HP LaserJet 1022 driver problem with Windows 7

I can not load the drivers for LaserJet 1022 on my new acer windows 7 lap top.  I got a windows 7 machine a couple years ago and Had no problem loading drivers.  Any one have any suggestions.?

Hello Abzozo1.  I understand you're getting the "webcam not detected" error.
What is the exact product number of the notebook?  This document can show you where it is located.
Has the webcam ever worked since you upgraded the operating system?
To ensure that you have all of the software installed properly I suggest installing the HP Software Framework and HP Support Assistant.  You can then run HP Support Assistant and it will automatically install any missing software.  If that doesn't resolve the issue I suggest you take a look at my thread located here.  This thread covers the common solutions to this error.
Take a look at that thread and let me know if any of the steps help.
Have a great day!  I'll keep an eye out for your next reply.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Similar Messages

  • MOVED: Driver problems with Windows Professional XP 64bit Edition

    This topic has been moved to Operating Systems.
    Driver problems with Windows Professional XP 64bit Edition

    Well, after looking around the forum here I found an answer that works! I wish I could remember who to give credit too though. I installed the latest Vista drivers and I got static all the time. I tried another members suggestion of disabling the X-Fi device in the Device manager every time I log off and then enable the X-Fi the next time I log in. I have great sound as long as I do that. Also, for connecting to a home system I am using the DTS-60, $00 on this website, but it works well if you havea DTS decoder. I am using the X-Fi extreme Music edition. Good Luck, hopefully another driver is on the way.

  • Scanner driver Problem with - Windows 8.1 and HP AIO L7680

    Hi folk,
    i have a problem with my HP AIO L7680.
    I have made an upgrade to Windows 8.1 x64
    I install the actual driver version 14.8.0.
    The printer runs but the scanner makes trouble.
    When i will start a scan process i will get an error message and the scan process will be canceled.
    I will get this error message with photoshop, HP Solution Center and any other scanner software.
    The HP Print and Scan Doctor says i should contact the support.
    Here i am any idea?
    By the way i disabled my Antivirus Software during the installation.
    Thanks a lot.
    greetings
    Markus
    This question was solved.
    View Solution.

    Hi Markus,
    I understand that you are having an issue with scanning after upgrading to Windows 8.1. I will try my best to help you resolve this issue. I just need a little more information. What operating system are you running on your computer? Are you connecting wireless or with a USB cable? What is the error message that you are getting?
    I am including this document for A 'No Scan Options' or 'Scan settings are not set' Message Displays on the All-in-One there are trouble shooting steps for Windows 8 that will work for Windows 8.1.
    I hope this helps, let me know.
    Thank you,
    I worked on behalf of HP.

  • Hp laserjet p3005d connection problem with windows 7 os

    my laptop has windows 7 os but the hp laserjet p3005d connection keeps droping. The message says " the device connected via usb has malfunctioned and not recognised by windows" . restarting the printer solves the problem but this is very frequent now. I have even installed the hp universal driver but still no relief. PLEASE HELP SOMEONE!!!!!

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Laserjet board here:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Best of Luck!

  • Satellite 2770 - Display driver problems with Windows 2000

    Hello,
    I've a Toshiba Satellite 2770 and installed Windows 2000 on it. If I'm not wrong the S2770 does have a S3 Savage IX/MV graphic card and I downloaded the Windows 2000 driver from the S3 website but it wont be recognized by the hardware detection.
    Then I tried the Windows 95SE driver from the Toshiba website, but Windows 2000 wont acept it due it's not suitable for Windows 2000 as it seems.
    What to do? Isnt there a Windows 2000 driver out there which works? I dont want to work in 640x480 and 16 colors forever!

    Hello
    You are absolutely right. Your unit has S3 Savage IX8 graphic card but problem is that your unit is delivered with WinME operating system. That means that there is no support for other operating systems. All drivers are designed for each notebook model and OS separately. The only way to solve this problem is to install the driver given by graphic card producer. If this not works you have a big problem.
    Sorry but I really dont know what you can do. Maybe you can try to install the driver designed for Sat 2750. There is the same graphic card but driver is designed for Win98SE.

  • G510 Dolby Digital Plus Advanced Audio doesnt work driver problem with Windows 8.1

    Hi,
    my Lenovo G510 has Windows 8.1 64-bit.
    In the system menue of Hardware and Sound I can see two entries:
    1) Dolby Digital Plus Advanced Audio
    2) Dolby Digital Plus Advanced Audio (32-bit)
    Clicking on the first entry a control panel appears. Does this mean that Dolby Digital Plus Advanced Audio is always running in the backround? There is no entry in the systray.
    Clicking on the second entry this error message appears:
    Your current installed version is 7.3.2.2 of the Dolby Digital Plus audio driver. The software needs the driver version 7.5.1.1. Installe a correct combination of driver and software.
    What to do with this? I searched for a solution and drivers but couldn´t find anything.
    Thanks for your help.
    Solved!
    Go to Solution.

    Hi Zoori,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that “Dolby Digital plus Advanced Audio” is not working as expected in your G510 Laptop and displaying an error message to install the upgraded version of the Dolby driver in the computer, below are the troubleshooting steps to check and resolve this issue.
    Open Device Manager. (Right-click on the Start button and choose Device Manager).
    Expand the Sound, Video and Games Controllers section.Right Click on the Conexant Smart Audio HD item and choose Uninstall.
    Still in Device Manager, click on Action>Scan for new Hardware.
    The Conexant Smart Audio item will re-appear.Right-Click on it and choose update driver.Navigate to d:\drivers\audio.When that's done, close Device Manager.Open File Manager and navigate to D:\drivers\Audio\DolbyGUI and install Dolby Digital plus Advanced Audio.
    That should get rid of the error message and this version of Dolby Digital plus Advanced Audio should be working as expected.
    Do post us back if the issue persists.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Paravirtualized Driver problem with Windows XP SP3

    Hi,
    While trying to install Oracle PV block dirvers to a fresh Windows XP SP3 system in Oracle VM 2.1.5 I get a blue screen of death. Any advice on how to overcome the problem would be greatly appreciated.
    Best regards,
    V.B.

    Hi, rlomba
    Thank you for your reply.
    Of course I know about .Net and netfront. Moreover, I have successfully installed Win Server 2k3 as PV.
    I think the problem is a bit deaper. When I skip block device I can proceed with installation, however on reboot Oracle PCI (SCSI-?), and network drivers fail to start.
    A more generic question: did anybody succeed with installing Oracle PV drivers to XP? What SP was it?
    Thanks in advance

  • Satego P100-10U - Driver Problems with Windows 7

    Hi!
    As also recommended by Toshiba I installed Windows 7 64 bit on my Satego P100 10u Laptop. However after doing so I face the following issues:
    - there is no sound although the audio device (Conexant High Definition Smart Audio HD2) driver seems to be installed.
    - the sd card slot is not recognized
    Unfortunatelly I did not find any Windows 7 drivers in the toshiba driver download area for these devices.
    Can anybody please help me?
    Thanks a lot and kind regards
    Gunnar

    >The audio device is listed as "Conexant High Definition SmartAudio HD2" but with a yellow exclamation mark, as it does not work properly
    Delete this device from the device manager list and reboot the unit.
    Usually the OS should automatically delete the new device and should search for drivers.
    Fact is that if this device is recognized as Conexant High Definition SmartAudio then the driver is already installed and there could be other issue.
    >Any other idea how to get the original driver or another one without re-installing the complete system (please not - would take so much time as everything else is configured now) with a little chance of success?
    Well, if the tip mentioned above will not help, then a new installation might be a good idea even if this would take some time

  • Driver problems with Windows Vista 64

    Hello, I recently upgraded to Vista 64bit. I have a Creative Sound Blaster Audigy model# SB0090.
    Whenever I try and install the drivers, it says:
    "Set is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this Setup. Setup will exit."
    I've been reading through the forums, and haven't seen anything useful. I tried downloading the 3rd party software by kX that I saw someone recommend, but it didn't work either. It said it installed the drivers, but that there was a conflict. Still says "No Audio Output Device is installed" in the bottom tray.
    Someone help me, I want to have sound on my PC with vista

    Well, after looking around the forum here I found an answer that works! I wish I could remember who to give credit too though. I installed the latest Vista drivers and I got static all the time. I tried another members suggestion of disabling the X-Fi device in the Device manager every time I log off and then enable the X-Fi the next time I log in. I have great sound as long as I do that. Also, for connecting to a home system I am using the DTS-60, $00 on this website, but it works well if you havea DTS decoder. I am using the X-Fi extreme Music edition. Good Luck, hopefully another driver is on the way.

  • External hard disk drive problem with windows laptops?

    my other hard disk drive cannot be read or write on windows and on my macbook pro 13.

    If the HDD cannot be read on either machine, it may have failed.  Connect it to your MBP and open Disk Utility.  Is it recognized there?
    Ciao.

  • How can I get my hp Laserjet 1012 to work with Windows 7?

    How can I get my hp Laserjet 1012 to work with Windows 7?

    Here is a list of products that are not supported in the win7 OS. This product is listed there.
    Products not supported in win7
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Problem with Windows 8.1 and Corseca Byte BT headset

    I recently bought a Corseca Byte bluetooth headset.
    The headset works fine with phones.
    Initially when connected to the laptop running windows 8.1 it works well and continues to flawlessly for hours.
    The problem is when the headset is connected to the laptop but there is no audio streaming (e.g paused a movie playback for attending some other job) and resume playback after 10-15 minutes the audio starts stuttering/ becomes choppy. If I switch off the headset
    and restart it works fine unless it lays unused for some time.
    Windows recognizes the device correctly. I've turned off power management for BT devices and tried to update the drivers without any positive result.
    Initially I thought the headset was defective but since it works flawlessly with phones I think it is a problem with Windows 8.1.
    How to solve the issue?

    Hi,
    Have you also tried to disable power management on wireless network connection adapter? Since some OEM computers also combine some features of Bluetooth to wireless network connection adapter.
    This issue can be mostly caused by drivers. Please contact the menufacturer's to see if the latest driver is compatible with Windows 8.1.
    If not, I suggest you find the driver for Windows 8 /7 and install it in compatible mode in Windows 8.1 to see what's going on.
    Also, post back the C:\Windows\Inf\setupapi.dev.log and event log you can find in event viewer related to this issue here for our research.
    Kate Li
    TechNet Community Support

  • Hard drive problem with HP Pavillion dv7-4180us

    Hard drive problem with my HP Pavillion dv7-4180us. Using Windows 7.
    Boots up sometimes and very slow.
    Appreciate any help.

    Have you booted into the BIOS or Diagnostics Tool to run the Hard Drive Test?

  • Backup Problem with Windows Server Backup

    Hello,
    we have problems with Windows Server Backup Feature.
    Our system is a Windows Server 2008 Standard. On the computer runs a SQL Server 2005.
    Since several days no backup can be carried out. We get the error message:
    - Error during a Volume Shadow Copy service operation. Detailed error: Failed to process the volume shadow copy: "0x800423F0".
    - Errors in the event log: For the started backup an error occured. The volume shadow copy operation  was not successful. Error code: "2155348129". Run the backup again after the problem was fixed.
    We have already tried to restart the services, uninstalled the Windows Server Backup Feature and reinstalled it, also we rebootet the server several times. Unfortunately, so far without success.
    What else can we do respectively where could be the problem?
    Kind regards
    Sven Otto
    KRK ComputerSysteme GmbH (Germany)

    Hi Sven,
    Please check if there a system partition that is created on the server. If so, assign a drive letter on the partition to check the results.
    For more detailed information, please refer to the article below:
    Volume Shadow Copy Error 0x800423f0 - writer error: inconsistent snapshot
    http://kb.backupassist.com/articles.php?aid=2995
    Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Best Regards,
    Mandy 
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • DVDRAM Drive problem with my Toshiba P105-S6020

    The DVDRAM GMA 4082N installed on my P105-S6020 is all of a sudden not being recognized my the system. Attempts to troubleshoot, un-install and re-install the device as well as downloading the latest drivers have yielded no results. HELP!!!
    Solved!
    Go to Solution.

    There was an issue where the DVD drive suddenly becomes missing from My Computer.  This is a problem with windows and can be easily fixed by editing the registry.  First, check if the drive is recognized under the BIOS.  Second, check the device manager if it shows any yellow exclamation marks (yield sign) on the DVD drive.  Lastly, check My Computer to see if the drive is missing.  If all these 3 are correct, then this can be fixed by a program that can be downloaded from the link below.  Just follow the instructions and you should be good to go.
    CD / DVD drive missing from 'My Computer' (Windows Explorer)
    =====================================================
    Okay, now I've closed all the windows. What do I do next? By the way, it's a bit warmer with all the windows closed...

Maybe you are looking for

  • Working with libraries/catalogs in Photoshop Lightroom

    So, you have a question or two or three about Lightroom Libraries/Catalogs. Not to worry, Adobe have provided a  TechNote , which is aimed at addressing questions such as: Note: with the introduction of Lightroom version 1.1 Adobe have replaced the t

  • I'm having troubles with reinstalling lion from Recovery HD

    Hello everybody. Please keep in mind that I'm not english, so I'll probably do some grammar errors. Here there's my problem: I decided to reinstall Mac OS X Lion, on my macbook pro 15" (late 2010). Everything worked well, I just wanted to clean every

  • How to put value in Session from AM ?

    in AM : i have a condition like this if (tool_id != null) //initialize lov and pass this tool_id to lov's controller. how can I do it ? If I had to do it from the controller, I would have put the value in session parameter, but how Do I put a paramet

  • HP Compaq 8510w BIOS Update failed, stuck in bootloop.

    Let me begin with how this happened. I wanted to create a Hackintosh and decided to use my HP Compaq 8510w for that purpose. But since HP whitelists what WiFi cards you can use (OS X is not compatible with Intel), I had to flash a custom BIOS that re

  • N+1 Mobility List

    Hi Experts, According to Cisco documentation, controllers with N+1 redundany do not have to be in the same mobility group, which is for roaming purposes. In my situation, the backup controller is located in a different city. Do primary controllers ne