so they are working and then try the steps I have outlined below to get the headphones working afterwards:
Step 1. Go to the Tiles menu and type "Troubleshooting"
Step 2. Click on Troubleshooting
Step 3. Click on Troubleshoot audio playback in Hardware and Sound option
Step 4. Click Next
Step 5. Choose Headphones and Windows will automatically detect the problem
Step 6. Click on "Apply, fix" button
This should resolve your headphones issue with Windows 8.1. If it does not please re-post for further steps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

No Sound Output with Digital Output Mac

Hi There,
I normally use my Blackmagic card for sound output on my Mac with Premiere CS6. I want to work with the digital output on my current project but when I try switching to digital out under Preferences>Audio Hardware the audio still comes out of the Blackmagic card but not the digital audio out on the Mac. I'm testing with the bars and tone in the browser and my timeline sequence. FCP 7 works as expected when digital out is selected, and I know digital out is working properly on my computer.
Any suggestions?
Thanks!
Gerry

OK, sorry it was that I had to switch audio device under plackback.
Perhaps this should be added to the FAQ under No Sound During Playback, which doesn't include the Preferences>Playback as part of the troubleshooting for MAC.
Thanks!
Gerry

Help with Digital Output software

Hey people. I need your help to improve my software. I need to use some digital outputs. The software does this:
- Choose which one battery to monitor
- Activate only one digital output at a time
Ok, I have done this, but I guess it's not the best solution. I've tried to make it a lot of different ways, mainly because I am using the VI's several times and it is not an "optimal code". Well, beyond that, I can't have two digital outputs HIGH at the same time, i mean, I CAN'T have LINE2 and LINE3, for example, at HIGH (true) at the same time.
Does anybody have any idea on how to help me?
Thank you very much!
Attachments:
Medidor Bateria.vi ‏65 KB

Thank you very much, Jeff. I know my solution is not the best, but I need to ensure that only one of my outputs be at HIGH level. I am trying to use the RADIO buttons, and the program is attached here. But there is this problem, that is I repeat all the VI's. Please check this for me, if you can. Thank you very much, your help is very important!
Attachments:
Medidor com Radio.vi ‏28 KB

Synchronous LED display with digital output

hi,
In the experiment I want to control a relay, so I use the MAX to generate a digital output task and then transfer it to example code in labview as below. How can I amend this code so that when the module ouput 1 there is a synchronous LED display on the front board.
Thanks~~~

Use single sample digital writes inside your loop. Use a shift register to hold the state (T or F) and invert each iteration. Now you can just wire the state wire to a front panel led and be sure that it is sync'd to the digital output.

HP Headphone jack with digital output

Similar Messages

Maybe you are looking for