HP Pavilion g6-1201tx Notebook PC video and audio driver for graphics card

i want HP Pavilion g6-1201tx Notebook PC video and audio driver for graphics card (Windows 7)

Hi:
Below is the link to the support and driver page for your notebook.
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&docname=c03061225&lc=en&product=5163244&quer...
Your model uses the AMD graphics driver only. Don't install the Intel one.

Similar Messages

Video and audio formats for iPad

Hey, guys.. I've tried searching this up in the forum but didn't have any luck with that..
I can't seem to upload my movies and songs into iPad... I tried converting my movie into .mov and .mp4. They can both be imported into my iTunes library but when I drag it to the iPad tab it says it cannot be copied because it cannot be played on the iPad. And some of my albums just can't be imported.
May I know the preferred format for my movies and my songs? And what could be the problem with my importing..
Thanks heaps.

Here are the spec for video and audio for the iPad:
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

When I switch between "normal" and fullscreen in a youtube video, the video and audio stops for a half second. Any solution?

It is only present in firefox. Did reinstall whole windows 7 also, still have the problem :(

Hello,
This could be related to the graphics card taking some time to display the flash video. Can you please check and confirm if you are seeing this issue when you use the HTML5 player of YouTube. To do that, you can do the following
#visit the [http://www.youtube.com/html5 HTML5 page of YouTube]
#Select the 'Request HTML5 Player' option
#Try viewing the video and see if the issue is happening
#You can switch back to the flash based player by revisiting the page and selecting 'Use the default player'
Please try that and let us know if the issue is recurring or not.
Thank you

Hp pavilion 15-n203sx notebook pc Bluetooth Peripheral Device‎ driver for win 7 64 bit

Hi , Kindly i have problem with Blutooth driver after i install the driver it's still gvin me on divace manger under the other device there is bluetooth Perpheral device driver not found this issue only came to me when i change the wind from wind 8 to wind 7 64 bit . Regards,

Hi, Please try: http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_104622_1&swEnvOid=4063 Regards.

Cutting and saving individual video and audio files from a clip

I have to cut 201 individual video and audio files for separate scenes from an 11-minute animated episode and save them as separate MP4 video and MP3 audio files. What is the most efficient way to do this?

Without knowing more about your project, it's hard to even guess at the most efficient workflow.
Like: Do these clips have audio or are you adding it? What format are these clips? What is the intended delivery for the 11 minute movie?
As a general matter, one creates an event, imports clips to it. Then organizes the clips according to the needs of job, using keyword collections and ratings. Then creates a project and starts a rough cut by marking ranges in the event browser and editing to the time line. Some people start with the music, making that the primary storyline mark where they want the edit to be and cut to that.
Upon finishing, one can choose one or more of the "destination" presets. It's possible to export Audio only or Video only or both. MP3 is one of the audio choices. Some of the presets are MP4. If you want possibly better quality and more control, export the files as master files and encode in Compressor.
Good luck.
Russ

Video and audio not in sync. Other answers here do not help.

My audio and video are not in sync in many streams but some are OK.
I do not have any extensions, add-ons and I am using the default theme. I have disabled hardware acceleration. I am now running in Safe Mode and the problem persists.
The video and audio sync for the first few minutes and then they work their way futhter and further apart, usually several seconds out of sync. I don't think this particular situation has been covered in the other posts.

You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

Pcastagentd video and audio settings

Dear List,
Since it took us some time to find this list (buried in the pcastagentd binary), here are the possible video and audio settings for the capture agent:
RecordingVideoCodec: H264, MPEG, DVNTSC, DVPAL, AppleAnimation, AppleComponent
RecordingVideoCodecQuality: Low, Medium, High, Lossless
RecordingAudioCodec: AAC, NONE
RecordingAudioSampleRate: 24, 32, 44, 48
I hope this saves others both time and energy.
Regards,
Jamie Hodge

Dear List,
Please note that there is also a "raw" NONE setting for the video recording codec. I have tested the various settings. All have "booted" save for the AppleComponent codec.
I hope this helps.
Jamie Hodge

HP Pavilion dv4155cl Notebook PC audio driver for win7

please help me to find the HP Pavilion dv4155cl Notebook PC audio driver for win7.....
thank you very much

Hi:
Try the XP driver. You will probably have to manually install it as follows...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-46934-1&cc=us&dlc=en&lc=en&...
Download and run the above file. Close out of any error windows.
Go to the device manager and click on the Multimedia Audio Controller needing drivers.
Click on the driver tab. Click on Update Driver. Select the Browse my computer for driver software option and then at the bottom of that window, select the Let me pick from a list of device drivers on my computer.
Click on Have Disk and browse to: C:\SWSetup\sp34210\SMAXWDM\W2K_XP\smwdmCH6 and select the SoundMAX Integrated Digital Audio from the list and see if the driver installs.
Then reboot.

Which video and audio codecs to use?

Hi everyone! I've just completed a photo montage for my wedding (200+ people) next week, and need to render/export it today as I'm flying off tomorrow (it's a destination wedding). The montage will probably be projected onto a wall/screen in the banquet hall.
I tried exporting it once with the 'default' settings offered to me by Adobe Media Encoder, and ended up with a 4GB+ file. I then tried exporting with a QuickTime format (H264 video and AAC audio), and while I ended up with a <200MB file, the audio was choppy every 10 seconds or so. Which is when I gave up and decided to come on here and ask you guys!
I'm not yet sure what media we're going to be using to play the montage, i.e. my personal laptop, my wife's Macbook, or the restaurant's own system, so I'd like to create several versions just in case --
1) .MOV (for Macs)
2) .AVI/.MPG (for Windows)
3) and a 3rd version to burn onto a DVD
My project's current settings are: 720x480 (I would like to stay at this resolution for the export), 29.97fps, 48kHz (16 bit). It's a 20-minute montage and I would like to resulting exported file size to be something manageable, perhaps <300MB at the most.
Based on the above, what video and audio codecs do you recommend I use for each export option? Please let me know if there is any other information you need. Thanks in advance!

One display/delivery possibilities would be a BD disc through Adobe Encore. That will be easily transportable, will play from any notebook with DVD/BD software player installed, and will be high quality. One can also play on almost any BD player, hooked up to a TV, or projector (HD capable).
I am also not a fan of any CODEC packs, and ONLY add CODEC's that are necessary. I will also try to go to the source even if it means buying the CODEC. Most "free" versions are hacked, or reverse-engineered, and often do not function nearly so well. The exception to "free" would be CODEC's, like the Lagarith Lossless, or UT, which are free.
With CODEC packs, what often happens is that one's good, commercial CODEC's are over-written by the hacked versions. Adobe does a good job of :"hiding" its CODEC's, but their priority can still be compromised, when the CODEC pack rewrites the Registry. Also, many will install all sorts of "stuff," and much of that is unneeded, and some totally unwanted.
Good luck,
Hunt

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008

New to iMovie, create live video and audio?

Hello, I am trying to create a video of a live musical performance to post on youtube and have figured out how to use the isight to get a video but can I use the biult in mics to record live audio with the video?

Hello, Nateomite
As Karsten says, you will certainly get better results and much more convenience with a camcorder.
However, if you decide to use your MacBook, the built-in mic can record audio with your video:
in iChat: iChat > Video > Record Chat records both video and audio.
in iMovie: http://docs.info.apple.com/article.html?path=iMovie/7.0/en/10172.html
tells you how to record using your MacBook's built-in iSight (and mic.)
Other movie/video recording apps may work differently, but most allow sound with video.
EZ Jim
Message was edited by: EZ Jim for other apps
G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

With newer MacBook Air, sending both video and audio to an LG TV works fine, but I want to send the audio to a sound bar attached to the TV. Any way to do this?

I am trying to get audio to play through the soundbar attached to the TV for great sound. Works fine with Apple TV, but on the MacBook Air, system preferences will only find the TV speakers. If I change the settings on the TV to external speakers (the soundbar), then I get no sound at all. The HDMI connection does what it is supposed to do, providing video and audio, but the audio can only go to the TV. I don't know if you can go backward and send only video through HDMI and then connect to the soundbar through the mini jack ports on the computer and the soundbar. Any solutions will be appreciated.

its important to do this in the correct order so the camera will be senced by the Mac and to prevent the Firewire connection from electrical damage:
power down your Mac
connect firewire from camera to Mac
power on camera and insert tape in camera and play back
power up Mac
start QuickTime
File > Preferences > record tab
video source - select the camera you have
sound source - select the camera you have
quality - select device native
the video should show in the QuicTime window
a green line below video will show presence of sound-it will play through the speakers if they are selected in system prefernces
rewind tape and playback
click on red button to start recording

Video and audio transmission from MacBook to TV

Since I really get mixed up with various posts about connecting MacBooks to a TV set I would love to get simple answers to the following questions:
How can I connect my MacBook to a TV so that I have video and audio rendering? My MacBook has a mini-DVi output, my TV set has VGA, HDMI, and audio inputs. Since to my knowledge HDI carries no audio signals I suspect that I need an extra audio connection. Is this true?

to rapanuii
depending on your macbook model you may need a "converter", meritline.com/mini-hdmi-to-cvbs-converter-adapter---p-83103.aspx?source=fghdac& gclid=CO7J9NSU67QCFWGnPAodRBsAAw similar to this. Use a mini DVI to HDMI apple adaptor. if you have RGB connectors on your tv you want http://www.monoprice.com/products/product.asp?seq=1&format=2&p_id=8125&CAWELAID= 1329456201&cagpspn=pla&gclid=CKW25beg67QCFaGPPAodRHAAfg

How can i stream video and audio from macbook air to my tv?

how can i stream video and audio from macbook air to my tv?

Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
Mini DisplayPort to HDMI® Adapter w/ Audio Support
If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires.

HP Pavilion g6-1201tx Notebook PC video and audio driver for graphics card

Similar Messages

Maybe you are looking for