Hp mini 210 1010nr video card upgrade

i wanted to upgrade the video card? is this possible? also different people tell me i can upgrade to 2 gigs but others say 4g on the laptop? i also wanted to put windows xp professional on it and not use the windows 7 starter....if anyone has a bit if information please help

Hi:
2 GB is max on your notebook.
Here is the processor spec direct from Intel. Note the max memory size is 2 GB.
http://ark.intel.com/products/42503/Intel-Atom-Processor-N450-(512K-Cache-1_66-GHz)
You cannot upgrade the video adapter. It is soldered to the motherboard.
There is only one system board, so there isn't even another motherboard available with better video.
In order to install XP you need to slipstream the SATA AHCI driver.
Read this helpful guide below. Read the Intel section. Then use the guide to slipstream all of the drivers.
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/SATA-drivers-for-XP-solution-on-0x000000...
And being the nice guy that I am, I have attached the drivers you need to slipstream to get XP installed.
Paul
Attachments:
NM10 ACHI Drivers.zip ‏258 KB

Similar Messages

Help my HP Mini 210-1010NR PC

I don't know why but when I'm on my netbook it keep over heating when I'm charging it. It somethimes will over heat even when it not plug in to the wall. I check the fan and it is running at all times i had a fan to put under it but that don't help it turn my sreen blue. Does anyone know what could be making that happen?

Hi Darkfirepr,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Mini 210-1010NR and start up issues. Here is a link to troubleshoot the HP Mini. Before starting please disconnect all connected devices and cables such as Personal Media Drives, USB drives, printers, and faxes. Remove media from internal drives, and remove any recently added internal hardware.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP Mini 210-1010NR PC Not Booting

My sister found her HP Mini 210-1010NR PC recetly. She was using more her phone and a desktop. She ask me to check it but the computer don't boot. Don't give me any error messages or let me access the f keys options posted in another posts. When I turn it on make the regular noises and I can see a blinking white cursor like line. The computer use Windows 7 Starter (32-bit). I will like to make a factory restore to the notebook.
I try to order the System Recovery Kit for Consumer Notebook (2 Discs) but the system don't allow me.
Thanks

Hi Darkfirepr,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Mini 210-1010NR and start up issues. Here is a link to troubleshoot the HP Mini. Before starting please disconnect all connected devices and cables such as Personal Media Drives, USB drives, printers, and faxes. Remove media from internal drives, and remove any recently added internal hardware.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

DVI & ADC video card upgrade???

What can I get to replace the stock 64mb AGP card (at least I think it is) in my MDD Dual 1.42 machine. I currently run two Acrylic Cinema Displays, a 20" via DVI and a 17" via ADC...
Is ADC going to limit my options? If so, I can use a second ADC-DVI for the 17" monitor.
Any help would be great.
Thanx

Okay, so it sounds like I should "dump" the ADC idea.
Then an I looking for a card with 2-DVI or 1-DVI and 1-VGA ???
I've followed several of your discussions, but still need a little help with the Video Card upgrade education. Flashed cards kind of scare me, but are they okay to use? I don't know if I could tell the difference anyway. Asking a seller on eBay if it is in most cases won't get you anywhere either.
You've talked about the 7800gs card. Any others I could consider? I've read that some cards don't work in a FW800 MDD machine.
Domo

Mac pro 8 core 3.1 randomly freezes after video card upgrade

Hi,
I just installed an ATI 5770 as a video card upgrade, plugged my new LED cinema display 27 and everything seems to work fine.
Sometimes though, while working with Aperture I noticed the Mac Pro just freezes, although the mouse works, I cannot do anything and I'm forced to press and hold the power button for a reboot.
This happended randomly 5 or 6 times in a couple of weeks and only while working with Aperture.
Any thoughts? Anyone having the same issue?
Thanks for your reply.
Guido

Running Lion or SL?
Tried holding Shift key down and do a safe boot after those freezes.
Use Disk Utility from another boot media to repair your drive.
Do you have enough RAM? is Aperture library on non-boot drive? Does it have 30% or more free? more is better. Same for the boot drive which sholdk be small and 50% free.
Corrupt library. Corrupt preferences (if there were none before, there likely are now after those hard restarts, to data files and to the disk directories).

Video Card Upgrades

I'm looking to either upgrade or augment the vid display card in my (admittedly) older G5. It was my severance pay from my previous employer, and I still haven't been able to find a job, so my financial resources are a tad limited at the moment.
I've seen Nvidia Geforce 6600 128mb on Ebay and I was wonder if it's a suitable replacement for the 64mb card I've currently got. ATI is the manufacturer of the existing card.

Seems like you must have an early G5 but not sure which exact model, but one with AGP 8x.
There are a number of threads of others asking for video card upgrades. And there is a great hardware resource and database:
http://www.xlr8yourmac.com/
I think there is/was a 6800 Ultra also.
http://www.barefeats.com/radx800.html

Video Card Upgrade - A general consensus.

I have a 2.8x8 Mac Pro (2008). I want to upgrade the standard 2600. I will be using the new grahpics card only in XP, and change the cables back to the 2600 everytime when under OS X. So my question is:
1. Can I purchase any video card driver-designed for windows XP and expect it to operate normally, under XP? This is a MASSIVE gray area... hard to find sound information.
2. Some cards (Radeon HD 4870) are designed for the Mac Pro. These have special boxes that indicate Mac compatiblity, and normal box counterparts for the windows market. The cards themselves are identical in every way. Are the normal boxed counterparts actually identical with regard to OS X driver compatibility?
Couldn't find these answers in concrete on recent posts, so perhaps this can shed light to others wanting to upgrade.
Thanks,
Graham

Yes you can buy a video card that is designed for windows and use it in your Mac pro, for windows. I did this for a while with mine. The only 4870 that will work with your Mac pro is the one from apple, or a flashed one from eBay. The GPUS are similar the difference is that the Mac card has a larger ROM and uses EFI instead of bios.

G4 Video Card Upgrade Recommendations?

I have a G4 Dual Gig Quicksilver PowerMac. Motion will not run with the stock GeForce4 MX card, so I need to upgrade. My speciality is in audio, and I'm unfamiliar with the current crop of video card options. Does anyone have any suggestions on which card(s) might be best? ATI or Nvidia?
I also have a 20 inch Cinema Display with an ADC connector, it looks like I'm out of luck trying to find a card to work without an adapter, but maybe there's a solution I missed?
Thanks,
PowerMac G4 Dual Gig, Powerbook G4 15" 1.67GB Mac OS X (10.4.3) 1.5 GB RAM, ProTools HD Accel 2

the top of the line for your mac which is the same is mine is the newest ATI Radeon 9800 pro with 256 megs of video ram. i have the same card although i just had to send mine in for some warranty repair.
it works well enough considering the age of the computer. i can get decent operation with motion and the open gl with after effects is nicer than with the stock nvidia card. however, it does increase the noise level from the quicksilver substantially.
i had to install the original video card and i miss my radeon 9800!
you can also get a radeon 9600 with the same amount of video ram and these cards are tested and compared at barefeats.com

CPU & Video card Upgrade - Motherboard manual, GPIO switch settings, BIOS update or ?

According to the HP TouchSmart 600-1120 Desktop PC Product Specifications page the motherboard supports the following CPUs:
Motherboard supports the following processor upgrades:
Intel Core i7 820QM Quad Core (C)
Intel Core i7 720QM Quad Core (C)
Intel Core i7 620M Dual Core (A)
Intel Core i5 5x0M Dual Core (A)
Intel Core i5 430M Dual Core (A)
I upgraded mine with the Intel Core i7 720QM Quad Core. The two Quad Cord i7 processors do not have a GPU Video chip integrated on the CPU fab like the listed Dual Core processors, and therefore neccesate the need for an external video card.
According to the HP TouchSmart 600-1120 Desktop PC Product Specifications page the motherboard supports One Mobile PCI Express Module (MXM) socket MXM version: 3.0, type A.
HP offered the NVIDIA GeForce GT 230 1GB DDR3 MXM Video Card , part # 513184-001 as an upgrade option on HP Touchsmart 600's, one would assume you could simply purchase this video card, and with either of these "supported" CPUs Intel Core i7 820QM Quad Core or Intel Core i7 720QM Quad Core and you would be in business, but NOOOO, it does not work!
I tried it on mine, using the Intel Core i7 720QM Quad Core and HP NVIDIA GeForce GT 230 1GB DDR3 MXM Video Card. The display cycles through various colors, but does not actually provide a usable display. I can tell the system does boot into Windows 7 (you can hear it) , but you cannot see anything.
There's a bank of DIP switches on the motherboard labled GPIO, which I'd assume is Graphics Processor Input Output, and perhaps there's a switch combo to switch from the Intel CPU/GPU to the MXM slot GPU??? i
I'm unable to find anywhere a manual on the Pentragram motherboard, this may tell how to set said GPIO dip switch if that's what needs to happen?
HP HELP!!! Your site says the HP Touchsmart is upgradable to the above Intel Quad Core i7 and MXM Video card, BUT HOW?????

Hi,
I suspect the NVIDIA GTX 760 that you are using is expecting a different BIOS level in the motherboard. Most of the NVIDIA 760s that have experienced compatibility issues pretty much have been with HP motherboards that don't have version 8 or 80 BIOS level. The HPE h8-1075UK only has a version 7 BIOS level.
MSI has two "N" model NVIDIA GTX 750 and 750 TI graphic cards that have a switch to allow compatibility with legacy and UEFI BIOS PCs.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

600 watt power supply questions and video card upgrade questions

I am looking to upgrade to a Xfx Radeon 7970 Double D graphics card but i was wondering if the HP 600w psu that came with my Hp Envy Phoenix H9-1350 has a 8 pin and 6 pin Pci-e connector because that is what the Radeon 7970 needs. Also I am wondering if it will fit into the Hp Envy Phoenix H9-1350 because the case seems small but the card is only 9.3" long. I currently have an Amd Radeon 7670 but I think it is time for an upgrade but I am just not sure if the power supply has the correct power connections needed for the Radeon 7970.
This is the card I am looking to get:
http://www.newegg.com/Product/Product.aspx?Item=N82E16814150665
This is the computer I have:
http://www.bestbuy.com/site/HP+-+ENVY+Phoenix+Desktop+-+12GB+Memory+-+2TB+Hard+Drive/6890832.p?id=12...

I understand you want to know if the power supply will have the necessary connectors for the desired video card.
According to the specifications, it lists the case as a mini-tower which is on the small side. You may need to use a tape measure to find out exactly how much room the system has in regards to length. It has become much better, but other components (such as the HDD) were at the end of the PCIe slot limiting the length of a video card. Sorry I couldn't provide anything more specific. The manuals are somewhat vague as far as the internal dimensions and I don't have access to one to verify the dimensions.
Ordinarily, I can find more information regarding the power supply not that seems not to be the case here. According to this thread, the PSU has two 6 pin PCIe connectors. You would need something like this to convert one of the 6pin connectors to 8pin. As long as the PSU is capable of pushing enough watts, it shouldn't be an issue. The card needs up to a 500W power supply, so the 600W power supply should be just enough to cover it.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Video Card Upgrade for HP Pavilion Dv7 2040us

HI My Dv7 2040us has an ATI Radeon 4650 video card. I want to run some new games and I need at least 4860 to run them. I was looking around and it seems I need to get a new card and install it directly to my motherboard. This is all do able for me I just need to know which new card would be compatible with my model of notebook. If anyone knows which one or where I can begin to look for one I would greatly appreciate the info. Thanks!
This question was solved.
View Solution.

Hi:
The only way you can upgrade the video in your notebook is to replace the entire motherboard with one that has a better video solution.
However, when you look at chapter 3 of the service manual at the link below, you are already at the top of the mark regarding what video chip is on the available motherboards.
http://h10032.www1.hp.com/ctg/Manual/c01689926.pdf
So, you will either have to live with the status quo or buy a new notebook.

Video Card upgrade for HP Pavilion HPE h8-1256s Desktop

I wanted to upgrade my current graphics card which was an NVIDIA GeForce GT 620, the mother board is a H-Joshua-H61-uATX. I recently bought an EVGA GeForce GTX 750Ti Superclock. I unistalled the old drivers took out the old card, added the new one and when I started up my PC i would recive 3 beeps and a black screen. I did some research and found out that it may be due to the BIOS. There is no BIOS upgrade I can find and my BIOS vers is AMI 7.11, 4/28/2012. I would appreciate a list or a recommendation of compatable Video cards so I do not have to keep buying and installing these devices or if there is a new BIOS update.
Graphics card (Bought on Amazon): EVGA GeForce GTX 750Ti Superclock w/G-SYNC Support 2GB GDDR5 128bit, Dual-Link DVI-I, HDMI, DP 1.2 Graphics Card (02G-P4-3753-KR)

Hi,
The EVGA 750 will not work with a version 7 BIOS. Look under Windows 8 for BIOS version 8.19.
HP Secure Boot Windows 8 Topics Computer Does not Start After Installing a Video Card (Windows 8)
If you are running Windows 7 then I haven't seen a post on this forum indicating if the EVGA 750 will work when the BIOS version 8 is set to legacy mode.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

PSU and Video card upgrade for HP e9280t

Hello, I wanted to upgrade my PSU and video card. The PSU I would like to get is the SeaSonic S12II 620 Bronze 620W (http://www.newegg.com/Product/Product.aspx?Item=N82E16817151096&Tpk=17-151-096) but I wasn't sure if my computer could handle and hold the PSU. The video card I would like to get is the EVGA 01G-P3-1561-AR GeForce GTX 560 Ti (http://www.newegg.com/Product/Product.aspx?Item=N82E16814130604) but im not sure if my computer can handle this too. I have a HP Pavilion Elite e9280t CTO Desktop PC (http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&dlc=en&product=4066665) can someone please tell me if I can upgrade to the PSU and Video card?

Stuart, welcome to the forum.
The truth is, any video card that will run properly with the 300W PSU in the computer, will not be much better than the integrated video. Most newer mid-level cards require a PSU with a minimum of 400W watts. I have searched for other members many times without any luck. If you want to upgrade the PSU, it will give you far more options.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

K330 Video card upgrade question.

New to forum and was just about to pull the trigger on a new K330-77471CU (from BB). However, I read a customers comment saying that this unit only had an AGP port, no PCI express slots for upgrading the video card, can this be true??? Does'nt seem possible today. The desktop overall will fit my needs, but I want to make sure that if I elected to upgrade the video card someday, I could with the latest generation cards.

thanks for the reply Duck3. The above desktop is a new release for BB stores and features i3-2100 / 8mgs memory / 1 T HD. Not a high end unit by any means but one that you would think would allow the user to upgrade the integrated vid. card to a dedicated ........ hmmmm , I'm hoping perhaps a rep from Lenovo will jump in and clear this up so I can make a decision on this particular desktop. I highly doubt our local BB sales rep is going to know the answer to this. These things just hit the shelves here. And yes, the customer was giving his review of the above mentioned model he just purchased.

Video Card Upgrade question

I want to run Apple's new Apature program on my iMac. I currently do not have a video card that will allow me to run this program. Does anyone have any suggestions on the most versitile cost effective card for the G5. I also do a bit of editing and Photoshop.
iMac G5 1.8 Mac OS X (10.4.3)

Hi,
The iMac's videocard is soldered onto the mainboard and cannot be removed. Therefor, it can also not be upgraded.
Sorry to bring you the bad news

Hp mini 210 1010nr video card upgrade

Similar Messages

Maybe you are looking for