Hp Officejet Pro 8500 Q910a looks like it is printing and copying but pages come out blank.

Hp Officejet Pro 8500 Q910a looks like it is printing and copying but pages come out blank. I have used genuine HP cartridges. All four cartridges have have over 40% ink levels as per Self Test Diagnostic page.Printhead diagnostic says the print heads are "GOOD". Scanner  works fine.  Self Test Diagnostic Page prints in PINK color.Print quality TEST does not have black print on page.Printing and phot copying all come out blank.HELP.

Hi Equi_nut,
Do you have the same printer as the user above? 

Similar Messages

  • HP Pavilion dm4-1160us not interfacin​g with HP Officejet Pro 8500 A e All-in-One Printer A910a

    HP Pavilion dm4-1160 us Entertainment Notebook stoped pring with HP Officejet Pro 8500 A e All-in-One Printer A910a
    Operating System is Microsoft Windows 7 Home Premium (64bit) Service Pack 1
    How do I get the printer working again?

    Hello white2012.
    It would help knowing how the printer is connected to the computer (USB, Ethernet cable, Wifi).
    Is there any error message shown in the computer or in the printer?
    Cheers!
    Wixma.
    I am an HP employee.
    Say thanks by clicking the Kudos star in the post.
    If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

  • HP Officejet Pro 8500 A910 - all new ink cartridges​, black and blue ink not printing?

    HP Officejet Pro 8500 A910 - all new ink cartridges, black and cyan ink not printing?
    Cleaned printer heads w/no luck.

    Welcome to the forums @corAtrum1 ,
    I read your post about your Officejet 8500 no longer printing in black and cyan ink. I would recommend that you try out the steps in the guide below for this problem.
    I hope this helps!
    Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
    Have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Officejet Pro 8500 A909g All-in-One series, Printer Won`t print

    The printer will not print from my computer running windows 7- 64bit.  I am connected wirelessly through a Lynksys router with both the computer and printer, Howerver; I cannot get the printer to print from the computer. I have tried reinstalling the software from the cd that came with the printer and I also downloaded and installed the most up-to-date software and  drivers from the HP site. Occasionally the printer will print out a job, but only when the computer is shutdown and restarted or sometimes after sitting in queue for a long period of time, but neither of these always work. I`m stumped.....

    Hi FGG,
    I understand you're missing a driver for your Officejet Pro 8500 printer. I'd be happy to help you with this!
    If you click here you can download the full software package for your printer, including the drivers. Just click next when the page loads (it should be able to detect your operating system) and then scroll down to where it says Driver - Product Installation Software, and proceed to download the HP Officejet Pro Full Feature Software and Driver. I recommend saving it to your computer to make things easier as well.
    If this was not what you're looking for please let me know more specifically what the issue is.
    Hope this helps, have a great day!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • HP Officejet Pro 8500 A909a Series email address to print from an ipad

    Where do I find the email address for my HP Officejet Pro 8500 A909a Series so I can use my new HP app on my ipad for printing from my ipad to my printer?
    Tina
    This question was solved.
    View Solution.

    The A909 series of Officejet 8500 printer's don't work with ePrint. You can use the ePrint Home and Biz app for Android and Semien devices, or the ePrint app for iOS devices. You cannot, however, use ePrint itself. Sorry for the confusion. Below are links to the ePrint Mobile apps compatablity list and FAQ. Hope that helps.
    Supported Printers for the HP ePrint Mobile App or HP ePrint Home & Biz:
    http://goo.gl/sVIG8
    HP ePrint Mobile Apps FAQs:
    http://goo.gl/33WFq
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • HP Officejet Pro 8500 A909g Wireless - Can't Clear Print Que - Vista SP 1

    I have an HP Officejet Pro 8500 A909G Wireless printer which is set up wireless through a router.  Used to be able to print to this printer from any computer in the house except now.  I tried to print a document from my HP Pavilion laptop to the printer; it didn't print.  I tried multiple things, didn't work, so tried cancelling the document from the print que.  For 2 days now it has the print que has showed this document as "deleting", pages 6/2, shows date and time of request to cancel print job.  I went into Control Panel, right-clicked on the printer and chose "cancel all documents" and the print que still shows this document as deleting.  No ability to cancel printer job from the physical printer itself.  I've tried restarting the computer to see if it would clear the que; it doesn't.  Read through previous posts and tried several of the suggestions; nothing works.  Can no longer use this laptop to work and print.  HELP!  Vicki

    I have had to delete the printer, search for it again, and re-install it!

  • HP Officejet Pro 8500 A909g series wireless is only printing pink after all inks have been replaced

    I have changed all ink cartridges twice and it is only printing print and not entire page.  I have cleaned printhead, replaced all cartridges twice, aligned.   Shows on screen that all ink cartridges are full except on upper corner it is showing ink 1/4 full.

    Hi @vspivey,
    I understand your printed output is pink instead of black despite your efforts so far. I would be happy to help you from here.
    Although you have already cleaned the printheads, and changed cartridges, the following document might be helpful; Fixing Print Quality Problems for the HP Officejet Pro 8500 Premier (A909n) and 8500 Wireless (A909g....
    If the issue persists, you might consider calling us. We can check the price and availability of replacement printheads, and/or discuss the option of a newer printer model. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    Best of luck!
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Officejet Pro 8500 A909a - setup can't find printer, HP Network Diagnostic does

    Windows XP SP3
    HP Officejet Pro 8500 A909a CB022A
    DLM1FN1006BR
    I have been fighting with this printer for the past week, put at least 40 hours into trying to fix this alone. I will never buy another HP product for my office again.
    Windows can find the printer on the network. HP Network Diagnostic can find the printer on the network. But the latest version of the installation for the printer, that I downloaded from the website last week, refuses to find the printer on the network. I would do this without the HP software if I could but I need the functionality of hitting the scan button on the printer and it converting those scanned documents to PDF. 
    Here's a list of things I've tried:
    Finding the printer by IP in the setup (doesn't find it)
    Using the HP Scrub tool for this printer at all levels (L1-L4) MULTIPLE times followed by deleting the files in %temp% and then reinstalled the full software package. 
    Disabled all services and startup items.
    Disabled the Windows firewall. Tried with Windows firewall installed as well.
    Restarted the HP services in services.msc
    Updated MSIEXEC.
    Un registered Re-registered the msiexec
    Re-registered ATL.dll
    Ran subinacl to make sure all permissions are set properly.
    What I don't understand is why the HP Network Diagnostic can find it and the install can't. It seems to me that without installing all the HP software, I have no way of using the scan button to scan documents - the scanner just says "Select Computer" followed by "No Scan Options". 
    Can anyone tell me what I've missed in troubleshooting?

    Bump? Anyone have any sort of advice? Or is everyone seeing that I've followed every step in the HP Support site and nobody knows what else to suggest?

  • Officejet pro 8500 a909n Unable to locate - The printer is not connected

    Something, unknown to me, must have recently changed with my printer and or my iMac and MacBook Pro.  I was suddenly unable to print.  When I attempt to print I get this icon on the dock:
    I then click on the icon and this is the window that is displayed:  
    I completed a #6 restart and restarted the computers.  I had no problem establishing a connection with the router, which is a Time Capsule.  On the OSX Printers and Scanners Page I initially had a green light, but after attempting to print the light changes to amber and states "in use Last Used".  If I turn off the wireless radio, I can connect using USB, but prefer to use wifi.  However, after I walk away from the computer for awhile and then come back to print I get the same message.
    Is there something I can do to fix this.
    Information
          Printer:
                                     Officejet Pro 8500 Premier (a909n)
          Computers:     iMac (fall 2013)
                                     MacBook Pro (2012)
          Operating System:
                                      OSX Mavericks
          Print Driver:
                                      HP Inkjet 3 Driver 4.1.0

    Hello there @UncleMonkey ,
    I read your post about the printer loosing it's connection and not printing or communication with your Mac.
    I have a suggestion for you!
    Click this link, and follow these steps. I have heard much success in this guide and hope it works for you too: Printer Does Not Maintain Wireless Connection
    Best wishes
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Officejet Pro 8500 Wireless (Vista x64) Will not print after Sleep Mode

    Hello,
    As the title says the printer does not print after coming back from sleep mode. Before entering sleep mode the printer works fine and is responsive. After coming back from sleep mode the printer is still responsive (buttons on the touch screen can be pressed) but unfortunately does not accept any print jobs. Currently, I restart the printer to get it to print. It is connected wirelessly through WRT610N Linksys Router. Any suggestions or solutions would be greatly appreciated.
    -Artem Durytskyy

    I have been having the same problem all during my warranty period. But no one ever told me it was a firmware problem until two days ago connected to the sleep mode for the wireless one. Supposedly, they have downloads for wire ones now online which I found for 909a and 909b, but not 909g which is wireless. Now I am out of warranty and they won't replace it. I have a long history with tech support since early 2010. Right now, they are sending me a power adapter to try, said to turn off sleep mode (which I dont' know how). Then I told them I found online a firmware download, Apr 2010 to update firmware. My current version is different that the one listed for the download. So, I'm going back to TS to have them fool with it. Has anything worked for you?
    Officejet Pro 8500 Wireless, A909g. It's been a problem from the beginning

  • HP Officejet Pro 8500A Plus requires resetting between each print or copy task

    HP Officejet Pro 8500A Plus  or  HP Officejet Pro 8500 A910
    Windows 7 Home Premium operating system
    Problem:  
    Upon receiving a print command, the printer remains silent and displays "Now Printing" on the printer screen.  Nothing happens -- it does not print even after waiting several minutes.  Seems the doc is locked in the que.  Only temporary solution thus far is to cancel the print job and then hold in the power button for 30 to 60 seconds and then release it at which time the unit powers off.  then turn the unit back on and let it boot up.  Upon receiving a new print command it will then print.  But same problem then occurs next time it receives a print command.  I have also run the HP Print and Scan Doctor which indicated a device detection problem and suggested unplugging the power cord.  After doing so and selecting "retry" the HP Print and Scan Doctor indicated it fixed the problem ----- but it did not (printer would still not print until once again the power button was held in for 30-60 seconds as described above.  Upon calling HP tech support they told me i needed to buy a new printer because this one was too old! (is 3 years too old to expect the printer to still function???)  Any help would be appreciated!

    Hello-
    Make sure printer firmware is up to date.
    http://www.youtube.com/watch?v=qZBhl0eMBPs
    Also, plug printer directly into wall outlet.
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    Donald

  • Officejet Pro 8500 A909g Wireless suddenly won't print yellow; no error messages

    Is it possible that a printhead needs to be replaced even when Diagnostics Pages all say "Printhead health:  Good"?   I don't have any error messages.  There are no obvious white lines through the colored blocks on test pages.  In a couple of blocks on some test pages, there is one, very fine, barely visible line, but it's not the same on all pages.  (Today I've printed about a dozen test pages of three different kinds that have colored blocks on them, and there are no white lines like the ones shown in examples of bad test results.)   I have used the tool for cleaning the printheads many, many times today and have cleaned at all of the levels.  The ink level in the yellow cartridge is fine, and it's been working well until yesterday and today. 
    The printing of the five colored blocks on test pages is good, bright, and clear.  The only problem is that the block which is supposed to be a light orange color is only pink, and the block that is supposed to be green is only blue:  they are lacking yellow ink.
    I haven't had any problems with the paper I've bought at Staples for six years (I also bought my printer at Staples ).  The printer is six years old but has not been used hard.  I use it regularly for a page or two a few times a week, so the printer isn't sitting idle for weeks at a time. 
    I read something in "help" information about using a straight pin to gently remove excess adhesive from the nozzle of a new ink cartridge, which didn't apply to my cartridge, but I decided to experiment anyway by pushing a pin through the nozzle of the partially-used, yellow ink cartridge,  The test page I printed after that is the page with just four colored blocks on it rather than the five blocks on a different test page.  This is the only time in two days that the yellow ink has printed.  However, it printed in a wide horizontal band a little streaked with gray in the middle of the block.  Then there are fairly wide white bands (no ink) both above and below the wide yellow/gray streaked band in the middle, and there are very narrow, yellow, horizontal strips  printed along the very top edge and the very bottom edge of the block.  In other words, the sequence of horizontal printing in this block only is:  narrow yellow strip, wide white band, very wide yellow/gray streaked band, wide white band, and narrow yellow strip.
    It seems this might mean that some yellow ink actually got through after I'd poked the pin into the center of the nozzle of the partially-used ink cartridge?  However, when I tried printing the same test page again, there was no color, no ink showing at all where the partially-printed, yellow block had been on the previous test page.  There was only a totally blank, white space where the yellow test block was supposed to be.  The blue block, the red/pink block, and the black/gray block all printed well.
    When nothing solved the problem of yellow ink not printing, I replaced the partially-used, yellow cartridge with a new yellow cartridge, but that didn't make a difference either:  the yellow ink is still not printing.  Yes, I use genuine HP ink cartridges.  I buy new ones whenever I need them -- never refill them or use any other brand but HP. 
    I used the alignment tool once to fix some slight wavering in the lines on a test page.  The lines are now perfectly straight.
    I apologize for being so wordy, but I wanted to send all of the details that might help diagnose the problem.  I read other questions and answers in the forum about yellow ink not printing, but while there were some similiarities, none of them was 100% exactly like my experience with the problem.  What shall I try now?  Thank you for any suggestions.

    Good day.
    Can try the steps in this document?
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.begCache...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Say "Thanks" by clicking the thumbs up in the post that helped you.

  • X64 looks like it is printing to somewhere but not to printer

    2008 R2 operating system trying to install 8625 printer. When I hit print I can see it goes to this printer then it appears to send it somewhere as it is no longer in the printer window but it never prints. could it be sending it somewhere else? I have 3 computers hooked up wireless including the server and all work except for it. I had a local computer tech come over and he said it appears to be an issue with the software for the 2008 operating system but like I said it shows no errors, hit the printer window and just disappears like it should print but never does.
    Could someone have done something to my 2008 software and is stealing my printed information or is it just a HP 8625 driver bug? Thanks
    I have tired to contact HP by phone and left a message but no response, sorry but it is a joke! Maybe if they would remotely fix the issue they would learn something. LOL

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

  • My HP OFFICEJET PRO 8500 PREMIER WITH FULL INK CARTREDGES PRINTS ONLY BLACK AND MAGENTA, BUT NOT

    YELLOW OR BLUE.  i "CHATTED" WiTH HP ABOUT THE PROBLEM AND  ASKED THEM TO SEND MY NEW PRRINTHEADS
    UNDER WARRANTY 3 WEEKS AGO, BUT THEY HAVE NEVER ARRIVED.  OFFICE DEPOT SAID THE PROBLEM WAS THE PRINTHEADS, NOT THE INK CARTREDGES.   HOW DO I JACK UP HP ON THIS?    MY OPERATING SYSTEM IS WINDOWS-7.  THE PRODUCT IS CB025 -64001.  HELP!

    Hello @Wodooy,
    Welcome to the HP Support Forums!  I see you were running into some print quality issues on your HP Officejet 8500 Premier. You contacted HP Phone Support and the end result is the printheads need to be replaced, you were told you would be sent replacement printheads but have still not received them.
    I suggest contact our technical support at 800-474-6836, to check the status of your order. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Please reply back with the outcome!
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Using QT7 pro to convert.mov to MP4 to post to Vimeo, but movie comes out out of sync

    Just bought QT 7 Pro so i could convert a .mov I created in iMovie into a MP4 so i could post on Vimeo etc. Resulting video looks perfect but all a the music tracks and the audio portion of the video (which run perfectly as a .mov) are shifted about 5 seconds early.

    Did you check that the easy setup is matching properly with the audio/video settings of your material (once converted)?
    The audio file should be AIFF 16 bits, 48KHz if you chose one of the 48KHz easy setup. Have you tried exporting only the audio with those settings and see when applied to the timeline if rendering is still needed?
    Armando.

Maybe you are looking for