HP Photosmart C6150 All-in-One Printer/Scanner - Blank, black photo edit window

When I now scan a photo I wind up with a blank black screen in the window where I would normally be able to edit the photo.

Hi functionless,
Welcome to the HP forums!
I'm sorry to hear you haven't been able to edit your photos on your Photosmart C6150 recently but I will absolutely do my best to lend a hand to help out
Would I be safe to assume the printer's screen only goes completely black when trying to edit a photo? If you try anything else on the printer (say a copy, a test page, or navigating the Setup menu) do you get the same screen at any time?
Is the printer plugged directly to a wall outlet? If not, please move it to one.
Do you have to unplug the printer, or turn it off, to get it back to a regular screen?
Did you notice any changes or anything prior to this happening?
Once I hear back from you I will certainly offer some suggestions for you to try
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Similar Messages

  • I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

    I have an HP Photosmart C4180 all-in-one, printer, scanner and copier.  I can't figure out how to scan more than one page?  It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement.  Any ideas??
    Thank you, Jetteski

    Hello Jetteski,
    Hello Jetteski, Thanks for the post.
    Since you are running a MAC, check the below links for some excellent information on scanning.  Good Luck!
    http://goo.gl/M8Cl2
    http://goo.gl/cufK6
    http://goo.gl/OTQoR
    I work for HP but my posts and replies are my own....Thank you!

  • HP Photosmart C3180 All-in-One printer -- SCANNER not working.

    I have had this HP Photosmart C3180 All-in-One printer for a couple years and all is well. HOWEVER, the one function not working properly is SCANNING. I can print fine and copy fine. But when I go to scan something my power button flashes for about 10 seconds and then stops. Nothing happens, and nothing scans. HP said it was not the printer itself, but something to do with my operating system through Apple. I have the current 10.5.6 version of Leopard.
    If I can get any help from others I'd appreciate it!

    HP provided this link to software which resolved my scanning issue.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-55009-3 &lc=en&dlc=en&cc=us&lang=en&os=219&product=1146331

  • My printer wont turn off or respond -- HP Photosmart C4280 All-in-One Printer - Scanner - Copier

    My printer quit working and stays on all the time. I cant shut it off and the on light keeps blinking.

    Hello sgusta ,
    Please perform the below mentioned step.
     Make sure the printer is ON.
     Unplug the Printer Power cable .
     Unplug the USB cable from back of the printer in case you have the printer connected with USB.
     Wait for 30 - 40 seconds.
     Plug in the Printer Power cable.
    The issue should be resolved by performing the above steps.
    If the issue still exits, then do call the HP Tech Support (US) 1-800-474-6836
    Regards  ,
    Jabzi
    Help the community by marking this post .
    Was your question answered? Mark it as an Accepted Solution!
    See a great post? Give it a Kudos!
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • HP Photosmart C4480 All in One Printer Scanner Copier

    I am scanning scrapbook pages with a white background. However, my scanner picks up reds and/or pinks and tints the white parts of the page, so I am not getting a true color. Is there a way to adjust?

    Hi JavaJoan,
    Let me please take a moment to say "Welcome" to the HP Forums. I see that this is your first visit with us.  I hope you enjoy your experience!
    To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having some issues with  lines on your copies. 
    This could possibly be a power issue. Please make sure you have the printer power cable connected to a wall outlet and not a power bar/strip.  Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general.  Please click on the link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I also suggest that you try the document that deals with Vertical Bands, Lines, or Streaks in Copies or Scans.
    Please write me back if you are still having issues. If I don't hear back from you today, I hope you have a Fantastic Tuesday.
    Cheers,   
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP Potosmart c6380 All in One printer -scanner - copier

    Hi just been give a HP Potosmart C6380 All in One Printer - Scanner - Copier  , i have no information pack with it. How can i get hold of one to able to connect the printer at home.

    Hello lou, What is the operating system on the computer you want to install the printer on? Depending on the OS, you would download the Full Featured Software for that OS.Then making sure you have your USB cord ready to connect the two together, install the software and follow the instructions as it installs. Connect the USB cord when it tells you to. Here is the support page for that printer. It gives the download options and manuals you would want.HP Photosmart C6380 All-in-One Printer Manuals | HP® Support IF you need further help, let me know.Thanks.

  • Problem with installing Solution Center for a HP Photosmart Premium All-in-One Printer - C309g

    Hi folks,
    I've searched many threads and found some directions to remedy this, tried them and have had no luck.
    I'm running Windows 7.  All updates are current.  When I bought the printer I installed the software (on Windows 7 OS) from the disc and everything was fine.  Fast forward a year and Solution Center stopped working.
    Uninstalled all HP software to reinstall.  I was only able to reinstall HP Update.  I was able to load the basic drivers for print and scan, but not the entire software suite including Solution Center.  The installation stops abruptly after "installing updates".
    I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.
    What can I do with my printer (HP Photosmart Premium All-in-One Printer - C309g)???
    Thanks,
    Alex
    This question was solved.
    View Solution.

    Hi jerseyal,
    I hate to hear you are having issues.  What suggestions have you tried?  Did you get an error when installing?  How are you connecting the device?  Before completing the below steps run the print and scan doctor to see what it indicates and if the issue is resolvable through that tool(click + beside utility diagnostic tools, then download beside print and scan doctor). Click Here
    If you are still experiencing the issue the steps below may help resolve it. 
    Try using the scrubber built into the software, then reinstalling from the current download available on the website. 
    From original printer installation CD:
    1. Insert CD into drive, and then cancel the installer
    2. Open My Computer, and then right click on the CD drive and chose open
    3. Open folder Util
    4. Open folder CCC
    5. Run the uninstall_ L4.bat for non-HP computers only.    For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused
    6. When the uninstall has completed restart the computer
    7. Run Disk cleanup from Accessories\ System Tools
    8. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    9. Use the following tool to clean the registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damages or loss of data caused by the utility.  This step is optional.   You can skip it if you want.
    http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
    10. Download the full feature software and drivers Driver Link
    11. Run the download to reinstall the printer
    From a download:
    1. Run disk cleanup on your computer
    2. Download and run the software and drivers below.
    3. Once the download is done extracting, cancel the download. Driver Link
    4.. Press the Windows key + R on the keyboard to bring up the run menu.
    5. Type %temp% in the run field and click OK.
    6. Look for, and open the folder starting with 7z (Example: 7zS2356)
    7. Open folder Util
    8. Open folder CCC
    9. Run the uninstall_ L4.bat for non-HP computers only.    For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused.
    10. When the uninstall has completed restart the computer
    11. Run Disk cleanup from Accessories\ System Tools
    12. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    13. Use the following tool to clean the system and registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damages or loss of data caused by the utility.  This step is optional.   You can skip it if you want.
    http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
    14. Download the full feature software and drivers Driver link
    15. Run the download to reinstall the printer
    Note: Depending on type of security software it may need to be disabled when re-installing unit. Also make sure the Adobe flash player is up to date.
    Hope this helps!
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    I work for HP.

  • I have a HP Photosmart C7280 All-in-One Printer and want to print from my ipad

    I have a HP Photosmart C7280 All-in-One Printer and want to print from my ipad's and my iphones at home...  My printer is set up to print wirlessly on my Network.  I need to know is there a firm wear update i can get or a good app to install so i can print?? 

    hi there, 
    This article should have everything you need to get started . Check it out and let us know if it helps.
    Best of Luck! 
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Purchased an HP Photosmart 5520 all in one printer last year and a Macbook Pro in Jan. They worked together up to June. In Sept. when I tried to print wirelessly, it would not print. The laptop had been updated. Tried to update the printer via HP,couldn't

    I have an HP Photosmart 5520 all in one printer and a MacBook Pro. Bought the MacBook Pro in Jan 2013 and the printer in Dec 2012. I was able to print to the wireless printer up until June 2013. In September, when I tried to use them together, I could not print. During the period between June and Sept., my laptop software was updated. I have tried to update the HP software on my laptop, but could not. What can I do to use this printer with my MacBook Pro? Please help!

    The MacBook Pro is running at least 10.7.

  • Looking for Print Server for HP Photosmart C4483 All-in-One Printer

    I am looking for Print Servers that I can use with 'HP Photosmart C4483 All-in-One Printer' for both 'Printing and Scanning'. I'm not sure if this Printer is Network Ready or Network Capable, kindly advice.

    Hello Merole
    As I understand it you can print color everywhere but from MS Word 2013? If this is the case try the steps I have outlined below to see if they resolve your issue:
    On the View tab, in the Color/Grayscale group, click Black and White.
    On the Black and White tab, in the Change Selected Object group, click the settings that you want.
    I hope this helps resolve your printing issue. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Infor regarding HP Photosmart Premium All-in-One Printer - C309g

    HI i have a question.
    I intend to buy HP Photosmart Premium All-in-One Printer - C309g for my home use.
    I want to know whether i need a wireless connection forthis printer or i can use with without a wireless connection.
    I have a PC with DSL but with no wireless connection.
    Umer

    The C309g has an Ethernet port so you can wire it to your DSL router/modem (if there are ports open in the back).
    Read more here.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • "ink system failure" error with code oxc19e0023 on a HP Photosmart Premium All-in-One Printer - C309

    "ink system failure" error with code oxc19e0023 on have a HP Photosmart Premium All-in-One Printer - C309g  - Have done all the resets and reseated the ink also tried replacing ink with new HP carts..getting frustrated please help
    This question was solved.
    View Solution.

    Have you tried the steps outlined in this article:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
    If not give the steps a try and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • HP Photosmart Premium All-in-One Printer - C309g dose it support eprinting

    dose 
    HP Photosmart Premium All-in-One Printer - C309g support eprinting and airprinter
    This question was solved.
    View Solution.

    Hello RetiredHP,
    Thanks for the post.  Ok, we may have several options here.  With ePrint, you can use the mobile app. to print from your printer from any location with your iPad or iPhone.  If you have downloaded and installed the app., then check the below.  If the ePrint app. is not showing (should look like icon below), check the link below these steps.  The 2nd link provides some additional information.  The key is to ensure that both your iPad and the printer are on the same network.  Good Luck!
    Figure 3: HP ePrint mobile app icon
    If prompted, provide your iTunes account information, and then click Get. iTunes automatically installs the app on your mobile device.
    Step two: Activate the mobile app (optional)
    Why should I activate the mobile app?
    If you activate, you unlock all the features of the HP ePrint mobile app. You can print to any HP ePrint-enabled printer (to which you have been given access) from anywhere your mobile device has Internet access. You can also print Microsoft Office documents and Web pages, or save the Web pages to print later. HP ePrint mobile app even helps you with HP printer setup and lets you monitor the status of your print jobs.
    If you do not activate, you can still print directly to your supported Wi-Fi-enabled HP printer, but only when your mobile device is connected to the same Wi-Fi network. You can print photos, images, PDFs, and text files saved on your mobile device.
    Use the following steps to activate the mobile app.
    On your Apple device, tap the HP ePrinticon, and then tap Activate.
    Type your email address in the Activate using your emailbox, and then tapActivate. The HP ePrint service sends you an email containing an Activation Code.
    Check your email, and then write down the Activation Code sent by the HP ePrint service.
    On the Apple device, press the Home button ( ) twice, and then tap HP ePrint.
    Type the Activation Code into the box, and then tap Activate.
    The app displays a message to confirm activation.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01616126&lc=en&product=3793676&tmp...
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02759940&lc=en&product=3793676&tmp...
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04395332&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

    Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

    Hi Tomiwa,
    You cannot print from the iPad to that printer. AirPrint and Bluetooth are completely different.
    There may be apps you can buy that will enable using that printer, but that is not an ideal solution.
    That particular printer has had many bad reviews, and is unreasonably expensive for its features. Considering that you just bought the printer, as well as its lack of AirPrint, I suggest you return it and buy a printer that supports AirPrint.

  • Scanning on my c5280 all in one printer-scanner-copier

    since purchasing my lap running windows 8.1 I have been unable to scan from my all in one printer to my pc. all it allows you to do is to scan the document to a memory card or reprint the image

    Hello , Welcome to the HP Community. I'd like to help you with the issue you are having scanning on your Windows 8.1 system with your HP Photosmart C5280 All-in-One printer. I would suggest installing the full feature software for your product. Fortunately, the full software suite is still available for download for your Windows 8.1 operating system. You can download the software here: HP Photosmart C5200 All-in-One Printer series Full Feature Software and Driver If the issue persists, I suggest trying to install the printer using the Windows Update. You can find all of the steps to do that here (under Step Two: Method Two): HP Single-Function and Multifunction Printers - The Printer Does Not Print in Windows 8 and is Listed as 'Unknown' or 'Unspecified' or Appears with a Yellow Triangle in the Devices and Printers Folder If you're still unable to scan after installing the printer using Windows Update, try downloading the HP Scan and Capture app from the Windows Store. Please respond to let me know if these suggestions helped to resolve your issue!

Maybe you are looking for