HP Officejet Pro 8600 not able to connect to internet ip setting disabled

My printer has been connected and working in wireless mode for 2 months. now not able to connect and printer is locked and shows "IP no link".

Power off both printer band router.  Power on router wait 3 mins.  Power on printer and verify it connects to your router and you have a valid IP.  Reboot computer and now try.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

  • HT204409 I have a MacBook Pro and not able to connect to Internet? PLEASE help!

    I have a MacBook Pro and not able to connect to Internet.  I have other HP comp and iPad and am able to connect.  I have contacted AppleCare....they said disconnect router and leave unplugged for an hour, which I did...still no connection.  Any suggestions?  Thanks!

    Call Apple Care back & tell them their suggestion did not work. 
    Solution may be found if you search in the "More Like This" section over in the right column.

  • Officejet Pro 8600 not able to be set as default printer

    I've just installed the Officejet Pro 8600 on my wireless network.  It was added correctly using WPS andindicated no problems found on the wireless network test results that the printer did. All items were listed as 'PASS'. It is showing up in the device and printers on my Windows7  64-bit machine. When I right-click on the printer icon, it does not allow me any option to set it as my default printer and it also doesn't show up as an available printer from any application to print (like from MS Office). The device driver was auto-located by Windows, so there is also no option for me to update it. Anyone have a solution for what I need to do to get the printer available to actually print too?? Thanks.

    Hi,
    I had a smiliar problem for the same printer that I bought just yesterday.
    Despite numerous troubleshooting tasks, I was still unable to make the printer my default one.
    I tried
    - switching from wireless to USB connected
    - uninstalling and reinstalling
    - cleaning registry entires as directed here:
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup-e-g-Windows-8/Cannot-Set-HP-Officejet-...
    - running troubleshooting wizards and more...
    So... after yet another re-installation, I went here:
    https://h30495.www3.hp.com/help/about
    and clicked on Printer Support under Additional Help (down at the bottom)
    - choose North America
    - choose HP Support - United States (English) --> Product Support and Troubleshooting -
    - now - here - IMPORTANT - http://www8.hp.com/us/en/support-drivers.html :
    DO NOT  Enter a product name/number
    - but choose
    Or automatically find your products and solutions - click on START button
     you may need to ALLOW your antivirus software to scan your computer and after a minute or so you will get a response like this:
    1 HP products were discovered
    »HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g                 Serial Number:                                 Product #  here                                               Product Number:                                 Number here                               
    Now got to Start - Devices and Printers and RIGHT CLICK on the HP printer device and choose Printer Properties:
    The GENERIC NAME  "HP Officejet Pro 8600" needs to be replaced with FULL NAME of your printer:
    HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g
    Click "Apply"  - click OK
    Now make your printer DEFAULT
    GOOD LUCK!

  • My iPhone 3gs is not able to connect through internet. I have a Airtel wireless at home.Phone connects through wireless but not opens any page or itune or apllications

    My iPhone 3gs is not able to connect through internet. I have a Airtel wireless at home.Phone connects through wireless but not opens any page or itune or applications.

    Hi,
    can you provide a bit more detail, as can you use the 3G network to access the web, and what security is your wireless using?
    Regards
    Ryan

  • The wi-fi button on my iPad 2 is not functioning.  I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory.  What else can I do?

    The wi-fi button on my iPad 2 is not functioning.  I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory.  What else can I do?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Thinkpad- T61 - Not able to connect to Internet either by cable or Wireless

    Hi Friends
    I'm having a T61 Thinkpad and yesterday i had tried system restore, but it has not done any changes,
    But then, I'm not able to connect to Internet either by cable or by Wireless.
    When i pressed Thinkvantage, i could see the Hardware wireless is on "OFF" status and I'm not able to turn it ON
    Can anyboby help me on fixing this issue and enable connect to INTERNET
    Thanks in advance
    Regards
    Sasi

    Hi,
    can you provide a bit more detail, as can you use the 3G network to access the web, and what security is your wireless using?
    Regards
    Ryan

  • Not able to connect to internet usig LAN

    hiii
    i have domain network which is connected through LAN for all the user machines now suddenly what happened we don't know all the machines are not able to connect to internet and domain also.
    help me to get out of this problem
    thanks in advance
    with regard's
    haasan 
    thanks & regrds sri ram

    Hi
    I think we need bit more information regarding this issue.
    You've said machines are not able to connect to Internet and Domain. Two different things are you not able to log on to the domain with your domain user accounts.
    Are the Domain Controllers are up and running or have you checked if your switchs are working properly.
    Please update with the above then we can help further.
    Thanks
    Umar

  • HP Officejet Pro 8600 Plus losing wireless connectivity, cannot scan to computer

    In our office, we have roughly 4 computers using the HP Officeject Pro 8600 Plus, all of which are connected wirelessly. The printer was previously connected to the internet wirelessly with no problems. A couple of days ago however our computers started randomly disconnecting. The printing function would work for a bit, then disconnect. I found the only solution to this problem was to hit the button on our wireless router that resends the wireless signal out for connectivity. 
    We hardwired the printer with an ethernet cable and I myself didn't see any further problems regarding connectivity but a couple of the other computers had spotty connections.  Again, each time this can be remedied by hitting the button on the wireless router.
    Today  however we had an additional problem, after trying to scan a document through the automatic document feeder, the printer said it was jammed (although it wasnt). When we went to rescan, the scan to computer function was no longer working. I can scan by hitting the scan button on my HP Printer Assitant interface, and I can also scan to email, but cannot scan to computer.
    I have gone through several forums and haven't been able to find a solution. I personally use Windows 8, but other people in our office are using older versions of Windows. We've tried unplugging, restarting, hardwiring, resetting wireless settings, uninstalling, etc. etc. Before a few days ago the pritner was working fine for a number of months.
    If anyone has any ideas they would be greatly appreciated.

    Hi rtaw,
    Welcome to the HP Forums!
    I understand that you cannot scan to computer, and that you are losing wireless connectivity, with your HP Officejet pro 8600 Plus. I am happy to help you with this issue!
    Please take a look through this wireless guide. Printer Does Not Maintain Wireless Connection.
    For the scanning, please see this guide. A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning.
    Hope this information helps you, and let me know if you have any more issues!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • HP Officejet Pro 8600 Plus - no wireless connection

    Hi,
    I am now onto my second HP Officejet Pro 8600 Plus. The previous one froze entirely. This one switches on ok, but is unable to connect to my wireless router (even when it is inches away from the router). The blue wireless indicator is constantly flashing, and when I try to set up the wireless connection is just says "searching" and the screen never changes. I have tried restoring factory defaults and restoring network defaults.
    Does anyone have a solution please?
    Glynn

    You are not connecting to your wireless router if the blue (wireless) light is flashing.   Move the printer to 3 feet away from the router.  Set the router to a fixed wireless channel like 1, 6 or 11 never 'auto' try all three.  Use 20 Mhz only or 145Mbps depending on the router.  Power cycle both.  Connect to your SSID using WPA2-AES encryption with your password.  Have to connect to the router successfully first.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • HP Officejet Pro 8600 not scanning to computer

    My HP Officejet Pro 8600 is not scanning to my computer HP computer, Windows 7. This has worked fine for quite some time, not sure what happened to change it. It is a wireless connection but the printer works, and I can scan to a memory card just not to the computer. The printer software doesn't give me the option of opening the scanner. Another program said the scanner is not enabled but nobody has touched the computer! Any suggestions in language I can understand would be greatly appreciated!

    Too bad nobody answered yet. It sounds like some simple troubleshooting can help narrow down the problem, but I'm no expert and all I can suggest is to try posting the question to http://answers.microsoft.com/en-us/windows/forum/w​indows_7?tab=Threads.

  • Officejet pro 8600 not responding

    Hi everyone,
    I have an HP officejet pro 8600 printer. I was running it wirelessly from my desktopo tru the router. I then installed it in my HP Envy notebook to print also ducuments and it worked. Then, I tried to install the sofware on my Mackbook Pro which I downloaded it from HP website (It didnt work) but then it just stopped printing for my desktop and Envy notebook as well. My desktop is an HP running on windows 7. Anyone with ideas would be highly appreciated.

    Hi cipote,
    Welcome to the HP Forums!
    I see that you cannot print with your HP Officejet pro 8600 from your Windows, or Mac computers on a wireless connection. I am happy to help you with this issue!
    Please take a look through this wireless guide. Printer Does Not Maintain Wireless Connection
    Hope this helps, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Officejet Pro 8600 Plus - Apps Error - 'Connection Error'

    Hi,
    Newbie question maybe, but it's got me a little stumped.
    I've an HP Officejet Pro 8600 Plus on a wired connection to my Sky router/ADSL modem, using a static IP.
    when I go into Apps it pulls down a list of the installed Apps OK, but when I select any one from the printer control pad it tries to connect then throws an error.  I can;t see a place I should set anythign up.
    I have a woerkign hp ePrint Center account, ePrint works (eventually!) when I email docs to my eprint email address, adn also via Google Cloud Print and Apple AirPrint.  While it;s not ruining my life, I would like all of the printer functions to work :-)
    I can print to a network folder, as long as it;s on a PC, although my NAS it won;t print to for some reason, but I guess that's a further question :-)
    Any help very much appreciated!!!!
    MF668

    Hi MF668,
    Try setting an alternative DNS and check if that may help:
    Press the wireless icon on the top of the printer screen and locate tis IP address.
    Browse to the printer's IP through the web browser on your PC.
    Click the Network tab.
    Under Wired click on IPv4.
    Under DNS Address Configuration select Manual.
    Set the Preferred address as 8.8.8.8
    Set the Alternate address as 8.8.4.4
    Click Apply to confirm the change.
    Now turn the printer Off and back On and check for any difference.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • OfficeJet pro 8600 not printing for USB attached WIn7

    I have an OfficeJet Pro 8600 Attached  to Win 7 Dell with USB cable.  It scans very well but most of the time when you go to print, it thinks the USB device has timed out and it gives me garbage about where to send a fax to?   
    I have other computers runing XP that are Wireless devices, and they take longer but print every time something is sent to them.
    This connection is 3' away and the printer default & only printer for Win 7 machine.  Under printers and devices it always  sees the printer.

    Try to run the Print and scan doctor and check the results. 
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c03275041
    Also, see if you can get another USB cable. Let me know the results. 
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • Can you print from the ADF with Officejet Pro 8600 (not plus) & how to print checks in correct order

    Client has Officejet Pro 8600 I(not plus) They want to print payroll checks out of QuickBooks but when they put the checks in tray 1, it pulls the check that is on the top, which happens to be the last check # in the stack.  Is there a way to print where the printer pulls from the bottom of the check stack as opposed to the top. I've looked and can't seem to find the answer. QuickBooks says we should check with HP and change something in the print drivers?
    So I thought it would fix it if they printed the checks from the ADF where I thought I could control if it pulls from the front or back of the stack. When we tried to print from the ADF, it pulled from Tray 1 and we weren't given the option to print from the ADF.   (only Tray 1 & 2...which they don't have the 2nd tray anyway) So does this model, not being the PLUS model, not allow you to print from the ADF. (only scan, copy and fax from the adf?)
    If we can't use the ADF for check printing, then how can we get the checks to print in the correct order.  Meaning, the 1st check # to print should be on the check that is on the bottom of that check stack in Tray 1.  Otherwise they have to count out the exact number of checks & place them in the tray.  Or reverse all of them which is not an efficient either! I hope this makes sense.

    Hi @kceacct ,
    I see that you would like to know how to print out the checks in order. I will do my best to help you.
    The ADF can be used for copying, scanning and faxing.
    From the print driver you can only select the tray that you want to print from.
    Changing Print Settings in Windows 8.
    You would have to load the checks in order from top to bottom in the paper tray, since the printer just pulls the paper in from the top of the stack of paper.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Officejet Pro 8600...laptop cant find printer to set up wireless printing

    I just purchased an HP officejet Pro 8600 and successfully synched it to a laptop in my office for wireless printing without a problem. Immediately after that, I attempted to connect the printer to another laptop in the office and the 2nd laptop cannot find it even when I type in the IP address manually. Both laptops are the exact same model and both laptops and printer are all successfully connected to the same router. I've tried almost everything and still can't figure out whats going on. Please advise. Thanks.

    Hello-
    What Operating System are you running ?? Is there any Firewalls on the second PC ?? Are you running any VPN's on the second PC ??
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    Donald

Maybe you are looking for

  • How to get permission of a sharepoint list for a user using REST api

    Hi there, I have a requirement where i need to check the access permission of a user against a List or Library only using REST api from my remote salesforce app. [I already have access token and I am able to view list, add item etc..] Say for example

  • How can i send an error message at EXIT_SAPMM06E_013 ?

    Hi I'm making some validations to Vendor and Partner Functions (table control in 'Partners' Strip) in Creting/Changing Purchase Orders (ME21N/ME22N).  I know the suitable user exit is EXIT_SAPMM06E_012 for making validation before saving, but this ex

  • Can I backup my LaCie Mass Storage device to time capsule?

    I was told at the Apple Store that I could not back up my LaCie to time capsule.  My time capsule shows the LaCie as an available backup device.  Why would this not work?

  • ITunes Software Problems with Windows 7

    Hallo Community, nach jahrelangem erfolgreichen synchronisieren meines Iphones mit ITunes auf Windows 7, geht plötzlich nichts mehr. Deinstallieren und installieren der ITunes Software hat nichts gebracht. Ein löschen der ITunes Software von der Fest

  • Dock size keeps changing?

    I always set dock size the smallest. But it keeps changing so that it's slightly bigger than the smallest. Why is it changing all by itself?