HP Potosmart c6380 All in One printer -scanner - copier
Hi just been give a HP Potosmart C6380 All in One Printer - Scanner - Copier , i have no information pack with it. How can i get hold of one to able to connect the printer at home.
Hello lou, What is the operating system on the computer you want to install the printer on? Depending on the OS, you would download the Full Featured Software for that OS.Then making sure you have your USB cord ready to connect the two together, install the software and follow the instructions as it installs. Connect the USB cord when it tells you to. Here is the support page for that printer. It gives the download options and manuals you would want.HP Photosmart C6380 All-in-One Printer Manuals | HP® Support IF you need further help, let me know.Thanks.
Similar Messages
-
All in One Printer/Scanner/Copier/Fax Recommendations
Hi,
I'm looking to purchase an all in one printer/scanner/copier/fax device. I was wondering what recommendations other people have. The main purpose would be to print photos, scan photos and some small business office printing. Note, a fax would be nice, but is not absolutely neccessary.
Scanning photos would be important, since I plan to scan our family's photo albums into iPhoto.
Also, is there a printer than can communicate with the Mini using bluetooth? If so , does it work well?
Since I have limited desk space, size would be an issue (smaller the better).
Looking to spend about $200, slightly more if the cost justifies itself. Less is always better.
Thanks in advance!The Brother MFC-420cn
http://www.brother-usa.com/MFC/ModelDetail.aspx?ProductID=MFC420CN
does everything you ask for less than $100 -- except bluetooth.
The Pluses: Good Mac software. Cheap ink. Networkable.
The construction is flimsy plastic, but if you are gentle it will hold up.
Definitely small footprint.
Paper path is 180 degrees, which is not my preference.
Personally, I prefer Epson all-in-ones. Also good Mac software and 80 degree paper path for less jamming. Exceptional scan quality.
http://www.epson.com/cgi-bin/Store/ProductCategory.jsp?oid=-8182 -
Scanning on my c5280 all in one printer-scanner-copier
since purchasing my lap running windows 8.1 I have been unable to scan from my all in one printer to my pc. all it allows you to do is to scan the document to a memory card or reprint the image
Hello , Welcome to the HP Community. I'd like to help you with the issue you are having scanning on your Windows 8.1 system with your HP Photosmart C5280 All-in-One printer. I would suggest installing the full feature software for your product. Fortunately, the full software suite is still available for download for your Windows 8.1 operating system. You can download the software here: HP Photosmart C5200 All-in-One Printer series Full Feature Software and Driver If the issue persists, I suggest trying to install the printer using the Windows Update. You can find all of the steps to do that here (under Step Two: Method Two): HP Single-Function and Multifunction Printers - The Printer Does Not Print in Windows 8 and is Listed as 'Unknown' or 'Unspecified' or Appears with a Yellow Triangle in the Devices and Printers Folder If you're still unable to scan after installing the printer using Windows Update, try downloading the HP Scan and Capture app from the Windows Store. Please respond to let me know if these suggestions helped to resolve your issue!
-
Can't scan from brand-new HP PSC 1600 all-in-one printer/scanner/copier
Just installed this new all-in-one, and the printer and copier work perfectly. But when I try to scan, it won't do anything. Error message says to configure a "scan destination." But the menu to do so, on the desktop, won't open at all. Just stalls and stalls. Everything else seems to work fine, so no connection problems. Anybody know how to shake this menu loose?
iMac G3, iBook G3 Mac OS X (10.3.9)I've been using the HP psc 1210v for about a year now, and I've always been able to print, but scanning (which I do very infrequently) has always been a problem. Typically, to use the scanner, I have to remove the printer and re-install with the latest drivers from HP's (currently 7.7.2).
So, after doing this again, I was able to scan a couple of images by using the "HP Device Manager". I just double-click on "Scan Picture", which opens the "HP Scan" application, and I can choose from there how to scan; either opening in another Application or Save to File.
I'm using 10.4.6, but I know I originally scanned some images using this printer in 10.3.9. Hopefully this will continue to work!
Mac mini G4 Mac OS X (10.4.6) -
Re: scanner failure hp 4280 all in one printer scanner copier
Can anyone help me please?
I have an HP Photosmart C4280 which will print but will not scan when using it with my Apple Mac.
I have looked at the various posts and have installed, deleted, re-installed. The Mac sees the printer and sees the scanner too.
This morning the printer has now decided to print in miniature so that anything that I print you need a magnifying glass to read. This is so aggravating. I have tried to resolve this but have failed miserably.
Any suggestions would be gratefully received. Thanks!
This question was solved.
View Solution.If you are using Snow Leopard and have HP software for pre-Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the HP software on your Mac before you upgraded - even if you did a standard uninstall of the old software or installed new software over the top of it) you must uninstall the software using the 'scrubber' option:
Go to Applications/Hewlett Packard/ click on HP Uninstaller
Click on Continue
Highlight your device on the left pane
Hold the Ctrl, Opt and Cmd keys and click on Uninstall
There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
Click Continue and let it finish
Restart your Mac
Now, run a Software Update.
Finally, download and install the "Full Featured" Driver and Software from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
My printer wont turn off or respond -- HP Photosmart C4280 All-in-One Printer - Scanner - Copier
My printer quit working and stays on all the time. I cant shut it off and the on light keeps blinking.
Hello sgusta ,
Please perform the below mentioned step.
Make sure the printer is ON.
Unplug the Printer Power cable .
Unplug the USB cable from back of the printer in case you have the printer connected with USB.
Wait for 30 - 40 seconds.
Plug in the Printer Power cable.
The issue should be resolved by performing the above steps.
If the issue still exits, then do call the HP Tech Support (US) 1-800-474-6836
Regards ,
Jabzi
Help the community by marking this post .
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP. -
HP Photosmart C4480 All in One Printer Scanner Copier
I am scanning scrapbook pages with a white background. However, my scanner picks up reds and/or pinks and tints the white parts of the page, so I am not getting a true color. Is there a way to adjust?
Hi JavaJoan,
Let me please take a moment to say "Welcome" to the HP Forums. I see that this is your first visit with us. I hope you enjoy your experience!
To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having some issues with lines on your copies.
This could possibly be a power issue. Please make sure you have the printer power cable connected to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I also suggest that you try the document that deals with Vertical Bands, Lines, or Streaks in Copies or Scans.
Please write me back if you are still having issues. If I don't hear back from you today, I hope you have a Fantastic Tuesday.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Trying to download printer driver from my cd, HP psc 1315 all in one printer scanner copier
I have the original cd to install the printer driver, it comes back saying it failed because I am not the administrator. I have check my settings and i have checked that anyone can do that?
Apparently it now works OK with Leopard ... install the driver and restart the printer.
http://discussions.apple.com/thread.jspa?threadID=1757715&tstart=0 -
PHOTOSMART C8100 SERIES ALL IN ONE PRINTER, SCANNER, COPIER
I HAVE HAD THIS PRINTER FOR A WHILE NOW BUT AFTER A SHORT WHILE OF BEING ABLE TO PRINT WIRELESSLY AND SCAN THINGS TO MY COMPUTER IT STOPPED AND I HAVE TO PUT IN A USB TO PRINT OFF AND IT WONT SCAN TO MY COMPUTER. I HAVE AN APPLEMAC PRO....ANY SUGGESTIONS?
Hello,
I would suggest uninstalling the software and then reinstalling it.
Also, how long is the USB cable?
DO you have any anti-virus programs on your PC?
Are you having an issue just making a standalone copy from the PC? -
I have an HP Photosmart C4180 all-in-one, printer, scanner and copier. I can't figure out how to scan more than one page? It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement. Any ideas??
Thank you, JetteskiHello Jetteski,
Hello Jetteski, Thanks for the post.
Since you are running a MAC, check the below links for some excellent information on scanning. Good Luck!
http://goo.gl/M8Cl2
http://goo.gl/cufK6
http://goo.gl/OTQoR
I work for HP but my posts and replies are my own....Thank you! -
Problem setting up HP 6310 all-in-one printer/scanner
I have just installed archlinux for the first time, and so far everything is working great except for a HP 6310 all-in-one printer/scanner. This printer is connected by wire to a router, and the computer communicates with the router over a wireless connection. I have managed to install the printer through cups and print a test page. The problem is getting hplip and sane set up. I belive that if I get hplip set up correctly that that will take care of the sane problem.
Trying to install the printer with hp-setup:
[mike@archy ~]$ sudo hp-setup -i 192.168.1.104
Password:
HP Linux Imaging and Printing System (ver. 3.9.12)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
Setting up device: hp:/net/Officejet_6300_series?ip=192.168.1.104
| PRINT QUEUE SETUP |
Please enter a name for this print queue (m=use model name:'Officejet_6300'*, q=quit) ?
Using queue name: Officejet_6300
Locating PPD file... Please wait.
error: No PPD found for model officejet_6300 using new algorithm. Trying old algorithm...
Found PPD file: drv:///hp/hpcups.drv/hp-officejet_6300_series.ppd
Enter a location description for this printer (q=quit) ?computer room
Enter additonal information or notes for this printer (q=quit) ?
Adding print queue to CUPS:
Device URI: hp:/net/Officejet_6300_series?ip=192.168.1.104
Queue name: Officejet_6300
PPD file: drv:///hp/hpcups.drv/hp-officejet_6300_series.ppd
Location: computer room
Information:
error: Printer queue setup failed. Please restart CUPS and try again.
Restarting cups doesn't change anything.
Running hp-check gives this:
[mike@archy ~]$ hp-check
HP Linux Imaging and Printing System (ver. 3.9.12)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
| SYSTEM INFO |
Basic system information:
Linux archy 2.6.32-ARCH #1 SMP PREEMPT Sat Jan 23 13:53:44 UTC 2010 i686 Intel(R) Pentium(R) III CPU 1133MHz GenuineIntel GNU/Linux
Distribution:
unknown 0.0
Checking Python version...
OK, version 2.6.4 installed
Checking PyQt 4.x version...
OK, version 4.6.2 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.4.2
error_log is set to level: debug
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
| COMPILE AND RUNTIME DEPENDENCIES |
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
| HPLIP INSTALLATION |
Currently installed HPLIP version...
HPLIP 3.9.12 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.9.12
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.9.12
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=yes
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.9.12.29
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hp:/net/Officejet_6300_series?ip=192.168.1.104
[installation]
version = 3.9.12.29
date_time = 01/24/2010 15:48:05
| DISCOVERED USB DEVICES |
No devices found.
| INSTALLED CUPS PRINTER QUEUES |
Officejet_6300_series
Type: Unknown
Device URI: socket://192.168.1.104
PPD: /etc/cups/ppd/Officejet_6300_series.ppd
PPD Description: HP Officejet 6300 Series, hpcups 3.9.12
Printer status: printer Officejet_6300_series is idle. enabled since Sat 23 Jan 2010 02:26:45 PM CST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.
| SANE CONFIGURATION |
'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
| PYTHON EXTENSIONS |
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
| USB I/O SETUP |
Checking for permissions of USB attached printers...
HP Device 0xb1d at 004:002:
warning: Device URI: (Makeuri FAILED)
| USER GROUPS |
lp wheel network video audio optical storage scanner power users mike
| SUMMARY |
error: 1 error or warning.
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.
I have a feeling that the problem is here:
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.
Something about the backend isn't right, but I'm out of my depth here. Any suggestions would be appreciated.
One other point. It works with no problem in Ubuntu with both hplip and sane, so I know it is possible. I just haven't figured out the trick yet.Well, it's fixed now, but I'm not sure why. I hooked up a HP 3970 usb scanner to my computer and when I started xsane it not only found it, but also found the 3610 all-in-one on the network. I checked hp-tools, and the 3610 was there also.So everything is working now, but I'm still curious as to why the 3610 wouldn't work with sane and hp-setup until I plugged in the 3970 to the computer.
-
Power problem with my 4620 all in one printer / scanner / fax
Hi,
My problem is this. I have a 4620 all-in-one printer / scanner / fax. However, I have discovered this problem.
Scenario:
The printer hasn't been used for a day or two but is plugged in still with the light above the power cord on. I want to print a word doc or whatever. I click print. I obtain a message that the computer (via wifi) can't communicate with the printer. Pressing the Power on button on the printer interface doesn't work.
My solution, I have to disconnect the power supply from the printer, then reconnect and then press the Power On button.
This isn't normal I think. I don't think for one minute that I should have to go and disconnect and reconnect the power suppy for it to print etc.
Any ideas?
Thank you in advance!!maybe here: http://discussions.apple.com/thread.jspa?messageID=11110856� ?
found doing a quick search of the forum
all results here: http://discussions.apple.com/search.jspa?objID=c263&search=Go&q=laser+printer
JGG -
Scan Control from HP 1210 All in one Printer/Scanner
I now have Macbook with OS 10.6.8.
Used to have 10.4.11
We have an HP 1210 All in one printer/scanner.
With 10.4 there was a very clear and user friendly utility provided by HP that enabled good scan control.
It enabled multiple choices of destination filetype and multiple pages scanned into a single document.
Now I have 10.6.
I have done S/W update both with printer connected and disconnected.
I have been offered and have downloaded the latest version of s/w from HP.
Nowhere on my Mac is there a file that has any name like HP, Hewlett Packard or PSC or 1210
The utility is there somewhere because I can print, and, if I have the printer active, I can use the utility to check ink levels etc.
However the ONLY scan facility is the Mac IMage Capture.
This only does single pages and only scans to jpeg.
What do I have to do to get my full scan control facility back and active as provided by HP
Steve Bsteve.br wrote:
However I repeat, There is no s/w that the system can find that is labled HP, Hewlett or PSC or 1200. Not in applications or Utilities or anywhere I can see.
If I use the Finder File Find utility I can search for files with any of those attributes and nothing related is found.
Path should be HD/Library/Printers/hp
Within the hp folder are several folders with one titled "Utilities" and within that folder is the application HP Utility
Path HD/Library/Printers/hp/Utilites/HP Utility
Since it's to be accessed from the System Preferences Print & Fax tab/pane/icon or within Image Capture, that is why those files are not in the Applications folder nor Utilities folder. It is not to be launched directly, i.e., double clicked. Be careful accessing files in the main Library folder (i.e., HD/Library/).
FYI: I have all those folders on all my computers each using a different OS even though the only HP printer I use is a 1995 Laserjet 4MV.
I Have just done a test using the SystemPreferences Printer area and get sent to the Image capture function.
So, that was after clicking the Scan tab in System Preferences > Print & Fax? It's most likely using the HP Software that you noted downloading in your original post. It is not using some phantom software.
I want to be able to save a multiple page document file in .pdf format.
I use Acrobat Professional to scan as PDF with a Brother multifuction device that is equiped with a 30 page auto document feeder (ADF). Since the HP 1210 is a flat-bed scanner, it seems that your wish can be achieved by scanning and saving each page as separate documents and then combining those documents. I cannot remember whether Apple Preview in 10.6.x offers combining PDFs but there are a number of freeware and shareware apps that can.
Is there a conversion capability that would convert from .jpeg to .pdf
Apple Preview, Adobe Photoshop, GraphicConverter are just a few apps that come to mine.
Thanks for your help.
You're welcome. A lot has changed since Mac OS 10.4.11. Hope the above helps too. -
What is the maximum paper thickness a C6380 all in one printer can use?
What is the maximum paper thickness a C6380 all in one printer can use? I want to print wedding invitations
HI,
Paper thickniss it will print depends on the paper size as well. FInd the paper specs HERE.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution" -
Error: OXfOaf 8004 for HP office jet 5510v all in one printer fax copier scanner
HP office jet 5510v all in one printer, fax, copier, scanner. Error message: see above subject for error info. My printer is like frozen...can only shut off by unplugging. Help..please and thank you!
Use the Setup (wrench icon) button on the front of the printer to look through the settings menu to set the printer time and date.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Maybe you are looking for
-
I'm thinking to buy ipod and I have a question before buying it: When I connect ipod to computer how is windows recognize it? As a hard drive? and I got another one, will charger work in Europe?
-
I am making a sign for sign writing. The overall size is 2400mmx1800mm. so its quiet big. But When I go to put a drop shadow behind it it comes up with this - " The combination of artwork size & resolution exceeds the maximum that can be rasterized"
-
Automatic generate the PO in extend classic scenario
HI ,expert : I work in SRM7.0 and extend classic scenario. requirement : The employee create SC manually .If the SC is complete ,the following document PO will generate automaticlly .And if the SC is incomplete ,the purchaser can do "carry
-
When I click on a bookmark, it appears as a sidebar. Help!
I want to click on a bookmark and have it appear int he regular tabs not as a sidebar. How do I make this happen?
-
This is regarding an old post that hasn't been answered: http://discussions.apple.com/message.jspa?messageID=9883233#9883233 Basically I cannot upload videos sent from a Sprint PCS mobile to my email account because Windows technology is required. I