HP Photosmart 7520 e-all-in-one Series, Product # CZ045A Printer Windows 7 64 bit

I have been setting up my new wireless printer for a couple of days.  My printer is connected wirelessly to a network and 
printing well. 
I have been trying to set up my web services to e-print and am having some problems.  I have a long printer e-mail
address which is hard to remember.  After putting in a password, I forgot it and am having trouble retrieveing it.
After following instructions to reset a password, it is not coming to my e-mail.  My printer shows that I am connected to web services and that eprint is on.  I just cannot register to e-print on my computer.   I am not sure if this is a printer problem or a computer problem.
I am wondering if I should disable web services and start over again and will I be issued another printer e-mail address
or Can I change the printer e-mail address?
Any suggestions would be helpful.
Thank you.
sjco 

Hi Sjco,
I understand you are having trouble setting up ePrint.  Have you created an ePrint account?  What error message do you get when you try to create an ePrint account?  

Similar Messages

  • I have an HP PHOTOSMART 7520 e-ALL-IN-ONE SERIES printer purchased approx. 5 months ago.

    Where can I get instructions as to how to use my printer for photos.  There is a small tray and I have inserted the oorrect paper.  I attempted to print a photo on a letter size sheet - and I indicated the size - it came out only as half a photo.  So I tried to print it using the small sheets and it printed it small but on one of my regular letter size sheets.  And the colour is coming out orange . . . HELP . . . I need instructions.  Thank you!
    This question was solved.
    View Solution.

    Hey maryjane41,
    I see you are looking for information about printing photos with your Photosmart 7520.  Please see the document linked below on loading special media types in this printer.
    Loading Plain Paper, Photo Paper, and Envelopes
    As well, take a look at the "Print" section of the User Guide linked below.
    http://h10032.www1.hp.com/ctg/Manual/c03456524.pdf
    Hope this helps,
    Jason
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • HP Photosmart 7520 e-All-in-One Printer

    My HP Photosmart 7520 e-All-in-One Printer cuts off the last 1/2 inch when printing. I tried a hard start but that didn`t work. i`m thinking it has something to do with the heads.

    Look to your software.My hp has an "advanced" options after you hit printer preferences.  the advanced way down bottom of sceen.  Then half-way down something about print with borders - Change it to print boderless. If that not help chaNGE pAPER-SIZE IN  FIRST SCREEN.  fROM 0.5 INCH TRY 0.15. Recall all desktop printers must have space for the mechanical grips to grap the blank paper and pull it into the rollers.  Big expensive desk-size use a vacuum to "pull" paper. If and when you printer no pull paper, pull the rear "duplexer" and clean rollers.  May not be reccommended.  I used cloth towel with 90% rubbibg alcohol  - $!.00 in most drug stores.  Kleenex and such may leave "lint".  Worked for me. Good luck

  • PhotoSmart 6510 e All-IN-ONE Series HP Printer

    My HP Photosmart 6510 e-All- In -One printer suddenly stoped coping, and delivers blank pages.  When I print from my laptop the printer works but the quality is poor; printing faded out areas within the printed-out paper process.  I tries cleaning the Pringheads, but got no resolve to my issue.  Can anyone give advice on eliminating my problem?  

    When you replaced the printer cartridges did it clear up the problem?
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Photosmart 6510 e-ALL-IN-ONE Series offline

    I can't get my 6510 all in one to go back on-line.  I have windows 7 on my hp laptop and use my android phone as my wireless connection - this has worked perfectly for the past two years.  I ran a wireless network test and the printer indicates PASS on connected.  I've shut my printer off and turned back on.  I did scan some pictures last weekend so I'm wondering if that has changed something.  Any help is greatly appreciated.

    Hi Williamstw
    I understand you are unable to get the Photosmart 6510 back on line.
    I have provided a document for the printer being offline to take a look at.
    Hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Photosmart 7520 e-All-in-One Embedded Web Server (EWS) Does Not Respond

    My new (as of 3/14/2014) 7520 is connected (wirelessly) to an all-Apple wireless network. with four computers (and, at times, two iPhones) sharing that network.  
    While I can print to the 7520 and also scan from it, I cannot access the 7520's Embedded Web Server, no matter what I try. 
    I have located the 7520's IP address on its display and entered it into the Safari web browser's address field as 192.168.1.7 (with the usual http colon slash slash prefix, of course).    When I hit return, the browser's progress bar appears and then stalls.  After 30 seconds, the progress bar disappears and nothing else happens.  
    While trying to find what might be causing this problem, I have also…
    • disabled the network's (and my computers') firewalls, 
    • used the 7520's Bonjour address, 
    • tried both addresses using Safari on …
         - a MacBook running OSX 10.6 (Snow Leopard), 
         - a MacBook Pro running OSX 10.7 (Lion), 
         - a MacBook Pro running OSX 10.8 (Mountain Lion), 
         - a Mac mini running OSX 10.9 (Mavericks), and 
         - an iPhone 4 running iOS 7.1
         - an iPhone 5 running iOS 7.1
    • made sure I was using the latest version of the printer driver software and HP Utility, and 
    • used the HP Utility to attempt to access EWS, 
    …all without success -- that is, on the laptops, nothing is displayed.  On the iPhones, Safari reports that it "could not open the page because the server stopped responding."  
    Furthermore, although I can turn on and connect to the 7520's Direct Wireless wi-fi channel with my laptops and iPhones, typing the address for the EWS (specified in the printed Network report as http://192/168.223.1) in the browser and pressing Enter again yields the same result.  
    I had all these problems with a 7520 I bought from a local computer store.  I contacted HP Tech support by chat, spent 4 hours walking through resets and other tests with them, and they decided to send me a new 7520.  I have sent back the first 7520, installed the new one, and the problems persist with the replacement 7520!  
    What do you think might be wrong here?  Do you have any advise or trouble-shooting guidance?  

    Okay… I did as you advised — as best as I could, that is… the link you posted yielded a page marked "HP was unable to find the page you wanted."
    In any case, I changed the DHCP range to 192.168.1.100 thru 150.
    Using the following procedure, I believe I set the 7520 to the static address 192.168.1.10 (using the 7520's control panel, from the home screen)…
      • Tapped the radio (wireless) icon, second from the left on the top bar of the screen.
      • Tapped "Settings" button, lower-left screen.
      • Tapped "Advanced Settings" bar (second fom bottom).
      • Tapped "IP Address" bar (at top).
      • Entered "192.168.001.010" in the IP address field.  
      • Pressed the home button icon to the upper left of the display.
      • Tapped the wireless icon in the top bar again and confirmed that the IP address had been changed to … .10
    With that done, I tried 
         http://192.168.1.10/
    in the browser of a couple of my computers (OS X Lion MacBook Pro, OS X Mountain Lion MacBook Pro).  
    Still no joy.  
    In case you don't alread know, Airport base stations can be set to reserve specific IP addresses for static IP devices or services.  I reserve an IP address for testing database and OS X servers on my network (for clients).  You can reserve as many such IP addresses as you like in the "Network" tab of a base station (using Airport Utility) as shown here…  
    Based on your advice, I have reserved the … .10 address, as you can see.  Hope this is useful to you.

  • HP Photosmart 6510 e-All in One Series I want it to print off my PC in just Black and not Colour?

    Please help! I have been in to settings for the printer on my Lap-top and can not find anywhere that will allow me to adjust to just printing in Black and White when I need it and not Colour all the time, which it is doing!

    Hi @Anna11,
    Welcome to the HP Forums!
    I understand that you are trying to print in black only instead of color with your HP Photosmart 6510. I am happy to help with changing these settings!
    For further assistance, I will need to know some more information:
    If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
    If the full feature software and drivers has been installed.
    Please see this post, Want Good Answers? Ask Good Questions, by @Bob_Headrick, so you can get the most out of these forums.  
    Thank you for posting, and I hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Black ink cartridge will not work even though new; photosmart 5520 e-all-in-one series

    My printer suddenly stopped printing properly.  The black ink is no longer printing.  I changed the cartridge, thinking it might be defective.  I have cleaned the printheads several time, reset the cartridges etc.  and the ink still does not come out in the print quality diagnostic nor in documents that I need to print.  The printer is 2 years old.  Is there any other things  I could do to get it to work, before I go and buy a new printer????
    Any suggestions would be appreciated.

    Hi L_C54,
    Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5514, you are unable to print in black ink after replacing the cartridge.
    I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
    Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
    If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in?
    I hope to hear from you soon.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP Photosmart C6300 All in one series is not printing

    I have replaced all cartridges, and gone through the troubleshooting program for Ink System Failure with no success.
    I have the HP Photosmart 6300 printer. I need your help.
    Loreen Brigham

    Hello Loreen,
    Can you try printing a testpage by pressing Setup»Tools»Printer Status Report. Please scan this page and add it to your post by clicking the insert/edit picture button, so that i can have a look at it.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • Cartridge problems HP Photosmart 7520 e-All-in-One Printer

    I have replaced all of my ink cartridges with genuine HP cartridges.  I keep getting an error message that says that one or more of my cartridges are either damaged or missing.  I also cleaned all of my printer heads.   Amy suggestions? 

    Hi DF5, Does the error message indicate a particular cartridge as having the problem? Did you get the error message as soon as you replaced your cartridges? If there is a particular cartridge that is causing the error try replacing it with your old cartridge if you still have it. This will indicate if the problem is solely with the cartridge. If the old cartridge works check the metal contact area on the back of your cartridge for dirt or damage (2 below). Also check the corresponding electrical contacts inside the printer (indicated by the blue arrow). If you notice any damage to the contact I would suggest that you contact HP Support for assitance.  Please let me know if any of these steps help resolve your issue. Many Thanks,Francheska  

  • How do I connect my IPad 3 to the HP Photosmart 5510 e-all-in-one series printer

    can you tell me how to connect my HP Photosmart printer to my iPad 3 (printer is the 5510) I have successfully connected it to my MacBook Pro

    Be sure your HP 5510 is connected with your Wi-Fi network en on.
    Then be sure your iPad is connected with the same Wi-Fi network.
    Then you can print with your iPad.
    Here you can find more info; http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&tmp_geoLoc=true&d ocname=c02623193&jumpid=re_r11400/en/hho/ipg/easy_wireless/whats_hot/

  • Photosmart 7510 e all in one series Printer failure Oxc19a0023

    After having been turned off for several months, I plugged in my 7510e and the following message came on the screen.
    Printer failure, Oxc19a0023, Please turn printer off then on. I did this with no change. I unplugged both electric plus and USB and reconnected. I removed the cartridges and replaced but the same message keeps coming and I cannot get passed this message. If anyone has had this problem and has been able to fix this or if anyone know how to fix this I would really appreciate some help. Thank you.

    Hello @TSLI76 , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are experiencing 0x errors.  I would like to help!
    I would recommend removing the ink cartridges, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend this document on An 'Ink System Failure' or a '0x ...' Error Message Displays on the HP Printer Control Panel.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Photosmart 7520 e-ALL-IN-ONE appears to send email from scan successfully but does not

    The scanner scans and appears to send the email successfully, actually confirms the email has been sent but does not arrive 
    This question was solved.
    View Solution.

    Hi Anne,
    Thank you for the update.  It’s great that we solved one issue, now onto the next ...
    Please Try the HP Print and Scan Doctor for Windows.  The Print and Scan Doctor diagnoses and helps resolve common printing, scanning, and connectivity problems.  It should resolve the problem, or at least point you in the right direction to solve the issue of the missing text.  If it doesn’t, please try following the steps in Troubleshooting Print Quality Issues.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • How do I get my printer hp Photosmart 6520-e all in one series to enlarge the text?

    Apple ipad
    This question was solved.
    View Solution.

    I just looked into both that app and into AirPrint (to see if that was a viable work-around), but it does not appear to be the case that you will be able to alter the size that text prints. It is directly conveying the information from the location you are viewing it from to the printer. When you enlarge the text on the phone, the text itself is not any larger, you are essentially zooming into the page. Leaving the base sizes of everything unchanged. 
    Much like looking through binoculars to see the moon. The moon itself is not larger, but with that aide you are better able to see it. 
    Let me know if this information is helpful! 
    -Spencer 

  • Black ink cartridge will not work even though new; photosmart 5510 d-all-in-one series

    My printer has suddenly stopped printing properly.  The black ink is no longer printing.  I have tried 2 new cartridges and cleaned the printheads.  Th  black does not come out in the print quality diagnostic nor in any documents that I need to print.  The printer is 2 years old.  Is there anything  I can do to get it to work?

    HI,
    Please follow this document for the issue
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03425035&cc=us&dlc=en&lang=en&lc=en&product=506...
    Hope this helps
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Maybe you are looking for

  • Is there a way to use REST service to query data from a forms collection?

    I want to query and retrieve data from a SharePoint forms collection. I have a forms library that has multiple documents all being created using the same template. I need to query and retrieve data from it using oData/ReST API. I could see the /_vti_

  • My photos will not sync, "required file not found"

    I already deleted the iPod Photo Cache (twice) and this did not fix my problem!

  • Delete Text and images in a pdf.

    I want to search and then delete all occurances of some text and specific images in a pdf

  • How to uninstall a program

    I dowloaded a screenshot free app and I didnt care for it...and now I cant get rid of it...I clicked on Menue and selected delete and deleted the icon but in menue it's still there. is there some other way to delete apps that I dont know about?

  • Error handling for Direct binding

    Hi Anybody handled Direct binding exceptions. I have a requirement if the direct binding service is down I have to catch it and do some action. when I have catch or catchAll not catching it. I am getting rollback fault so my bpel waits continuously i