HP LaserJet Pro M1536dnf

My HP LaserJet Pro M1536dnfis printing with black vertical strips particularly along the left two-inches or so of the page. This occurs when printing a supplies status page directly from the printer, using regular 8.5x 11 inch copy paper (92 bright, 20 lb).
The supply page says that approximately the print cartridge is at 70% (660 pages printed, ~1100 remaining).
I also tried removing the cartridge and rocking it back and forth to redistribute the toner, but this had no effect.
The printer scans fine, this seems to be purely a printing issue.

Hi @fjksadl ,
I see that you are getting a black vertical stripes down the left side of the page. I can help you with this.
It sounds like a issue with the toner, fuser or hardware issue with the printer.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
This ensures the printer is receiving full power and may help this situation.
Are you using Genuine HP Toner?
Inspect the toner cartridge for damage:
1. Remove the toner cartridge from the product and verify that the sealing tape has been removed.
2. Check the memory chip for damage.
3. Examine the surface of the imaging drum on the bottom of the toner cartridge.
CAUTION: Do not touch the roller (imaging drum) on the bottom of the cartridge.
Fingerprints on the imaging drum can cause print-quality problems.
4. If you see any scratches, fingerprints, foreign objects protruding from the toner like plastic, sealing tape, or a blade, toner on the imaging drum, replace the toner.
5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem has resolved.
I have provided a document with some steps to try to see if that will resolve the issue.
Troubleshooting Print Quality Issues.
Go to Solution four: Print a Cleaning Page. Since the vertical lines are also appearing on the hardware test page.
Make sure the paper you are using is also supported.
Please call our technical support if the issue persists, if you are using a Genuine HP Toner, inquire about a replacement toner, at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Contact HP.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

  • HP laserjet pro M1536dnf wireless setup to use Air print

    Since I trying to print from my new Ipad Air, excuse my newbie networking printing questions!
    This what I know so far:
    1. I understand my HP laserjet pro M1536dnf is 'not' a WiFi  printer.
    2. As per HP Support and the Apple Support web sites, my HP laserjet pro M1536dnf is 'Air Print' enabled. I guess a certain firmware update must of incorporated the Air Print capabilty!
    3. As per HP Support web site, I currently have the latest firmware installed ( 20130815 ).
    Note: On my Config Report, it shows the status for both IPv4 and IPv6 as 'Network Cable Disconnected '. I have Show IP address as enabled.
    3. My home setup has the cable internet going from my cable modem to my wireless Linkys E3200 router via coaxial cable. From my router to my computer is wired via the Ethernet cable. My HP Laserjet 1536dnf printer is wired to my computer via USB cable.
    Questions:
    1.  Going from I seen and read on on-line, is correct to say 'I will have to change my Ethernet cable going from the router to the computer and change it to from the router to the printer's Ethernet port?
    2. Will I have to remove the USB from Printer to the computer?
    3. By removing the USB cable between the printer and the computer, how would my computer communicate to the printer to perform a print job? Unless, I'm guessing, I add another Ethernet cable between the router and my computer's  ethernet port!
    4. Any other tips, that I might have missed?
    This question was solved.
    View Solution.

    Hi,
    Based on the following list, your printer supports AirPrint:
       http://support.apple.com/kb/ht4356
    Therefore to print from your iPad, please use the following instructions:
    How to print in iOS
    You can print from the Apple applications, such as Mail, Safari, Photos, Camera, Maps, Pages, Numbers, Keynote, Filemaker Go, and so on. Apps available from the App Store may also offer this feature.
    To print, follow these steps:
    Tap or , which are at the bottom of your screen.
    Tap .
    Choose your printer, the number of copies you want, and then tap Print.
    Note: If you are printing for the first time, ensure that you are within range of your printer. All AirPrint-enabled printers within range will be displayed.
    Source: http://support.apple.com/kb/HT4356
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP LaserJet Pro M1536dnf Multifunction Printer (unable to add print driver hpfax1, error code 87)

    Hi, my printer HP LaserJet Pro M1536dnf Mfp, suddenly didnt work so i remove the printer, and downloaded a new driver  http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-Pro-M1536-Multifunction-Printer-series/3974271/model/3974278#Z7_3054ICK0KGTE30AQO5O3KA30R1 once dowloaded, i run it and uninstall the printer, restart my pc, and proceed to installing. but in the process of installing a error occurr, saying that "Unable to add printer, error code 87", and that " HP Toolbox FX has encountered an error and can not recover. once i click ok. it tells me to restart my pc and reinstall it again. i did it for 8x, and still with the same error. please help really need a help right now. as my boss is going to kill me

    Hey , Welcome to the HP Support Forums!
    I understand that you're getting the error 'Unable to add print driver hpfax1, error code 87' when installing your HP LaserJet Pro M1536dnf Multifunction Printer on your Windows 7 computer. I would like to assist you today with resolving this install issue. Thank you for including all of the troubleshooting steps that you have completed prior to reaching out for support. At this time I am going to walk you through some additional software and driver troubleshooting steps. Please follow all of the steps below.  If you're using your HP Laserjet through a USB Cable connection, please disconnect that cable now.  Step one: Remove Driver: 1. Click on your Start menu 2. Select Control Panel 3. Select Programs and Features 4. When Programs and Features opens a list of programs installed on your computer will populate. Click on the 'Installed ON' tab at the top to change the date so the recently installed items show at the top. This will make it easier to manually locate the three HP Laserjet items you need to uninstall.  5. Next, look for the HP LJ M1530 MFP Series HP Scan, HPLaserJetHelp_LearnCenter, and HP LaserJet Professional M1530 MFP Series. If you see any 3 of these, or all 3 of these items, please click on them and select Uninstall.   Once you have confirmed that those three items have been uninstalled, please close Programs and Features and proceed to the next step.   Step 2: Clear Temp Files:  Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.Close the Temp folder once it is emptiedRight click the Recycling Bin on your desktop and select Empty Recycling BinPlease proceed to the next step.    Step 3: Download Installer Package:  Please click here to download the Full Feature Installer package. Once the download is complete, click on the download to allow it to 'Run'An extraction should now automatically occur. Once the extraction is complete an installer window will open. Please close the installation window.  You do not want to run the installation at this time.   Step 4: Run Scrubber:  To ensure that no trace of the HP Software and Driver package remain on your computer, I am going to have you run a Scrubber built into the installer package for your printer.  Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens locate the 7z folder. Click on this folder to open it. This is the HP Laserjet Installer Click on the Utilities folder under the 7z folderDouble left click on Scrubber. It is an application which should launch the HP Uninstaller. Please follow the onscreen prompts to complete the uninstaller.    Once the uninstall has completed please proceed to the next step. Be sure to Restart your computer if the uninstall process prompts you to.    Step 5: Check Print Server Properties:  Click on your Start menuClick on Devices and PrintersIn the Devices and Printers window look for your HP Laserjet. If you see it listed please right click on it and choose 'Delete' or 'Remove Device'. Next, click on any device listed under 'Printers and Faxes' once just to highlight itClick Print Server Properties at the top of the windowClick on the Drivers tabLook for your HP Laserjet driver. If you see it click on it and click Remove at the bottomClick Remove Driver OnlySelect OKSelect Apply and OK on the Print Server Properties windowClose Devices and Printers. Please proceed to the next step.  Step 6: Run Disk Cleanup Utility: Click on your Start menuSelect All ProgramsSelect AccessoriesSelect System ToolsSelect Disk Cleanup Run a Disk Cleanup on the C DriveWhen prompted, check Downloaded Program files, Temporary Internet Files, Recycle Bin, Temporary Files, and Thumbnails Once the Disk Cleanup is complete, please proceed to the next step.    Step 7: Run CCLeaner:  To ensure that there are no malicious files on your computer or Registry conflicts on your computer I am going to have you run a CCLeaner before we install your printer. Please click here to download the CCLeaner Tool. Once the website opens select the link at the top for 'Free Download'. Once the download is complete please complete the Scan. Should multiple malicious files be found you may need to run the Scan multiple times to remove all malicious files. Once your system comes back as clean, please proceed to the last step.    Step 8: Install Device:  Please click here to download the Full Feature Installer package for your HP LaserjetOnce the download is complete please allow the download to RunPlease follow the onscreen prompts to install your HP LaserjetIf using a USB Cable connection please do not plug in the USB Cable until the installer window prompts you to  Once the installation has completed successfully please test your machine to confirm that everything is functioning properly. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

  • LaserJet Pro M1536dnf MFP ToolboxFX, cannot connect to the device

    Hi , I see you have put a great deal of effort into getting the ToolboxFX to work again, I'd be happy to help you with this. I found a post written by a colleague that I think might help. Please take a look at what  suggested to another user: Toolbox FX error. Please let me know if this helps, or if you require further assistance. Thanks.

    Hello, I am new to HP Forums.
    I have tried to search these forums for a working solution for my issue, without success.
    I apologize if I have provided too much information all at once. I see many people seem to have problems with the HP ToolboxFX software. Thanks to anyone that can help me solve my current issue. Product: HP LaserJet Pro M1536dnf MFP
    Model: CE538A
    Firmware Date: 20140630 (was 20100615) Computer: Dell OptiPlex 980 Mini-Tower
    OS: Microsoft Windows 7 Ultimate 64-bit SP1
    RAM: 8GB Background: ****
    We have a small quantity (4 via USB, 2 via wired Ethernet) of this model AIO printer in use here since 2010. I have never had any problems printing to or scanning from these printers. The HP ToolboxFX software DID function on my PC without issue until it was recently uninstalled.
    I have never tested the Faxing function of the printer connected to my PC, so I don’t know if that part of it works. The fax function does work on another (same model) printer installed on our network. Originally this printer was connected to my PC via the supplied USB cable and installed using the supplied HP software media (Installer v1.5.6.4020  I believe).
    My PC had a couple USB ports that did not work, and during the troubleshooting process, a second copy of this printer became installed and linked to a different USB port. I wanted to see if I could have HP ToolboxFX deliver faxes received on one of our networked HP LaserJet Pro M1536dnf MFP printers to my PC instead of another PC currently receiving these faxes. So I thought I would uninstall the printer and software on my PC and reinstall it using the updated software (Installer v3.0.3.5253) downloaded from the HP website. That is when my problems started. Problem: ****
    HP ToolboxFX seems to be running in the system tray, but when I right click the system tray icon and select “Open HP ToolboxFX”, I receive a popup error window. By the way, the printers name no longer appears in the right click context menu. **** Window content:
    Cannot connect to the device. Make certain that the device's power cord is plugged in, the power is turned on, and that all cables are properly connected. Check the Troubleshooting tab or product documentation for more information. [ OK ]  <---<<  Button Clicking the [OK] once displays the same popup window again. Clicking the [OK] button a second time opens HP ToolboxFX but shows my printer status as not connected displaying a red square with white “X” inside it. I can still print to and scan from this printer. It is only the HP ToolboxFX software that is not working. What I have tried to resolve problem: ****  o- I have tried uninstalling and then reinstalling the printer and software (Installer v3.0.3.5253), using USB.  Same “Cannot connect to the device” window. 
    o- Thinking the newer software might need newer firmware installed on the printer, I ran the “Firmware Update Utility” found on the HP website. Firmware version 20140630 successfully installed. 
    o- I uninstalled and then reinstalled the printer and software (Installer v3.0.3.5253), using USB.  Same “Cannot connect to the device” window. 
    o- Thinking the perhaps the newer software was the problem, I uninstalled (Installer v3.0.3.5253) and then reinstalled (Installer v1.5.6.4020, original working) the printer and software using USB.  Same “Cannot connect to the device” window. 
    o- Then I uninstalled (Installer v1.5.6.4020) and then reinstalled (Installer v3.0.3.5253) the printer and software using USB.  Same “Cannot connect to the device” window. 
    o- Wondering if this was a USB software issue, I uninstalled and then reinstalled the printer and software (Installer v3.0.3.5253), using wired Ethernet.  Still no problems printing or scanning. Could now access the printer using its IP address, but the HP ToolboxFX error changed.  Now the popup window contained a different error. **** Window content: HP ToolboxFX has encountered an error and can not recover. Please re-start HP ToolboxFX, or re-start your PC.  You will not be able to receive alert messages, or use other HP ToolboxFX features until HP ToolboxFX has been restarted. Windows version: Win32NT - 6.1.7601.65536
    HP ToolboxFX version: 006.015.01163 [ OK ]  <---<<  Button I believe clicking the [OK] button NEVER clears the popup window (or just makes it reappear). The normal HP ToolboxFX program window never appears. 
    o- As this was not helpful, I uninstalled and then reinstalled the printer and software (Installer v3.0.3.5253), using USB again.  Still no problems printing or scanning, but the HP ToolboxFX error remained the same.  The popup window still contained the following error. **** Window content:
    HP ToolboxFX has encountered an error and can not recover. Please re-start HP ToolboxFX, or re-start your PC.  You will not be able to receive alert messages, or use other HP ToolboxFX features until HP ToolboxFX has been restarted. Windows version: Win32NT - 6.1.7601.65536
    HP ToolboxFX version: 006.015.01163 [ OK ]  <---<<  Button I believe clicking the [OK] button NEVER clears the popup window (or just makes it reappear). The normal HP ToolboxFX program window never appears. 
    o- I then tried a forum posted claimed solution (follows).  This did not resolve my ToolboxFX problem but did reset the error window content and software functioning back to its original non-working state. Now I am back at square one. Printer still works but cannot use ToolboxFX at all. Posted claimed solution START: ****
    From pcwizard on  08-03-2012 08:52 AM
    Re: LaserJet M1536 ToolboxFX error Hi Maddie54, Try the following and see if it works for you;
    o- Please go to the following directory  C:\ProgramData\Hewlett-Packard\ToolboxFX\Settings
    o- Under this directory delete all the files in Settings folder.
    o- Then reboot pc and restart the printer. *This can occur when the IP has changed or the printer had lost communication and been re-connected. I am an HP employee.Posted claimed solution END: **** **** Window content:
    Cannot connect to the device. Make certain that the device's power cord is plugged in, the power is turned on, and that all cables are properly connected. Check the Troubleshooting tab or product documentation for more information. [ OK ]  <---<<  Button Clicking the [OK] once displays the same popup window again. Clicking the [OK] button a second time opens HP ToolboxFX but shows my printer status as not connected displaying a red square with white “X” inside it. 
    *-*-*-*-*- I noticed that the HP uninstall process leaves a large quantity of abandoned folders and files scattered on the file system. I can only imagine that it has done something similar to the registry files. I can only imagine that since I know ToolboxFX works on other PC’s and DID work on mine, at one time, there must be a way to get it to work again. Perhaps there is a better uninstall utility (or manual procedure) that can remove whatever is causing the ToolboxFX software to not work. I hope someone has some useful insight into this problem. Would be nice to use the HP ToolboxFX software to receive faxes from one of our networked printers.
    Thank you very much for your assistance.
    Paul 

  • LaserJet Pro M1536dnf Multifunction Printers - A 'Firmware Corrupt Ready 2 Download'

    LaserJet Pro M1536dnf Multifunction Printers - A 'Firmware Corrupt Ready 2 Download'
    I run firmware files named that M1530_Series_FW_Update-20120629 file from network in Win.7 Then Firmware Corrupt Ready 2 Download is appeared. All operation blocked, pls help?

    How was the printer connected to the computer? USB or networked?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • LaserJet Pro M1536dnf trouble sending fax...just says fax job added but does not send out

    LaserJet Pro M1536dnf trouble sending fax...just says fax job added but does not send out.  How do I repair?
    Thanks!

    Hi @LWest322 ,
    I see that you are having issues with the fax not sending the fax. I can help you.
    The settings would be under the Fax Menu button, Send Options, Send Fax Later.
    I don't believe there is a option though to turn it off or on, just to set the date and time.
    I can send you the reset for the printer in a private message, which resolve this issue.
    In the forum beside your handle name just click on the envelope to view it.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Hp laserjet pro M1536dnf printer error 30.0017, 41.3000, 49.1910 multiple time error

    my hp laserjet pro printer m1536dnf many time error code 30.0017, 41.3000, 49.1910 and scan time full black pache all image.
    please suggest me this problem
    regards,
    pravin

    Hello,  The 30.0017 error indicates a scanner motor failure, the 41.3000 is also associated to a beam detect error which are all print engine motor related issues.  The 40.xxxx error is a general fault error that can be related to the scanner/beam  issues your experiencing.  If the printer is under warranty, it can be repaired, and if it is out of the warranty period, a service provider can quote you a repair cost.
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • Laserjet Pro M1536dnf MFP - scanner not working

    I have just bought and installed an HP Laserjet Pro 1536dnf MFP. The copier and printer work, but I can't get the scanner to work. I have downloaded the software several times and triedn to install it, but it doesn't work. In the end it times out and says there is a 'fatal error'.
    Any ideas? The printer didn't come with a USN cable, so I am using the one from my previous HP printer. Do you think that could be part of the problem?

    Hi Watu-Na-Nuru,
    Thank you for providing that information.
    There should have been the 2 drivers listed. Not sure why it wasn't listed.
    How was the scanner listed in the device manager under imaging devices?
    I have provided some steps for totally removing the old printer software, so we can start over again.
    Disconnect the USB cable if you are using the USB connection and not a Ethernet connection.
    Remove Old Printer Drivers.
    I believe there is a scrubber on the CD to remove all the printer files.
    Open the files on the CD/utility folder/scrubber.
    Unregister and reregister Microsoft Windows Installer
    Click Start (), and then click Run.
    In the Open box, type msiexec / unregister, and then click OK.
    Click Start and then click Run.
    In the Open box, type msiexec / regserver, and then click OK.
    Reinstall the software again on a new account with Admin Rights.
    Create a new user account with Admin rights.
    How to create a new user account in Windows 7 and Windows Vista.
    If the issue persists, run the Microsoft Fix It Tool.
    Fix problems that programs cannot be installed or uninstalled.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, let me know.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Laserjet Pro M1536dnf TWAIN driver?

    Hi,
    I've got the M1536dnf on Windows 8 x64 and I was wondering if I can get the TWAIN driver without installing the HP Scan software?
    I have a scanning software with a custom scanning interface but with M1536dnf, it just shows the HP Scan software instead.
    Can I bypass the HP Scan software?
    Thanks!

    Hi chihku
    I understand you want to install the printer without the HP Scan Software.
    I would suggest downloading the Laserjet Basic Print and Scan Driver.
    Hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Adding wireless capability to HP Laserjet Pro M1536DNF

    I presently have an Hp Laserjet 3052 to which I do not believe I can add wireless capability.
    I am considering a Laserjet  M1535DNF. The spec sheet says that wireless can be added by using a separate
    accessory. Is this a reasonable purchase if I must have wireless capability?

    I figured it out.  I bought this printer specifically because the Apple web site said it was compatible to print with the iPad.  Well, it is if you connect it by ethernet to a router that is connected to a wireless router.  That's the only way you'll get it to print with AirPrint.  After hours of mucking around, I finally got it to work and the ONLY way is what I've described, at least right now.  And the wireless router must be on the same network as the one accessed by your iPad.  It is great to be able to print from the iPad. Good luck.  Sudsbrew

  • I have HP LaserJet Pro M1536dnf Multifunction Printer and my problem with eprint "Not Connected"

    i use eprint but after day show in site massage state Not Connected
    to solve this problem turn off printer or hp web services and tern on and it work 
    but same problem after some hour  show not connected
    how can printer connected all time ?

    Hey sfareg,
    One thing you need to check is if your internet connection is intermittent. If it is not, you can follow these steps to give the printer a better connection.
    1. Find your printer's IP address by printing a network configuration page.
    2. Type you IP address into the address bar of your web browser.
    3. Click on the network tab at the top of the page.
    4. Look at the left hand side and click IPv4 under wireless.
    5. Change the IP settings to Manual.
    6. Enter the printer's IP address, your subnet mask, and your routers IP address or default gateway in the spaces.
    7. Set the Preferred DNS to 8.8.8.8.
    8. Set the Alternate DNS to 8.8.4.4.
    9. Click apply.(You may need to refresh the page if it says processing for longer than a min and click apply again.)
    The printer should have a better connection now.
    Although I am an HP employee, I am speaking for myself and not for HP.
    If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

  • Print the scanned image LaserJet Pro M1536dnf

    After firmware upgrade fo version 20111215 to  20140123
    Having problems with print scanned image.
    The scanned image is printed blurry and small pixels.
    How to bring back the old version of the firmware?

    Hi Senja,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I see you are experiencing an issue with scanned images printing blurry and small pixels since updating the printer's firmware. I will be happy to help you.
    Unfortunately you can't roll back the firmware on the printer.
    I would do a power reset to see if that will resolve the issue.
    With the printer still turned on, disconnect the power cable from the back of the printer.
    Then disconnect the power cable from the wall outlet.
    Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
    I have provided a document for Troubleshooting Scan Quality Problems.
    Try making a copy to see if you have the same results.
    If you would like further assistance from me, please let me know the following results.
    What application are you scanning from?
    Does the scan look alright on the computer?
    Are you just having this issue printing the scanned image?
    What is the DPI of the scanned image set to?
    Thank you for posting on the HP Forums.
    Have a nice day.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Cannot install printer HP LaserJet Pro M1536dnf MFP in windows 10

    i dowload last driver
    http://ftp.hp.com/pub/softlib/software12/COL34693/Im-86005-4/hp_M1530_MFP_full_Solution_usb_n_w.exe when install Driver show this error  this details from Event windowsFault bucket 1777042165, type 5
    Event Name: CLR20r3
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: hpbcsiinstaller.exe
    P2: 3.0.3.5253
    P3: 4cf952f9
    P4: Microsoft.Practices.EnterpriseLibrary.Common
    P5: 4.1.0.0
    P6: 4905f4a0
    P7: 35b
    P8: 3e
    P9: IOIBMURHYNRXKW0ZXKYRVFN0BOYYUFOW
    P10:
    Attached files:
    C:\Users\xx\AppData\Local\Temp\WERF1BD.tmp.WERInternalMetadata.xml
    These files may be available here:
    C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_hpbcsiinstaller._12bc8c753bac5b4c5b7ee9ad17813c5642ac5e_00000000_142c117a
    Analysis symbol:
    Rechecking for solution: 0
    Report Id: db4411bc-3d02-11e5-9beb-70f395569ede
    Report Status: 0
    Hashed bucket: ca6f2bc78904b4f03c6fba89523a6d23   how can install scanner and fax network Manual until the HP upload driver compatible windows 10 and when update windows 10  show my printer, when i install update show this error

    please help

  • Help me, my all in one HP LaserJet Pro M1536 no longer makes copies and scans to pc

    Hello, I have a problem with my multifunction.
    When I make a copy or when I scan to PC, both the ADF glass, leaving only the black lines on white with no picture, no nothing. If printing from Windows, rather well.
    What could it be?
    He abandoned the scanner?
    Thanks and best regardsRaffaele

    Hi RafNewWorld,
    I see by your post that you are getting black lines while copying. You can't scan to the PC either.
    I can help you with this.
    I have provided a document to go through the steps to see if that will resolve the issue.
    Copies, Faxes, or Scans Have Vertical Black or White Lines through the Output.
    Here is a picture of the areas to clean the glass and white backing.
    Update the printer's firmware if the issue persists. HP LaserJet Pro M1536dnf Multifunction Printer Drivers.
    Select your operating system, click next, click the link for firmware.
    This printer doesn't have the feature to scan from the printer to the PC.
    You would have to scan through the software. Scan.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Laserjet pro m1536 and mac OS x 10.4.11

    Is there a download available for laserjet pro m1536 for mac os x10.4.11?  If yes, please let me know where to find it.

    Hi @A-Dub, 
    I see by your post that you need the drivers for 10.4.11. I can help you with this.
    Unfortunately, the drivers for this model start at 10.5 and up.
    HP LaserJet Pro M1536dnf Multifunction Printer Drivers.
    You would have to update the Mac to 10.5 in order to use this printer.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for