HP Laserjet 1200 multiple copies problem

I am trying to print multiple copies of an index card document to my HP Laserjet 1200 printer.  However, it will only print 1 copy, regardless of how many copies I tell it to print.  Any ideas what I'm doing wrong?  I have rebooted both the printer and the computer, to no avail.

How to print multiple copies (In order to get printing of multiple copies you need to disable "Mopier Mode")
Click Start
Click Devices and Printers
Right click your Laserjet printer
Click on Printer Properties  (not just "Properties" at the bottom of the drop-down menu - DB)
Click the tab labelled Device Settings
Scroll down to the bottom (If necessary expand Installable Options)
Click on and DISABLE Mopier Mode, which should be the last of the Installable Options
You should now be able to print multiple copies.
This information is not specific to Windows 7 and also applies to some other HP Laserjets.

Similar Messages

  • Multiple copies problem with HP3550

    Here's the problem. We have 2 HP Color Laserjet 3550's connected to our network and clients set to print through a Queue on our xServe (10.3.9). When trying to print multiple copies of any document, we only get the first copy. This has been set up this way for about 8 months now and this just started happening recently. Any thoughts. We didn't change anything that I can think of.

    I just recently reinstalled After Effects...
    What you did BEFORE reinstalling AE may also be very significant.  Did you follow the Adobe instructions for uninstalling the application from your particular computer & OS and then run the Adobe Cleaner application? 
    I hope you didn't just wing it and hope for the best.

  • Laserjet 5000 with windows 7 driver cannot print multiple copies unless disabling mopier

    Customer has Laserjet 5000 that they have been using for approx 5 years. It is connected to one computer with the standard parallel cable and the driver is using lpt1. It is used mainly to print word documents and a multi page publisher document. The computer used to be a windows xp computer and all  worked  well with the PCL6 driver and that is the only driver that was used
     They just bought a new Windows 7 32 bit computer and now it has lost some of the functionality.
    The first driver that was loaded was the driver that Windows 7 used after you use the windows update button that you get during the add printer wizard. I think it was the pcl 5 driver as that is the driver that the computer will install if you remove the printer and then restart the computer. Using this driver, when you choose to print more than one page or multiple copies, it will just print the first page or copy and there will not be any errors displayed.
    I have since downloaded the PCL6 driver, PS driver and PCL5 driver from HP's website and tried all of them.
    The PS driver will print more than one page, but when it gets to about the 4th page the printer prints out an error page. The error is PCL XL error, Subsystem: Kernel, Error: Unsupported protocol, Operator 0x0, Position:0
    The PCl 6 driver will print the same error page and not print any print jobs, even if it is just a single page, single copy job.
    The pcl 5 driver prints one page and then stops printing, no errors.
    When I disable the mopier under device settings, the pcl5 driver will print everything just fine. Only problem is, it will not collate. The collate checkbox is available and checked when we try the multiple page multiple copy publisher document, but it just prints out as if we do not have collate checked. If we could get collation to work, than we are good to go.
    I have not tried the PS driver with the mopier disabled.
    The PCL6 driver stills returns the pcl xl error with the mopier disabled.
    The printer does not have any extra memory, just the 4 mb standard that came with the printer. I am wondering if this is a memory issue triggered by Windows 7and I just need to get more memory for the printer. (Computer has 4 gb of memory)
    Anybody else have a similar issue and got theirs fixed?
    Thanks in advance.

    Hi jnickelsen,
    I understand the printer won't print multiple copies.
    Thank you for your reply.
    I will be happy to help you with this.
    This printer doesn't have the Mopier settings.
    What drivers are you using?
    Did you download the drivers or are you using the Windows preinstalled drivers?
    If you are using the Windows preinstalled drivers then I would download the latest drivers. Here is the URL for the HP LaserJet Full Feature Software and Driver.
    I would download and run the Print and Scan Doctor since it might resolve the issue automatically.
    Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
    Hope this helps.
    Thank you for posting on the HP Forums. Have a great day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Problem with 4250dtn printing multiple copies Windows 7 64 bit

    We can't print multiple copies from within some, but not all, applications to a Laserjet 4250dtn from Windows 7 64-bit workstaitons.  Windows 7 32-bit ones work fine.  The printer is served from a Server 2003 printer queue, but even when we print direclty to the port we only get one copy. Setting copy count from the printer dialog works fine, but we need to have the applications invoke multiple copies. We are using the UPD 64-bit driver;  could not find a legacy driver for this printer for Win 7 64 bit. I've tried various tricks found elsewhere on this forum, including turning off mopier mode, printing directly to the printer, disabling advanced features, etc. to no avail. Help, anyone! Thanks. Jerry TurnbowUSBO

    Thanks very much for the feedback. I was getting worried!
    The command window opens when I double-click on the Developer Day VM and I get a few lines that scroll off the window about loading Linux .... These lines never come back and I can't scroll in the command window.
    As soon as the above messages come into the command window the whole process stops. The window stays open but I get no response from it. I get no login prompt or anything.
    Do you think it could be a VirtualBox setup issue? I downloaded and installed the product along with the extension pack with no apparent problems and when I start VirtualBox I see the Developer Day VM listed in the left panel. All I do at that point is double-click it like the download web site said but I don't get the same results, i.e. no chance to login. It seems all I can do at that point is close the window by clicking the 'X' and it asks me 3 things about what to do with the VM and I usually say to shut it down. None of the other options look any better either.
    Any other suggestions are most welcome!!
    Thanks again!
    -gary

  • Laserjet 1020 Won't Print Multiple Copies

    I have a Laserjet 1020.  OS is Windows 7, 64x.  If I give a command to print any document multiple times, it will only print it once.  So, if the document is 1 page and I need 5 copies, it will print that one page one time.  If the document is 4 pages and I need 5 copies, it will print the four pages of the document, but only once.  So, the issue is with multiple *copies*, not multiple *pages*.  I have tried the simple stuff (turning the computer on and off; checking for updates; removing the printer and completely reinstalling it; etc.).  Nothing works.  I did see elsewhere somebody say that if you go to start; devices/printers; right click printer; and hit DEVICE SETTINGS tab, then you can change this "MOPIER" mode thing.  But that is the problem... THERE IS NO DEVICE SETTINGS TAB.  No, I am not crazy.  It isn't there.   So, the problem with that fix, which appeared to work for others in the HP Forum, won't work for me because there is NO DEVICE SETTINGS TAB.  So... How do I fix this?  Why don't I have a device settings tab?  Help!  :-)  

    Hi jnickelsen,
    I understand the printer won't print multiple copies.
    Thank you for your reply.
    I will be happy to help you with this.
    This printer doesn't have the Mopier settings.
    What drivers are you using?
    Did you download the drivers or are you using the Windows preinstalled drivers?
    If you are using the Windows preinstalled drivers then I would download the latest drivers. Here is the URL for the HP LaserJet Full Feature Software and Driver.
    I would download and run the Print and Scan Doctor since it might resolve the issue automatically.
    Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
    Hope this helps.
    Thank you for posting on the HP Forums. Have a great day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Problems with multiple copies of each photo

    I'm relatively new at using Photoshop Elements and when I was moving my photos from my old computer to my new one using an external hard drive I got multiple copies when I uploaded them to my new computer. How do I avoid this?
    I think that I had the same photos in diffrent files on the external hard drive and thus got them four times on my new computer. Do I need to sit and erase them by hand(it's 13 000!!) or what do I do. I cann't just let them be, they take up way too much space on the computer.
    How do I do not to make the same mistake again the next time I need to move them?
    This probably is a silly problem when you are used to the program but we are all beginners some time I guess! Hope you can help me...

    You can stack the duplicate images and delete the stack.While deleting the stack, application asks which photos present in the stack you need to delete. The stack can be formed from automatically suggest stacks and then you can stack them at one place. You can try this thing first with a small group of images.

  • HP LaserJet 1200 printing problems

    Ever since I upgraded to Tiger, my formerly trusty HP LaserJet 1200 takes up to 10-20 minutes to print a single PDF page (even a simple one), and 2) can't keep track of documents in the queue (if I send a second document while the first is printing, the first one cuts out without finishing).
    I understand HP bundled the latest driver into Tiger, so no updated driver is available from HP. Although I installed the GimpPrint drivers, there appears to be no Gimp driver for the LaserJet 1200. Any suggestions greatly appreciated.
    G5 Mac OS X (10.4.5)

    Update: I realised that my printer was attached to a USB hub. It's been that way since I bought it and has always used like that. Anyway, on the off-chance (and bearing in mind that I had actually shut down my computer for the first time in a year or so last week), I instead connected the printer directly to one of the USB ports of my iMac. It immediately appeared in the Print Utility list!
    Sounds peculiar, but it seems that the problems was linked to a combination of a Tiger upgrade, the use of a USB hub, and the full shut down of the computer.
    Hope this helps someone.

  • Laserjet 1200 and Win 7 - small sheet orientation problem

    I am unable to get my HP Laserjet 1200 printer to work correctly with Windows 7 when printing a document narrower than 8.5x11.  The problem is that a 4x6 sheet is fed through the center of the printer but win7 wants to print as if the 4x6 sheet were fed through the left side of the printer.  Any suggestions are welcomed.  Thank you.

    Hi,
    cltoomey wrote:
    I recently upgraded to Windows 7, and now I am having trouble with my printer.  When I print "labels", the ink is faded for the first few, and then towards the end of the page it seems fine.
    I looked for drivers to download for windows 7, but don't see them.
    It's almost like a memory problem? Like it doesn't get all the graphics sent to the printer until halfway down the page.
    I use this for my small business to make labels for my products.  Does anyone know how to help?  I tried to call HP, but they are closed, it told me to do the online chat, but that said it didn't recognize my printer.  HELP!
    Thanks
    Carol
    The Windows 7 drivers are located here at the web support page for your product.. 
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HP LaserJet 1200 series BW USB problem

    I am unable to re install my HP BW LaserJet 1200 series printer. My system is WIN XP PRO, SP3.
    The printer was working fine, then something happened and the printer is not listed in Device manager. The printer self check works OK,, but when I plug in the USB cable, there is no screen respons that a new USB device has been found. 
    Note , I have 2 flash drives attached to the USB ports that work OK.
    I tried to re install the 1200 series driver, but the printer is not  listed in Device manager.
    Any suggestions troubleshooting tips would be appreciated.
    Thanks,

    I've often had this problem when I start a print but the 1200 is not connected, or for other reasons. I either:
    1. Turn the HP 1200 off then on; or
    2. Go to Print centre and delete the job.
    One of these always fixes the problem.

  • LaserJet 1200 driver problem

     HP Laserjet 1200 printer with Windows 7...   The problem is that a 4x6 sheet is fed through the center of the printer but win7 wants to print as if the 4x6 sheet were fed through the left side of the printer.  Any suggestions are welcomed.  Thank you.

    It's almost certainly a driver probelm, particualrly if it happens in other programs too. Do you have a win7 driver?

  • HP Laserjet 1022nw printing multiple copies

    HELP!  Ever since I purchased my new laptop with Windows 7, my LaserJet has been going crazy.  I reinstalled new drivers and used the HP diagnostic tool and it says "all is working correctly".  However, when I print a document of any size (even if just one page), the printer keeps re-printing multiple copies until the paper runs out or I turn the printer off.  I have un-installed and reinstalled several times and the same issue keeps happening.  I posted on the forum and one other person related that he had the same issue, but to this date neither of us have been able to correct it.  I love my laser jet when it works, but have resorted to using my hp photosmart 7960 instead (higher cost of ink!).  And this sucks because sometimes I have 50-100 page documents that I need to print.  Laser is so much faster.  Thanks in advance for the expert advice I know you are going to give me and the solution that I KNOW that you must have. 
    Stephanie Iseri

    Hi, try unchecking the Enable bidirectional support found in the 1022nw Printer properties/Ports.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • The past few days my Mail app has started downloading multiple copies of e-mails from all pop servers.  This is only happening on my Macbook not other macs.  Deleting mail from server does not help. I ran ClamXav found 2 viruses deleted problem continues

    opps.  Long title there... The past few days my Mail app has started downloading multiple copies of e-mails from all pop servers.  This is only happening on my Macbook not other macs.  Deleting mail from server does not help. I ran ClamXav found 2 viruses deleted those.  Checked for software update and installed suggested downloads.  Problem still contintues.  Any suggestions?

    Folks,
    even after having repaired the inbox folder under "properties" a few times, I still had some e-mails where the contents are different from the subject line.
    In other words in the inbox there are two e-mails: one with subject line "abc", and another one with subject line "def".
    When I display the e-mail with the subject line "abc", the contents are from the e-mail with the subject line "def" in the in-basket.
    What else can be done to correct this problem?
    Thanks and best regards.
    Fred Kunz-Shirzad
    Chemin Ronzeures 6A
    1297 Founex VD
    Switzerland
    [email protected]

  • Problems printing multiple copies on 1 page in iPhoto version 9.5.1

    I'm having problems printing multiple copies of a photo in my version of iPhoto 9.5.1. I've tried looking at the answers given in Macworld forums for iPhoto '09 but I can't follow them as they refer to clicking 'preferences' - but this button isn't displayed on the 'print' page. Is my version iPhoto '09 or '11?

    iPhoto 9.5.1 is the most recent version of iPhoto '11, as part of the iLife '11 suit of applications.  The printing dialog changed between iPhoto '09 and iPhoto '11.
    The easiest way to print multiple copies of the same photo on one page is to simply duplicate your photo (from the "Photos" menu:  "Photos > Duplicate" and then to select all copies at once and use "File > Print":
    Then select a template and press the "Print" button.

  • HP Laserjet 1022nw running with Win7 64 computer printing multiple copies - won't stop

     HP Laserjet 1022nw running with Win7 64 computer printing multiple copies - won't stop until you shut off.  It resumes printing when you turn the 1022nw  back on
    Have renistalled Driver
    It worked fine with Vista and XP

    Hello @Astronav,
    Welcome to the HP Support Forums!
    I would like to assist you today with resolving the issue of  multiple pages continuously printing from your Windows 7 computer to your HP LaserJet 1022nw Printer. However, in order for me to provide you with accurate support I do need to know how your printer is connected to your Windows 7 computer.
    Normally the continuous printing issues are caused by your router. When you send the print command to your printer from your computer than the print command goes from your computer to your router and finally to the printer. If there is a conflict with your router it may constantly send the signal to the printer to 'print' a job. Or, if the printed text is garbled information and weird symbols that your printer is printing it could be commands from the router to your computer that are improperly being sent to your printer and resulting in a page of weird symbols printing.
    Therefore, it is very important for me to know how your printer is connected to your computer as that will guide us in the what direction we need to be troubleshooting.
    Once I find out how your printer is connected to your computer I will be able to provide you with step-by-step instructions on how to resolve this continuous print issue. I look forward to hearing from you!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Laserjet 4000n keeps printing (multiple) copies of first page

    My LaserJet 4000n model C4118A serial no. nlqwo15293 manufactered Feb 16 1999 is conected to home LAN (bt Home Hub 5)
    If I print a copy of the menu map using the buttons on the control panel I get muliple copies.
    If I try to print 1 copy of a 2 page document I get multiple copies of the first page
    I'm running Windows Vista Home Premium
    Suggestions please 
    is the printer unrepairable?

    Hi!
    Thanks for the reply. I changed the settings of the printer to 'Pass Copies as Separate Output Request(in SAP System)' and re-tried printing 5 copies of the BOL and it again seems to print the first page 5 sides then Terms and conditions on 5 sides, then again 5 sides of page 2 and followed by 5 sides of T&C.
    My settings on the smartforms is front page "D' and the back and the Last page is blank setting. This runs well when I just have to print one copy of my BOL , it prints the front page and then T&C on its back side , then again the second page and T&C on its back . This only messes when its more than one copy of the set of BOL.
    Please suggest as to what to do next to make it print in proper sets.
    Thanks and Regards
    Aarav

Maybe you are looking for