HP Pavilion a1210n with Windows Vista 32bit. looking for audio drivers. Can you point me to a link?

Hello,
I have an HP Pavilion a1210n running Windows Vista 32bit. I'm missing the audio drivers and can't seem to find them. Can you point me to a link for these drivers?
Thanks, It's much appricieated!

I found this link but it doesn't talk about audio drivers in the multimedia package. Am I missing something? Does Vista need to have all OS updates installed for this to work?
Thanks again!

Similar Messages

  • Protools 8 compatibli​ty with Windows Vista and which proper audio interface?

    O K i have a compaq presario pc notebook with a cpu of 2.16 ghz and 160 gb(?) hard drive with 32 bit w/ Window Vista service pack 1. I've done a little research and it seems my computer may be compatible but i'm not sure  Is ne one using pt 8 with windows vista with no problems? also i'm not so sure about which audio interface i should be using psi, firewire,or usb even though i have 2 usb ports im hearing  its not the best choice dealing with latency and all. Is ne one using pt 8 with window vista using a usb audio interface or even firewire with any problems? thanx hope to hear from you soon!!!!

    Hi again chamille2010,
    Well my take would be that your rig would run Pro Tools 8 but you might struggle with the latency a bit.  I ran Pro Tools LE on a PC (with significantly lower specs than yours since it was 3 years old at the time) with a Digi 002 as my firewire interface and I did have issues with latency, which is my biggest pet peeve.  That was also on the XP Operating System so you might be better off with Vista SP1.  I would recommend going with the Digi 003 via firewire and maxing out your RAM for best results.  USB would definitely be slower and might be a cause for latency if you run into it. 
    That's my opinion.  Digidesign has a pretty in-depth site for making sure your system will run Pro Tools.  I'm sure you've already checked it out but just in case:
    http://www.digidesign.com/index.cfm?langid=100&nav​id=54&itemid=23954

  • Trying to restore from time capsule to nes hard drive, keeps looking for disks ! Can you help

    ccan't restore from time capsule to new hard drive, after changing to new HD, after calculating required space to restore it keeps looking for disks! Have have put original OS X  install disk 1 in it won't Eject , any help

    The very best way to do this is with ethernet to the existing router. Put the TC in bridge mode manually.
    Then plug it in to existing router.. we recommend LAN router to WAN on the TC but even that is not 100% necessary.
    If you want to link by wireless, to a non-apple router that is bad.. recommend strongly against it. Join a wireless network is super slow.
    If you have a desktop Mac you can plug it directly into the Mac by ethernet.
    But we need to know how the Mac is connected to internet.
    I have given some info on one layout here.
    https://discussions.apple.com/thread/4817218?tstart=30
    If you end up relying on an old TC. And any of the models from Gen1-3.. and increasingly Gen4 have all reached EOL.. they can die suddenly and either take your files with them or be hard to recover. Also a TC is slow cf a USB external drive even, which is more reliable. Considering a 2TB is <$100 I would be careful using an old TC simply because you got it free.

  • My HP Pavilion a6357c with Windows Vista 32-bit freezes until the system warms up

    Any time I start the computer up when it hasn't been used, the system fails to boot.  It will freeze up in the process where I have to hold the "ON" button down to shut it down and then attempt to reboot.  the system will freeze just about anywhere in the process.  Sometimes I get to log in with my user name, and then the screen will freeze up.  Sometimes trigger a blue screen, sometimes a black screen and then perform a hard disc diagnostic routine.  Once whatever component warms up, the system works great. 

    I am not that familiar anymore with troubleshooting Windows XP, but way back in the day I seem to recall that the Windows recovery console would be used to fix issues like the one you're describing. It sounds like you may have a corrupted boot sector if it keeps going into the windows recovery mode.  The solution could be as simple as using the last known good configuration or possibly doing a system restore.  You may want to try this link on Technet that explains the recovery console and the tools available in it like fixmbr..
    http://technet.microsoft.com/en-us/library/bb45712​6.aspx
    Worst case you may be looking at doing a reinstall of windows XP.
    I am an employee of HP

  • MOVED: Microphone not working on P6N Diamond with Windows Vista 32bits Premium

    This topic has been moved to Vista problems.
    https://forum-en.msi.com/index.php?topic=114047.0

    "What a hassle" doesn't do creative's utter uselessness enough justice.
    I don't know what to say except you seem to have done all the right things to try and get your mic working. I've just been through hell and back trying to fix mine. Not just my mic either, if I was in-game or just in Team Speak...video files or music files would not play. Other than that If I was in Team Speak and I loaded up Crysis I would get no sound, and get this... If I loaded up Crysis first and alt-tabbed out to join Team Speak It would say I had no playback or recording device. GOD!
    Also apparently there are addressing issues with 64bit systems that have 4GB RAM or more, have to read into it a bit more, sure there are threads in these forums about it.
    However for whatever reason, after much stuffing around. I have installed the Vista drivers off the CD (although im running w7 64bit) that came with my card and I'm no longer getting the above issues except now my sound is rediculously soft and so is the bass.
    This is what I tried.
    . Installed latest drivers from the driver support area.
    2. Installed Dan K's support pack
    3. Tried booting with 2GB of RAM
    4. And lastly which I mentioned worked for some reason...installed vista drivers that came with my card.
    Perhaps its worthwhile to install whatever drivers you tried again, but try booting into safemode first and use driver sweeper once you've uninstalled the software/drivers you have at the moment.

  • ERROR 1002 WHILE ROCOVERY DISK HP G60-441 US WINDOWS VISTA 32BIT

    I HAVE HP G60-441US MODEL WITH WINDOWS VISTA 32BITS, PRODUCT NUMBER NW142UA. I TRY TO MAKE ROCOVERY DVD DISK WITH RECOVERY MANAGER BUT IT IS FIALED ON 2ND DVD. THEN I TRY TO RECOVERY WITH RECOVERY MANAGER IT SHOWS ME ERROR 1002 WHILE I PRESS OK ; COMPUTER IS RESTARTED AND BOOTMGR IS MISSING PRESS CLT+ALT+DEL FOR RESTART. AFTER THAT I CHECK HARD DRIVED MEMEROY IT IS ALSO FAILED. AND WHILE STATING COMPUTER IT SHOWS ME TO REPALCE  BATTERY.
    I DID ORDER RECOVERY DISK FROM HP SUPPORT AND REPLACEMENT BATTERY. IT TAKES ONE WEEK TO GET IT.
    NOW I WANT TO KNOW THIS IS HARD DISK PROBLEM OR JUST SOFTWARE PROBLEM. I TRY TO DO FORMAT MY COMPUTER DUE TO BAD PROFORMANCE, TAKES TOO LONG TIME WHILE STARTING COMPUTER AND IT IS FIALED ON WINDOWS UPGARDING AND CONFIGURING.
    THANKING YOU.

    Hello kmdavis. I have read the issue you are experiencing. Your computer is experiencing a hardware failure, and you should contact HP technical support for further assistance. Their options will be based on the warranty status of the computer. If you do not have this information, you can locate it at this website: http://h20566.www2.hp.com/portal/site/hpsc/public/​wc/home?ac.admitted=1384280905804.876444892.199480​...
    You can utilize this website to learn how to contact HP appropriately, based on your region: http://www8.hp.com/us/en/contact-hp/ww-contact-us.​html
    Please let me know if you have any other questions or concerns.
    Mario
    I worked on behalf of HP.

  • Cannot install sofware for HP Office jet 8625 Pro on my Dell Inspiron 15 with windows vista?

    Cannot
    install
    software for HP Office jet 8625 Pro software on my Dell Inspiron Core 2 processor with Windows Vista?

    Hi @akcarl 
    What happens when you try to install? Does it freeze, do you get an error message, or perhaps you simply can not find the appropriate software to download?
    Please post back with some additional detail so I can better assist you. Thanks.
    In the meantime, if the issue is nothing but finding the software, you may use the following link; OJ8620_198.exe
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • I have a hp pavilion dv 9260 nr laptop and looking for recov. sys. cds windows vista alt 64b

    i have a hp pavilion  dv  9260 nr laptop  and looking for recov. sys. cds windows vista alt  64bit anybody can help? please. 

    You can phone HP to order a set.Choose your country here> Contact HP
    Or they are here>>http://www.computersurgeons.com/SearchProducts.aspx?sbt=dv9260nr&bkm=Results#Results
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Hp pavilion dv6-1030us with windows vista 64 bit now upgraded to windows7 32 bit.

    hp pavilion dv6-1030us originally with windows vista 64 bit now upgraded to windows7 32 bit. mic is unable to send sound in skype after upgradation.
    This question was solved.
    View Solution.

    Hi,
    Try the following.
    First, uninstall Skype and when this has completed, restart the notebook.
    When windows has reloaded, download and reinstall the Chipset driver Here.
    When the installation has finished, restart the notebook again.
    Let windows fully load, then download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45044.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery, plug in the AC Adapter and start the notebook.
    Let Windows fully load, then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again.
    Reinstall Skype and see if the Mic now works Ok.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Hp zv5242qv laptop with windows vista will not run on battery but will run on power adapter

    Hello, I have a HP zv5242qv pavilion zv5000 series laptop with windows vista installed. I can run it on the power adapter with and without the battery installed but it will not power up on just the battery, the battery is new and fully charged. When I plug in the power adapter the battery light on the front of the laptop comes o then goes off, anyone have any ideas about my problem ?

    Hello,
    The situation you describe looks like the unit has problems with the battery, but you say the battery is new and is fully charged.
    Then, the issue might be with the system board and maybe there isn't anyhting you can do.
    You can try to remove the battery and the ac adapter, and keep the power button pressed for 30 seconds, then connect the ac adapter, turn on the unit, then when in windows put the battery in place, see how it is detected, the power level and restart the PC. See if the unit restarts with the battery in place, if yes, then shutdown the unit. 
    See what happens and report back.
    Thanks,
    I work for HP! Please remember to provide and if this helped click ON

  • Ipod touch with windows vista

    Hi,Im looking into geting the ipod touch,but I have read that the ipod touch does not work well with windows vista. I know the new itunes 7.5 just came out. Has that version fixed the problems with the ipod? Also what are the problems the ipod touch is haveing with vista. I have windows vista 32 bit OS. Thank you very much for your help.

    Hey, yeah I have major problems syncing to Vista. The album artwork is assigned to the wrong songs or sometimes a chunk of the picture is not in the right place, some of my songs stop half way through the song then the iPod skips to the next song on the list. My movies periodically decide to crash and the only way to get past these spots is to skip ahead (which is very difficult on the iPod touch especially when the movie is long cause you dont want to miss too much) but yeah just letting you know that there ARE some issues with it not saying that yours will do the same but it might.

  • HT1339 my ipod shuffle(1st generation) is corrupted (error 1442) it will not restore.             is it possible to correct this or is it beyond repair. It worked the last time I used it on my laptop with Windows Vista. Vista.

    My ipod shuffle (1st generation) will not restore. It says it is corrupted(error 1442) Is it possible to correct this problem, or is it beyond repair. It worked last  time I used it on my laptop with Windows Vista. Any help would be much appreciated.

    Im actually tilting it up where it cinnects to my iPod, not where it connects to my computer, and i have tried three(yes, 3) different cables, one of which i bought brand new. still nothing, and i've also tried different USB ports on my computer,....nothing. Could this simply be a hardware failure of somekind? maybe a physical problem...i mean, why would i have to tilt the cable in order for my computer to actually read my iPod? im looking at the USB connector on my iPod (maybe it's my imagination, not sure) it possible might be bent, the little metal part in the port.

  • Error when installing itunes version 9 on Windows Vista 32bit

    When trying to install itunes version 9 an error has come up before the installation is complete.
    The error reads -
    An error occurred during the installation of assembly
    'microsoft Vo80.CRT,version = "8.0.50727.4053,"type="wn32",publickey token=1fc8b3b9ale18e3b" process or architecture="x86"
    HRESULT.0x800736133
    Can anyone help me - I am using windows vista 32bit. Have tried turing off ALL security and reinstalling as someone else suggested previously. But still have had no luck
    Thanks

    Thanks Emma!
    Ox800736B3
    Not a lot of documentation on that one, I'm afraid, but there's some general principles troubleshooting we can try with it that might get us moving forwards.
    (1) Do you currently have a copy of the Microsoft Visual C++ 2005 Redistributable Package installed on that PC? If so, try downloading the following security update:
    [Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update|http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-4 0ff-b072-9112bab119c2&displaylang=en#filelist]
    Does iTunes install for you after applying that update?
    (2) If no joy there, head into your Windows Update and click on the Update History. Have a lot of Updates also been failing for you recently? If so, doubleclick on the entries for the failed updates to bring up more information on each. What error codes appear for you for the failed updates? (Precise spelling, please.)

  • Itunes 8 - issues with Windows Vista

    I have recently bought a new laptop with windows vista home basic. Downloaded Itunes 8 and installed it ok, but when i go to start itunes, it starts in a minimised screen and I can't see the any of the buttons along the top (file, edit etc..). When the screen is maximised, the appearance is ok. But there is a problem with language in the play-lists - the playlist titles are in another language (Looks like Swedish or Finnish).
    I've checked all the language settings in itunes and in the operating system too and they are all set to English. Has anyone come accross this problem before? Is this a known issue with Itunes/Vista?

    I am having the same problem regarding the playlist languages, as well as other aspects. For example, my library name under preferences is not in English. Have you resolved the issue? I have checked all of my itunes and computer language settings and they are all set to English. I even changed my computer settings from Canada to US so that they are all the same.

  • DESPERATE! IPOD NOT SHOWING IN ITUNES WITH WINDOWS VISTA.

    I recently bought a new Dell Dimension E520 which came with windows vista pre installed. I seem to be one of many people having problems with it!
    Newest version of Itunes (7.1) is installed and working fine. When I plug my IPOD nano in however nothing happens. It is visible in the device manager on my PC but doesn't show in itunes.
    I've been to the apple store and they said that the new itunes should fix the problem but it hasn't. they've checked my nano and it is fully up to date.
    I know it is a driver problem but i have absolutely no idea what i'm looking for when i go to the support section on this website!
    the reason I bought a new PC was that my old computer wouldn't download the new itunes and therefore i couldn't access the store or any songs bought from the store on my nano (plus it was 14 years old). it did however actually recognise my IPOD!
    It's been nearly 6 months since i've been able to update my ipod with songs and i'm getting desperate!!!! please can anyone help??

    iTunes does not yet support Windows Vista. There are numerous problems running iTunes on it. The latest release of iTuens 7.1 fixed some of them but not all.

Maybe you are looking for