HP Photosmart 2610 all-in-one refuses to apply manual IP

My home network has a HP Photosmart 2610 all-in-one printer on it.  Occasionally all the computers on the network see the printer as offline (Vista and XP).  The printer must be deleted and then added again in control panel to make it work again.
This is happening because the printer IP is changing sometimes.
I am trying to assign a static IP by going to the printer server in a browser (192.168.1.101) in my case.
Then I click the "Networking" tab on the top, select "Wired (802.3)" on the left, select the "Manual IP" bullet, and enter "192.168.1.126" in the "Manual IP Address" field and "255.255.255.126" in the "Manual Subnet Mask" field.  When I click apply, the standard 'page loading' progress bar in the browser starts but never finishes  Opening a new browser and going to 192.168.1.101 confirms that the IP has not changed.  I tried this in multiple browsers (IE8, Chrome) and nothing would work.
I also tried "telnet 192.168.1.101" in a command window but I couldn't get it to connect. 
Thanks in advance,
Daniel
Message Edited by dshields on 07-25-2009 12:37 PM

Have you got a solution for this problem?  I am having a similar problem where it looks like the network card has failed.. Hopeing for an easy solution
Thank You
Jeff

Similar Messages

  • HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are a problem

    HP Photosmart 2610 All in One Printer   Paper feeds OK but the software and sensors are not allowing paper to feed until several steps are taken first.
    (I am using Windows 7.  I also use the virtual XP mode and mostly MS Office 2003 docs). 
    I have had this printer for several years and love it.  Before I toss it out, I thought I would check if I could get it to work properly before I buy another printer.  Note: I did put in a new HP black cartridge (because it was out of ink) but the printer was not working properly for several days before I changed the cartridge. The printer was at step 5 before ink change.
    Lately, each time I turn on my printer, I have to go through the same routine
    1. The printer wants to align the cartridges so I push OK
    2. The paper feeds into the printer and stops at the exact place to start printing.
    3. Error message appears that it is out of paper.  So I press OK to continue.
    4. It says "aligning print cartridges" runs through 2 sheets of blank paper without trying to do anything and then states "cartridge alignment failed"  "Press OK to continue"
    5. Screen is now normal and it appears it is going to work.
    6. It makes no difference if I used the copy function OR when I send a print job from the computer, the paper feeds into the printer and stops at the exact place to start printing but nothing happens.
    7. Error message appears that it is out of paper. OR that it is the wrong size paper.  I pull the paper that was at the proper place to be printed from the printer and then the error message says "Paper jam.  Press OK to continue"
    8.  I press OK.  The printer will then quickly feed in and eject 2 sheets of paper before it will actually start printing the print job.  It will work fine after this as long as I print from the same document.
    9. If I want to print a different document then I have to start all over again at step 6 to get the printer to work.  If I shut the printer off I have to go back to step 1.
    What I have already tried
    A.  Uninstalled and reinstalled the printer driver direct from HP web site.  I have done this several times with both the basic driver download and the complete package download.
    B.  I have done a partial reset by unplugging the printer, and then re-plugging the printer while pushing the  "# and 3" buttons while turning on the printer.  I have done this several times.  Each time it will work fine until I try a different document of turn off the printer.
    C. I have downloaded the HP Print and Scan Doctor and used it several times.  It states that "everything checks out OK"
    D. I have downloaded the HP Hardware Diagnostic Utility 4.0 but it does not work with my printer.
    E.  I have cleaned all the rollers and blown air throughout to make sure there were no bits of junk in the paper's path or blocking a sensor.
    F.  I have tried different brands and weights of paper (all 8½  x 11) but nothing works.
    Most of the problems started when I added the printer to the virtual machine so I could print XP files.  This may just be a coincidence because the printer has the same problems when I use the copy function without the computer being on.
    Thanks for looking at my issues.  Any help would certainly be appreciated.

    I just tried using Notepad as you suggested and had the same result.  Paper feeds in stops at proper place and error message "out of paper" 
    I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem. 
    I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner.  One for black and one for color.  The ink icons would change from completly full to just an outline as the amount of ink went down.  Currently the black ink icon is missing
    This is a very frustrating problem because the printer works great after doing a few steps to get around the problem.  The fact that the problem reoccurs any time anything is changed is the major problem
    Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs.  This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
    I want to thank you for all of your efforts.  Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer.  As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

  • Photosmart 2610 all-in-one Scan preview does not display

    Recovering from a hard-disk crash, I've just reinstalled my Photosmart 2610 all-in-one using the driver and software package for Windows XP : rub_W01_Americas_Euro1_NB.exe. downloaded from the HP support site. All seems to be running well, except for a glitch when I try to scan: the document Preview does not display.  I have made certain that the Preview checkbox is duly selected, but nothing seems to help. It is the same whether I'm scanning a picture or a document. It also makes no difference whether I launch the scan from HP Director or from within another application.
    Note that if I click Accept, the document (or picture) will indeed be scanned and saved. But I won't see it until I open it with some other application.
    Thoughts, anybody?
    Thanks!
    James

    Hello James, welcome to the forums
    I understand you are unable to see your scanned preview with your Photosmart 2610. I would suggest the guide below to use for troubleshooting steps for this issue.
    Scanning Stops at the Preview Screen when the Printer is Connected to the Computer with a USB Cable ...
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
    Have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • My HP photosmart 2610 all in one will print by not allow me to save or send a scan

    My HP Photosmart 2610 all in one will scan but will not allow me to save the scan or email the scan.  i assume it is a bug with maverick.....which i recently downloaded

    Does this thread help?
    http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/OS-X-10-9-Mavericks-Incor rect-output-using-HP-Scan/td-p/3069079

  • HP Photosmart 2610 All-in-One, Manual Two-Sided Printing, HP e-mail support Ticket no: 8028153835

    HP e-mail support, Ticket no: 8028153835 
    I purchased my HP Photosmart 2610 all-in-one printer in 2005. It was previously installed on a HP Laptop, Windows XP, and all the features worked.
    It is now on a PC running Windows Vista Ultimate 32. When I tried installing the printer software CD, it wouldn't load because of the Vista OS. I then loaded the HP Photosmart 2600 series full feature printer driver (Vista OS compatible) from the following HP website link:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-47754-1&lc=en&dlc=en&cc=us&...
    Now I cannot get the Printing Preferences to allow Manually Duplexing (two-sided) printing. This option was available on the original printer software.
    I've tried the solutions on: HP Image Zone Help / Two-Sided Prints which indicate:  Click the Finishing tab / In the Document options area / select the Print on both sides check box (this box is not available).
    When I run the printer from the Control Panel as Administrator, the printer Properties / Device Settings show Manual Duplexing: Enabled.  When I go to the printer Properties / Advanced / Printing Defaults, neither the Finishing / Print On Both Sides check box is available nor will the Printing Shortcuts tabs allow the Print On Both Sides option to appear (only shows Print On Both Sides: Off).
    HP e-mail support told me to install this patch to correct the problem:
    http://h10025.www1.hp.com/ewfrf/wc/genericSoftwareDownloadIndex?softwareitem=mp-69848-1&cc=us&lc=en&...
    When I try installing the patch, it won't load because it wants the original CD software. So I'm back to my initial problem of trying to load the original printer software that won't load because the CD is for Windows XP OS. I am at an impasse between the Software CD that I have, and what is available on the HP website.
    What is your solution?
    This question was solved.
    View Solution.

    cschmidt41 wrote:
    I use Windows 7 Home Premium 64 bit and the Deskjet 6500 is not one of the choices. Any subs?
    Also, if it were, do you download the driver?
    The driver is supplied through Windows Update.  Go to the Devices and Printers folder, Add a Printer, then select Windows Update.  It will take a few minutes to update the list, then the Deskjet 6500 series will be a choice under HP (not Hewlett-Packard).
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Error message on photosmart 2610 all in one

    when opening software my printer gets blue screen with error message 0x887dc92e .  please help cannot use software and shutting printer off  does not help.....any solutions
    This question was solved.
    View Solution.

    What is your operating system?  What software are you trying to open?  How is the printer connected?  What driver version?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Looking for HP Basic Driver only for hp 2610 all-in-one printer

    I have windows 7( Just recently installed) and a HP 2610 all-in-one printer.
    I just wanted to download the printer driver only and not the HP Photosmart and office software Suite.
    This webside say the printer driver only is availble as a separate download named "HP Deskjet Basic Driver"
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76831-1&lc=en&dlc=en&cc=us&...
    But I cannot locate the webside for the Basic driver only for Windows 7 OS. Can somebody locate the web address of "HP Deskjet Basic Driver" for me please.
    Regards
    Tech

    I just tried using Notepad as you suggested and had the same result.  Paper feeds in stops at proper place and error message "out of paper" 
    I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem. 
    I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner.  One for black and one for color.  The ink icons would change from completly full to just an outline as the amount of ink went down.  Currently the black ink icon is missing
    This is a very frustrating problem because the printer works great after doing a few steps to get around the problem.  The fact that the problem reoccurs any time anything is changed is the major problem
    Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs.  This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
    I want to thank you for all of your efforts.  Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer.  As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

  • HP Photosmart 2610xi all-in-one caught fire/start​ed smoking

    I have a HP Photosmart 2610xi all-in-one thats started smoking and appeared as if it had caught fire. I had recently moved it from on top of my counter to under it in a cabinent with my computer. I used the same cords, plugins, etc, i move it all the time and this wasn't anything major. When i plugged it back in as usual the screen flashed white and then turned off. I tried to press the on button but it wouldn't start. So I went to HP Support and found a troubleshooting video, which i followed. http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01321436&tmp_task=solveCategory&lc=en&dlc=en&cc​...
    As i was finishing step three, i plugged in the power cord into the usual outlet and then plugged the cord into the printer. The lights and Screen flashed rapidly and smoke started rising from the back. I immediatly unplugged the power cord from the printer and power outlet. What could have caused this, and what are my options. Ive loved this printer since i got it, and would prefer it repaired, unfortunetly its not showing up on the warrenty check so im assuming its out of warrenty, its pretty old. Thanks

    The Photosmart 2610 has been out of production for five years or so, I bought my last new one at closeout when I retired in 2005.  I do not have any information on repair costs.  The HP Partsurfer site says "Note: This product (Q5550A) is no longer supported by HP as of  Oct-10-2008, and service parts may not be available. The information below is for reference only."
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Photosmart Premium All in One Blue screen error B882B1C4

    I have recently purchased a Photosmart Premium All in One C309G machine which is connected via a USB cable to the PC. When I try to use it wirelessly it produces a blue screen with an error message B882B1C4 as soon as I switch on the BT hub. HP haven't been able to sort out the problem as I am now in  receipt of the 4th replacement . Can anyone suggest a solution please?  I have a BT1800HG wireless hub connected with an ethernet cable to my HP PC.

    This is posted in your separate thread:
    Hey there. I would try a power reset to fix the issue.
    Press the Power button ( ) to turn off the product.
    NOTE:The product might not turn off after pressing the Power button. Continue to the next step regardless.
    Disconnect the power cord from the back of the product.
    Disconnect the power cord from the electrical outlet, and then wait 30 seconds.
    Connect the power cord to the electrical outlet.
    Connect the power cord to the back of the product.
    Press the Power button ( ) to turn on the product.
    If this does not solve the issue then the printer will most likely need to be serviced.Hope this helps!
    -SeanS
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • HP Photosmart e-All-in-One - B110a : How can I deactivate wireless?

    Hi, everyone.
    I just bought HP Photosmart e-All-in-One - B110 and after the installation (which went OK), while trying to get acquainted with the printer and the rest of the functions, I pushed the Wireless button out of curiosity.
    Now, every time I switch on B110, the Wireless blue light keeps blinking. Does that mean that it's working?
    I do NOT want to activate wireless printing (at least for the time being). I want it deactivated permanently. Is there a way to do this?
    Many thanks in advance.
    This question was solved.
    View Solution.

    The blinking blue light means it's looking for a network to connect to. It won't connect to a network if you haven't put any info in the wireless setup. I believe there's an option to turn off the wireless radio in the settings somewhere.

  • Hp - photosmart e-all-in-one wireless printer cn731a- nothing prints??

    HP - Photosmart e-All-in-One Wireless Printer  (CN731A)
    Went through setup on Windows 7 64-bit, printed the test photo, came out great.  Thought everything was good to go.  Later, when trying to print a document, it wouldn't print.  Computer popped up a message saying "Successfully printed" but when I went to the printer, there was nothing there.  I tried running a wireless network test on the printer's screen, and once that page printed with the results, immediately after that, the document I was trying to get finally printed.  This was an early Christmas gift for my parents, & my mom just informed me that she tried to print again today, but nothing happened on the printer.  I am out of town now and am not able to troubleshoot on my own on the printer like I did a couple days ago so came here for advice.. Any idea what the issue might be? Did I maybe miss a step after doing the test print of the photo?  Any ideas would be appreciated!

    Hello,
    Try the below steps ..
    While the printer is ON, Unplug the power cord from back of the printer.
    Disconnect all the cables that are connected to the printer.
    Wait for 30 seconds.
    Plug in only the Power Cord. ( Printer would Power on ).
    Try making a standalone Color copy of a document . If it fails to print a copy, then it could either be an issue with the Ink cartridges  or the Printer .
    Regards,
    Jabzi
    Help the community by marking this post .
    Was your question answered? Mark it as an Accepted Solution!
    See a great post? Give it a Kudos!
    I work for HP
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • How do I direct my HP Photosmart e-ALL-IN-ONE D110 series printer to my Android Tablet?

    How do I add my HP Photosmart e-ALL-IN-ONE D110 series printer to my Android Tablet?

    Hi,
    Given your ptinter supports print from Android, you need an app called HP ePrint. Please use Google Store to install it:
       https://play.google.com/store/apps/details?id=com.hp.android.print
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Problem with installing Solution Center for a HP Photosmart Premium All-in-One Printer - C309g

    Hi folks,
    I've searched many threads and found some directions to remedy this, tried them and have had no luck.
    I'm running Windows 7.  All updates are current.  When I bought the printer I installed the software (on Windows 7 OS) from the disc and everything was fine.  Fast forward a year and Solution Center stopped working.
    Uninstalled all HP software to reinstall.  I was only able to reinstall HP Update.  I was able to load the basic drivers for print and scan, but not the entire software suite including Solution Center.  The installation stops abruptly after "installing updates".
    I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.
    What can I do with my printer (HP Photosmart Premium All-in-One Printer - C309g)???
    Thanks,
    Alex
    This question was solved.
    View Solution.

    Hi jerseyal,
    I hate to hear you are having issues.  What suggestions have you tried?  Did you get an error when installing?  How are you connecting the device?  Before completing the below steps run the print and scan doctor to see what it indicates and if the issue is resolvable through that tool(click + beside utility diagnostic tools, then download beside print and scan doctor). Click Here
    If you are still experiencing the issue the steps below may help resolve it. 
    Try using the scrubber built into the software, then reinstalling from the current download available on the website. 
    From original printer installation CD:
    1. Insert CD into drive, and then cancel the installer
    2. Open My Computer, and then right click on the CD drive and chose open
    3. Open folder Util
    4. Open folder CCC
    5. Run the uninstall_ L4.bat for non-HP computers only.    For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused
    6. When the uninstall has completed restart the computer
    7. Run Disk cleanup from Accessories\ System Tools
    8. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    9. Use the following tool to clean the registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damages or loss of data caused by the utility.  This step is optional.   You can skip it if you want.
    http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
    10. Download the full feature software and drivers Driver Link
    11. Run the download to reinstall the printer
    From a download:
    1. Run disk cleanup on your computer
    2. Download and run the software and drivers below.
    3. Once the download is done extracting, cancel the download. Driver Link
    4.. Press the Windows key + R on the keyboard to bring up the run menu.
    5. Type %temp% in the run field and click OK.
    6. Look for, and open the folder starting with 7z (Example: 7zS2356)
    7. Open folder Util
    8. Open folder CCC
    9. Run the uninstall_ L4.bat for non-HP computers only.    For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused.
    10. When the uninstall has completed restart the computer
    11. Run Disk cleanup from Accessories\ System Tools
    12. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    13. Use the following tool to clean the system and registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damages or loss of data caused by the utility.  This step is optional.   You can skip it if you want.
    http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
    14. Download the full feature software and drivers Driver link
    15. Run the download to reinstall the printer
    Note: Depending on type of security software it may need to be disabled when re-installing unit. Also make sure the Adobe flash player is up to date.
    Hope this helps!
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    I work for HP.

  • Since I installed Mountain Lion operating system, I cannot print.  I have a HP Photosmart C7280 All-in-one printer.  I get a message when I try to update the software "Server not available  The software update service is currently not available."

    After installing Mountain Lion, my printer doesn't work.  I know it is connected as it shows up,  The message is:
    "The printer software was installed incorrectly.  Please reinstall the software for this printer or conact the anufacturer for assistance."
    I used the disk that came with the printer as when I go to the HP site, it tells me that Apple has the drivers needed.  I unistalled the printer and reistalled.  Previously, I just went to the HP website an everything worked fine for drivers, program, etc.  I never had to use the CD that came with the printer.  My printer is:  HP Photosmart C7280 All-in-one, it is wireless, but I even took the computer and plugged it into the printer to make sure that everything was connected.  Can someone please help me to get this working,
    Thank you,
    Cheryl Paul

    Here:
    http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US

  • HP Photosmart C7280 All-in-one problem printing. Ink System Failure has failed unable to copy--

    I'm having a problem printing on my HP Photosmart C7280 All-In-One. The following message is what came up on the printer screen: Ink System Failure has failed unable to copy, receive faxes or print. Refer to printer documentation Error O.cl9a0007.
    Does anyone have any suggestions?
    This question was solved.
    View Solution.

    Hey Spider! First off welcome to the forum.
    I would recommend removing all the ink cartridges, unplugging the USB cable from the computer that connects to the printer, and then shutting the printer off completely by removing the power cord. Then restart your computer. Turn the printer back on but leave it disconnected from the computer. After it has finished its power on cycle go ahead and insert the ink cartridges back into the printer and be sure to seat them properly.
    After you have all the cartridges back in the printer properly then connect it to the computer. See if this resolves the issue. If not post back with any findings.
    Thanks,
    SeanS
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Maybe you are looking for

  • EAX in ga

    Greetings, I've installed Vista RC and the Audigy 2 ZS Beta Drivers (2.0). I got those annoying popups the first boot only. After that, sound does work, but I don't see any EAX sound options in "EverQuest II" and when I do see them (like in "Civiliza

  • BootCamp 2.1 Success/Failure

    Hello everyone. There are now several threads on this topic. I have read over most of them and i think i may have found a link between the failures. However, proving this will require your help. Although the update just released is 2.1, most people w

  • How go generate Popularity Trends report for a custom list in SharePoint 2013

    Hi,  I want to generate  Popularity Trends report for a custom list in SharePoint 2013, is it possible? Thanks khadar pasha

  • Installing CS 5

    My office has two licenses for Adobe Web Premium CS 5. I am trying to retrieve an unused license and installation. It has been a year since the software was installed on one computer. Thanks for any help. Georgette L. Keeler [private data removed]

  • Mat**bleep**a DVD Ram UJ8D1

    I am having serious problems with my DVD RAM I'm at the verge of cracking, because I can't find help at any of our local Computer shops. What must I do to fix this? I've tried every website, every hint, everything. In the troubleshooter panel it tell