HP Officejet Pro L7680 All-in-one Printer - Failure to access update.

I cannot access the update for my printer. I have upgraded to  Windows 7 32-bit. I keep receiving the error message:  could not connect to Content URL/Default Content.  Can someone please help me by telling me what to do?  I am having no other issues with my printer.  Thank you for your help.
gegbekett

Since you upgraded to Win 7 32 bit, you need to download and install the correct full featured software and drivers from the HP web site here.  Now try.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=2512​...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

  • HP OFFICEJET PRO L7680 All-in-One PRINTER does not print yellow color at all

    Last week I understood that my Printer does not print at all yellow color.
    All other colors and tests I made are ok.
    I cleared printheads, made all printing tests, and diagnostic pages.
    In every printing was missing the yellow color..
    I changed the yellow catridge with another full one, and the problem persists..
    PLS could any body help me?
    Many tks
    antpep

    Welcome to the community @antpep
    I understand your Officejet Pro L7680 is no longer printing in yellow for you, and I'd like to offer my suggestion that may help you!
    Please click on the link below and try the steps in the guide.
    Fixing Print Quality Problems for the HP Officejet Pro L7500, L7600, and L7700 All-in-One Printer Se...
    If the yellow is still not printing for you and you reach the step to "replace the printhead", please consider contacting HP's technical support to see what your options may be with them in regards to a replacement part or unit.
    HP's contact info:
    If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada,: click here.
    Have a wonderful weekend ahead and thank you for posting in the community
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Officejet Pro L7680 All in one printer with leopard

    Greetings,
    Both my girlfriend and I print from home on this nice, newer printer that works great. There were a few bugs with Leopard once we installed it, but eventually it worked perfectly (for the last month or so) with my Macbook Pro. Today however I could not print and it showed up as an active printer. I recalled that when I was stuck in the past, I deleted the printer and then added it again and it worked....however today there is no printer showing up in the boxes. When I click the "+" sign, there is nothing in any choices. I am hooked up wirelessly and have a wireless hub and wireless cable internet. Basically most anyone with a mac could walk in my home and print and I like that. Now it seems my printer has "disappeared"...I did reboot the Mac and also the printer with no luck.
    Thanks in advance for any hints or tips!
    Jason

    Hi,
    Try installing the updated HP software which also contains drivers, this is available at
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-56730-1 &lc=en&cc=uk&dlc=en&product=2512009&os=219&lang=en
    Hope this helps

  • HP OfficeJet Pro L7680 all-in-one: Does it have internal stored memory?

    Same question as the last post only for a differnet printer model (sorry for what may seem like a duplicate question - I'm just trying to be sure I don't cause myself a headache later).
     I have an HP OfficeJet Pro L7680 All-In-One (FAX/Scan/Print/Photo) printer that I'd like to get rid of it.  Before I dispose of it, and for security purposes, I'd like to know if there's an internal hard drive that could potentially be storing anything I may have copied, scanned or faxed.

    Hello sixmil5, and welcome to the HP Forums, I hope you enjoy your experience! I see you have concerns about the printers internal memory.  The memory is automatically reset when the printer power is unplugged, so you should have no issue with personal information being saved.  Thank you for posting on the HP Forums and please let me know if you have any other questions.

  • Paper Jam error message due to broken gear on Officejet Pro 8500 all-in-one printer

    3 year old HP Officejet Pro 8500 all-in-one printer (haven't used it much). Keeps telling "Paper Jam" although there is no paper jammed anywhere (searched meticulously with a flashlight after watching HP's tutorial videos on how to clear paper jams). I started searching on the Internet and found a couple of related videos on Youtube that pointed me in the right direction:https://www.youtube.com/watch?v=PMFW1RRlDHEhttps://www.youtube.com/watch?v=EwbF2Vs_0gQ  I could hear a clicking noise on that area of the printer each time I turned it on, so I carefully took the black cap apart that was hidding the gear, and confirmed I had the same problem as in the youtube videos above. See picture below showing the white plastic gear part that has a large crack which causes the Paper Jam error message and renders the printer unusable. After Googling a little bit, seems like a relatively common issue and wonder why such a part like that is not made of a stronger material like metal (planned obsolescence maybe?). Does anybody know if there is a way of replacing the broken gear?  (I really care for the environment and I would like to avoid having to throw the relatively new and expensive all-in-way printer away) Thanks a lot in advance for the advice!

    Hey ,  Thanks for posting in the HP Support Forum.  I do see that a cracked gear in your HP Officejet Pro 8500 All-in-One Printer is impeding all functionality.  I would like to help you with this but that particular part is not replaceable.  I recommend you reach out to our tech support team to find out what servicing options you have available. You can click on the following link to initiate a case: www.hp.com/contacthp/
    Once you fill out the online form to create your case you can choose from different direct contact methods. I hope this helps. Regards, 

  • HP Officejet Pro L7580 All-In-One printer with Windows 8

    I have the HP Officejet Pro L7580 All-In-One printer and want to use it with my new laptop that has Windows 8, but it won't accept the Starter CD (Windows 2000, XP, Vista).  Where can I get a free download to use with Windows 8?  I can print, but currently can scan.

    Hello,
    You can download the software for your product from the link provided below, after selecting the appropriate Windows 8 operating system of your computer:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?product=2512008&lc=en&cc=us&dlc=en&lang=en&cc=us
    The link also has support videos that provide instructions on downloading and instaling the software.
    Although I am an HP employee, when I offer advice on HP Products, I'm speaking for myself and not for HP

  • HP Officejet Pro 8610 All-in-One Printing Preference does not have Print Last Page First option

    HP Officejet Pro 8610 All-in-One printer:  Printing Preference missing Print Last Page First option.  Print lots of multipage documents.  Spending enormous amount of time resorting pages. 
    Prior to this printer?  .... grab printed stack -  staple  -  DONE! 
    Now?   Have to resort every document!
    Anyone out there have a solution?

    Reply to mkjohnson42. It doesn't matter what application I'm in. The option is NOT there. Just to confirm, I started from Word 2010, Excel 2010, a web page using Internet Explorer, Foxfire and Chrome. Plus, I did the old stand-by of going to Printers and Devices>Preferences. Under Preferences I have the choice to print on both sides of paper but NO Print Last Page First. I REALLY did check ALL of this before resorting to the Community. So, I really don't understand your question. Sorry.

  • On a HP Officejet Pro L7780 All-in-One printer, is there a toner and where is it?

    On a HP Officejet Pro L7780 All-in-One printer, is there a toner and where is it located? I've looked in Products and Supplies and don't see it but my printer is saying that it's low or empty.

    By now, you have probably discovered that the L7780 does not use a toner but cartridges.  It actually uses 4 HP 88's.  They are black, magenta, yellow and cyan.  Usually, black is the first to be replaced.  They can be found at Staples, Office Depot and Best Buy.

  • Helvetica Font Available for HP Officejet Pro L7590 All-in-One Printer

    I have a client that needs to use Helvetica for the HP Officejet Pro L7590 All-in-One Printer, but we are not seeing this as an option.
    I assume the driver doesn't provide this font? What other options exist for using the Helvetica font with this printer?
    Thanks,
    Jeremy

    Hi,
    It should be included in Full Feature software on the following link:
         http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-Pro-L7000-All-in-One-Printer-series/360...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Officejet Pro L7780 All-In-One printer

    I am running Windows 8.1
    The printer status OFFLINE.
    It has done this in the past and I have been able to correct it by deleting and reinstalling it (at least back when I was running Windows XP and 7.  Possibly at that time it was the DHCP issue pointed out in a previous post.
    Now however, I can remove it and when I add it back, using Control Panel, Devices and Printers, Add a Printer,  it is recognized correctly on the network (shows the IP address I know is in the printer) but when I try to send a test page, I get a pop-up saying it is OFFLINE.  When I status it, it confirms it is offline.
    There is no indication at the printers display that it is offline and it shows it is communicating with the network.

    I can’t give you more than the info in my question about the model of the printer-HP Officejet Pro L7780 All-in-One printer
    I had been using this printer for several years and this has happened a few times in that it required me to delete it and reinstall—that just does not work now. This last time was after I had upgraded to Windows 8.1 however I did that several weeks ago and it has worked okay since then…this is the first time it has stopped working on 8.1 however
    Running Windows 8.1
    I tried connecting via wireless and also switched over to wired lan but got same results (Printer Unavailable)
    Used DHCP but get the same with static ip address
    Cisco Lynksys E4200 wireless router
    Just ultimately get Printer Unavailable when I try to print or status the printer
    When I try wireless, I see the wireless icon bright blue like I expect it to

  • Hp officejet pro 8600 all in one prints but won't scan

    I have recently moved house and changed my wireless router from BT to Virgin.
    I am running OS X 10.9.5
    I am able to print from my mac without issue, however, it has stopped scanning. I have managed to get it to work twice on isolated instances but it won't work consistently.
    I have unistalled the software and reinstalled via the HP download page but when I open HP Scan and click scan it asks me to choose which scanner - mine is selected, it then says preparing to scan and it does that for ages until it says it can't get a connection.
    My printe r is a HP Officejet Pro 8600 All-in-one N911g - I am not bothered that much about scanning from the printer to the computer (I have tried to enable this option and it won't let me) I just want to be able to open HP Scan and press scan and it scan on my computer.
    Any advice appreciated - thank you

    Hi there @Steph390 , welcome to the forums!
    I have some suggestions for you to hopefully correct the scanning issue you are having. Please feel free to reply back and let me know the results!
    1. Try power cycling the network devices:
    Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
    Plug the router back in and wait another minute, next turn on the printer and computer.
    2. Mac OS X: How to reset the printing system
    3. Repair disk permissions
    4. Restart your computer.
    5. Re-add the printer
    Once the printer is connected on the network, follow these steps to maintain the wireless connection, normally a static IP will help out quite a bit: Printer Does Not Maintain Wireless Connection
    Good luck to you
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Officejet Pro L7780 All-in-One Printer & Verizon D-Link wireless router. will not connect

    I have a HP Officejet Pro L7780 All-in-one and not able to get it to connect to my Wireless  Verizon D-Link Router.
    Please advise.
    aileensnider

    Let's start here.
    Printer does not maintain wireless connection.  
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&tmp_task=solveCategory&cc=us&dlc=en&la...
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • HP OfficeJet Pro L7680 All-In-One

    I am considering deploying a wireless print server for my home - specifically, a Netgear WGPS606.  I checked with Netgear and the HP OfficeJet Pro L7680 is not listed on their printer compatibility list while dozens of other HP OficeJet models are found on their list.  Can anyone confirm if the L7680 can be connected to a wireless print server and if so, can you recommend a brand?  Thanks.
    Nick Colletti
    West Des Moines, IA

    Well, the wireless print servers (at least the USB versions) support printing only, not scanning.  The OJ Pro L7680 has an Ethernet connection, why not just plug it into the back of your router so that all computers on your network can both print and scan?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Officejet Pro L7680 All-in-One - printhead deficiency

    All my HP printers have been reliable work-horses. The exception is my L7680 All-in-One. When I first bought it, one printhead came damaged. I called and called and called, finally, just ended up buying one for which I was never reimbursed. Now, after several months, the printer just stopped printing. 2" of printing, then pages and pages of garbage text. Online trouble shooting revealed only Mac problems with garbage text, but I'm PC so that's not helpful. I spent nearly an hour online with tech support in India. After many reboots, power on and off, wiping this and moving that, my printheads were "damaged or missing." I just broke down in tears and kept asking to speak to a supervisor. Tech support kept trying to convince me that "now we've discovered the real issue." I think he was just steering me into difficulty, especially after he said "you just take your sweet old time."  I just spent $172 on new printheads to print out an 11-page fax that came in while I was troubleshooting. My husband insists we're buying Epson or Canon next time. Pity, huh? In summary, if you buy a L7680, just be prepared to keep replacing the printheads.

    I Agree, HP Machines have become unreliable and the Support is appauling

  • HP Officejet Pro 8500 all-in-one printer - issues after upgrading to Windows 8.1

    After successfully downloading a driver from the HP website to enable using this all-in-one printer with a new HP laptop using a Windows 8.1 OS, I confirmed that the printing function works normally (just as it did with a Windows XP OS on my wireless home network).
    However, I don't find any icons appearing on the 8.1 desktop for other HP apps (e.g. HP Solution Center, HP Photo Creations). I do have an icon for the Printer. When opened, it shows two options: 1) add a new printer and 2) add new software (from the original CD). But the original CD is for the XP OS, which I don't try and possibly mess up what already is working.
    So-o-o, Is there any HP software download available for HP apps to use with this printer, especially HP Solutions Center?

    Hi Riley.
    You can get HP Photo Creations here:
    www.hp.com/go/hppc
    It's a free download for Mac and Windows.
    Hope this helps,
    RocketLife 
    RocketLife, developer of HP Photo Creations
    » Visit the HP Photo Creations Facebook page — news, tips, and inspiration
    » See the HP Photo Creations video tours — cool tips in under 2 minutes
    » Contact Customer Support — get answers from the experts

Maybe you are looking for

  • Unable to view data in designer.

    Hi, I have successfully imported metadata into the designer in ODI but when I attempt to view the data in the table I get an error message : "There is no connection for this logical schema/context pair: XXX_src_Schema / GLOBAL" I am having trouble tr

  • PSE 8.0 editor keeps crashing

    Ok so I will try to describe in detail what happened and I am praying someone knows how to fix this problem!  I had installed about 100 layer styles (not today up until this point) well when I go to use styles I hated how long it took to load, so I d

  • Characteristic as block characteristic

    Hello, what is the indicator (in the planning modeler) that a characteristic is relevant for building blocks ? My problem is, that i have to run an own developed planning function over all records available for a year and version, and now our system

  • [JS][CS3] Validating edittexts in ScriptUI

    Hi, I have to attach validation methods to a bunch of edit fields' onChange. Some fields would have to contain floats (toFixed(2)), some - integers, some - capitalized strings after the field has lost focus. I'm ready with 3 functions to be attached

  • Sound Level Pressure with several channel

    Hello, I met a problem with the VI "SVL Exp Avg Sound Level.vi". It works perfectly if I make a measurement with a single microphone, but with more microphones I have some computation error with discontinuity depending on the buffer size. The followi