HP Photo Smart D5110 not scanning with Mac OS 10.9

Help. I have searched everywhere and still cannot come up with a solution to scan from my Photosmart. Worked fine until I upgraded to Maverick. Thanks!
This question was solved.
View Solution.

Hello WelchS, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are looking into your scan options. I would like to try and help.
Due to the age of the printer, there is no HP software for this printer on Mavericks.  You can, however, utilize the Mac in-OS basic print and scan drivers.  I am including a document on Installing and Using the Printer on a Mac that should help resolve this, specifically the section of the document entitled "How do I scan with the driver from Apple Software Update?"
Please let me know if you have any questions.  Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

  • HP Office Jet J6480 All In One - will not scan with Mac OS 10.8 .3

    I have been unable to get my HP Office Jet J6480 All In One to scan after upgrading to 10.8.3.I have followed other posts and have installed the most up to date driver (http://support.apple.com/kb/DL907) but each time i try to scan from the HP device manager or the photosmart studio, it says "Sorry, scanner could not be intialized. (scanner not found)"  I have tried making sure there are no other updates by clicking on settings in the device manager and clicking check for updates but it tells me "server not availalbe - the software service is currently not available. please try again later" and i have gotten this error for the last week.
    I followed the second set of instructions found here: http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Software-Update-Server-Unavailable/td-p/18... to try to resolve that issue and have installed the software found at the link. I rebooted my computer and am still having the same problem.
    Note: My printer is wireless and i have not hooked it up via a cord. Will that make a difference?
    My printer seems to be printing fine.
    Thank you for any help you can provide.
    Sara
    This question was solved.
    View Solution.

    Try scanning from your Mac.  Use Image Capture app in your Applications folder.
    Click once on the scanner on the left side, then click on Show Details along the bottom.  Along the right side you will see LOTS of options for scanning and saving.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP L7780 not scanning with Mac OS X 10.9.3

    Upgraded MacBook operating system to OSX 10.9.3 and can no longer scan from HP L7780 All-in-One to computer? am I doing something wrong? or does this really not work anymore?

    Hello SBTubbs, welcome to the forums
    I saw your post about how you are unable to scan since upgrading to Mavericks. The Officejet L7780 does not have a driver available with Mavericks, which is why you are unable to use the printer software.
    However, there are workarounds that may work!
    See this link: How to Scan: OS X v10.9
    Have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Scanner not scanning with MAC OS X 10.9.4

    I cannot scan from my HP Photosmart All In One Scanner, Product #CN731A to my MAC OS X 10.9.4. I also use Safari. Please advise!
    Thank you

    I just learned how to do this with my HP Photosmart 3310 All-in-One from watching a video on the HP website.  I used Image Capture.
    Place the item that you want to scan on the scanner glass, or load it into the Automatic Document Feeder (ADF) if your printer has one.
    In the Applications folder or from the Dock, click Image Capture .
    Select your printer from the list. If your printer connects to a network, select it from the Shared list. The details of the scan display.
    Click Show Details to view scan settings and options.
    Change any settings as necessary, and then click Scan .

  • HP Scaner With Mac OS  X

    HP Office jet All in One 7410's Scaner does not work with Mac OS X.
    Printer is working fine.
    Any help?

    This worked for me..hope it helps.
    http://discussions.apple.com/thread.jspa?threadID=2133501&tstart=0
    Good luck,
    -Mike S

  • HP Envy 4500 will not scan to Mac

    HP Envy 4500 will not scan to MAC.  Printing works just fine but when I try to scan the printer says scanning but never completes the scan, there is no error message.  I tried uninstall and reinstall of the software, upgraded to Mac OS Yosemite and tried re-install again, no luck.

    Hi @eallen1219 
    From your description, it soudns like we may be haivng a osftware issue. Let's use the following steps to remove currenlty installed software, clean up the Mac, and reinstall the software again;
    Scrub/ Uninstall
    Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
    Click continue, click on one of the printers in the list.
    * Only do this step if you do not have any other HP Printers.  Hold down Control, Option and Command, While holding the three buttons down,
    Click uninstall.
    Reset Printing System
    Click the Apple icon (   ), and then click System Preferences.
    In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan  dialog box opens.
    Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Repair Disk Permissions
    On the Dock, click Applications, and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
    Click the Repair Disk Permissions button at the bottom of the window.
    Once the repair is complete, restart the computer.
    Restart the printer. Now you can download and install the printer software and install it. >  HP-ENVY-4500-series_v12.34.0.dmg
    When you add the printer, please ensure you are using the HP driver.
    Select Add other Printer or Scanner                                                       
    Select the printer you are adding and next to 'Use' you can the printer driver 
     Please let me know if you can scan now. Thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues.  I am not familiar with macs as this is my home computer used by other family members.  Any help on how to troubleshoot why such latency issues?

    I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues.  I am not familiar with macs as this is my home computer used by other family members.  Any help on how to troubleshoot why such latency issues?

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Itunes is not compatible with mac osx 10.5.8

    latest itunes not compatible with mac osx 10.5.8. How do I resolve this?

    You need Snow Leopard at least.
    MacBook upgrade possibilities - https://discussions.apple.com/message/19577869 - "The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard. The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion. The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion."
    Kappy 08/2012 post on upgrading to Snow Leopard, then Lion or Mountain Lion -  https://discussions.apple.com/message/19401628 - including how to get Snow Leopard and Lion since Apple removed them from the online store. 

  • Cisco Connect does not run with Mac OSX Mountain Lion (10.8.2)

    When I first installed Cisco Connect that came with my E1500 router, I was running Mac OSX Snow Leopard (10.7) and it worked fine.  I upgraded my OSX to Mountain Lion and now when I start Cisco Connect, I get:
    Unsupported operating system
    The router software supports these operating systems:
    - Mac OS X 10.5.8 or later
    - Mac OS X 10.6.1 or later
    - Mac OS X 10.7 or later
    I saw some other thread/info/download on Cisco Connect with Lion (10.7) but nothing for Moutain Lion (10.8) - is there a fix forthcoming?
    Thanks
    Gary

    All i want to do is disable the guest function through cisco. i live in an apartment and everyone logs into my guest account. i was at my neighbours and they were laughing saying they done need to subscribe for the internet cause they just log onto local wi fi. and mine is one of them. i dont know if that'll slow down my internet with so many people using it. but all i want to do is just avoid it all together and get rid of it. but in this case i am having the same problem as all of you. to disable the guest function you need to go through cisco connect and it is not compatible with mac osx mountain lion. grrrrrrr

  • Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?

    Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?

    You can download firefox 3.6.16 here: http://www.mozilla.com/en-US/firefox/all-older.html

  • In context not working with Mac Safari 6.04

    Hi there just noticed
    in context not working with Mac Safari 6.04, you can edit text, and save and publish but editable marquees are no longer visible especially the repeating elements?

    Hi Vicki,
    I would suggest submitting a support case on this for further investigation. 
    Unfortunately I'm on a PC machine so I cannot confirm on my end.  Please reach out to direct support ASAP if the issue is still existing. 
    - http://helpx.adobe.com/contact.html
    Kind regards,
    -Sidney

  • HT201317 why the last photos in photo stream are not sync with my iPad?

    why the last photos in photo stream are not sync with my iPad?

    Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
    Photostream only syncs when the camera app is closed, ensure it is closed.
    Photostream only syncs when the battery is above 20%, try recharging the device
    Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
    If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
    Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

  • HP C5380 DVD/CD Printing Feature Not Compatible With Mac

    I purchased this all-in-one specifically for the feature of printing direct to cd/dvds. Other functions work fine but this will not. After contacting HP Support I am informed that this feature is not compatible with Mac. Surely this is false advertising as nowhere on the packaging can I find any reference to this. Under specifications it shows that system requirements were Mac OSX 10.5.
    Has anyone else had this problem? Is there a fix? I have searched mac support but can find no reference to this. Interested to hear other viewpoints and experiences. 

    Hello,
    I would try printing directly on CD/DVD from the application HP Photosmart Studio.. Follow the steps below:
    1. Open HP Photosmart Studio
    2. Select an image from the Photosmart Studio library/browser
    3. Choose "Create" in the toolbar
    4. In the menu on the left, choose the following settings:
    - Project: CD/DVD Label
    - Label Type: CD/DVD (5 inch/120 mm)
    5. Move the image from the media bar to the label, resize it if necessary
    6. Click "Print" on the toolbar
    Regards,
    Vicarious 

  • Hello , i have the game fifa by ea sport but is not compatibile with mac.. where can i buy the version that can be used also on mac?

    Hello , i have the game fifa by ea sport but is not compatibile with mac. How can i make it work with mac?

    If you bought it for windows or an ios device it will not work on a mac. You need the Mac version

  • Lost ical and the ical 1.5.5 is not working with mac osx 10.5 ?

    lost ical, would like to download it, as in the installation disk, I'vent the possibility to do it . The problem is that the ical 1.5.5 is not working with mac osx 10.5 ?

    biomecasport,
    Welcome to Apple Discussions.
    1. Insert the Leopard Installation disk into the computer.
    2. The disk will appear on the desktop.
    3. Double click on the "Optional Installs" folder.
    4. Double click on the "Optional Installs.mpkg."
    5. Click on (Continue) in Introduction.
    6. Click on (Continue) in Software License Agreement.
    7. Click on (Agree) to agree to the terms of the software license agreement.
    8. Click on the disclosure arrow ▶ next to Applications.
    9. Select (✓) iCal.
    10. Click (Continue).
    11. After iCal has been reinstalled, download and install the Mac OS X 10.5.8 Combo Update to bring iCal up to the most recent version.

Maybe you are looking for