Hp mini 110 fatal error passcode

My s/n is CNU0074LL6 and i need the passcode it wont let me on it without it. Please help it will be greatly appreciated!!
This question was solved.
View Solution.

Hi,
Please try (lower case)
     e9l11xvkkg
or try 3 times and post the error code back
Regards
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • HP MINI 110 FATAL ERROR SYSTEM HALTED . [edited] .!!!

    HP MINI 110 LAPTOP FATAL ERROR SYSTEM HALTED .
    [edited Serial Number by Moderator]
    plz ANYbody SOLVE THAT PROBLEM. I HAV NOT OPEN MY LAP SINCE 3 MONths..

    Cowboys try. e9lo3qquu9 3rd letter lowercase L. 4th letter lowercase O. 6th  and  7th letter lowercase Q.  Use that code to go into the BIOS. Disable all passwords that are enabled. If asked for the CURRENT password use that code. If asked for NEW password just hit enter. If asked to VERIFY password just hit enter. Save and exit. REO  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

  • HP MINI 110 FATAL ERROR SYSTEM HALTED

    Hi, I have a HP MINI 110 and I forgot the password for bios.
    After three unsuccessful attempts on the screen appears:   FATAL ERROR SYSTEM HALTED CNU9459FB0
     s/n(Personal information removed by Moderator)  - p/n: VJ205EA#UUZ 
    Thank you
    Text translated with google
    This question was solved.
    View Solution.

    Hi,
    Enter:     e9lovqo8p1     ( 3rd character is a lower case L )
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Hp mini 110 fatal error CNU902222G

    When i try to enter my bios, i am asked for a password, which i didnt put on there myself. The code it gives me is CNU902222G and i cant find anything on that code. How can I bypass it and fix the issue.
    This question was solved.
    View Solution.

    Please try this Password = e9lo17777h
    Steps to be followed:
    1. Use the unlock code posted above to enter the BIOS
    2. Disable all passwords that are enabled
    3. If asked for current password - type the unlock code
    4. For new password, just press ENTER key
    5. Repeat the same for verify password column.
    6. Then leave the BIOS by saving & exit option to save the changes.
    Troubleshooting:
    Incase if the Password doesn’t work please try a Hard Reset as follows.
    1. Shut down the notebook
    2. Unplug the AC Adapter and then remove the battery
    3. Hold  down the Power button for 30 seconds
    4. Plug in the Power/AC Adapter (Leave the battery out for the moment) & Start the Notebook
    5. If you now see a password box, Please type the same Password I shared before and press enter
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • Hp mini 110-1126NR error fatal

    porfavor ayuda mi pc hp mini 110-1126NR no arranca me pide un passwerd no se q hacer m sale error fatal sistem halted

    Hi,
    Please try (all lower cases)
        e9lo7vgb7v  (3rd char is a lower case of L)
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hp Compaq Mini 700-Fatal Error System Halted CNU9122NHV

    Hi I us in my computer Linux Mint i think so but now i start my computer and get this message..
    Fatal Error System Halted CNU9122NHV.
    I am not so good in english are from Sweden..And i hope someone can help me..
    Thank you!!

    CNU9122NHV IS THE CODE FATAL ERROR. I am not from USA Or London..I can read and write better in Swedish my english is ok not to good! I hope someone here give rigth code to my computer...

  • Hp mini laptop fatal error code

    I keep getting fatal error code CNU9277JZ I don't know the password and can't get in it and my mother doesn't remember it.

    Hi,
    Please try (all lower cases):
        e9lo7xxw07 (the 3rd char is lower case of L and 9th char is a zero).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Mini 110 password error CNU9516LST

    Need Help with the BIOS Password
    <script id="overlay_tmpl" type="text/html">//<div id="<%= overlayId %>" class="_mp3rocket_overlay_style" style="left: <%= overlayLeft %>; top: <%= overlayTop %>; width: <%= overlayWidth %>; height: <%= overlayHeight %>"></div> //</script><script id="overlay_tmpl" type="text/html">// <div id="<%= overlayId %>" class="_mp3rocket_overlay_style" style="left: <%= overlayLeft %>; top: <%= overlayTop %>; width: <%= overlayWidth %>; height: <%= overlayHeight %>"></div> // </script>

    Try the following:
    e9loq3gkna
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Hp mini 110-1140 Fatal Error... System Halted. CNU94542R9 Need password to log on!

    HP MINI FATAL ERROR SYSTEM HALTED .CNU94542R9 . Need password to log on!
    Please  Anybody SOLVE THAT PROBLEM. I HAV NOT OPEN MY PC SINCE one year,  plz help me if you can?.
    This question was solved.
    View Solution.

    Hi,
    Good to hear it's Ok
    You can remove the need for a power on password as follows - use the code from my previous post where necessary.
    Shut down the notebook. Tap away at the esc key as soon as you press the power button to access the Start-up menu and then select f10 to enter the Bios menu. Use the arrow keys to highlight the Security tab and hit enter. Use the arrow keys again to highlight power on password and hit enter. Enter the current password ( use the code in my previous post ) and then for the new password, just leave this blank and hit enter - do the same for the confirmation field. Press f10, select to save the new settings and hit enter.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • System Fatal Error for Hp mini 110

    I'm getting the system fatal error code 2mc937djmh
    This question was solved.
    View Solution.

    try this (be sure type letter/number correct) > 74eofxtw4z
    Like my post? Click Kudos (thumb+) to show appreciation.

  • HP mini 110-1116NR laptop fatal error code CNU939DV7 askin for password

    Upon startup it asks for current password. When you enter it 3 times wrong it says fatal error code CNU939DV7. Ive tried every password on the help site but none were for the same fatal error code. Please Help!
    This question was solved.
    View Solution.

    Hi,
               Try the below code
    e9lofo1t6x         (3rd letter is L)
    "I work for HP."
    Please click the "White Kudos" star to say thanks for helping.
    Please mark "Accept As Solution" if my help has solved your problem.

  • HP mini 110-1116NR laptop fatal error code CNU9390DV7 askin for password

    Asks for password upon startup and 3 wrong entries says fatal error CNU9390DV7
    This question was solved.
    View Solution.

    Hi,
              Try the code
    e9lofo1t6x
    "I work for HP."
    Please click the "White Kudos" star to say thanks for helping.
    Please mark "Accept As Solution" if my help has solved your problem.

  • Hp mini 110 boot disk error after installing new hard drive and system recovery

    Need help,  HP mini 110 Windows 7 32 bit.  using my recovery disks I created i was able to recover to the old 160 gb hard drive.  After I installed new 320 Gig drive and used my recovery disks i now get boot disk error. Looks like system was installed on new drive. but will not boot to complete set up.

    If you use the recovery disk, your machine will restore to its default factory state. Try to reinstall the 320 GB you have if you want it to get back.
    Can't get enough of this Envy...

  • Error message during recovery reformatting hp mini 110-3030nr

    ordered the recovery usb for my hp mini 110-3030nr trying to format but when its trys to write recovery files I get this error message. copy file fails From: D:\preload\base.wim  To: C:\RM\Image\base.wim   Please help
    product number WQ809UA#ABA

    Hello mtkrass.
    Have you tried using a different USB port to perform the recovery?  The error refers to it having issues reading files so that would be a possible solution.  If you're still unable to get the notebook to read the files you need to contact HP Support again and let them know.  There is a possibility the image is corrupted or damaged.
    The number for HP Support is 1-800-474-6836 for US/Canadian customers.  If you're in another part of the world you'll need to visit HP Support Worldwide to get your region's contact information.
    Have a good day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • My hp mini 110-4100 F11 error!!

    my hp mini 110-4100 F11 error!!

    Hi zeroking, welcome to the HP Forums. Do you have more details to provide? Do you get that error on startup? Are you able to enter Windows? What operating system is installed?
    Which Windows operating system am I running?
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Maybe you are looking for

  • Envy 120 scanner

    Envy 120 all-in-one printer well within warranty (bought end of August 2014). Trouble: sudden fault of scanner. I got in touch with Scott of the Canada-USA on November 17, 2014, around 10:08 PM (italian time). He gave me all the instructions by thHP

  • Best approach for Item Views: Categories? Perspectives? Attributes?

    I've got three different types of documents: Policies, Standards, Procedures. Right now they are each given a corresponding category. I have one area where all documents of all categories appear in three custom search lists. I'd like to have a second

  • WLS 10.3.4: How to use OS authentication for JDBC Data Source

    Hello all, As a preface, I've tried searching the forum/Google for "OS authentication" and reading the WLS JDBC doc to no avail - if it's documented somewhere, a RTFM link would be much appreciated. I'm trying to set up a JDBC data source on WLS that

  • Apple HDV Codec

    Hi, I am using *Final Cut Pro 5.0.4* (FCP). I recently filmed a short film using 24p mode on a *Sony HVR V1U*. I now have *high-def 24p footage* which looks great on the LCD screen of my camera. I thought I could import footage using the *Easy Setup

  • A js problem or coldfusion one

    I want to display the items like if i choose 7 days from a list box, the price should automatically change to 20, if i choose 15 days, the prince should increase accordingly, well i try to achieve hrough the coldfusion code but i think i am wrong som