HP Laserjet 1022nw printing multiple copies

HELP! Ever since I purchased my new laptop with Windows 7, my LaserJet has been going crazy. I reinstalled new drivers and used the HP diagnostic tool and it says "all is working correctly". However, when I print a document of any size (even if just one page), the printer keeps re-printing multiple copies until the paper runs out or I turn the printer off. I have un-installed and reinstalled several times and the same issue keeps happening. I posted on the forum and one other person related that he had the same issue, but to this date neither of us have been able to correct it. I love my laser jet when it works, but have resorted to using my hp photosmart 7960 instead (higher cost of ink!). And this sucks because sometimes I have 50-100 page documents that I need to print. Laser is so much faster. Thanks in advance for the expert advice I know you are going to give me and the solution that I KNOW that you must have.
Stephanie Iseri

Hi, try unchecking the Enable bidirectional support found in the 1022nw Printer properties/Ports.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

HP Laserjet 1022nw running with Win7 64 computer printing multiple copies - won't stop

HP Laserjet 1022nw running with Win7 64 computer printing multiple copies - won't stop until you shut off. It resumes printing when you turn the 1022nw back on
Have renistalled Driver
It worked fine with Vista and XP

Hello @Astronav,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the issue of multiple pages continuously printing from your Windows 7 computer to your HP LaserJet 1022nw Printer. However, in order for me to provide you with accurate support I do need to know how your printer is connected to your Windows 7 computer.
Normally the continuous printing issues are caused by your router. When you send the print command to your printer from your computer than the print command goes from your computer to your router and finally to the printer. If there is a conflict with your router it may constantly send the signal to the printer to 'print' a job. Or, if the printed text is garbled information and weird symbols that your printer is printing it could be commands from the router to your computer that are improperly being sent to your printer and resulting in a page of weird symbols printing.
Therefore, it is very important for me to know how your printer is connected to your computer as that will guide us in the what direction we need to be troubleshooting.
Once I find out how your printer is connected to your computer I will be able to provide you with step-by-step instructions on how to resolve this continuous print issue. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Laserjet 5000 with windows 7 driver cannot print multiple copies unless disabling mopier

Customer has Laserjet 5000 that they have been using for approx 5 years. It is connected to one computer with the standard parallel cable and the driver is using lpt1. It is used mainly to print word documents and a multi page publisher document. The computer used to be a windows xp computer and all worked well with the PCL6 driver and that is the only driver that was used
They just bought a new Windows 7 32 bit computer and now it has lost some of the functionality.
The first driver that was loaded was the driver that Windows 7 used after you use the windows update button that you get during the add printer wizard. I think it was the pcl 5 driver as that is the driver that the computer will install if you remove the printer and then restart the computer. Using this driver, when you choose to print more than one page or multiple copies, it will just print the first page or copy and there will not be any errors displayed.
I have since downloaded the PCL6 driver, PS driver and PCL5 driver from HP's website and tried all of them.
The PS driver will print more than one page, but when it gets to about the 4th page the printer prints out an error page. The error is PCL XL error, Subsystem: Kernel, Error: Unsupported protocol, Operator 0x0, Position:0
The PCl 6 driver will print the same error page and not print any print jobs, even if it is just a single page, single copy job.
The pcl 5 driver prints one page and then stops printing, no errors.
When I disable the mopier under device settings, the pcl5 driver will print everything just fine. Only problem is, it will not collate. The collate checkbox is available and checked when we try the multiple page multiple copy publisher document, but it just prints out as if we do not have collate checked. If we could get collation to work, than we are good to go.
I have not tried the PS driver with the mopier disabled.
The PCL6 driver stills returns the pcl xl error with the mopier disabled.
The printer does not have any extra memory, just the 4 mb standard that came with the printer. I am wondering if this is a memory issue triggered by Windows 7and I just need to get more memory for the printer. (Computer has 4 gb of memory)
Anybody else have a similar issue and got theirs fixed?
Thanks in advance.

Hi jnickelsen,
I understand the printer won't print multiple copies.
Thank you for your reply.
I will be happy to help you with this.
This printer doesn't have the Mopier settings.
What drivers are you using?
Did you download the drivers or are you using the Windows preinstalled drivers?
If you are using the Windows preinstalled drivers then I would download the latest drivers. Here is the URL for the HP LaserJet Full Feature Software and Driver.
I would download and run the Print and Scan Doctor since it might resolve the issue automatically.
Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laserjet won't print multiple copies on Windows 8

No matter how many print copies I request, it only prints one at a time. Using Word 2010. I'm running Windows 8.1 and the printer is a 1320 PCL5.
This question was solved.
View Solution.

The START Button returns with Windows 8.1; Classic Shell for Windows 8; and
future Windows 10.
METRO interface -- go to Settings for Printers.
Device and Printers is correct area for setup/changes.
The ABS PDF Driver v400 is not a Physical Hardware printer, it is the ability for you to convert a MS Word document by "printing" to an Adobe PDF file.
Under Devices and Printers, you should see an HP Printer (1320) Icon/Image OR
the HP Universal PCL Driver (Icon/Image) for HP Printers.
====
HP Advisory.
NOTE: The PCL6 print driver has continued to experience some difficulties printing multiple copies from accounting applications to the HP LaserJet 1320 series printer after enabling advanced printing features.
Printing with the HP postscript (PS) emulation print driver and enabling the advanced printing features has resolved this issue in these cases.

Laserjet 1020 Won't Print Multiple Copies

I have a Laserjet 1020. OS is Windows 7, 64x. If I give a command to print any document multiple times, it will only print it once. So, if the document is 1 page and I need 5 copies, it will print that one page one time. If the document is 4 pages and I need 5 copies, it will print the four pages of the document, but only once. So, the issue is with multiple *copies*, not multiple *pages*. I have tried the simple stuff (turning the computer on and off; checking for updates; removing the printer and completely reinstalling it; etc.). Nothing works. I did see elsewhere somebody say that if you go to start; devices/printers; right click printer; and hit DEVICE SETTINGS tab, then you can change this "MOPIER" mode thing. But that is the problem... THERE IS NO DEVICE SETTINGS TAB. No, I am not crazy. It isn't there. So, the problem with that fix, which appeared to work for others in the HP Forum, won't work for me because there is NO DEVICE SETTINGS TAB. So... How do I fix this? Why don't I have a device settings tab? Help! :-)

Hi jnickelsen,
I understand the printer won't print multiple copies.
Thank you for your reply.
I will be happy to help you with this.
This printer doesn't have the Mopier settings.
What drivers are you using?
Did you download the drivers or are you using the Windows preinstalled drivers?
If you are using the Windows preinstalled drivers then I would download the latest drivers. Here is the URL for the HP LaserJet Full Feature Software and Driver.
I would download and run the Print and Scan Doctor since it might resolve the issue automatically.
Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Problem with 4250dtn printing multiple copies Windows 7 64 bit

We can't print multiple copies from within some, but not all, applications to a Laserjet 4250dtn from Windows 7 64-bit workstaitons. Windows 7 32-bit ones work fine. The printer is served from a Server 2003 printer queue, but even when we print direclty to the port we only get one copy. Setting copy count from the printer dialog works fine, but we need to have the applications invoke multiple copies. We are using the UPD 64-bit driver; could not find a legacy driver for this printer for Win 7 64 bit. I've tried various tricks found elsewhere on this forum, including turning off mopier mode, printing directly to the printer, disabling advanced features, etc. to no avail. Help, anyone! Thanks. Jerry TurnbowUSBO

Thanks very much for the feedback. I was getting worried!
The command window opens when I double-click on the Developer Day VM and I get a few lines that scroll off the window about loading Linux .... These lines never come back and I can't scroll in the command window.
As soon as the above messages come into the command window the whole process stops. The window stays open but I get no response from it. I get no login prompt or anything.
Do you think it could be a VirtualBox setup issue? I downloaded and installed the product along with the extension pack with no apparent problems and when I start VirtualBox I see the Developer Day VM listed in the left panel. All I do at that point is double-click it like the download web site said but I don't get the same results, i.e. no chance to login. It seems all I can do at that point is close the window by clicking the 'X' and it asks me 3 things about what to do with the VM and I usually say to shut it down. None of the other options look any better either.
Any other suggestions are most welcome!!
Thanks again!
-gary

HP printer will not print multiple copies of docs using new HP Pavilion HPE Series PC.

I purchased a new HP desktop computer with Windows 7. I connected my existing HP laser jet printer to the new PC and the drivers installed successfully. When I want to print multiple copies of a document the printer only prints one copy and stops. I can print multiple copies on my Kodak color printer from the new PC. I did not have this problem with my old PC. The issue only exists between the new PC and the existing HP laserjet printer. I have checked all printer preferences and settings to no avail. Any suggestions for further trouble-shooting?

printer model? is your win 7, 32 bit or 64 bit?
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Unable to print multiple copies of documents on Win7 machine with Office 2010

Since upgrading to Windows 7, I have been unable to print multiple copies of documents in any MS Office 2007, 2010, Word Pad or Adobe Reader 9. I also experience the same problem if I print from Word Pad. The issue appears to be associated with the Collate Option in the Print Dialog box. If the Collate box is checked, I only get one copy of the document. If I uncheck the Collate box I get as many copies as I choose. The problem is that with the Collate box unchecked, I have to collate multiple copies by hand, and with 10 – 20 copies of multi-page documents that can be quite a chore.
The ironic thing is that MS Visio 2003, on the same machine, prints and collates as many copies as I choose, with the Collate box checked.
I can print multiple copies of Word 2003 documents from my wife’s Win XP machine to the same printer, but not from my Win 7 machine with Office 2010.
My printer is an HP LaserJet 1320nw and I have downloaded and installed the latest printer drivers from the HP Web site.
Has anyone experienced this problem, and if so, are you aware of a solution other than unchecking the Collate box?

I have the same issues with my LJ1320. I have Office 2010 and Windows 7 Ultimate 64 bit. However, my printing problem is more widespread since I have been unsuccessful at printing multiple copies of all types of documents, not just from Office 2010. For example, I have the same problem trying to print multiple copies from Internet Explorer.
I also have other problems printing from Office 2010 that you may not have discovered yet. I cannot print Excel spreadsheet grid lines from Office 2010 if those documents were originally created in an earlier version of Office. I tried saving them as Office 2010 documents and also using compatibility mode but nothing worked. These same documents print fine on the same printer from my laptop which uses Windows Vista and Office 2007. Also Excel spreadsheets originated in Office 2010 print nicely.
Looks like HP has a few bugs in their printer drivers.
I note that HP released a new Universal Print Driver for Windows PCL5x64 on Feb 18, 2011 (Version 5.2.6). Have you tried it yet?

6110 All-in-one sometimes will not print multiple copies

I have had this problem for sometime now. I searched the forum and found the Mopier solution for laserjets, but the 6110 does not have this setting. The same question regarding the 6110 went unanswered in the only post I found for it.
I am using the 6110 on WinXP Pro and connected by USB
Often times when I try to print multiple copies of a document (MS Word or MS Works as examples) I check 2 copies in the selection box but the printer only prints one copy. I then have to click Print again. What is strange is, sometimes it performs fine and others it will not print more than one copy at a time. Sometimes it SEEMS that if I change the "collate" checkmark it works, but proper functioning does not seem to be able to be recreated every time.
I do not get any error messages, the darn thing just acts like I have 1 copy selected rahter than two. I notice that when this happens and I go to print a second copy, the dialogue box has reverted back to 1 copy, but in those few times when it DOES print 2 copies, if I go back and select Print, it still shows 2 for the number of copies.
Any ideas? Thanks in advance

Hi there,
To make sure the software side of the house is in order lets try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

1300 suddenly stops printing multiple copies

My Laserjet 1300 suddenly stopped printing multiple copies. I am using the driver supplied with win7 and it has been working for the last year. I have tried installing PCL6 driver instead of PCL5 and I can print multiple copies for one job only and then the computer does not recognize the printer. Has HP sent an update that has changed the way win7 works with the printer? Any one with a solution or idea? Thanks, John

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I am unable to print multiple copies on 1 page

I have a macbook and I used to be able to print multiple copies on 1 page. It had a selection on the bottom right. Now something has changed with the format. It allows me to select multiple copies, but only prints one.

Hi,
In order to print multiple documents on one page, you may follow the steps mentioned below:-
Press Command+p- Select multiple pages or booklet
If you are not getting these options, please send us a screenshot to better understand the issue.
Regards,
Nakul

Printing multiple copies of 3 page BOL in Duplex mode-

Hi Gurus!
I have created a smartform to print the BOL on front side and terms and conditions on back side. I used the duplex mode to print and it works perfectly fine. When I have a BOL with 3 pages of information , it prints the items on the front side and terms and conditions on the second side and it does everything absolutely correctly.
At our organization we always print 5 copies of any BOL and that is when the problem arises. When we do a printing of the BOL form with number of copies set to 5 , it prints very akwardly with the settings. First it prints page 1 front and same thing on the back, then again the first page on the first and its back and then front on the third side , then similarly 5 sides of terms and conditions and then followed by 5 sides of page 2 items and followed by 5 sides of terms and conditions, which is very akward. Actually it should print first set with page 1 and TC on back of it , then Page 2 and TC on its back and page 3 and TC on its side like it does when I make a single copy.
Is there any settings that I am missing thats making the above happen when I print multiple copies of the BOL?
Please suggest.

Hi!
Thanks for the reply. I changed the settings of the printer to 'Pass Copies as Separate Output Request(in SAP System)' and re-tried printing 5 copies of the BOL and it again seems to print the first page 5 sides then Terms and conditions on 5 sides, then again 5 sides of page 2 and followed by 5 sides of T&C.
My settings on the smartforms is front page "D' and the back and the Last page is blank setting. This runs well when I just have to print one copy of my BOL , it prints the front page and then T&C on its back side , then again the second page and T&C on its back . This only messes when its more than one copy of the set of BOL.
Please suggest as to what to do next to make it print in proper sets.
Thanks and Regards
Aarav

Print Multiple copies of report, and resetting Page number for each copy.

Dear frnds!
i am using developer 6i reports i have a problem.
i want to Print Multiple copies of report, and resetting Page number for each copy" that is 4 copies of an invoice is required
1 - for user copy
2- gate copy
3- accounts office
4- office copy
any body please tell me the solution "i am using oracle 9i and developer 6i"
Thanx
Ibrar

Hi,
I was wondering if you were able to get your multiple copies working? Below is what I have so far, just trying to get it to work before changing the actual template.
<?for-each-group@section:R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
<?variable@incontext:G1;R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
<?for-each@section:xdoxslt:foreach_number($_XDOCTX,1,3,1)?>
HEADER
PSN: <?$G1/Pick_Slip_Number_Display_ID54?>
PSN Detail: <?$G1/PickSlipNumber_ID260?>
Page 1 of 3
<?start:body?>
BODY
<?$G1/LineNumber_ID6?>
<?end body?>
FOOTER
<?end for-each?>
<?end for-each-group?>
XML:
<R5542520>
<Pick_Slips_Detail_Lines_S24>
<Header_Custom_Section_S24>
<Pick_Slip_Number_Display_ID54>123456</Pick_Slip_Number_Display_ID54>
<PickSlipNumber_ID260>123456</PickSlipNumber_ID260>

Printing Multiple Copies of Same Image on Multiple Pages

I have Photoshop Elements 11 on a Windows 8 platform. I can NOT get it to print multiple copies of the same file on multiple pages. I need one file printed on one page multiple times. I have tried the CTRL-ALT-SHIFT and nothing changes. It still just prints one and is done.
I use this for label printing, so I need it to print more than one copy at a time. It also is not saving the settings, so everytime I hit print, I have to readjust the print requirements. This just is not going to work when you need to print a few hundred copies at a time.

You can create your own picture package, if none of the options in the PSE print window>Type of Print work for you. Just make a blank file, copy/paste your image and alt drag it to make multiple copies. You can use the move tool to position things as you want them.
Generally speaking, though, for something like label printing, it's simplest to use PSE to create the image, then use your word processing/desktop publishing program to print the actual labels.

How can I print multiple copies of same photo onto one page on iPhoto 9.5.1?

How can I print multiple copies of same photo onto one page on iPhoto 9.5.1? I was able to do it on the old iPhoto, but can't seem to be able to do it on the new iPhoto. Grrr...

Photos does the same thing.... Only workaround I can come up with is to create a template in Pages and copy & paste.

HP Laserjet 1022nw printing multiple copies

Similar Messages

Maybe you are looking for