HP Mini 210-1102TU Wont Accept 2GB ddr3 no boot.

Goo day!
I recently bought this laptop HP MINI 210-1102tu
Specs
-atom n475
-1gb DDR3
-250gb hd
This is my replacement with my 1year old hp mini 110 n280.
My problem/our problem is this.
It seems we CANT upgrade the memory into 2gb ddr3 1066 single stick. i already tryd 2 Diffirent Brand Kingston and Team elite.
Store where i bought my laptop told me HP BIOS does not accept 2gb DDR3 only 1gb ddr3.
to HP team Please Release a bios that will support our hp mini 210 DDR3 variant to accept 2gb ddr3. since our old hp mini 110 accepts 2gb memory and some for the HP mini 210 DDR2 variant accepts 2gb.
Thanks im hopping for answer from HP. regarding this matter and release a new bios that will allow us users to upgrade to 2gb DDR3
Much thanks!
-Pao

Hmmm...interesting...Mini 210 with new Atom processors (N475) should support 2GB of DDR3 1333...
What is the BIOS version do you have?
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Similar Messages

Mini 210-3080NR dont accept bluetooth + wifi card from another HP Mini !?

i am have purchased one new HP Mini 210-3080NR and this have only wifi mini pci-e and need a bluetooth on this to use with my phones,i am have another mini HP models as > 210-1076NR and 110-3130NR and this 2 models have the same mini pci-e bluetooth + wifi card,i am removed the card from mini 110-3130br and put on my 210-3080nr and appears as refused hardware or imcompatible,but if put the card from mini 210-1076nr its Ok ! HP put different firmware on the same card for different models ? and have another doubt,the mini 210-3080nr not have socket for additional mini pci-e to put for example > broadcom crystal hd decoder !!!??? i dont understand this because this model have special sound as beats audio and design exclusive for this model but HP has cutted resources > no mini pci slot to additional card and not have bluetooth + wifi.
b.r.
wait for reply to have solution to conflict of cards.

Does the PC still have Windows 7 installed? Did you install the driver found HERE. In the intial post, it is not stated if the netbook had a similar card installed or not. Was this a replacement or an additon?
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

HP Mini 210-1094NR recovery

Hello, I need help now.
Trying to fix an HP Mini 210-1094NR running Windows 7 Starter. Boots up to the Windows Error Recovery screen which gives me two options.
1. Launch Startup Repair
2. Start Windows Normally
Well you can guess which one(s) don't work.
The repair option got stuck in a loop, hard disk light flashing once every 3 seconds. Left it for over 36 hours and it said it was repairing.
So it is hammered. Is there a recovery partition to access? I have the manual and it said to hit F11 or the Window button to access a possible recovery partition. However, these just bring me back to the Recovery screen with the same options that don't work.
Any help for this unit???
Thanks.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!
This question was solved.
View Solution.

For those interested. Installed a new disk and reloaded Win 7 Starter and used the Activation Key found under the bottom cover and the unit is back up and running! Upgraded the memory to 2GB and she runs pretty good.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Upgrade hp mini 210-1014TU,processor intel atom N450,ram 2gb ddr 2

Can I upgrade my hp mini 210-1014TU processor?

Fahmisahaka wrote:
Can I upgrade my hp mini 210-1014TU processor?
Hi,
The following link shows its specs:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01968363
You can't upgarde CPU unless changing motherboard (= buying new machine). You can't upgrade RAM to 2Gb because it only supports 1Gb of RAM, max.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP mini 210 and un2400 Qualcomm

Dear All,
did anyone try to physically install a Qualcomm un2400 3g card into an HP MINI 210 (1020)? Is it compatible with the internal shape of the machine? Does it use the back SIM card slot (behind the battery)?
I read about this piece of HW in various forums, but only related to SW installation, while I have a brand new HP mini 210 _without_ the 3g connectivity and I'd like to add this card to my machine (but only if it is compatible and can fit in the chassis).
Thanks, Alessandro
Alessandro Guarda
Senior system integrator
Coca Cola Hellenic Bottling Company
Italia

Hi
Please find the link given below might help you it very clearly says you can upgrade Memory upto 2GB on your unit.
HP Mini 210-2200ew PC Product Specifications
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

HP Mini 210-2100

HiOur HP Mini is a few years old. Know I can't start it up no more. The screen becomes black. I think, the memory has to be replaced.This are the dates of the memory: Manufacturer: PKI/KingstonSerialNr. 500A5A13PartNr. 9905469-018.AOOLFMemory Size: 2048 MBMemory Speed: 667 MHzMemory Type: DDR3Type Detail: Synchronous I'am searching for this memory, but I can't find it. I hope, somebody can help me. Thanks and kind regards,Thomas

This is the HP Part number for the 2 gig memory stick: 2-GB 621567-001 http://www.ebay.de/itm/2GB-DDR3-MEMORY-RAM-PC3-10600-SODIMM-204-PIN-1333MHZ-/230655741853?pt=LH_DefaultDomain_0&hash=item35b4274f9d Service Manual Page 46 If this is "the Answer" please click "Accept as Solution" to help others find it.

Mini 210-2007sl memory upgrade

Hello Sirs,
I wanted to upgrade my Mini 210-2007sl to 2Gb. The original memory was marked:
ELPIDA 1Gb 1Rx8 PC3-10600S-9-10-B1
I supposed some "flexibility" of the hardware so I bought a Kingston KVR1333D3S9/2G, but it doesn't work (screen stays black forever)
Is this related to number of memory chips installed in the module (8 for the original module, 16 for the Kingston part) ?
Could you suggest a compatible memory from Kingston ?
Thanks a lot,
Mario

Hi, Mario:
Here is the Kingston memory module you need for your notebook:
Search Results for: HP/Compaq Mini 210-2007sl
Memory upgrades:
KTH-X36S/2G
2GB DDR3 667MHz Single Rank Module
http://www.ec.kingston.com/ecom/configurator_new/partsinfo.asp?root=us&LinkBack=http://www.kingston....
Paul

HP Mini 210-4000 Blue Screen of Death PAGE_FAULT_IN_NONPAGED_AREA error

I've been up and down the Forums here with no specific luck, unfortunately, so I'm going to ask even if this has been queried and solved in another part of the site which I may have missed.
I am trying to sort out a friend's HP Mini Notebook, model HP Mini 210-4125sa. The machine started up well enough until a week ago, when it suddenly decided to blue screen.
The specific error message text displayed within the BSOD reads as follows:
PAGE_FAULT_IN_NONPAGED_AREA
TECHNICAL INFORMATION:
*** STOP: 0x00000050 (0x87E40000, 0x00000000, 0x92442B13, 0x00000000)
I can not boot past the Windows 7 loading screen - the load bar makes it two fifths up and that's it.
I had thought to try and recover the operating system, if at all possible, from what is apparently a recovery partition that is created on the HD ( i haven't worked with these machines before unfortunately), although i cannot figure how to get at this partition before the error hits.
Also, having attempted to download a piece of software from the HP USB Recovery Flash Disk Utility, i realise that it seems necessary to actually use this from the notebook itself, which is not possible.
Having started running the various onboard tests from the BIOS menu, the Hard Disk Test has just apparently failed (specifically the Hard Disk Optimized DST portion of the test), with failure ID GGBXXV-66A75U-MFPX0J-61VV03 (i'm not certain if this information is of value but am including it nonetheless).HP have not unfortunately been an awful lot of help as they wil only offer a one-off technician support call for forty quid, or to take the notebook away for repair, the cost of which is practically as much as the original cost of the hardware. I would of course prefer to try and sort this out myself but have hit a bit of a wall at the moment. Any suggestions would be fantastic, at this point.
This question was solved.
View Solution.

That hardware test for the hard disk is a dead giveaway of a failed item. A failed hard disk is a show stopper.
Hard Disk Optimized DST portion of the test), with failure ID GGBXXV-66A75U-MFPX0J-61VV03 (i'm not certain if this information is of value but am including it nonetheless) It is important information.
A corrupted NTFS volume (the hard disk) can also generate the " PAGE_FAULT_IN_NONPAGED_AREA error" stop message.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Replacement HP Mini 210-2006sa Keyboard in UK

Good day all.
Could someone please advise me where I can buy a new Replacement HP Mini 210-2006sa Keyboard in UK.
Thanks for your time.
Best Regards.

You need this:
For use in the United States #622344-001
The laptop was sold in the USA and there is an us keyboard but you are in the UK, am I right?
http://www.com-com.co.uk/hp/partlist/0048274.ihtml
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Help my HP Mini 210-1010NR PC

I don't know why but when I'm on my netbook it keep over heating when I'm charging it. It somethimes will over heat even when it not plug in to the wall. I check the fan and it is running at all times i had a fan to put under it but that don't help it turn my sreen blue. Does anyone know what could be making that happen?

Hi Darkfirepr,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Mini 210-1010NR and start up issues. Here is a link to troubleshoot the HP Mini. Before starting please disconnect all connected devices and cables such as Personal Media Drives, USB drives, printers, and faxes. Remove media from internal drives, and remove any recently added internal hardware.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP Mini 210-1010NR PC Not Booting

My sister found her HP Mini 210-1010NR PC recetly. She was using more her phone and a desktop. She ask me to check it but the computer don't boot. Don't give me any error messages or let me access the f keys options posted in another posts. When I turn it on make the regular noises and I can see a blinking white cursor like line. The computer use Windows 7 Starter (32-bit). I will like to make a factory restore to the notebook.
I try to order the System Recovery Kit for Consumer Notebook (2 Discs) but the system don't allow me.
Thanks

Hi Darkfirepr,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Mini 210-1010NR and start up issues. Here is a link to troubleshoot the HP Mini. Before starting please disconnect all connected devices and cables such as Personal Media Drives, USB drives, printers, and faxes. Remove media from internal drives, and remove any recently added internal hardware.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Install windows on my HP Mini 210-400, dont work because no driver?

Hello,
I tried to install a new Windows on my (titel) HP mini 210-4000, so if I start the installation and come to the Harddriver selection, pick a driver, windows said, that AHCI-driver are missing.
In the BIOS of this Netbook I can't change the Harddrivermode tho IDE, because I don't have this option......-.-
What have I to do now?

Try it again.
BTW..What is the complete product name and product number of your mini. At the end of what you posted there are characters missing. It helps us when we know the exact hardware configuration and we can get that from the product number.
This time use the installer to delete the existing partition create a new partition and format it as NTFS.
Download the Intel Rapid Storage software on another PC and extract the SATA AHCI drivers. You can use either Winrar or WinZip to do that. If you do this ,then you can install the AHCI drivers that you wanted to install before at the F6 install drivers stage of the installation. You will have to go into the registry and check a specific key later on after the install.
You may have to do this a couple of times til it works. Sometimes it takes practice. It is actually pretty simple to run a dual boot of Windows 7 (32-bit) and Linux (Ubuntu)
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I have an HP mini 210-214 dxpc want to install drivers for hp officejet G85 printer

Help I'm at wits end I need driver (s) for hp officejet G85 all in one printer installed in my hp mini 210-214 dxpc with an upgraded windows 7 ultimate os in it.i've done everything i can find on hp website, the wizard finds the printer but no driver, windows can't find the driver, hp says its in my os already as a __os driver i cant find it or get this going been doing this for10 hrs now please somebody make it simple for me to install the necessary driver or whatever it is i need to do to get this printer operating from my laptop. oh this is through a usb connection if you need to know that.
thank you for helping

Hi @GoddessDiamond,
Welcome to the HP Forums!
I understand that you are trying to install drivers for your HP Officejet G85 printer on Windows 7. I am happy to help!
Please take a look through this installation guide, Installing the Printer Driver Using the Windows 7 Built-in Solution for a USB Cable Connection.
Otherwise, if that does not work, you can try to download the Windows XP driver, HP Officejet Basic Software and Driver, and run it using compatibility mode. Make older programs run in this version of Windows.
If neither of those two options work, then the last step is to try an alternative driver, please see this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by @Shane_R.
Hope this information resolves your issue, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Problems connecting 1 monitor and 1 TV to 2gb DDR3 AMD Radeon 7570 video card.

I recently purchased an Hp h8-1360t computer with a 2gb DDR3 AMD Radeon 7570 video card and an Hp 2711 LED monitor. I am having problems connecting both the monitor (dvi) and a 50" Sony LCD TV (hdmi) with a 50' hdmi cable. When starting the computer, once the initial Win 7 boot up is finished, the monitor screen goes blank, except for the mouse pointer. When I turn on the tv and select the correct input source a normal Win 7 screen with icons appears on the tv. Only the wallpaper picture displays on the monitor and no icons. If play a dvd movie it will only show up on the tv with the sound coming from the speakers attached to the computer.
I would like to retain control of the computer using the monitor. I tried to set the monitor up as the primary display source using the monitor configuration menu,but it won't allow me to save the dvi connection as the primary display source. The documentation that came with the computer and what I was able to find on the Hp site is lacking....to say the least.
Any assistance with this problem will be greatly appreciated.
Thanks,
Tony

First I would disconnect the TV HDMI cable from the computer. That should return the PC screen to normal. May have to reboot to get normal. Then reconnect the TV HDMI and go into the screen setup routine, paying attention to which screen is supposed to display what information.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Can anyone help with my Mini 210 Bios Password

Can anyone help with my Mini 210 Bios Password
master password after enter 3x comes CNU9491VLG
Thanks in advance

Hi,
Please try (all lower cases):
e9lovo36kh (3rd char is lower case of L).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Mini 210-1102TU Wont Accept 2GB ddr3 no boot.

Similar Messages

Maybe you are looking for