HP Omni 220-1050xt Monitor goes blank at random times and will not light up.

Recently my computer screen starting going blank without any warning.  One minute it is fine and I am working away, then the screen turns black and no key sequence will bring it back.  I have selected a power scheme that has never, never, never set in the categories.  I also sent my screen saver to None.  I took it to Staples to run a diagnostic which responded with no errors.  Within 15 minutes of running, the screen was blank and the computer was unresponsive.

Hello @jlh41,
I understand that you are experiencing an issue where your HP Omni 220-1050xt Monitor is going blank without warning. I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try different cables between your computer and monitor.
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

  • Dual monitors go blank at random times

    My mid-2010 Mini works fine, but lately my dual Dell monitors have started going blank at the same time. The only recourse is to power down the Mini and restart and the monitors come back fine. This has happened twice just today. A few months ago I went through a period where one monitor would go blank. That seemed to cease, but now both will go blank at random times.
    Any updates on this problem?
    Tx,
    WK

    First try resetting the NVRAM / PRAM, as per > About NVRAM and PRAM
    Then what connections and adapters are you using..?
    I have the same 2010 Mac Mini w/8GB RAM set up using dual 21.5" Samsungs DVI monitors. One is on the Apple Supplied HDMI to DVI adapter and the other is on a Kanex Mini DisplayPort to DVI adapter. I'm using the Kanex adapter, because I had nothing but the same trouble that you are describing using other Mini DisplayPort to DVI adapters including a couple of Apple branded ones. 

  • IPad2 hangs during eBay search. goes to middle of page and will not allow you to go forward or back, but returns to the middle of the page. mouse can move cursor, but it goes back to the middle of the page. deleting app no good. only during search.

    Ipad2 hangs during ebay search and only during ebay search. goes to middle of page and you can move the mouse anywhere but the page returns to the middle of the page it jammed on. you can do other ebay things and no problem, just hangs during item search. deleted ebay app and reinstalled. same thing occurred again. can search with Safari. can go to other shopping pages and search is unhindered. this one has stumped the pros. need help. thanks.

    How are you using a mouse with an iPad?

  • HT4061 My IMEI 01 295800 500762 5 My Apple ID is going back to old one and will not let me sign in to my iCloud account or my old my old either unable to update or purchase apps. you have sent me steps to ake off devices but my manage account page does no

    My old iTunes account is now showing up when I try to update Apps or purchase. Not able to sign in at all. Notified you of the problem and was sen steps to take off other devices but from my manage account setting I do not hae the option. My old account is [email protected] please help.

    https://discussions.apple.com/message/20931060#20931060

  • Can't get online. Error message says current status is "offline." I uncheck "offline" in the File Menu but it goes back offline again immediately and will not stay in online mode..

    '''bold text'''

    Thanks for the response. Unfortunately, things have gotten progressively worse now in another direction. After I posted this, I shut down my computer to go to work. It had to "rebuild" the filevault sparseimage to recover space.
    Now when I restarted it, I am missing things from my dock, ? marks are in their place, all of my preferences have been set to some default AND this is the biggie - I have no mail accounts whatsoever. When I click on Mail, it asks me if I want to establish a new account. It looks like the FileVault action has totally screwed up my system.
    I tried rebuilding the permissions as recommended above using safe boot. Didn't help. I am now trying to repair the FileVault sparseimage as recommended elsewhere. I think I now see what the problem might be. I have two different sparseimages for the same account with the only difference is that a 1 is appended to the second one. Unfortunately I can't tell which it is. I have a feeling I should repair the 1st one (without the suffix 1). It must not be able to open that and hence that is why it made a second one.
    Any other help anyone?
    Nick

  • My iMac (10.6.8) goes to sleep and will not wake up without a hard reboot.

    My iMac (10.6.8) goes to sleep after 2 or 3 hours (even if im working at the time) and will not wake up without a hard reboot. 
    Any suggestions would be very much appreciated.

    What all USB or Firewire devices do you have connected?
    Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if sleep/wake works OK in Safe Mode.
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
    next...
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964

  • Pavilion f1703 monitor goes blank 2 seconds after start-up

    When the computer is turned on, the monitor only functions for a couple of seconds before it goes blank..power light shows it to be working.
    If I turn the monitor off at the front power switch, and turn it back on, the same thing happens..2 seconds of normal then blank.
    In the couple of days leading up to this, the screen had a slight "flicker" effect going on.
    All ideas greatly accepted!!

    I am having the identical problem.  I hooked this monitor that a friend gave me and it worked great for several days.  There were no flickerings or any indications of a looming problem.  Then it started going blank after 2 secs and continues to do that.  I did see a warning about the "power saver", or something like that, was in operation.  Unfortunately, I can't get it to stay on long enough to go into the menue and see if there is anything I can change there.  Any help would be appreciated.

  • Hp w2338h monitor stays on for about a sec then goes black and will not come back on

    When I turn my computor on the monitor will only stay on for about a sec and then goes black. I can turn monitor off and on and it does the same thing. A new motherboard and been installed and computer works well with other monitors. Was using upgraded video card which has been removed and using orginal video card that came with computer. The monitor started acting up and before new board installed and would come on when monitor was turned off and then on. Now it just stays black after being rebooted or turned on. Can anyone help or have any ideas what could be the problem?

    Hi charlezr,
    I see that your monitor goes blank after you start up the computer, and I would be happy to assist you! To begin, I will need to ask you a few questions:
    What is the Product and Model Number of your desktop computer and monitor?
    What version of Windows do you have installed on your computer?
    Is this an on-going, or recent issue?
    In the meantime, I recommend following this document on when the Monitor or TV is Blank after Starting the Computer. This should help you determine if the blank screen is being caused by the computer hardware, the video signal to the monitor, or the monitor itself.
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

    Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

    Yes, your battery is likely toast and in need of replacement.  Not much else for troubleshooting here.  Sorry.
    B-rock

  • Imac 27" Intel Core 7 CPU. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware scan and all is fine. Did clean wipe from Mavrick back

    Imac 27" Intel Core7  CPU 16 Gig RAM. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware diagnostic and all is fine. Did clean wipe from Mavrick back to Mountain Lion but problem remains. Apple Store can do no more.

    I did some more digging, it appears to be a backlight problem only. I can see the screen very dimly if I use a bright flashlight in a very dark room. It also seems to run ok if the brightness is turned down a LOT.
    So I'm thinking this is a LED driver board issue or the display itself. I'll open it up and check the connection between the two and see if I can get any more clues. At least I can use it somewhat now by dimming the display significantly...

  • Monitor goes into sleep mode and will not wake up

    My monitor goes to sleep and will not wake up.  I try powering off and that will not respond.  I have to unplug the workstation and start back up.  I have turn off sleep to never sleep and now it just goes to sleep when Im working. 

    Hello @rosendahl14,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your monitor goes into sleep mode and will not wake up, and I would be happy to assist you in this matter!
    To rule out any sleep mode issues with the monitor, I am providing you with some steps you can try below:
    Step 1. Unplug the power cord from the back of the monitor and the wall
    Step 2. Hold the power button down for at least one minute
    Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
    Step 4. Press the Menu button on the monitor
    Step 5. Navigate to the Factory Reset option and select it
    Step 6. Try a different cable connecting your monitor to your computer
    If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    To further diagnose a possible hibernation issue with your desktop, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). I also recommend following the steps below to reset your system's power management settings:
    Step 1. Click the Start button
    Step 2. In the search box, type "Command Prompt"
    Step 3. Right-click Command Prompt
    Step 4. Click Run as administrator
    Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter 
    reference: http://superuser.com/questions/669571/windows-8-1-​64-bit-power-schemes-gone
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • My i pod 4th keeps going to the turning on screen then in goes blank then flashed white and it keeps doing that              can someone help me please

    my i pod 4th keeps going to the turning on screen then in goes blank then flashed white and it keeps doing that              can someone help me please      
    does any one have any idea what i should do it has been jailbroken for 3 months now i downloaded android lock and it started doing this

    That happens sometimnes with jailbreaking.
    Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
      Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

  • I am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

    i am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

    The warranty for the iPhone is not and has never been International.
    Warranty and support are ONLY valid in the country of origin.  The only exception is the EU where the entire EU is treated as one country.
    If the device will be used in India, buy it in India.
    An unlocked iPhone will work on any supported GSM carrier world wide.  The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries.

  • My iPhone is fully charged and just gives me a blank screen and will not turn off, what do I do?

    my iPhone is fully charged and just gives me a blank screen and will not turn off, what do I do?

    Reset the phone like the manual says:  hold the on/off switch and the home button simultaneously until the Apple logo appears.  May take up to 30 sec

  • Time Machine will not let me restore from backups after June, 2013.  I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

    Time Machine will not let me restore from backups after June, 2013.  I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

    rtilghman wrote:
    telling me to buy a new router is NOT a solution.
    And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
    Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
    What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?

Maybe you are looking for