HP laserjet 5mp with snow leopard

I was successful in getting my terrific HP LaserJet 5MP to work with Snow Leopard 10.6.8 by connecting it with a USB to parallel cable. But very frequently it appears not to want to print PDFs.  The printer queue window tellsme the printer is offline.  If I clear that so that it tells me the printers is ready, it goes back to offline when I click on print for the PDF.  Any suggestions?

I have spent months to get my HP Laserjet 5MP running with my new iMac.
The Mac kept loosing the connection to my printer, I always had to unplug it and reinstall it...
I went nuts !
I never had problems with my old Windows laptop !
Finally it was fairly easy:
I am using Mac OX X 10.7.5
I just bought a new USB-to-parallel-cable.
The Mac immediately recognized the USB cable.
After that I was able to install the printer as usual.
Maybe I need to say that I am using the latest HP driver package, so I could choose the right driver for the installation...
It is working happily ever since !
Looking back, it must have to do with the (wrong) USB cable, although I cant tell what exactly was wrong with my old cable.

Similar Messages

  • HP Color Laserjet 3600 with Snow Leopard

    I know this model of printer (HP3600n) does not have a good reputation. But I have to deal with that because our school bought them before I started working there. The printers had been working 70% well with Leopard/Tiger last year. This year we upgraded our machines to Snow Leopard and now they only work 30%. In Leopard I used to add the printer through the "More Printer". With Snow Leopard I don't have "More Printer" option any more, so I added the printer though IP (LPD).
    The problem:
    1. When I print the 1st document, it prints sometimes. But, it still sits in the queue so the 2nd document could not print. I have to log in as administrator to use the "cancel -a -" command to clear the queue before I can print the 2nd document. It's so frustrate.
    2. Sometimes the document seems to print out, but when you go pick up the print out, it's not there. I have to power off the printer and power it back on and then the print comes out.
    Any clue?
    Thanks much!

    RabbitSF wrote:
    So my question is: Is there a simple way to just install the 3600 driver for the snow leopard?
    It all depends on the driver files used by the LJ3600. If it uses only a PPD, then you could simply copy the PPD to the /Library/Printers/PPDs/Contents/Resources folder for the Mac's that don't have the driver already installed.
    If there are other files required by the PPD, such as plugins and filters, these are probably located in /Library/Printers/HP. So you could also copy this folder with the PPD to the other Mac's to reduce your setup time.
    Hope this helps you.
    Pahu

  • HP Laserjet 4mp won't print with Snow Leopard

    My great Laserjet 4mp prints just fine with OS 10.5.8 but not with Snow Leopard (10.6.2) on my new iMac. Have spent three plus hours with senior level Mac Techs to no avail. The printer screen shows the correct printer and driver and indicating valid connection, but when attempting to print I get the message "Unable to print, try again in 30 secs". Since 10.6 doesn't have Appletalk, am unable to use it; techs have tried to use the 4mp driver supplied with Snow Leopard and also downloaded it separately from the web site. We (they) have also tried using all methods (IP, Daemon, and HP Jet Direct using Ethernet and Serial to USB connections). Techs have talked with HP techs and have no other solutions. The security system is off. Any suggestions are welcome! Thanks!

    I've read the threads and don't understand some, but I think we (the Apple support techs and I) have tried the ones I recognize. One new idea--in a reply to a similar post someone mentioned being sure to use additional data when using the IP address-- submask address or some such, I
    haven't been told to do this--should I? (I can get it from the printer readout if told what to get.) Also, in another post someone suggested deleting the OS 10.5.8 driver that was transferred when all the data from my old iMac G5 was moved over, saying that it would interfere. If true, how do I do that?
    What I really need is a stepwise instruction on which connection to use (Ethernet, Serial to USB, or parallel port are the only options); which protocol to use (IPP, Line Printer Daemon, or HP Jet Direct socket, whatever they are); what to put in the Address line (the IP address is the one used by Apple techs); what to put in the Queue line (techs said to leave it blank); what to put in Name and Location blocks, if anything; and what to put in the Print Using line (techs have unsuccessfully tried Autoselect, Generic, and the HP4mp driver selected both from the Select Printer Driver option and from the driver downloaded directly from the HP web site).
    I'd be grateful for this help or even advice on where I can get it! (With this new computer I still have free telelphonic Apple tech support but they've given up.) Thanks!

  • HP LaserJet P1005 not working with Snow Leopard

    Has anyone managed to get this printer to work with Snow Leopard 10.6? I have installed the latest drivers* from the HP website which BTW do not say they support 10.6 , see http://is.gd/2DfcE
    *Not sure exactly what the version number of the drivers is. The website says they are version 1.0.7, but when installed they show version 1.0.6
    I either get nothing coming out of the printer or an error "PrintJobMgr quit unexpectedly - This report will be sent to Apple automatically".

    From this web page:
    Here are some troubleshooting steps you can use if there is an issue:
    Ensure the printer is connected, has power, has ink / toner, paper, and no alerts on its built-in display.
    Network based printers should be on the same subnet; you shouldn't have to worry about this if your printer is on your home network.
    Use Software Update for the latest available updates.
    Delete the affected printer from Printer & Fax System Preferences, then re-add the printer.
    If the issue persists, reset printing system as described below, then re-add the printer.
    If the issue persists, contact the printer vendor and/or visit their website for printer software and support.

  • HP 1312nfi Multi-funtion printer & brand new Macbook Pro with Snow Leopard

    Hi,
    I just got my Macbook Pro with Snow Leopard May 2010. I can only print and fax with my 1 year old HP 1312nfi color laserjet multi-function printer. I cannot SCAN at all. I tried loading the software that came with the printer but it wouldn't install the 'Print Director' as I had on my old iMac (with Leopard). Then I went to HP and it said not to install the software that came with the HP printer because Snow Leopard has it all. I read that there are 3 ways to scan from my computer which none of them work. I brought up the printer then clicked printer setup and when I try to bring up the 'print utility' from the last tab, it won't open anything. Where is the printer utility now? Why can't I scan? There has to be a way. HELP please?

    Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3

  • Airport express printing problem with Snow Leopard

    I am no longer able to print to my shared printer after upgrading to Snow Leopard. I get a message that starts with "communication failure the computer is no longer able to communicate with your printer". My network consists of a dual-band Airport extreme and an Airport Express. The dual-band Airport Extreme creates the network and is connected to the internet. The printer (HP LaserJet 1012) is connected to the AirPort Express. The AirPort express joins the dual-band Airport extreme network for the sole purpose of turning the HP LaserJet 1012 into a shared wireless printer. Everything was working fine before the upgrade to Snow Leopard. When I connect the printer directly to my MAC via USB, it prints fine. I can "see" the printer fine through bonjour when it is connected to the AirPort express, but I get a failure whenever I try to print to it. I have tried plugging and unplugging the device. I have effectively redownloaded the print-driver by connecting the printer directly to my MAC. It sounds like a Snow Leopard bug. Any suggestions for a work-around? Thanks.

    I upgraded to Snow Leopard and had difficulties connecting to my HP Photosmart 7150 printer through Airport Express. Apple setup found a 3rd party printer driver by Gutenprint, which I downloaded and the printer works. But like it did under Leopard. Under the 10.5 OS, a print command would send a wake up signal to the HP, which automatically turned off after a period of idleness, and then print. Under 10.6, there is no wake up and I need to manually activate the printer. I went to the HP web site hoping to find a "new" driver for 10.6 and HP has posted a message saying it does not and will not be providing print driver for 10.6. It then has a long list of HP devices that cannot or will not print with Snow Leopard. So those with no-printing issues should check your model against the HP driver listing. I believe this is a neat way for HP to force Mac users who upgrade or install 10.6 to buy a new printer for which HP has a 10.6 driver. At least I can print and the only inconvenience that I can see if the lack of that wake up signal. My wife says it won't hurt me if I have to get up and walk to the room with the printer to turn it on!

  • I am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!

    i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
    When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
    Please HELP!!!!!! Getting second thoughts on Lion!!!!

    Hi b,
    Have you restarted yet?

  • Microsoft Office 2004 (Word) unable to save files  I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

    Microsoft Office 2004 (Word) unable to save files
    I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
    So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
    How can I get rid of this error message?

    Look, I realize you might have to get your machine working, so this is how you revert back.
    Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
    #1 Backup your personal data off the machine.
    Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
    Disconnect all drives now to prevent any mistakes from occuring.
    #2 Reinstall OS X 10.6 from disk
    Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
    Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk  of your internal drive  (do not format or erase!!), Quit DU and simply re-install 10.6.
    Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway)  or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
    #3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
    Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
    #4 Reinstall any non-working third party programs
    When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
    If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
    https://support.apple.com/kb/TS2570
    That's it really.

  • I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard.

    I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
    I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

    Dear Nathan,
    Many thanks. To the best of my memory, that is how I got where I am today. Initially I had one failed setup, then discovered compatibility mode and ran using it.  The result was not an obvious failure, but something was not there because not only were some drivers missing (wi-fi, trackpad, ...) but (much to my disappointment) the 3.1 update would not run. It complained that 3.0 wasn't there. If I hardwired to my home network, the machine would do almost everything I wanted, but the graphics were slow and clumsy. That is when I hunted around for the NVidia driver and downloaded it from NVidia. And that is where I stand now.
    My son found this link http://www.simplehelp.net/2009/01/15/using-boot-camp-to-install-windows-7-on-you r-mac-the-complete-walkthrough/
    which has instructions claiming to do the install straight to Win 7 without using compatibility mode.
    Given that my clumsy efforts to patch things up have probably necessitated a Win 7 deinstall and reinstall to test either your plan or the one my son found, I am inclined to sit tight for a couple of days to see  how much I can learn.
    I appreciate your interest in  this problem, and if you are up for reading the process at the link my son found and commenting, I would be grateful.
    In any case, many thanks, Paul

  • I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

    I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
    I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

    While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
    https://discussions.apple.com/community/windows_software/boot_camp

  • In Mail with Snow Leopard you could number your e-mails. Can this be done with Lion?

    In Mail with Snow Leopard you could number your e-mails. Can this be done with Lion?

    If you're referring to desktop icons, right click on the desktop > Show view options > check "show item information".

  • My Snow Leopard 10.6.3 has Safari 4.0.4 but this cannot be used for the new features of iTune.  I tried upgrading to Safari 5.1.7 but it needs Snow Leopard 10.6.8.  Where can I get a version of Safari 5.1 that is compatible with Snow Leopard 10.6.3?

    My Snow Leopard 10.6.3 has Safari 4.0.4 but this cannot be used for the new features of iTunes.  I tried upgrading to Safari 5.1.7 but it needs Snow Leopard 10.6.8.  Where can I get a version of Safari 5.1 that is compatible with Snow Leopard 10.6.3?

    Hi..
    here can I get a version of Safari 5.1 that is compatible with Snow Leopard 10.6.3?
    Not possible. You need to update to v10.6.8
    Click your Apple menu > Software Update
    Or update using the this download > Mac OS X 10.6.8 Update Combo
    Then restart your Mac.

  • I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard.  Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

    I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard.  Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

    Hi there,
    I found that Time Machine in Mavericks will sort it all out for you. You shouldn't need to buy another backup drive, unless you have insufficient space left and can't afford to delete whats on there. It should just work fine.

  • Is there a way to make Silverkeeper  work with Snow Leopard?

    I use a computer "given" to me by my school. I do have administrative privileges, but IT installs all OS software and configures it per the network on campus. Last February, they installed Snow Leopard and I began to restore all my files from my external backup. I'd been using Silverkeeper for years, I prefer the way it works (basically, it copies all files, then, with subsequent backups, can be set to only update changed files and add new files into the backup. In other words, there is only one folder. As a designer, I have the "v1,v2" so deeply ingrained in me that I never loose the early versions of documents). In short, Silverkeeper works for me. Time Machine is an interface that does not.
    So, IT installed Snow Leopard, I bring my machine home, and start bringing files over. For every single file, I had to type in my password. The drive, every folder and every document was suddenly marked as "Read Only". I tried changing permissions. Didn't stick. I repaired permissions, tried changing, still wouldn't take. I contacted IT, one of the guys opened Terminal and typed in something (he never gave me the line of code, so I can't tell you what he did. I asked him what he did, he just said, "It's ok, I just gave you full permission. Don't sweat it." I got home, tried to bring over some files, and they still asked for my password. Nothing had changed. Except that the machine started sending urgent error messages. I disconnected my hard drive, rebooted, and could not get past the grey screen.
    Even longer story short, IT wiped my computer, reinstalled SL, I brought in my hard drives, they worked with them to have them all "Read Write" again, and said I had to use Time Machine as a backup. They blamed the entire mess on Silverkeeper.
    So, the semester went on, I've been using TIme Machine ever since and I hate it. Hate it. I want my Silverkeeper, or some other such backup that gives me one file, and all my records kept in that file, in a visual manner. I hate these dates, with the multiple folders, and the threat that it will throw away old files (I just resurrected a file from a Quark doc made in 1994!). But IT has me too afraid to use Silverkeeper. Personally, I think something went wrong with the first install, then IT screwed it up even more by opening up Terminal and "fixing" the code, and they refuse to admit they have ever made a mistake. BTW, I've been using Macs for 22 years and have never experienced anything like this. I have done more system upgrades myself than I can remember, I have troubleshooted my own machines for years, and kept them humming beautifully.
    It's summer, and I want a different backup. Please help, or let me know if I dare brave my old favorite once again. If there is a utility that I have to buy, I will. I'm so fed up and frustrated with the interface on Time Machine, I'm ready to go back to the bad old days of manual backups.

    Are you using the latest version of Silverkeeper? - v.2.0.2 is stated to be compatible with Snow Leopard.
    http://www.lacie.com/silverkeeper/
    If it's messing things up you could try asking LaCie Support for assistance.

  • I have an imac with snow leopard. I do not have enough memory to get lion. I switched my  mail  to icloud and now my ipod touch has icloud.  i can receive mail on my ipod touch and through the icloud web site, BUt I cannot receive mail on my mac directly

    I have an imac with snow leopard. I do not have enough memory to get lion.
    I switched my mail  to icloud and now my ipod touch has icloud.
    i can receive mail on my ipod touch and through the icloud web site, BUt I cannot receive mail on my mac directly any more. There is an exclamation point on my mail in box and also an ! on .mac.
    Can anyone help me with settings so I can receive mail again directly on my mac?
    Thanks
    Mathmarv
    <Edited by Host>

    See this Apple note on troubleshooting icloud mail: http://support.apple.com/kb/TS4002
    You may have seen this page already: http://www.apple.com/support/icloud/mail-notes/

Maybe you are looking for