HP OMEN Control doesn't work on windows 10

The title is self-explanatory, I have the latest drivers and HP software installed.

Solved by updating the HP System Event Utility. Source:http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-OMEN-Control-Software-No-Longer-Works-After-Windows-10/td-p/5169933/page/3

Similar Messages

Qosmio G30 - Media center remote control doesn't work in windows

Dear All,
I have Qosmio G30-194,
first i had a problem with the VGA , i send it for repair, when it comes back i noticed that the remote control is not working on windows Media Center, while in A/V mode it work perfectly.
I tried to do full system restore from the recovery DVD, but nothing changed, even i installed Windows Vista with all of its drivers.
Nothing changed also, I borrowed a USB IR received for another remote control it worked perfectly with my remote on windows.
Please advise me what to do, do i send it back to the service center , or there is an easier solution.
Mazen Habbal
N.B, : My laptop info are:
Model Number PQG32E-01P018AR
Thank you in advance

don't expect toshiba to fix problems like this.
they replaced motherboard on my laptop and ever since the remote was not working.. it would turn the laptop on but was unresponsive thereafter. thing's we have tried:
- install software and drivers for remote again
- reinstall windows
- replace reciever
- change motherboard
- change remote
- terminate and restart relevant processes
- downgrade bios
- update bios
- combinations of the above
on several occassions Toshiba told me they were able to replicate and solve the problem but after trying it on my laptop they remembered that actually their one was slightly different.
almost a year later, i still have a non-working remote
my theory is the laptop leaves factory with certain software which Toshiba fail to include in recovery partition and\or bios that is available through them... so once you lose the factory components (i.e.the original motherboard) you also lose some necessary files with them.

Rich Textbox example doesn't work in Windows 7

In the past I use the Rich Textbox example (\samples\userint\activex\richTextxbox.prj) in Windows XP (CVI 2010 SP1).
Now I noticed that this example doesn't work in Windows 7 64-bit because the ActiveX is not registered on the system (see attached error.jpg).
Isn't this control installed by CVI IDE itself?
How can I get this example working on my Win 7 64-bit machine?
Vix
In claris non fit interpretatio
Using LV 2013 SP1 on Win 7 64bit
Using LV 8.2.1 on WinXP SP3
Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
Using CVI 6.0 on Win2k, WinXP and WinXP Embedded
Solved!
Go to Solution.
Attachments:
error.JPG ‏29 KB

Hi Vix
It looks like the Rich Textbox control component provided by one of the VB runtimes is no longer included by default with Windows 7.
I have been able to manually register the ActiveX control using Regsvr32 as described in the following Microsoft KB.
I was able to download the needed ActiveX control from here and from there you need to copy the .ocx ActiveX control to your C:\Windows\SysWOW64 directory. Open up a command prompt as administrator and run 'REGSVR32 RICHTX32.OCX'.
SysWOW64 is the 'Windows On Windows' emulation directory which is used for running 32 bit controls in a 64 bit environment.
I realise this isn't the best solution as it will make application deployment a little more complicated, another solution may be to use another RTF ActiveX control such as the one here: http://www.lebans.com/richtext.htm.
Thanks
Chris | Applications Engineer NIUK

Replay video in Muse (some controls doesn't work)

Hello colleagues,
Can't understand what is happening. I put a video in the Animate and assign controls for buttons (for example, replay video from 0:00 sec). For stage and video autoplay function are disabled.
Then I export the oam-file and insert it into the Muse with a Scroll Effect "Edge Animate" (Autoplay) to play the video at a certain point. Video starts correctly, but some controls doesn'n work, for example, "replay video". Along with this function "Toggle video play/pause" works correcly.
Actually, I want to loop video playback but it doesn't work in the Muse (Loop function for a video).
Can anybody recommend a solution?
Thanks!

Hello Joe,
This is very interesting, but when I upload the project from Muse to my FTP-server, everything is working properly in all of browsers, all of controls and loop for the video clip. I found it by accident when I lost all hope. In other words, the problem is only when previewing the page in a browser (via the built-in local server). Maybe this is a question for the team Muse? Anyway I can send it in PM.
Thanks for your reply,
Alexander

I upgraded my iMac to 10.9.4. Now the feature where you can go to 4 diff. screens (Command+Control) doesn't work. How do I fix this?

I upgraded my iMac to 10.9.4. Now the feature where you can go to 4 diff. screens (Command+Control) doesn't work.
How do I fix this?

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

My i pod nano first generation doesn't work with windows 8

My i pod nano first generation doesn't work with windows 8

Howdy yvesmd,
Thanks for using the Apple Support Communities.
If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
Apple - Support - iPod - iPod nano Troubleshooting
Cheers,
Alex H.

TS3704 How are you supposed to fix "The feature you are trying to use is on a network resource that is unavailable" alert appears when you remove Apple software in Windows if it doesn't work on Windows 8 or 8.1???

How are you supposed to fix "The feature you are trying to use is on a network resource that is unavailable" alert appears when you remove Apple software in Windows if it doesn't work on Windows 8 or 8.1???

See Troubleshooting issues with iTunes for Windows updates. You may have to uninstall what you can, reboot and delete the named folders, then reinstall.
tt2

"Email me" doesn't work in Windows

Has anyone found that the "Email me" button doesn't work on Windows machines? I have just been told by one or two visitors to my website (www.aroundthebusch.com) who use Windows that the buttons didn't work.

It may be a Flash Security issue... upload SWF to server, open it to browser from there and try your links again...
Here´s one SWF exported from indesign (links to email at page 3):
http://www.edocker.com/_demo/edocker-online-demo/index.html

AT-AO-10 doesn´t work with Windows 2000

I have an AT-AO-10 board that doesn’t work with Windows 2000. I have reserved two IRQs for legacy devices (non plug and play) in BIOS. The AT-AO-10 has got assigned these IRQs, a DMA and a base address that are free, and there aren’t any hardware conflicts, but the board doesn't pass the MAX's text.
In Windows 'Information System', the board is shown in 'Forced hardware', but I don’t know that is a problem.
If the board is unplugged, error messages are the same.

Hello;
You didn't mention what version of the NI-DAQ driver you are using over there. Anyway, my suggestion to you is to uninstall the NI-DAQ driver you have installed, remove the board, reboot the machine, download and install the latest NI-DAQ version (6.9.3) from NI web site.
Try the installation with the new driver, and if that is still not working, the best bet is to try the same installation on a different machine to double check if the hardware is not defective.
Regards
Filipe A.
Applications Engineer
National Instruments

Application Restart and Recovery APIs doesn't work for windows services

I am using the Application Restart and Recovery mechanism (provided in Windows API Code Pack for Microsoft.NET Framework) to collect some information (i.e. stack information when there's an unhandledexception) before my windows service crash down.
It works well for windows form applications, but the callback method wouldn't be called if the host is a windows service.
I have checked the article: https://msdn.microsoft.com/zh-cn/subscriptions/downloads/cc303708
But it doesn't specify clearly whether it works for a windows service. It seems that the recovery will only be activated when the user interacts with the error dialog of Windows Error Reporting (clicking "close" on the dialog, for example).
So I am wondering is my guess right that the Application Restart and Recovery mechanism doesn't work for windows services. Or is there a better way to meet my requirement?

I would suggest trying ARR if that's what you want to use. The restart portion won't work, but it doesn't need to as if you fail out of your service, the Windows service controller will handle recovery (up to and including restarting your service).
You configure those recovery actions either through code or one of the built in administrative tools for services such as services.msc.
DebugDiag/ADplus and similar tools ultimately do use built-in APIs; you don't need to add anything external to collect debugging information. You do however have to write a good deal of code to do somethings. It's pretty simple to use the unmanaged
function that I pointed out before and
MiniDumpWriteDump to write a minidump when you hit an unexpected error(the dbghelp.dll that comes installed with Windows has it so you don't need anything additional installed). You can even write a basic debugger that literally debugs a process using
only kernel32 functions (see
https://msdn.microsoft.com/en-us/library/windows/desktop/ms679301(v=vs.85).aspx if you're interested).
WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

Hi candy, glad that you found that Shockwave Flash Object, it works with the Flash files and is very important
The NPSWF files that you said are not there, those are for the Firefox browser or Chrome or some other browser. If you use Firefox and want the Flash Player for that, then close all of your browsers so you are only looking at your Desktop.
Click on this Flash Player Installer for Firefox and SAVE it to your Desktop. Then RUN it from your Desktop, and after it is finished Installing, Restart your computer.
Then Using Firefox go to the plug-ins and find a SWF vs 10.0.45.2 and make sure it is Enabled. This is just like the Shockwave Flash Object for Internet Explorer, but it is the one that works with Firefox.
Let me know if that is what you wanted to do. If you don't use Firefox, but Chrome or another browser, then this will work for that one also.
If you don't use another browser, then don't do any of this. I just thot maybe you did and that is why you were concerned that the NPSWF files were not there.
Thanks,
eidnolb

Satellite A210 (PSAEG) - Microphone doesn't work on Windows 7 64bit

Hello, the micro doesn't work under windows 7 64 bit, the driver I'm using is Windows Vsta 64 bit. The volume is set up maximun and so is the amplification but no way to make it work with skype or toshiba camera assistant software.
Can anyone help me?
thank you

Hi Largo09,
Usually you have to install the webcam and sound driver to get the microphone working. The microphone is a part of webcam
As you wrote, Satellite A210 is not Windows 7 64bit supported so the only option you have are Vista 64bit drivers
In my opinion you should check if Microphone is enabled in Windows sound settings. There you can also enable Microphone boost, that can increase the microphone volume.

HP Deskjet 2512 Director doesn't work on Windows 7? Is there a fix?

HP Deskjet 2512 Director doesn't work on Windows 7? Is there a fix? All that happens is two text pages open, but no Director. I have downloaded and installed latest full software version DJ2510_1313. Any help for this?
This question was solved.
View Solution.

Hi DJ2512,
I understand you have a Deskjet 2512 that is not able to open the Printer Assistant, it opens to text pages. I'm sorry to hear this, but I will definitely do my best to assist you!
From what you've described, it sounds like your Printer Assistant is opening to a Notepad page. I'd suggest that you follow this HP Printer Assistant Opens with a Script Error or in Notepad document to get the issue resolved.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

ActiveX control is not working with windows NT

I've have a stand alone application which uses an activeX control. The application was compiled using Labview 7.1 on a Windows XP machine. The application will run without any problems on Windows XP and Windows 2000, however the activeX control will not work with Windows NT 4.0. The activeX control is registered, and I have also compiled the application on a Windows NT 4.0 machine. I do not receive any error messages, the application will start but will not communicate with the activeX control. Does anyone have any suggestions?

Hello,
Have you tired running the VI by itself (not exe) on the NT machine? Make sure you are doing adequate error checking in your code. It could be possible that the application is generating an error which in not handled appropriately. Also which service pack do you have installed on the NT machine? Please look at the release notes for LabVIEW 7.1 here.
Regards,
Chetan K
Application Engineer

Tap-to-Click doesn't work on Windows 8

Hi all. I'm using bootcamp for two weeks, and Trackpad's tap-to-click feature doesn't work on Windows 8 x64. Can you help me please? Thanks a lot.

Aah, thanks a lot. That's so easy.

HP OMEN Control doesn't work on windows 10

Similar Messages

Maybe you are looking for