HP LaserJet Pro 200 color MFP M276nw - Duplex / Legal

Can someone tell me how I can print duplex?  Once the computer prints out the page, it prompts me to flip the paper over.  However, I don't see a place for manual feed like my old HP Printer.
As well, how can I print legal?
THANKS!
This question was solved.
View Solution.

These are some great questions.  The M276nw laserjet does not have a manual feed slot.  One has to pull the paper tray out and place the printer page back in the tray to print on the other side for duplex printing.
* The information for this can be found in the manual for the printer, located here.  Take a look at pages 25-26.
Take a look at the picture below to get a better idea of how to use legal size paper in the paper tray.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Similar Messages

  • HP LaserJet Pro 200 Color MFP M276nw scan to mail with google.

    hello,
    i got a HP LaserJet Pro 200 Color MFP M276nw printer. and i want to use the scan to mail feature.
    But when i am setting up my google account as head account where the printer should send the mails from it doesn't work. i don't get the scan's into my mail. does somebody got a user guide for me how it is done and with the settings i have to use?

    Hi @dennieboy96 ,
    I see by your post that you would like to setup the scan to email. I would like to help.
    Are you trying to setup the scan to email from the printer or from the HP Software?
    I have included both documents.
    Scan From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) for HP Lase...
    Scan from Windows 7 With the Full Feature HP Software for HP LaserJet Multifunction Printers.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP LaserJet Pro 200 color MFP M276nw. The fax forwarding feature no longer will forward a fax.

    I am using the HP LaserJet Pro 200 color MFP M276nw.  Is it possible to forward the fax as a email instead of printing it out?  The current fax forwarding feature only supports forwarding to another fax number but not email.  If fax forwarding to email is not support, is there any other solution?
    Albert

    Hi @Albert1024 ,  I understand that you aren't able to forward the faxes. I can help you today.
    You can only forward that faxes from the printer to the fax number.
    Check to make sure the Fax Forwarding didn't get turned off and it is still showing the correct fax number.
    1.  From the Home screen, touch the Fax button.
    2. Touch the Fax Menu button.
    3. Touch the Receive Options button.
    4. Touch the Forward Fax button, and touch the On button.
    5. Use the keypad to enter the fax-forwarding number, and then touch the OK button.
    Turn off the Private Receive.
    1.  From the Home screen, touch the Setup button.
    2. Touch the Fax Setup menu.
    3. Touch the Advanced Setup menu.
    4. Scroll to and touch the Private Receive button, and then touch the Off button.
    Clear out the saved faxes, to make sure this isn't causing any issues.
    Go to Setup on the printer, Services, Fax Service and select Clear Saved Faxes.
    Update the printer's firmware. HP LaserJet Pro 200 color MFP M276nw Drivers.
    If you are still having issues, we can try a full reset on the printer.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Hp Laserjet pro 200 color MFP M276nw

    Im having an issue with the installation of the software and the scanning of the printer. When i try to do a full install it goes well up to the part where i have to reconnect to usb port to my computer, at that point the installation starts to go very, very slow. When it get to 99% it gives me a fatal error saying i have to restart my computor and do the process again. i have done it multiple times with no success. I followed by going online and getting the drivers from HP and did the installations individually. I am finally able to print. When i go to scan a documents i only get 3 options on the printer: scan to usb, scan to network and scan to wireless.  I dont have anyother options and i have downloaded the drivers for the scanner. I dont know what to do anymore.
    Thank you

    Hi @HPuser84,
    I will do my best to help you be able to scan with the Laserjet pro 200 color MFP M276nw printer.
    There are only 3 options from the printer to scan to, scanning to PC isn't a option with this model, if you want to scan from the computer, you would have to use the  HP Scan Software on the computer.
    I have provided a document for how to scan through the HP Software and from the printer's control panel.
    Scan from Windows 7 With the Full Feature HP Software for HP LaserJet Multifunction Printers.
    Scan From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) for HP Lase...
    If the scanning software and drivers still didn't fully install and you had the fatal error again, uninstall the software.
    Disconnect the USB cable first. Uninstalling the Printer Software.
    Then start the installation again, immediately follow the steps in this document after connecting the USB cable please.
    A Fatal Error Displays During Software Installation. Disregard the printer model. This should allow the software to fully install properly.
    Please let me know if you require any additional assistance.
    Have a fantastic day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP LaserJet Pro 200 color MFP M276nw - Printing problems with HPeprint App on Ipad mini

    Hi,
    my name is Domenico and I have the following problem:
    I have setup my HP LaserJet Pro 200 color MFP M276nw in HPePrint App on my Ipad mini, but I am able to print directly.
    When I send a page to print through my tablet, on the printer screen I can see the following message:
    "Manual feed.
    Plain, A4
    Or press [OK] to use available media"
    So, I have to press OK on the printer screen to print the page. 
    How can I avoid this problem?
    Thanks,
    Domenico

    solved!!!
    Domenico

  • HP LaserJet Pro 200 color MFP M276nw Wireless option is gone!!!

    I have a HP LaserJet Pro 200 color MFP M276nw.  The blue lit wireless icon used to stay on steady and all was fine for quite a while, then the Blue icon would start flashing like it lost it connection to the wireless router.  I would just recycle the power on the printer and let it reboot.  Usually it would connect with the router again but, it's been getting worse lately.  I figured I would try to the latest firmware to the printer as maybe there was a clitch with the original firmware.........Well, now I get no blue wireless icon and the wireless menu disappeared from the touch screen.  I tried to access the wireless settings in the web browser, the program said "this product does not support wireless connectivity.......WHAT?!!!!!  I tried a "cold reset" on the printer to clear everything and still have no wireless option.  I suppose its going to stick with the same firmware that was last installed.  I did notice that the printer lists itself with an "N" at the end of the model # on any printed report instead of the "NW" its supposed to be.  I did download the printer firmware from the Pro 200 color MFP M276nw support page.  it's acting like it now has the firmware for the non-wireless version of this printer.   This is the firmware I used
    file name:
    M276_colorMFP_Series_FW_Update-20140521.exe [1/1, 14.32M]
    .  Any Ideas how to fix this?  Seems like this is the wrong firmware for this printer.  Everything else appears to work ok.
    Bob

    ****UPDATE****  After running a few copies through the printer the wireless feature showed up again.  The printed reports started to show this printer with the "NW" at the end of the model number instead of just the "N".   After a few minutes it all went away again.  Seeing the correct model number show up for a few minutes made me believe the correct printer firmware is installed.  To make this a short story, I ordered the wireless PCA assy (Small internal wireless circuit board, HP part #1150-7940) and replaced it.  It's been working great for the past few days( since the board was replaced).   Apparently,  if the system does not see a working wireless board it defaults to the non-wireless model number and the wireless option disappears from the menu screen.  The other thing is there apparently is no fault code that covers this type of failure.....frustrating, to say the least.  I will update if this is not the fix but, it looks like I got it!
    Thanks!!!!!!!
    Bob

  • HP LaserJet Pro 200 color MFP M276nw - No Embedded Web Server (Port 80 not even showing open)

    The embedded web server on our LaserJet Pro 200 color MFP M276nw is not responding and a port scan of the printer shows that port 80 is not open. We have power cycled the printer and that did not resolve the issue. 
    Is there a way to check the status of the embedded web  server through the control panel on the printer? 
    Are there any other steps we can take to restore the embedded web server? 
    Thanks in advance. 

    Hello csandrews68,
    I see you have an LaserJet Pro 200 color MFP M276nw that the Embedded Web Server will not load, port 80 shows as closed.
    I suggest restoring the network defaults on the printer:
    From the home screen on the printer push Setup (wrench and gear icon)
    Go to and select Network Setup
    Push Restore Defaults
    With defaults restored, connect the printer back to the network and try to load the EWS.
    Let me know if that helped.
    Thanks,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Laserjet Pro 200 color MFP M276nw

    Can print all files except Adobe (PDF) which freeze the printer.  Have downloaded all relevant new software and still does not work.  Was able to print PDF files until recently when the problem started.  Supplier has not been able to solve the problem and cannot seem to get hold of anyone at HP who can help us.  Any ideas ?

    Hi Mariners,
    I understand you are having an issue with Laserjet Pro 200 color MFP M276nw and printing a PDF.
    In order to assist you correctly I would need some other information.
    What is the current OS on the computer?
    What is the model number?
    Have you installed the printer from the disc on the computer?
    Have you done a firmware update with this product?
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-108130-3&cc=uk&dlc=en&lc=en...
    Please feel free to contact me for assistance.
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Unable to install the scanner on the HP LaserJet Pro 200 color MFP M276nw in windows 7 64 bit

    HI 
    am unable to install   the scanner on the  HP LaserJet Pro 200 color MFP M276nw Drivers in windows 7 64 bit  , after runing the setup ,the printer will finshing the installation process and and it will show that the HP Scan and HP fax failed. 

    Hi @Chembo ,
    I see you're experiencing issues installing the printer software. I will do my best to assist you with this issue.
    I would disable all the start up programs and temporarily turn off the Antivirus Software and any Real Time Scanning in the Antivirus Software also, to see if that is causing the issue. How to use MSCONFIG . Click on the Startup tab and click Disable all, Then click the Services tab and check Hide All Microsoft Services.
    Restart the computer.
    Disconnect the USB cable from the printer.
    Run the uninstall from the CD.
    Go start, computer, right click on the CD for the printer, left click open in a new window, double click on uninstall.
    Make sure that the print spooler service is running.
    Right-click Print Spooler, and then click Properties.
    If the Startup type is set to Manual or Disabled, click the drop-down list, click Automatic, and then click Apply.
    Under Service status, click Stop and then Start, and then click OK.
    Run the installation again and don't connect the cable until prompted.
    Test the printer.
    Then you will have to go back and enable the Startup programs, Microsoft Services and turn the Antivirus Software back on again.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Laserjet Pro 200 color MFP M276nw, cannot air print

    Madam/Sir,
    How do I install air print on my HP Laserjet Pro 200 color MFP M276nw so that I may print using my apple devices (ipad, iphone). Currently I can only print through wireless connection which is 'moody' - doesn't print at times.
    Regards
    Rahul

    Hi,
    It supports AirPrint as shown:
        http://support.apple.com/kb/ht4356
    Please read on the first page of the above link:
    How to print in iOS
    You can print from Apple apps like Mail, Safari, Photos, Camera, Maps, Pages, Numbers, Keynote, and more. Many apps available from the App Store also offer this feature.
    To print, follow these steps:
    Tap  or  at the bottom of your screen.
    Tap .
    Choose your printer, the number of copies you want, and then tap Print.
    Make sure that you are on the same network as the AirPrint printer that you want to use. All AirPrint-enabled printers on the same network should be displayed, including those that are properly configured for a Wide Area Network (WAN).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP LaserJet Pro 200 Color MFP M276nw: cannot install on Windows XP Profession​al 64-bit

    Hi all,
    I am trying to install (via USB) the printing driver for my HP LaserJet Pro 200 Color MFP M276nw printer, but my operating system is Windows XP Professional 64-bit, Service Pack 2. The installer stops with an error saying that the system is not supported. Are there any basic drivers available to fix this problem, or do I necessarily need to upgrade my OS?
    Thank you,
    Alessio

    XP 64-bit is not supported. (see system requirements)
    Now is a good time to consider a O/S upgrade because of the end of life come April/2014 for Windows XP.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Hp laserjet pro 200 color mfp m276nw no print preview

    Hello Folks,
    I have windows 7 64 bit HP laserjet pro 200 color mfp m276nw and do not see a print preview option. Is there a way to get this? In Linux I use print to ps file and ghostscript to view. Our oldink jet had a print preview option. I did see a message for another printer that there is no solution. Any help would be appreciated.
    Thanks
    timkat

    Hi @Timkat ,
    I understand that you would like to know if the printer has a print preview option. I can help you.
    You would have to use the print preview, from the application that you are printing from, under File, Print Preview.
    Most applications have this feature.
    Hope this helps.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP LaserJet Pro 200 color MFP M276nw accidently plugged into 220V

    I bought an HP LaserJet Pro 200 color MFP M276nw printer from US (110V). The printer was shipped to India and was accidently plugged into 220V. This did damage the printer and now the printer would not start even on 110V. my questions are:
    1. is the printer still repairable?
    2. I can send the parts from US. if the printer is repairable, any guidance on which parts should be replaced?
    thank you for help.

    Hi @AKJ77 ,
    I read your post and see that the printer was accidentally connected to a 220v and you would like to if the printer would be repairable. I can help you.
    I have provided you with a link to the Parts Surfer website and HP Parts Store.
    Welcome to HP PartSurfer !
    HP Parts Store.
    You can call our technical support at 800-474-6836 for further assistance of a replacement unit. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Feel free to click the Thumbs up button below if this helps.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Touchscreen Laserjet pro 200 color MFP M276nw

    I have a HP laserjet pro 200 color MFP M276nw since 2 months. Since yesterday the touch-screen does not reacts anymore when I select an item. I just can touch the help icon, the home icon and the return icon. But when the touch screen is in sleep-mode I can touch in the middle of the screen and it wakes up.
    So I don't know if it is a problem with the touch screen or it is a setting.

    Hi @Netiv ,
    I see that you are experiencing issues with the touch screen not working on the printer. I will do my best to help you.
    With the cyan toner being low, shouldn't affect the display on the printer. It will just cause poor quality printing.
    Did you already try the hard reset?
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    The printer shouldn't be exposed to any electric or magnetic field.
    Try another power cord, you can use a monitor power cord to test it. Just to rule that out.
    I will send you another step to try in a private message. It may not work though if it is a hardware issue with the printer itself. In the forum beside your handle name just click on the envelope to view it.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • LaserJet Pro 200 color MFP M276nw/ a code 79 service error turn off then on, on screen the product

    I have an HP LaserJet Pro 200 color MFP M276nw. I keep getting a code 79 service error turn off then on, on screen the product

    I have same problem - this doesn't help. Did you did something that worked?

Maybe you are looking for

  • Printing problem with DocFlavor.SERVICE_FORMATTED RENDERABLE_IMAGE

    Does anyone use javax.print for printing ? I wanted to print the content of a JPanel, so a created a RenderableImage implementation, but my problem is that my EPSON Stylus Color C60 seems to not support this DocFlavor ! So I had to use a PRINTABLE, t

  • I lost all of my music during a sync! how can i get it back?

    I went to sync my iphone with itunes on my computer and lost all but 67 songs!! how can i recover them?

  • "SYSTEM ERROR" ABOUT WIFI CONNECTION

    Hello, Everytime I try to search for a wifi service, I get the following error: "System error" The only option I have is to press "OK" and it defaults back to the menu. My mobile est NOKIA E75 I can't connect my phone to internet when i try etablish

  • Can I exceed the license count on a 5508 series WLAN controller?

    Scenario: 5508 WLC licensed for 100 APs.  Currently have 78 APs on the controller. Two buildings coming online this week, but there was a snafu with purchasing and license upgrade still in progress. 92 APs total between them. I looked at the license

  • Contained DB best practices

    Hello! A standard procedure for converting an ordinary db to the contained one is as follows: http://msdn.microsoft.com/en-us/library/ff929275.aspx sp_migrate_user_to_contained @username = N'Barry', @rename = N'keep_name', @disablelogin = N'do_not_di