HP L7780 All-In-One Error Code 83C00009

I have an HP L7780 All-In-One.  A few days ago it started printing mirror image and I had to change it back to normal with each print job.  Then today, I tried to use it and the printer is "locked up"  The message 83C00009 is on the screen.  I have tried all of the resets such as #3, #6 and #9 to no avail.

I had the same error and I just did the following and it reset the printer back to defaults and things are working once again.
1) Turn printer off (pull power cord)
2) Press Cancel button on top of printer
3) Turn power back on (plug in power connector)
4) Keep pressing Cancel button untill it looks like it reset
If that doesn't work let go of the Cancel button, re-press the Cancel button and press the power button on top.  Keep holding down the Cancel button until it looks like it reset itself.
I hope this helps.

Similar Messages

  • L7780 All in One - Windows 7 Clean Install - Error when printing

    I have a huge problem with a failry new L7780 all in one. I has stopped printing from my laptop. I recently upgraded to Windows 7 with a clean install from Vista....ergo I formated the disk and then reinstalled Windows 7 . And, now every time I print I get the following message "the job has failed due to an error on the printing system"
    The printer is selected as default.
    The printer does connect through wireless onto my network , and does appear on my PC as connected. However, once I press print after a few seconds it seems to disappear.
    I have not altered any network settings and MAC address is off on my router. It was working fine on 2 Home pc's running XP, worked great with Vista. And its only this one Laptop with Windows 7 that can't print to it for some reason.
    However, sometimes when I have shutdown...all of a sudden it prints out what I asked it to 30 minutes ago.
    I have tried installed and re-installing drivers.
    I have tried forced start ups .
    Switching it off at the mains.
    Resetting the network adpater.
    I can only think at this stage there is a compatibility issue with Windows 7.
    Any clues? Any help anyone can offer.
    Cheers,
    Steve
    This question was solved.
    View Solution.

    If this sounds like your issue:
    After installing the product on a network, you turn the computer off, and then on, and the product loses functionality. The product no longer prints and the product icon disappears from the Devices and Printers menu in Windows 7 (64-bit).
    Try this fix:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89191-1&lc=en&dlc=en&cc=us&...=
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • HP Officejet Pro L7780 All-in-One Will Not Print Blue Ink - It Prints Pink Instead

    HP Officejet Pro L7780 All-in-One -
    Issue:
    Blue ink will not print (It prints the color pink instead.).
    Actions taken:
    1.  Cleaned ink heads.
    2.  Replaced ink cartrige.
    3.  Reinstalled software.
    Sugestions by HP customer service:
    Purchase a new printer: Because the issue is software related - not reading the blue ink cartrige.
    Any suggestions or advice would be very much appreciated.
    Thank you for your time!
    Thank you.
    Sincerely,
    Ryan

    The cyan portion of the printhead may be clogged.  I would suggest running the diagnostics shown here.  If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • On a HP Officejet Pro L7780 All-in-One printer, is there a toner and where is it?

    On a HP Officejet Pro L7780 All-in-One printer, is there a toner and where is it located? I've looked in Products and Supplies and don't see it but my printer is saying that it's low or empty.

    By now, you have probably discovered that the L7780 does not use a toner but cartridges.  It actually uses 4 HP 88's.  They are black, magenta, yellow and cyan.  Usually, black is the first to be replaced.  They can be found at Staples, Office Depot and Best Buy.

  • HP Officejet Pro L7780 All-In-One printer

    I am running Windows 8.1
    The printer status OFFLINE.
    It has done this in the past and I have been able to correct it by deleting and reinstalling it (at least back when I was running Windows XP and 7.  Possibly at that time it was the DHCP issue pointed out in a previous post.
    Now however, I can remove it and when I add it back, using Control Panel, Devices and Printers, Add a Printer,  it is recognized correctly on the network (shows the IP address I know is in the printer) but when I try to send a test page, I get a pop-up saying it is OFFLINE.  When I status it, it confirms it is offline.
    There is no indication at the printers display that it is offline and it shows it is communicating with the network.

    I can’t give you more than the info in my question about the model of the printer-HP Officejet Pro L7780 All-in-One printer
    I had been using this printer for several years and this has happened a few times in that it required me to delete it and reinstall—that just does not work now. This last time was after I had upgraded to Windows 8.1 however I did that several weeks ago and it has worked okay since then…this is the first time it has stopped working on 8.1 however
    Running Windows 8.1
    I tried connecting via wireless and also switched over to wired lan but got same results (Printer Unavailable)
    Used DHCP but get the same with static ip address
    Cisco Lynksys E4200 wireless router
    Just ultimately get Printer Unavailable when I try to print or status the printer
    When I try wireless, I see the wireless icon bright blue like I expect it to

  • HP Officejet Pro L7780 All-in-One Printer & Verizon D-Link wireless router. will not connect

    I have a HP Officejet Pro L7780 All-in-one and not able to get it to connect to my Wireless  Verizon D-Link Router.
    Please advise.
    aileensnider

    Let's start here.
    Printer does not maintain wireless connection.  
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&tmp_task=solveCategory&cc=us&dlc=en&la...
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro.  I have downloaded all the drivers and it has passed all the tests.  Every time I try to fax it shows the job paused.

    I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro.  I have downloaded all the drivers and it has passed all the tests.  Every time I try to fax it shows the job paused.  I can manually send and receive faxes but I can not do it through the computer. 

    Try deleting the printer, deleting the job queue and reinstalling the printer again.

  • Hp Office jet pro L7780 all in one printer - error C00E0001

    I started getting a notice that said: you have a problem with your cartridges, it showed all colors.  Then as I took the cartridges in and out, I got an error code COOEOOO1 which directed me to: turn power off then on again, which I did many times.  This has never worked.  I have pulled up the "hardware diagnostic" which said I have a connectivity issue.  I checked the cables, they were plugged in.  I disconnected them and tried the wireless but that got the same error.  Help!  My computer is a window xp

    HI RODA80,
    Welcome to the HP support forums.  I understand that when you are printing a multiple page document on your Officejet Pro 8500a that only the first 2 pages print.
    To better understand the issue would you please provide some further information:
    1)    What operating system are you using (Windows 7, Mac 10.8, or Windows 8, etc)?
    2)    Is this happening for all multiple page documents or just one?
    3)    Has a default of only printing the first 2 pages been accidentally set?
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Officejet 4622 all in one error status

    My officejet 4622 all in one, using windows 8 os, has totally stopped printing anything but test pages. Had the blue light flasing for a week saying it was offline ~ solved that problem, but now all I get is "status: error". Have checked all connections, rebooted wireless router, used every tool available on the printer, absolutely will not print. Don't want to replace it, but I will if I can't get it printing again. Help

    Hi @1oldgoat 
    I see you are having some difficulty with your 4622. There are a few things we can check. First, do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause.   Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
    In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
    ^ This is not limited to Laserjet printers.
    Also, make sure you have the latest firmware update. This firmware update can improve printer performance and fix miscellaneous defects.
    OJ4620_R1424A.exe
    Finally, running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
    Connectivity:
    USB: Verifies that the USB connection from your computer to the HP product is working correctly.
    Network: Verifies that the network connection between your computer and your network is working correctly.
    Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
    Driver Check: Checks for missing or corrupt driver files.
    Device Manager: Checks for problems in Device Manager that would prevent printing.
    Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
    Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
    Port Match: Checks the port settings for the HP product.
    Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
    Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
    Print Settings: Checks and adjusts the print quality settings.
    Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
    Scan Tests: Checks the scan mechanism, drivers, and registry entries.
    Source:Try the HP Print and Scan Doctor for Windows
    Click here to download and run the Print and Scan Doctor> www.hp.com/go/tools
    If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
    If you see only green check marks (), the tool did not find any problems.
    If you see green wrenches (), the utility identified an issue and corrected it automatically.
    If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
    If you see a red X (), follow the on-screen instructions to resolve the issue.
    I look forward to hearing back from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP C7280 All in One Error B042EBCC

    My Photosmart Express HP C7280 All in one printer was all flashing lights last night. It would not power off with the power button, so I unplugged it. Now when I plug it back in it immediately shows "B042EBCC" on a blue screen and goes no further. There is also a little blue flashing light under the camera picture next to the slots for the photo memory cards. Any help with resolving this and getting me back to printing will be greatly appreciated.  Jere' in MS.

    I recently had the same problem with an HP Photosmart C7280, the same model as yours. I eventually managed to get through to HP Technical Support, and they advised that the unit would have to be replaced.
    Before calling technical support, I tried all the steps that have been recommended in various posts (the printer reset with *6, removing/reinserting ink cartridges, using a different power outlet in my house, etc), but nothing helped. To the best of my knowledge - and I really tried to get my printer working - the unit is dead.
    (Although this is an old post, I came across it when trying to fix the same issue. So, hopefully this will help anyone else who stumbles upon this post. Some other codes my printer showed on the HP "blue screen of death" were B83FCB56, B0075110 and B02BAEC3.)
    Regards
    Tim

  • Deskjet 2542 all in one error: 'the specified module could not be found' when installing to USB

    Installation proceeds OK until the USB cable is connected, when the error message is displayed and installation ceases.
    I have successfully istalled and run the printer on another XP PC of a similar age - ie old.
    I have upgraded the XP OS to SP3 with numerous updates;
    Checked that the USB ports read Data sticks OK;
    run a/v and malware programs, including Microsoft Safety Scanner;
    checked that USB drivers are up to date;
    uninstalled driver software and re-installed with software downloaded from HP;
    carried out the procedures detailed in HP Support Forum 4022116
    Error message the same.  
    This is for my elderly neighbour - help please!
    This question was solved.
    View Solution.

    Hi @bodger50,
    Welcome to the HP Forums! 
    I understand that your HP Deskjet 2542 gives you the error: 'the specified module could not be found' when installing to USB, on Windows XP.
    I would recommend going through the steps in this post, Re: Install Error "The system cannot find the file specified" (hpzprl40.exe). When you get to the printer install wizard section, just use the full feature software and drivers found at this website, HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers. As the printer install wizard is only for Windows 7 and up.
    Hope this is helpful, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Photosmart C4580 All-In-One - Error Message: Print Cartridge(s) missing or not detected

    Hi
    I have recently encountered a problem with my printer.
    I went to print a document and the following error message was displayed on the printer "Print Cartridge(s) missing or not detected", and the document would not print.
    I am unsure as to why this message was displayed as I had not changed anything to do with the printer.
    The cartridges that were in the printer had been in the printer since October so I thought that it could be due to the cartridges needing to be replaced, therefore, I changed the black ink cartridge. Once the cartridge had been replaced the error message disappeared and the document printed.
    However, I went to print another document shortly after and the error message reappeared and the document would not print.
    Due to the fact that changing the black cartridge cleared the error message, I replaced the colour cartridge, however, this did not cure the error message this time.
    I have followed all of the advice on the HP support pages about cleaning the contacts etc, however, it has not worked. I have also contacted the support team by Email, but have had no reply.
    Does anyone know how to cure the problem, or if in fact it can be cured. I am a university student and desperately need the use of my printer, so any help would be appreciated.

    Hi
    Yes it did get resolved in the end.
    It seems that the fault came from using remanufactured or re-filled cartridges.
    I had to replace both of the cartridges so that they were genuine HP cartridges.
    Originally I only replaced the one that was causing the problem, but in the end I had to replace both of them. This then resolved the problem immediately.
    I hope this helps.
    If not, I would advise contacting the HP support team as when they finally replied to my email they were very helpful and quick to reply to queries and offer advice and suggestions.

  • Fireworks from old Mac to a new one, error code 150:30

    I bought a new Macbook Pro, after transferring all my programs, Fireworks will not open, the below error appears, I have re-started my computer a few times to no avail, any help?

    Moving a library: Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its sub-folders and files) intact to the other drive.  Hold down the option (alt) key (shift on Windows) and open iTunes.  At the prompt to create or choose a library choose the copied iTunes folder.
    If this is to a new computer and you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music  then you don't even need to start with the option key held down, iTunes will automatically look for it there.  (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)

  • HP Officejet Pro L7780 All N One and Eprinting

    Can anyone please tell me How to find my claim code on this thing?  I clicked on Setup and I dont have web or eprint as an option.  I dont understand it and need some help please.

    Hi,
    The HP Officejet L7780 does not support any wen services as ePrint, but only later products provide such functionality.
    You may may find that information listed within the chart below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02814760&lc=en&cc=us&dlc=en&product=3752459#N26...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP 6210 All in one-- Error: 0xb9000002 165:hw_interrupt

    What is this error ?   I tried shutting off the printer -- I cannot clear the message -- all the light are blinking --
    Can you help?

    Liisa,
    This article covers alphanumeric errors should help resolve the error you are getting:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
    Give the steps a try and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Maybe you are looking for

  • History is not working in Firefox 3.6.11 it is blank. Private browsing is not set.

    History is not working in Firefox 3.6.11 it is blank and does not create any new history. Private browsing is not set.

  • Audigy 4 platinum pro Microphone im

    Simple one here, i'm just about to buy some leads to connect my condensor mic to my external hub. I just bought a preamp, yet don't have all the leads for it to work. Will a 'balanced /4" TRS connector' fit into the 'Mic imput'/'line-in' of my Audigy

  • Help with P6N Diamond X-Fi drivers

    Ok, even though we have a fair share of threads with problems with this on board sound, im sure some of you must have it working correct. So if you do, please tell me which driver you are using for the X-Fi. Im running Windows Vista 64bit UK and if I

  • HT1454 Where can I get an iPhone 4S av lead

    Where can I get an AV lead for an iPhone 4S many thanks

  • Creating Links Within Documents

    Hello, You know those emails that we get from stores with images that you click on and each image opens a different link? How do you make these documents in Appleworks? Thanks, Jerry P.S. I've gotten as far as making a .cwk file, which works fine onc