HP Officejet Pro 8500A Premium e-All-in-O​ne Colour Ink-jet - Fax / copier / printer / scanner

I used to be able to print two pages to one page without any problems however, recently the pages are printing magnified and cutting off the sides or the bottom section of the pages. (I hope that makes sense!) I've not made any changes to the settings and the documents i'm printing aren't any different (they're generally journal articles, large documents). Should I reinstall the printer to reset to default settings? Any advice is appreciated!

HI manisha211,
Sorry that you are having this issue and welcome to the HP forums;
What Operating system are you using?
I will assume you are using windows; please try this utility Click here
You can always find good utilites that will help you solve issues if they araise GO HERE
Let me know; the outcome I will do my best to help you if you further assistance.
Hope this Helps!!!
RobertoR
and remember . . .
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Similar Messages

  • I have an HP Officejet Pro 8500A Premium e-All-in-One Printer - A910n.

    I have an HP Officejet Pro 8500A Premium e-All-in-One Printer - A910n.  I’m trying to set up HP Connect, but every time I create and account it tell me to log in using my Snapfish password.  When I use my “valid” Snapfish password, it comes back asking "invalid password".  How do I correct this?
    If I'm not on the correct board, please let me know which one I should use.
    Thanks
    This question was solved.
    View Solution.

    Hi. You are on the proper board!  Unfortunately to fix the account mis-match issue you are having you will need to share personal information.  To protect your identify and the security of your account I will private message you with what HP will need in order to get your Snapfish/HP Connected accounts synced up so you can use the web services!    
    Thanks!
    Although I am an HP employee, I am speaking for myself and not for HP

  • HP Officejet Pro 8500A Premium e-All-in-One Printer - A910n and duplex printing.

    on the product page where I went to buy the printer it says that this printer can do duplex legal, the info below is from the product page under specs.  The problem is that I can printer duplex on legal size paper.  Why and how I can fix that, because the reason I bought this printer is that it can do duplex: legal.
    Supported paper sizes
      Tray: Tray 1: Letter, legal, statement, executive, 3 x 5 in, 4 x 6 in, 5 x 7 in, 5 x 8 in, 4 x 10 in, 4 x 11 in, 4 x 12 in, 8 x 10 in, envelopes (No. 10, Monarch, DL)
    Duplexer: Letter; legal; executive

    Hi,
    Wow... Could you provide me a link to the site where you found the information on the "legal duplexor"?  I found this information on the A910n product page ... product specifications.  I found that it doesn't support the legal duplexing.
    Here is the link to the document:
    Product Specs
    You will want to expand the section supported paper sizes, and look at the table for legal.  There isn't a check mark for duplexing.
    How long have you had the product?
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

  • Auto switch from tray 1 for envelopes to tray 2 for letters on HP Officejet Pro 8500A Premium

     Hi I have a HP Officejet Pro 8500A Premium e-All-in-One Printer - A910n My Operating System is XP Media Center.  I haven't been able to get it to switch from one tray to the other automatically. Also  it only remembers 1 type of paper at a time. I can't get it to show in Properties, Paper  available, more than one type of paper. I open device settings, Form To Tray Assignment, Printer Auto Select :Letter.     Tray 1 : Letter   Tray 2 : Letter.   Now I change Tray 1 : to Envelope #10  click apply, click ok, it closes out. I open the Properties back up & Tray 1 : is back to letter.  Is there a way to get the printer to remember the it is set up with 2 Trays with 2 different types of paper ? I think the problem lies with the Printer Auto Select : But I am not sure. I would like to be able to print an address on an envelope when working in works. Without having  to manually change the Tray settings. Does any one Know How to set this up ? Thanks in advance for taking the time to read this issue.
    This question was solved.
    View Solution.

    Hi MrHope,
    Make sure that the printer is set to have tray 2 as the default tray, and then try setting the paper types for each tray in the printer settings.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02917871
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • HP Officejet pro 8500A premium, all-in-one printer, scanner problems

    I have an HP Officejet pro 8500A premium, all-in-one printer.
    Tried uninstalling using the HP supplied uninstall software and installed recommended OSX 10.8 software for this device.
    I use wireless scanning. Scanner only scans the first page then shows an error.
    Anyone have this problem as well and any possible solutions?
    Thanks

    The HP Scan works just fine in Mountain Lion for me. Always has.
    OfficeJet Pro 8500 A909a
    I think the original poster needs to reinstall the latest software for the printer that came with his printer or directly from HP. Then, install the Apple HP updates.
    When he unistalled the HP software, it may have removed the software needed for HP Scan to work properly.
    The last software I installed from HP was -> HP_Installer_Officejet_Full_Group05_10.3.dmg
    Yes, there have been Apple HP updates, but they never stopped my HP Scan from working.

  • HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page.

    HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page.  I continually get a message that the computer cannot communicate with the printer.   Not only will it not print docs, it will not print web pages using IE 11 or Google Chrome.
    I've used Print and Scan Doctor, it always reports there are no issues and prints a test page even though I can't print anything else. 
    Each time I want to print, I must reboot the computer.  After reboot I have one chance to print.   This problem started February 15, 2015.  
    My operating system is Windows 8.1.   I have unintalled the HP software, rebooted, then reinstalled the software:
    OJ8500_A910_1315-1.exe
    HP Print and Scan Doctor - HPPSdr.exe
    HPSupportSolutionsFramework-11.51.0049.msi
    All versions were last downloaded on April 4, 2015.
    I have a home wireless network (Ubee DDW366 router).  All other devices in the house will print to the 8500A printer without issues:  2 Toshiba laptops, 2 Android phones, and 1FireHD.
    The desk top is installed with a Netgear Network card I don't know the model, but I had it tested by a PC Tech to confirm that the card is working.   The card and Windows 8.1 were installed on January 3, 2015.
    I have run virus scans and malware scans.  Each time they show there are no issues with my desktop.  What kind of desktop? Specifically made to my specs from store parts. . . no brand name computer.  ASUS Motherboard P6X580 Premium.  Now I will probably get hacked!
    I am at my wits end.  And it is frustrating when I need to make a print of something and the system locks up.  I often resort to screen printing to a word document to save in order to reboot. . . .but then I lose all sorts of capabilites when I salvage what I needed.  Also this is a time consumer.
    This printer has served us well for two years and I have expensive cartridges waiting; another two rounds of refills.
    Help?
    Addendum:  I can scan using HP Printer Assistance.  I open the HP Printer assistant, it "retrieves" info from the printer, then I select "scan a document or photo" and the printer responds.   I have no trouble with scanning.
    This question was solved.
    View Solution.

    Hi ArielAce , thanks for getting back to me!
    I would recommend downloading and running the HP Print and Scan Doctor.
    Please keep me posted!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • What is the best photo paper 4'x6' for HP Officejet Pro 8500A Plus e-All-in-one Printer?

    1.-HP Officejet Pro 8500A Plus e-All-in-One Printer
    2.-OS: Windows 7-64
    3.-No error messages
    4.-No changes have been made
    5.-I have been printing in my with old "hp premium plus glossyphoto paper" and getting very dark photos and too much  wasted ink .
    I've been using "hp premium plus glossy photo paper" and getting very dark photos.
    Before this printer I used a Deskjet 5550 with the same paper and getting great quality. 
    Thank you. Luis Cuenca 
    This question was solved.
    View Solution.

    HI cuencaky,
    Here is a link to a page with an example of good 4 X 6 photo paper you can use with your printer. 
    This type of paper is known to work very well.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Officejet Pro 8500A Premium will not print from my laptop

    I have an Officejet Pro 8500A Premium. I jus had ot reload my driver thinking it would resolve the below issue but it did not. The connection string is  laptop -> docking station -> ethernet to router -> ethernet to printer.  On my laptop I can see the ink levels of the printer so there is a connection but when I attempt to print and select the Officejet 8500 (non fax) printer, it attempts to print to the 8500A fax and then pops up with a fax box.  
    Additional Information:
    I have tried the following:
    - Changed the port for the 8500A fax
    - Tried to set the default printer from the fax to the network printer - received an error message: Operation could not be completed (error 0x0000709). Double check the printer name and make sure that the printer is connected to the network.
    This question was solved.
    View Solution.

    Hello coolhandluke2,
    Welcome to the HP Forums.
    I see that you are having issues when attempting to print from your Laptop.
    I also see that you are getting an error 0x0000709.
    I do have a few suggestions we can try.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I am also going to give you a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error Me....
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Error message C00E0060 on my officejet Pro 8500A Premium printer

    HI, Error code C00E0060 appears on discplay screen brieflky then change to blank display with the icon lights blinking.  Powering on and off the printer won't do anything.  Can't figure out any solution. I'm not able to use of the printer functions. I'd appreciate any solution you can share me.  Thanks

    Welcome ,  I saw your post regarding the problems you are having with your Officejet Pro 8500A premium getting an Error code C00E0060, and I found some information about it.
    The error you are describing could be an issue with an ink cartridge or with the printer. To narrow down and determine which is having trouble can you try the following an let me know the results;Remove all of the ink cartridges, does the message change to 'Replace the (K) (C) (M) (Y) Ink Cartridge'?Put only the black ink in,  does the message change to'Replace the (C) (M) (Y) Ink Cartridge'?Remove the black and put only one colour ink in,  does the message change to reflect the change?Remove the colour, and test each one individually. 
    When you have the ink cartridges removed, you might want to try a hard reset. To do so, leave the printer on and unplug the power cable from the back of the printer. While it is unplugged, you can hold down the power button on the printer for about 10-15 seconds to release any built up power. Then plug the printer back in and see if the error goes away. If the error message doesn't change when you do any of the above steps, it would mean that it is a fatal error with hardware, as mentioned in this similar post; Error Code C00E0060. Is the printer connected directly to a wall outlet or is it in a surge protector or a power bar? We want to connect it to a wall outlet just so we can eliminate the power source as the root cause. See this document for more information about Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector (Note: This document is not limited to Laserjet printers.)   Please let me know if these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!   Thanks, 

  • Officejet Pro 8600 Premium e-All-in-One - N911n photo paper Not a paper choice for Tray 1

    For the HP Officejet Pro 8600 Premium e-All-in-One - N911n printer
    I am running Windows 7 64-bit
    No error Messages
    New Printer setup
    I do not see photo paper as a paper choice for in Tray 1
    This question was solved.
    View Solution.

    Hi FrancoArdito,
    Follow the steps below to print photo from Tray 1
    1. Insert the 4x6, 5x7 or 8x10 photo paper into Tray 1
    2. Open printer preferences from the printing application program
    3. Click on Paper/Quality tab
    4. Select the Paper Size, Media Type, and the the Paper source
    5. Click Ok to save the settings, and then print from the application program.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • HP Officejet Pro 8500A Plus e-All-in-One (A901g)

    I'm thinking about getting a MacBook...would the "HP Officejet Pro 8500A Plus e-All-in-One (A901g)" work well with this and for what i need?
    I need an All-in-One...I have an iPhone, so I would like the Air-Print feature...and since I might be getting the MacBook, I would like a printer that is wireless. I also want something that is good for printing quality pictures.
    It appears this printer has everything i am looking for, but it doesnt say anything about being wireless...does anyone know if it is or not?? if not, can anyone recommend a printer for what i am looking for?
    thanks

    Also is this printer quiet? I am considering this for a library setting, and don't need a noisy printer! Thanks.

  • I own a hp officejet pro 8500a premium and when i turn it on, the screen shows 83c00009

    i own a hp officejet pro 8500a premium and when i turn it on, the screen shows 83c00009

    HI I hope you are having a great day and sorry to see that you are having this issue,
    if you still having this issue  I will do my best to assist you
    Read this article follow the steps on it GO HERE
    If you are using Win xp or later you one of several very good troubleshooting utilities that HP offers GO HERE read the intendd use and run the one that fit your needs;
    If you are not experiencing this issue any longer or you are not using Windows, let me know I will be deeply appreciated
    Hope I can be of help;
    RobertoR
    remember↓↓↓
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • HP Officejet Pro 8500A Premium scans PDFs at legal size but I want letter size

    Hi, I have an iMac with OS 10.7.5 and my Officejet Pro 8500A Premium makes scans to computer that are legal size, even tho the original is letter sized. I can't see how to change this in HP Utility. I don't have HP scanning software because I was unable to install it. My doc feeder doesn't work either. Any ideas? Thank you.
    This question was solved.
    View Solution.

    Thanks a million! This worked for me.

  • Need MICR compatible ink cartridge for Officejet Pro 8500A Premium to print checks.

    I need to print bank accepted checks on my Officejet Pro 8500A Premium printer using MICR ink.  I cannot find a compatible MICR cartridge for this printer.  There are MICR cartridges available for other HP printers.  Does anyone know of a compatible cartridge? 

    Try using the multilevel uninstaller in the HP software driver CD. Browse the contents of the CD and look for the "Util" folder and open it. In the "Util" folder, open the "CCC" folder. In the "CCC" folder, double click on the "Uninstall_L3.bat" file. Don't use the "Uninstall_L4.bat" file. It could remove files that have shared dependencies with the HP software. Restart the computer and then reinstall the software afterwards. Let me know if it worked or not.
    Binary_Zen (worked at HP )
    Click the white Kudos star to say thanks
    Please mark Accept As Solution if it solves your problem

  • How do you do double sided printing with eprinting with a hp officejet pro 8500a premium?

    How do I do double sided printing with eprint?  Why is there no option to change it online?  I have
    HP Officejet Pro 8500A Premium

    Hi,
    Automatic Two-Sided printing is not currently supported by the ePrint Service, as you may find any of the service capabilities and limitations listed below:
    Duplexing (printing on both sides of the page) is not supported.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02641898&cc=us&dlc=en&lc=en&product=4083971&tmp...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for

  • Hard drive failure… 3 1 TB drives  dead?

    I have had three 1 TB drives fail after very little use. The first two drives were Western Digital Green  1 TB drives.   Best Buy was overstocked and selling the Mac version of its USB Western Digital drives.  I took the drives out of the cases and I

  • Object dependency doesn't work for class type 001.

    Dear All, I would like to use classification for picking up material. I set up a class with class type 001 and assign to material. When I use mm03 to search the material with class, the object dependency in the characterist doesn't work. Does the obj

  • When firefox automatically updates it clears my saved tabs. Is there something I can do to keep my tabs open?

    I'm not sure with which version this started happening but it's only been in the last several months. When I exit firefox before retiring I'm asked if I want to save my tabs, which I do. Then when I open firefox and its been updated, tabs are lost.

  • Salary Data iview inside General Information

    Hello Colleagues, In MSS, we added the "Salary Data" iview to the "General Information" section/workset. However, when we select an employee in the "Search" area, no data is displayed in the "Salary Data". However, the "Salary Data" works when used i

  • RAC Node eviction question...

    Say we have 3 node RAC cluster on OEL5.3. What happens if one node evicted out of it? I know other two instance will do dynamic remastering... and something more. I want to know eachand every steps in detail. What really happens when one node goes do