Hp Pavilion dv4 Fan doesnt work properly

I cleaned the fan in my laptop, it was making big noise. I cleaned and put it again, there is no noise now but I think it works slow speed so my laptop is heatining in a few minutes. What should I do? let me replace to a new fan? also i dont know exactly heat sink, what is that? how can i understand what is the wrong at the fan? it looks like properly works when I take it out

do you have a comment about trade mark of a fan so i wanna get the non-quality one.
When i look it the fan, It looks like works normally, Is there any way to understand its wrong?
somebody says replace heatsink, i dont know about it, What is heatsink? should i replace it?

Similar Messages

Replace content smart objects doesnt work properly.

Hello fellow Photoshoppers,
Currently i am working on reusable album templates with smart objects. At first i was very enthusiastic but this was soon to end. as the replacing doesnt work properly.
I made the smart object by using:
1. > file
2. > place
then i try to replace the content by using.
1. > layer
2. > smart objects
3. > replace contents
the old image should get replaced by the chosen file and matching size, smart layers etc. However when i perform the same actions my image gets replaced but it is not the same size as the smart object it replaced. This makes the entire template useless as it would take far too much time resizing every single image. inspired by another video I also tried double clicking the layer and tried replacing the image in the editing sceen by dragging another file on top of the smart object. Again, it does not spread out to the full smart object size and i'm stuck with a small image in need of extra work.
Needless to say, very frustrating.
Any thoughts?

Are you sure you understood how it is intended work?
That is an interesting question, i have no experience with photoshop as i bought CS5,5 just a week ago and have no experience with any of the previous versions either. All info regarding how to make such a template i found from various tutorials, i posted one below. When they do it the image get scaled perfectly. Now since they use some smart filters in the tutorial i applied them aswell to see if this would fix the problem but it did not.
http://www.picturesocial.com/video/wedding-photo-album-templates
Are the images you want to switch in at least always of the same width to height-relation?
I checked both files for consistency and discovered they were shot on different camera's. One file ( the origional smart object ) was cropped form a 21,0MP file and the other was croped from a 10,1 MP file. Both images were cropped to a 2x1 ratio. Having discovered the difference in pixel amount i cropped a different 21,0 MP file to 2x1 ratio and checked both files for their exact dimensions (both images are equal in size with 5616 x 2808 pixels) and replaced the content with the newly cropped file which gave a much better result. However, the image was slightly smaller in photoshop leaving a small gap where the origionally placed smart object lined up perfectly. I turned the situation around and placed the 10,1MP cropped image as the smart object and replaced the content by a 21,0 MP cropped image. As to be expected i ended up with a new image much larger then the smart object. So the smart object does not constrain the files to the dimensions set. As it turns out it only scales the replaced content relative to the size of the origional content of the smart object.
I just need a reusable template with objects that:
- cannot be moved once locked ( if possible) but can have its content replaced
- scales the replaced content to the predefined dimensions
- needs no prework like cropping to the same aspect ratio as the smart object content. ( i want to be able to place a landscape sized raw (3x2) on any landscape format (2x1 / 16x9 / 4x3 or whatever) i find it acceptable to having to crop a portret to landscape orientation first before being able to replace a landscape.
now ive been searching for more info and some people say indesign is much faster in making album pages so I am installing the program as we speak hoping this will be the solution.

Keypad doesnt work properly

my iphone keypad doesnt work properly the last row where the space bar and the button to switch to numbers doesnt work

Standard troubleshooting steps in order are power the iPhone off and on, Reset, Restore and if not change after any and all, make an appointment at an Apple Store if there is one nearby or call AppleCare - (800) 694-7466.

Ejecting external discs doesnt work properly, no spin down of disc. why?

ejecting my external discs doesnt work properly anymore in 10.6, no spin down of disc happens, the finder unmounts the disc(s) and then the disc spins on and on. thats weird, because, in 10.5 i ejected discs and then they went spinning down the drive, as it has to be.
when i unplug the disc, which is unmounted from desktop, and still spinning, it makes a terrible noise in the disc. like a high pitched short tone.
any idea whats going wrong here?
thanks!

you probably mean "causing the fail to spindown"
you maybe mean software like techtoolpro5 or drive genius3?
yes i disabled these helper apps on the discs, but first i used it (like monitoring
all discs if they are nearly full, or working s.m.a.r.t and so on. yes its useful,
but obviously it causes problems. i must mention, that i tested my 4 external drives again,
and i found out that i can eject all discs, like said before, but only 2 of the discs are spinning down, after ejecting, BUT only when i use the button "eject" in harddisctoolkit, they dont spin down, when ejecting from desktop (apple+E), and the other 2 of the 4 drives refuse to spin down, after ejecting, even with pressing eject in harddisctoolkit....
i can also state, that these 2 discs, which refuse to spin down, are FW800/400 discs and connected via FW800. and the 2 discs which spin down succesfully are UBS2 discs, if thats worth mentioning...
Message was edited by: purepeter

My GX630 doesnt work properly on Windows Vista 64 bit

Hi,
I have problem with my GX630, its doest work properly at W Vista 64 bit, exactly Sleep mode ... its imposible to awake my computer nd I have to turn it off and than on to wake it up ...
those buttons Turbo nd Eco mode doesnt work.
sometimes happen that i get blue error screen and reset but I dont know why ... it wrotes something with some .dll file ...
some people told me that its error is caused by that thing that there are no drivers for 64 vista yet ...
I would be pleased if someone could help me up to this topic or to my email (removed to protect user privacy) or ICQ (115-378-414) thank to all of you Jabu

"sometimes happen that i get blue error screen and reset but I dont know why ... it wrotes something with some .dll file ... "
What is the BSOD error code? What .dll ? Write down the exact error.
Do you OC your notebook?
"some people told me that its error is caused by that thing that there are no drivers for 64 vista yet ... "
Install Drivers from MSI web:
http://global.msi.eu/index.php?func=downloaddetail&type=driver&maincat_no=135&prod_no=1513
"those buttons Turbo nd Eco mode doesnt work."
You need SCM: http://global.msi.eu/index.php?func=downloaddetail&type=utility&maincat_no=135&prod_no=1513
But x64 bit is N/A.
Why you use x64bit version anyway? Why not 32bit?

Error 90B - Fan not working properly?

Hello, this is my first time here so please excuse me if I posted this in the wrong section.
First, general specs:
HP Pavilion dv6 Notebook PC
Windows 7 Home Premium 64-Bit
BIOS: InsydeH20 Version CCB.03.61.09F.21
Processor: AMD A6-3400M APU w/Radeon HD (4 cpus ~1.4GHz)
6g RAM
(If anything else is needed to help me ask, and I shall post it)
Last week I received an error 90B for my laptop's cooling fan. I was playing Guild Wars 2 and in the middle of playing my laptop shut down suddenly. When I turned it back on it presented the error I'm asking about. The thing is, the system wasn't overheating in the slightest and the fan was working just fine before it shut down. I've tried many fixes proposed on HP's website and from a couple of friends:
-Compressed air blown into the vents
-System restore to a point where the fan worked
-Hard reset
-BIOS update
None of those proposed fixes worked. However, I did find something that fixed it...for about ten minutes. I fiddled with the Catalyst Control Center and set my CPU power back to its default 1400 MHz, and I shut down my system. After I restarted it I miraculously didn't get the 90b error! You could imagine how happy I was. I shut it down one more time to see if the error was truly fixed, but lo and behold it showed up again.
The only change that could have caused the issue was me downloading a program called SpeedFan to monitor my system's temperature (I did NOT (I repeat, DID NOT) change any settings using the program - I purely used it to monitor the temperature.)
I cannot afford to have a repairman replace or look at my laptop as of now, we have bills to pay and food to get, and I absolutely NEED this computer to function. I have work to do, and classes to sign up for, and we have no public computers for miles. Please help me!

Not every fan error is a heat error. There is a sensor that detects a bearing that is wearing out or spinning that is out of round. You can sometimes limp it along for 6 months before the fan absolutely has to be replaced. When it does you will not be able to get past the error.

Geforce 295GTX doesnt work properly.

I've bought a new 295GTX MSI. I uninstalled my previuos video card drivers, plugged in the new card. Everything boots up wel but once in windows Vista it detects the new hardware but could not recognize it. I installed the Nvidia drivers, they install fine but it's like it doesnt detect the card either. When i go and look to the properties its still using the default vista vga drivers. When I look at the properties there are only questionmarks at the brand name, chipset,... .
I reinstalled Vista but i still get the same bug. Tried it in Windows 7, still the same bug.
Tried it in another computer, still the doesnt work.
P.S.: All power cables are properly connected.
What can I do?

Hi Hansie! Give this a try; In 'Change or Remove Programs' (not sure if it is called that in Vista), Uninstall NVIDIA PhysX (if installed), NVIDIA Performance (if installed), NVIDIA Drivers - NVIDIA Display Driver only. Install NVIDIA Ver. 181.22 (use Aaron's link), & reboot, install NVIDIA Utility Package Ver. 6.03. In the NVIDIA Control Panel - 3D Settings - Set Multi GPU & PhysX - 'Enable' PhysX & Multi GPU Mode. Hopefully that fixes everything.

My iphone 5 sleep button doesnt work properly. Need help where can i get it fixed

I bought my i5 in january from croma, delhi and last 5-6 days i am noticing that my sleep button is not working properly on the right side. I searched for solution on the net but all i got to know that this is a problem in iphone 5 and need to be replaced. And i have no idea how to get it fixed or where to contact to get it replaced. Need urgent help.
Thanx in advance

modular747 wrote:
It means that for one year from the data of purchase, Apple will replace the phone with a refubished unit for any malfunction not due to abuse or physical damage (i.e dropping, exposure to water, etc,)
To be clear, it's a new or refurbished unit, whichever Apple has in the replacement phone stream.

.swf doesnt work properly

the movie includes about 40 scenes, and works properly, but
when i add another scene and place a 5min long movie clip on it,
most of the other scenes dont play, they stop at the first frame.
and no matter what i do with publish settings its always the same
story..what could i be doing wrong. could it be my computer..not
enough memory or something? i havent tried to export it on any
other computer.. help, please

When you say "40 scenes", just a quick question, have you
imported them directly on to the stage to play in the timeline or
imported your scenes dynamically using action script? If you have
imported your movie clips directly onto the stage, you might find
your pc may crash, especially, if you do not have a lot of memory.
believe it or not, a 5 minute movie clip can seem like a quite a
large in Flash. What also happens, your swf file needs to import
all your files before displaying them either onto your PC or on the
Web. If you do not have enough memory, it will take a long time to
play or ulimately crash. Try importing your movie clips
dynamically, using the NetConnection and NetStream in actionscript,
then all your swf file has only to import maybe your movie player
or the first movie, then whilst your user is viewing the rest of
your site, the other movies will not need to be viewed until your
user clicks on the available movie clip or link.

App_debitcard.2.0.0.tcl - long pound doesnt work properly

Hi friends!
I trying long pound in standart application example.
My incoming call from pots, then i enter pin code and destination number.
I type pound key at ACTIVE status fsm machine and starts disconnecting process. When outgoing leg is disconnected, command media play streaming _reenter_dest.au in incoming leg (see it in debug), but i listen silence instead prompt voice.
I can continue entering destination number again, make call and talks, but since long pound detected, i have no voice prompt listning.
i tried some ioses, c5400-js-mz.124-9.T7 till c5400-js-mz.124-22.T, some other 124 line ioses, no one where long pound works.
In 123 ios line same application works properly.
Thanks all!
DM

DM,
The script I'm using, it won't let the call pass through, unless my rate table has the exact number I'm dialing. The rate table has a column called pattern, this where all my int code including the area code are there, and yet I get to put the whole as is to make the call, eg 00114427846789, etc..
If you can help please, the thing I need to know, do we control that from the script, or is it the billing itself?
Regards,
Jassem
My dial-peers are perfectly ok.
dial-peer voice 8000 pots
description ***** INBOUND FOR 02... NUMBER *****
application byb-cc1
incoming called-number 92446889
dial-peer voice 9991 pots
description *** OUTBOUND 0011 INTERNATIONAL CALLS TO AAPT ***
huntstop
preference 1
destination-pattern 0011T
progress_ind setup enable 3
progress_ind alert enable 8
no digit-strip
port 0:D

Cooling Fan Not Working Properly

Hello,
i have an HP Pavilion g7 laptop and when i turn it on, it states the fan is not working correctly, then shuts down after 15 seconds or continues to windows if you press enter. I cleaned all the air vent with compressed air and still get same mesage when i power up. The computer seems to work fine otherwise, but sometimes the fan will run at rather a high speed all night even when it is supposed to be "asleep" with the cover closed. I have to make it hibernate to ensure that it does not run all night like that. Do I need to replace the fan and if so, how?
Thank you!
Rick

Yeah im having the same problem with the same laptop. Im kinda pissed about this because the first month i owned this laptop, that same fan broke and i had to send in into HP to be replaced. So now here we are again with the same part broken.
My friend also bought the same laptop at the same time as me and his fan also broke. So clearly this is a defective part. Not only that but they broke my keyboard during the fan replacement.
So HP are you actually going to do anything about this because i was just on your FB page and repeatedly got ignored by the chick TINA who runs the page or whatever.
So im not too happy at this point, so whats gonna be done about this HP?

HP pavilion dv6 fan not working

My HP PAVILIONDV6T-6100 laptop (Product no. LM720AV) is having problems with the cooling fan and overheating. I have started getting the cooling fan not functioning error at startup. When I use the laptop-the cooling fan runs almost all the time. It turns-off when I have only one application running on the laptop.
I understand that since the fan is running perfectly fine, the fan motor is still functional. Could it be dust accumulation that is causing the error and fan running continuously? Where can I get the insturctions for opening the cooling fan assembly and cleaning it? Also will I need to replace the thermal insulation after cleaning?
Thanks
Sunny

I paid $30,000 for my car but I trust the dealer to work on it because I know their mechanics do it every day. I could watch youtube videos and figure out how to do a tuneup but they will do it better. I will change my own air filter however since it is not too hard and will save money. Replacing a cooling fan is more like a tuneup than replacing an air filter. Still, you can do it if you follow the Manual and are careful. Here is the Manual:
Manual
This is the part number for your fan and heatsink:
641477-001
$63 from HP:
http://h20141.www2.hp.com/Hpparts/Search_Results.aspx?mscssid=11C544B95DEB4BC6A0D99C14917258C7&Searc...
$20 on eBay:
http://www.ebay.com/itm/New-OEM-HP-Pavilion-DV6-6000-DV7-6000-CPU-Fan-650797-001-641477-001-665309-0...
I would go ahead and run all the diagnostic tests you can access by tapping F2 and entering UEFI Diagnostics. Other than the fan what other problems are you having?
If this is "the Answer" please click "Accept as Solution" to help others find it.

I "upgraded" to FF4, now it doesnt work properly, wont open pages, will open blank tabs when i click on a link, tried to go back to the older one but that doesnt work now either, have tested it with Safari and it opens everything fine. Any ideas?

After upgrading to firefox 4 im now having a lot of problems using the browser.
if i try an open a link in a new tab it will just open up a blank tab, if i click on links or even type in the google search bar at the top it doesnt do anything, it just says "done" and the circle thing stops as if im on the page already, have tested it with Safari doing the same things and Safari works fine. I'd swap but all my bookmarks and passwords are in Firefox so id rather stay with that.
I tried going back to the older version of firefox (3.5 or something) but seems the bugs are here to stay now.......so.......any ideas? because its really annoying, shouldn't have "upgraded".
Is there a new patch coming out anytime soon or should i start getting used to Safari?
Thanks for your help.
Mark Lavery (Melbourne)

I would copy over the entire thing if you have room. With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account. While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases". If you have an iPhone, iPod and/or iPad...you can do the same thing from each device. Nice new feature...just remember that those ripped CDs need a back-up!!! Enjoy...

PAvilion dv6, fan not working correctly?

Was on my laptop, it shut down randomly, notification popped up saying fan was not working correctly. Is there a way to fix this? Or will it have to be sent away?

Try a can of compressed air in the reverse direction of the normal air flow. You may just have a massive amount of dust on the inside of the heatsink near the fan blades.
Here is a youtube video and about 15min in you can see the fan clearly:
http://www.youtube.com/watch?v=5VMqrudLhJA&feature=player_detailpage#t=1s
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

System fan not working properly

i have a hp 15 notebook 15-r004ne laptop and when i turn it on, it states the fan is not working correctly, then shuts down after 15 seconds or continues to windows if you press enter. I dont know what to do now please i need help .
Answers will be appriciated.
Thank You.

The fan may simply be clogged with dust, pet hair,etc. Pick up a can of compressed air and use it to blow out all vents really well.
If the problem continues try a hard reset.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Hp Pavilion dv4 Fan doesnt work properly

Similar Messages

Maybe you are looking for