HP laserjet P2035 on airport express not playing nice with Windows

I recently bought a new HP laserjet P2035 and hooked it up to my network via the usb connector on an airport express 802.11n. The Airport Express extends my network created on an Airport extreme 802.11n dualband.
I have a MBP 13 and it prints fine. The problem I have is with two PC's. I installed Bonjour on both of them (one on Vista and another one on XP) and they started to print fine. The next day, only my Mac was able to print. Nothing changed whatsoever. Only that I turned off the printer for the night.
I checked and both Windows machines and the printers appear just like they did the day before.
Any ideas?

Anybody?

Similar Messages

  • Can I get an older release of Firefox? 36.0 does not play well with Windows 7.

    Firefox 36.0.4 does not play well with Windows 7. If it opens at all, it freezes within a minute so the screen goes pale and I get the classic spinning circle of death. Then the header says (not responding).
    Ideally I would like to drop back to version 32 or 33, but 34 and 35 had fewer problems.
    Can I find older versions anywhere?

    You can [[Install an older version of Firefox]] any time. But which will cause significant security risk. So If you can't use the latest version of Firefox, we recommend that you use the latest version of another browser.
    If the latest version of Firefox is causing problems for you or you just don't like something about it, please give us feedback about it here:
    [https://input.mozilla.org/en-US/feedback/ Submit your feedback and suggestions about Firefox]
    Anyway head for the ftp for older version but please be careful with these: ftp://ftp.eu.mozilla.org/pub/firefox/releases/

  • Why won't iTunes 'play nice' with Windows 8.1

    After following painstaking, tedious Troubleshooting hoop-jumping**, iTunes (latest version) STILL refuses to "play nice" with Windows 8.1
    Stalls out (Windows Task Manager reports "not responding") and does truly nasty things like blanking computer display and making Windows 8.1 system commands non-responsive (iTunes also has to be Forced closed ['End Task'] using Task Manager)
    My question:
    ANY HOPE that iTunes will EVENTUALLY actually work with Windows 8.1?? (Of course, there's NO '8.1' listed in drop-down menu, inspiring further confidence!)
    Adding INSULT to INJURY - Apple programmers DEMAND/FORCE creation of NSA-grade Password to Login to iTunes!!?!  (8 minimum, mandatory Capital and lower case letters, plus number(s), plus NO repeats, plus NO "common passwords" [whatever THOSE are] etc. etc. etc....ad nauseum)
    ARGGGH!
    ** Update iTunes, start in Safe mode, re-start (iTunes & Windows), check AV status, shut down AV & firewall, scan for viruses, check status of all drivers, all DLL's, any "possibly conflicting" applications [whatever THOSE are], create new User Account, etc. etc. etc. ad nauseum!
    At the risk of repeating myself ...  ARGGGH!

    Just checking that you've tried "iTunes Safe Mode" as opposed to "Windows Safe Mode"?
    Press and hold down CTRL+SHIFT the instant you click the icon that launches iTunes and keep holding until this message appears.
    Click Continue, then close iTunes and reopen. Some people seem to have had success with this approach...
    Alternatively, have you tried removing all iTunes components and then reinstalling as shown in the second box of Troubleshooting issues with iTunes for Windows updates?
    tt2

  • Airport express not playing music although the light is green

    I have been playing music from my macbook pro wirelessly through an airport express. The past 2 days ( upgraded to mountain lion but did that 2 weeks ago ) although there is not a connection fault and the airport express light is green there is no sound coming from the speakers but the music is playing on itunes... The airport utility doesnt report any problems...

    I have been playing music from my macbook pro wirelessly through an airport express. The past 2 days ( upgraded to mountain lion but did that 2 weeks ago ) although there is not a connection fault and the airport express light is green there is no sound coming from the speakers but the music is playing on itunes... The airport utility doesnt report any problems...

  • Older Airport Express not showing up in Windows AirportUtility

    I haver an older Airport Express, the kind that plugs right into an outlet.  It's plugged into ethernet, I'm trying to use it to set up a second home network and use it for Airplay.  It's too old to use Airport Utility on any of my Apple devices, but I have AU on a windows laptop to set it up.  I bought it off of eBay, so after I first plugged it in I used AU on the Windows machine to reset the ApExp to factory defaults, just to zero out any old user settings. The problme is that since then,  AU cannot find the ApExp!!
    If I look in Wifi settings on my iPhone or iPad it displays the ApExp, and selecting it gives me the error that it cannot be set up with this software (because it's too old), just like before...  but now, when I open AU the ApExp doesn't even show up! Even on the Windows machine, no Airport devices are found. The ApEx is plugged in correctly, and displays a flashing orange light, it has just completely vanished from Airport Utility... what's going on here??

    If you decide to keep the new AirPort Extreme, you will need  a newer "n" version of the AirPort Express if you want to try to extend the network using wireless only.
    A "refurbished" Model A1264 would work, but it will only extend one band from your dual band AirPort Extreme.
    A "new" Express, Model A1394 would be recommended since it will extend both bands.
    You do have the option to use the old AirPort Express, but that would involve using a permanent wired Ethernet connection between the AirPort Extreme and AirPort Express.
    Unfortunately, it is not possible to predict wireless performance in advance when the signal must pass through numerous walls and or a ceiling. For that reason, it would be a good idea to understand the store's return policy in advance if you want to try a new or refurbished Express.

  • Airport Express not seen / discovered by Windows XP machine

    I have an Airport Express connected to my wireless home network, mainly for AirTunes streaming. It was previously working fine on this network, but I had to change my wireless router and now can't get the Airport Express to be seen or discovered on the network by my Windows XP PC. This is a problem, since the XP box has all of the music I want to stream.
    I also have a MacBook, and this can connect to the Airport Express with no problems.
    As far as I know, I set up the new router with the same configuration as my previous one, but may have missed something that is well known to experts here. All other aspects of the wireless network are working fine, including other devices that connect to it, such as laptop, TIVO, etc.
    I have tried turning off firewall and virus software while trying to connect to the Airport Express. I also reinstalled the Airport Utility. None of those moves have made this work so far.
    Anyone have other suggestions on how to get the XP PC to "see" the Airport Express?
    Thanks!

    More detail on this.
    I am able to temporarily connect to the AE if I use "configure other" and enter the IP address and password. I can change settings, etc., but ultimately when I try to either "Update" or "Revert" it loses the connection and gives me an error [usually -6753].
    Have not been able to connect by direct ethernet cable connection, with firewall/virus scan off, resetting AE. Strangely, plugging in a USB wireless adapter to my desktop allowed it to connect to the airport - but I can't run my network with that installed on the desktop.
    Anyone have suggestions what else can be done here?
    Thanks

  • Setting up Airport Extreme to "play nice"  with Sony's LocationFree TV

    Hi,
    I have a PSP, an Airport Extreme and Express and a Sony LocationFree TV Base Station (LF-PK1). I had it all set-up and everything but had to reset my Airports (don't ask). Now, I can't get my LocationFree TV to work while on the go. If I connect through my home wireless network, it's all good. I think it has to do with Port Forwarding on my Extreme. I remember finding a great article on this website or forum but I can't find it anymore.
    Can you please help me troubleshoot this? I went on Sony's website (horrible, their site isn't Mac friendly) but couldn't find much help. Oh, and lastly, I would love to know if there is a Mac-compatible LocationFree player for Canadians. The one from Iogen is only for American clients... yikes!
    This forum rocks, thanks in advance guys.
      Mac OS X (10.4.8)  

    I think that you are referring to Steve Newstrum's User Tip "How do I use Port Mapping (Part I)".

  • PixelsPerPx does not play nice with customizing the Toolbar.

    I have a MacBook Pro and the screen has a very high number of pixels per cm^2. The screen is great, but the high pixel density often makes website text very small and hard to read.
    So, I used about:config to edit <layout.css.devPixelsPerPx>. Setting it to 1.1 or 1.2 "dumbs down" the resolution, but it makes things readable again. This is a great option - please consider adding it to Preferences or otherwise making it easy to use.
    Here is the problem: when I try to customize my toolbar (View > Toolbars > Customize), Firefox crashes.
    If I reset <layout.css.devPixelsPerPx> to 1.0, then I can customize my toolbar with no crashing. Apparently the PixelsPerPx option seriously conflicts with View > Toolbars > Customize.

    Dan White wrote:
    .. I agree 1000%, but the folks I am dealing with are among the more severely Technically Challanged. Asking them to do a software installation/upgrade is probably beyond their capability.
    ok, so YOU have to avoid any 'eye candy' that is beyond the abilities of THEIR systems/browsers..
    aside 'hard encoding' (=writing pure html manually.. pffffffff ) I would suggest the usual Rapidweaver.. it is CSS-based (=good looking) , but most templates (which you can modify for your needs & design) avoid Java, Flash etc. .. http://realmacsoftware.com/
    I'm actually stumbling into the same discussion with my 'clients' = other parents from my son's soccer team, I switched from Rapidweaver Design to iWeb + fancy flash animation/navigation (old/RW vs. new/iWeb+BannerZest) .. some friends with older Windows system get an alert 'new flash required' for the navigation bar on the sub-pages...
    not my problem, me web master..

  • Apple Mail in 10.8.2 not playing nice with MS Office 2011

    After upgrading to 10.8 I am having some issues opening MS Office attachments in Apple Mail.  When I click on any Word, Excel, or Power Point attachment I dialog box pops up stating "The attachment could not be opened....."  I can choose which application to use to open the document, cancel or save.  When attempting to choose the application, Office application are not available.  The only way to open the attachments are to save them and open from the saved location or through the application itself.
    Anyone running in to this issue or have an idea on how to sync up Mail and Office?
    Thanks!

    One thing springs to mind....
    Had you previously moved the folder "Microsoft Office 2011" out of the Apps folder? or moved any of the Apps out of the "MS Office 2011" folder to somewhere else?
    If so, try moving them back.
    Jerry

  • TS3899 Yahoo Mail is not "playing nice" with my iPhone 4S.

    I have tried everything including deleting my account and re-adding it.  Since yesterday, I am unable to send or receive messages from my yahoo account only when on the iPhone.  When I deleted the account it I received a message stating that I could "save" the account but would not be able to send/recieve from it.  What is going on with Yahoo!:iPhone??????????  I REALLY need this working!

    Yahoo has hundreds of mail servers. Trust me on this. The problem is Yahoo. Just because you can acces it from a web browser or in a client on your PC does not mean that you're hitting the same server you do with the phone.
    Your phone doesn't care what your password is. If it's being rejected, it's being rejected by the server you happen to be communicating with.
    All you can do is try removing and re-adding the account and waiting until it clears up.
    While you wait, set up a free gmail or iCloud e-mail account.

  • 3D games (Minecraft) not playing nice with Nouveau or Nvidia-304xx

    New to minecraft and 3d gaming on linux, got it up and running. With the nvidia-304xx driver, I can play a few minutes then it spikes the processor and I only get 0-3 fps (before it spikes I get 60-70). I tried various in game settings, from full graphics to minimal and nearly every thing in between. Read the wiki and it stated there were some issues with the driver and to update the LWJGL or just switch to nouveau. Updated the game libraries and had the same effect, switched to nouveau and it would crash after world selection. I found an old forum were they launched the game as sudo, thought I would give it a whirl, and it does launch. I am in the video and games group, so I don't know why there would be a permissions issue. Minecraft is the only game I play on this computer and would prefer to have nouveau working. Any help would be appreciated
    Last edited by bout10bucks (2013-06-02 02:34:01)

    /usr/bin/minecraft:
    http://pastebin.com/ssHQTSwL
    options txt:
    http://pastebin.com/awmMvAsw
    Graphics Card:
    http://en.wikipedia.org/wiki/GeForce_7_ … 950_Series
    (7950 gt; though mine is only 256MB)
    Minecraft log:
    http://pastebin.com/HQW24k6F
    System is a corei7 i920 with 6GB ram (desktop). Graphics card is the oldest thing in there but don't really play many games. Runs torchlight and psychonauts on full graphics with no issue. I did try updating to 1.5 prerelease since my original post to see if that would help (didn't). I noticed that the nvidia-304xx has an updated version in testing repo that I am going to try once I get a chance. It does seem that the higher I turn the graphics the faster it hits, so my current settings will give me about 10-15mins before dropping to 0-3 fps, full graphics gives me 30sec-2min, and every thing off gives me about 30min (but at that point all aesthetics are lost and isn't as fun to play)

  • Safari not playing nice with extensions, etc. since doing a "Reset Safari"

    So Safari's been giving me beachball a lot — dozens of times a day — sometimes just a few seconds, sometimes a minute or more, even on simple tasks like closing a tab, or scrolling (especially on a page with several images).
    I finally decided to try Reset Safari to see if I could kick it back into shape. While the performance has improved slightly, now I'm having other problems:
    - To open Preferences with a key command, I have to hit CMD+[comma] twice. The Safari menu flashes the first time, but nothing happens.
    - During some sessions — usually when Safari takes longer than it should (30+ seconds) to launch — several preferences I've added are missing: Safari Cookies, Safari AdBlock, and SafariSource.
    - Even when those added prefs do appear, I cannot reach Safari Cookies at first. I click on it, and it's highlighted in the preferences toolbar, but the pane doesn't change. I have to click on another extension, then click back to Safari Cookies to see the actual pane.
    - When I can reach the Safari Cookies pane, it doesn't work. Resetting Safari killed my Favorite Cookies list (arrrggghh!), but now no cookies are shown at all, ever, in Safari Cookies. (I uninstalled and reinstalled, and that didn't help. In fact, it made it worse, as now Safari Cookies says it's version number is 0.0.0.0 instead of 1.6.4).
    - I already chucked com.apple.Safari.plist. No dice.
    I'm stumped. Looking for help.

    Hi,
    several preferences I've added are missing: Safari Cookies, Safari AdBlock, and SafariSource.
    Many Safari users have reported problems using Safari Adblock. In fact, it's been the cause of Safari crashes. You can view the results of a forum search here.
    http://discussions.apple.com/search.jspa?objID=f876&search=Go&q=safari+adblock
    To remove that plugin go to /Library/InputManagers. Move the Adblock plugin to the Trash.
    Restart your Mac and try Safari.
    Get GlimmerBlocker. Compatible with Snow Leopard and Safari 5 and it's free.
    http://www.apple.com/downloads/macosx/internet_utilities/glimmerblocker.html
    If you still have problems with Safari after removing AdBlock, then uninstall SafariSource. That could be another source of the "beach balls"...
    Carolyn

  • HP Laserjet 1020 connected to Airport Express - Can't Print from Windows XP

    Hi,
    I have been using Airport Express for almost a year now, and it works fine with my old LaserJet 1200 connected to it, meaning that BOTH my ThinkPad(WinXP) and PowerBook(OSX 10.3) prints off the printer nicely. Last week I bought a LaserJet 1020 to replace the old printer. Now I can only print off my Mac, and not the ThinkPad.
    Here are some additional information:
    - Airport Express has been updated with latest updates.
    - Using newest printer driver available from the HP website.
    - New printer works when connected to ThinkPad via USB.
    - New printer works when connected to Airport Express and printing performed using my PowerBook.
    Therefore, My conclusion is that Airport Express and Printer is working just fine, and that it's just my ThinkPad not being configured correctly. (Although at the back of my head I am guessing that just MAYBE it's the Airport Express not accepting a different printer)
    This is what I did to install the printer from my ThinkPad to work with Airport Express (which is not working):
    1. Add a printer
    2. Local printer attached to computer (no auto detect)
    3. Selected existing TCP/IP port 10.0.1.1
    4. Selected my new printer driver
    5. Finish
    I also tried a few things like:
    - Deleting the TCP/IP port and creating it again before installing the new printer again.
    - Off both airport express and printer and on again after about 10sec.Airport was on first, and after the LED turn green, printer was turned on and USB plugged into airport.
    - Restarting my ThinkPad.
    I have tried everything that I can think of, and nothing worked... hence this posting to get professional help.

    Hi,
    You might want to download and install bonjour for windows to your Thinkpad it is how I got my roomates XP laptop to print on AX.

  • I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. any soln ?

    I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing wireless network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. I am using a set of speakers from kenwood connected to the airport express. The operating system on my macbook is mac os X 10.5.8. i am sure it is not a problem of streaming music online because i have even tried playing music which are stored in my macbook.
    Is there any problem with the setting in itunes or quicktime ? Kindly reply...... I am waiting for your valuable suggestion.
    Thank you a lot in advance.

    I am shocked to have found this same AX audio dropout problem starting TODAY, every few seconds the audio just drops for a couple seconds and then resumes:  Latest software versions of everything.  No iPad, iPhone or Touch.  Internet hardwired to D-Link DES1105 (1000baseT Switch) hardwired to new 80211N AX, AX optical to stereo, AX Wi-Fi internet to basic 1st-gen MacBook operating at 80211G, and an older 'G' AX extender at the far end of the house, away from all this.  The MacBook streaming iTunes is usually 12 feet from AX.  I've used this setup for years of trouble-free AirTunes / Airplay until today.  Today I also found 2 very reliable fixes and 1 way to force a dropout, but first, I read some posts and tried ALL following settings one-at-a-time and restored them ALL because NONE of them helped:  Turned off IPV6.  Streamed to multiple speakers 'Computer' and 'AX' (restored to just AX).  Turned off 'Ask to Join new (WiFi) Networks'.  Turned off Bluetooth (can't live without Magic Trackpad, so glad that wasn't it).  Here's my discoveries:  Lo and behold, each time I click the Airport icon in the Menu (you know it shows you've got 4 bars from AX) when the status switches to 'Looking for Networks' for a second it CAUSES the AX audio to drop out for a couple seconds (it never did that before today.)  iTunes still playing, streaming, AX laser still lit, but the 'PCM' light on stereo and the sound GOES OUT EVERY time I click the Airport icon in the menubar, just like the regular, annoying dropouts.  So, to reduce traffic I quit Safari (3 tabs, no streaming, just Gmail, Google, and Netflix browsing).  Lo and behold, the dropouts stopped altogether.  No other Web apps going (not iTunes Store, Genius, Ping, nothing), so I launched Chrome to the same 3 tabs and the dropouts HAVE NOT RETURNED.  That's right, not only did simply QUITTING SAFARI cure it, and Chrome doesn't contribute to it, but I can demonstrate it just by forcing my Airport to re-scan.  Works for me, written using Chrome.  The other reliable fix is to hardwire MacBook to the Switch.  This is obviously not ideal, but Airplay audio doesn't drop out over Ethernet.  Also, in all my tests, it made no difference whether iTunes did the streaming, or Airfoil did.

  • AirPort Express Not Able to Connect Wirelessly

    Hardware is iMac 2.4 GHz Intel Core 2 Duo with 4 GB 667 MHz DDR2 SDRAM.  Mac OS 10.6.8
    Connected to Internet via Motorola Surfboard SBG6580 Modem / Router, so I connect by wireless through the modem.
    I followed the installation instructions to install AirPort Express to play music on my home stereo.  I connected the Airport Express to the receiver by the tape port.  I was not able to install AirpPort Express via wireless mode, so I connected the iMac to the AirPort Express by CAT-5 hard wire cord.  The installation was successful and the AirpPort Express obtained an AP address.  I was then able to play music from iTunes pm the iMac through the stereo speakers...as long as the AirPort Express was connected by hard wire to the iMac.
    When I remove the CAT-5 cord from the AirPort Express, the AirPort Express retains the green light, but it is not able to receive data from the iMac.  To the contrary, the AirPort Utility is not able to find any AirPort wireless devices unless the AirPort Express is connected via the hard wire CAT-5 cord.
    As an experiment, I then connected the AirPort Express to the cable modem / router via the hard wire CAT-5 cord.  The AirPort utility on the iMac was still not able to find any AirPort wireless devices.  Further, the model then assigned a different AP address to the iMac so that it was not able to connect to the Internet..
    Meanwhile, the AirPort Express still retains the green light, indicating the installation was a success and that it is ready to transmit.
    Any advice to resolve this issue would be very much appreciated.  Thanks in advance for your thoughts.

    I suggest that you start by performing a "factory default" reset on the 802.11n AirPort Express Base Station (AXn) to get it back to its "out-of-the-box" configuration. By default, the AXn will broadcast an unsecured wireless network with a Network Name of something like: Apple Network NNNNNN
    After the reset has completed, plug the AXn into power, and then, verify from the iMac that this network shows up in the list of networks under the AirPort icon in the OS X menu bar. Does it?
    If so, then from the AirPort icon, switch your iMac to connect to the AXn's wireless network. Note: You will temporarily lose the Internet connection from your Motorola router. Then, run the AirPort Utility. The Utility should now find the AXn. If not, use the Utility's "Configure Other" option under the File menu option in the Utility's menu bar. Enter 10.0.1.1 for the Address and "public" for the Password.
    AirPort Utility > Select the AXn > Manual Setup > AirPort > Wireless
    Wireless Mode: Join a wireless network
    Network Name: <existing Motorola's wireless network>
    Wireless Security: <select the encryption type of the existing wireless network>
    Wireless Password: <enter the existing wireless network password>
    Verify Password: <re-enter the existing wireless network password>
    AirPort Utility > Select the AXn > Manual Setup >Music
    Enable AirPlay (checked)
    iTunes Speaker Name: <enter desired speaker name>
    iTunes Speaker Password: (optional)
    Verify Password: (optional)
    Click Update to write the new settings to the AX

Maybe you are looking for

  • Summary Report ... % not Diplayed in Chart

    Dear AdobeFormCentral Users, I have a Problem. In the Summary Report there are some Charts, where the deatiled discription (example 12% (44))  is lost if i choose "Data as percentage" and "Data as an actual count" in the options. If i choose only one

  • Why is iMac connected to TC at 130 Mpbs instead of 450 Mbps?

    Hi, I just noticed that my mid 2010 iMac 27" is connected to my 2nd gen Time Capsule at only 130Mpbs. I remember seeing it at around 450 Mbps or slightly lesser before my upgrade to Mountain Lion a couple of weeks back. The thing is, my TC is located

  • LMS 3.2 RME 4.3.1 Inventory Failing for Switches

    I have two 6500 Series switches that RME is not able to get the inventory for.  It keeps on failing.  I have tried to increase the SNMP timeout to a larger number also increased the telnet timeout.  I've seen it asked for in other posts.  Here is my

  • CVP file propogation

          Hi All, Does anyone know is there any possibility to propagate media files between multiple CVP Media Servers automatically? Here we could find a description that tells this is possible. But it seems to me after several tests with couple of med

  • Display Fields in JTable

    Hi I 've successfully created a JTable that connected to the MySQL databases that I've created previously. I am able to display the Table using Query like this : rs = stmt.executeQuery("SELECT * FROM commenttable where tradeName like 'P%'"); However,