HP Probook 4440s CPU upgrade?

Hi, I have a HP Probook 4440s and I am slightly confused as to what CPUs my laptop is compatible with. My issue is mostly understanding the socket type. I have found from various sources that my laptop has a G2 cpu socket which has something (that I cannot fully grasp) to do with PGA988. I would like to buy a Intel Core i5 3380M if possible but it is listed as being for socket PGA988. Is this CPU compatible with laptop? I know the G2 socket and PGA988 are related in some way and they might be the same but I cannot find a concrete source that says either way
This question was solved.
View Solution.

McSquid wrote:
It currently has a sandy bridge Core i3 2370M which is why I wanted to upgrade
Well, Ivy Bridge is backward compatible with Sandy Bridge so the socket must be the same but the chipset is more important. What's the graphics card? Is it only the Intel HD or is there a dedicated vga?
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Similar Messages

  • Probook 4530s cpu upgrades

     I was wordering for an upgrade on my probook 4530s i would like to know some or all if able proccessors for this laptop.... can you tell me some??

    Hi @AKTG
    I see that you are looking for a list of compatible processors for your ProBook 4530s.  Here is the Maintenance and Service Guide for your model.  On page 97 you will see a list of compatible processors and how to replace it.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Probook 4440s-no media's(au​dio and vedios) sound but system sound is coming

    I am using a probook 4440s with Windows 8 pro. I am not able to listen any sort of audio except system sounds and online vedios. all my drivers in my device manager looks good. please help!! 
    This question was solved.
    View Solution.

    Hello shaurya21.  I understand you're having some issues with your sound.
    Did you get the 4440s with Windows 8 installed or did you install it?  If you installed it, did you do a clean install or an upgrade?
    Has the sound ever worked properly?
    Since you're getting sound from online videos and system notifications this implies the sound does work.  So, could you elaborate more on the instances in which it does not work?
    @DavidGreene.  HP provides their own driver scanning application called HP Support Assistant.  It is recommended that customers utilize this program to ensure that they have the correct drivers.  Problems could ensue if using a third party application.  To use HP Support Assistant the HP Software Framework must also be installed.  Here is a link to the HP Software Framework and here is a link to HP Support Assistant.
    I hope you both have a wonderful day.
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • ProBook 4440S brand new malfunctio​ning

    I just got a brand new HP ProBook 4440S. As soon as I turned it on I went to the McAfee website to install antivirus. I noticed it was very sluggish - i.e. it took 5-10 minutes for the buttons to light up so I could click and then took another several minutes to start IE once I was able to click. It connected to the McAfee site quickly as it should and downloaded the antivirus without issue.
    In order to install McAfee I had to reboot the computer. When I restarted the computer it began downloading Windows updates (83 of them). It took 8 hours to finish then it gave me a message saying the Windows updates failed.It then restarted.
    Once the computer restarted it ran the disk check utility for several hours. A whole lot of lines that read "File record segment ###### is unreadable." It will not boot from the CD it came with.
    This is a BRAND NEW computer! Ridiculous.
    I can't get the product number from the computer because I can't boot it up to find it. I have the model number and serial number, but I can't get onto your tech support with either of those numbers so I can get some help.
    I received the computer through a 3rd party government purchaser so I cannot return it - I don't know where it was purchased. I cannot return it to the purchaser.
    This is very frustrating, as I NEED this computer starting next week.
    Where can I take it to get it working right, repaired, or exchange it under HP warranty?

    This is NOT official HP Customer Support and I, as most other persons on this forum, do not work for HP. This is a peer-to-peer user supported forum for HP consumer class products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Any reply from a HP employee represents their own opinion and not that of HP's.
    Please contact official HP support in your region / country via the HP Worldwide Support Portal, to request warranty service.
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • AMD Athlon 64 3800+ cpu upgrade to AMD Athlon 64 X2

    Hello everyone,
    First of all, I have been to cpu-upgrade.com and typed in my current (CPU)--> AMD Athlon 64 3800+ 2.40GHz (motherboard)--> ASUS A8M2N-LA (Naos) GL6. 
    According to the website, my AM2 Socket (940pin) is capable of upgrading to a Dual Core, Anyone know if that site is accurate or not? Any help would be nice. I need to get away from this single core. 
    1) Some CPU models require a BIOS upgrade, which a BIOS upgrade for this board is not available.
    2) A lot of X2 Dual Cores work either using a 4400+, 4600+, and so on....
    I do have a 550watt PSU installed, also I am using MSI Nvidia GeForce GT620 PCI-express 16x graphics, not using onboard.
    I have read that some BIOS' upgrades terminate the onboard video, is that true? Basically, whatever I already have installed is current and up to date with all video/sound drivers, etc... If anybody very knowledgable knows for sure if an AMD Athlon 64 X2 will work in my system that would be nice. My specs below......
    OS: Windows Vista Home Basic (32bit)
    CPU: AMD Athlon 64 3800+ 2.40GHz
    RAM: 2GB (GDDR2)
    PSU: 550watt (all 20+4 for main cable to motherboard connected using all 24 pins + 4pin connector for CPU? I believe.
    Sound: Realtek HD ALC888 High Definition Audio
    Video: MSI Nvidia GeForce GT620 (GDDR3 with 2GB Video Memory).
    Only thing I am bottle necking on is the CPU, and I would love to upgrade to Dual Core, once again, thank you for the help.

    Hello @bigsnake,
    I understand you are looking to upgrade your processor on your Compaq Presario Media Center SR2013WM Desktop PC. I am providing you with a link to a CPU-Upgrade thread concerning your very question ASUS A8M2N-LA CPU compatibility list. Now this is the only information I have been able to find concerning a processor upgrade for your Compaq Presario Media Center SR2013WM Desktop PC.
    I hope this helps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • CPU upgrade on Satellite L30-101

    Hi, I have a Toshiba Satellite L30-101. I've upgraded the RAM successfully to 2GB (2x 1GB) but I'm finding it incredibly hard to get information on processor replacements.
    The laptop has the latest BIOS on it (3.10-WIN - 19/02/08) but when trying to find information regarding whats in it I'm hitting brick walls. Firstly the site > http://www.toshiba-tro.de/biosinfo/ < doesn't have my laptop on it,
    Product Type: Notebook
    Family: Satellite
    Product Series: Satellite L Series
    Model: ? unknown
    Short Model No: ? unknown
    I did hope I could stick an Intel Duo in but with the ATI chipset, I'm pretty sure it wont work but again without knowing whats within BIOS, compatible.. I'm lost. The only processor I can find which may work, same package, FSB, socket is an Intel Core Solo Processor T1350 which kicks out 1.86 GHz, not a massive difference and I'm sure it can't be the only replacement option.
    Could someone and staff please help me with getting hold of BIOS info and compatible processors for my laptop. The current Intel Celeron M Processor 410 kicking out 1.46 GHz isn't good enough for Vista (cert on laptop) and basic multi tasking. Its lagging way too much even after a good tune up, ram upgrade, HD upgrade to 7200RPM. I'm in need of a processor upgrade but as mention finding it incredibly hard to obtain information of which would be compatible.
    Sincerely,
    Gourcuff

    Hello
    In my opinion your attempt to replace CPU is wrong. Why? Satellite L30 is not designed to offer some fabulous performance and it is designed for everyday usage. Best evidence for this was the price. It was not so expensive.
    Can you please tell us why do you want to have new CPU? Do you use some special software?
    Back to CPU replacement. As you probably know mobile computers have limited upgrade options and it is related to RAM and HDD upgrade. It is definitely unprovided for CPU upgrade and it is not supported. Specific design, especially cooling system is designed for certain CPU.
    Due to all this you will not be able to find any relevant info about CPU replacement.
    Check please this Toshiba document - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  • Is CPU upgrade on Satellite 2410-303 possible?

    My Satellite 2410-303 has Pentium 4 Mobile 1.7GHZ processor. I want to upgrade its processor to Pentium 4 Mobile 2.8GHZ. I think that it is possible because its upper models have faster processor and that is unique difference between them.
    Please, help me for this question and tell me is it possible?

    Hello
    You will be very lucky if someone has so good experiences with CPU upgrade on Satellite 2410 but on this forum you can find very nice comments about that. I have founded just two of them but very interesting. Check it out!
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=87488
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=59708
    Bye

  • Sound coming from both speakers and headphones at the same time in probook 4440s

    I have a Probook 4440s with windows 8 pro(64 bit) with IDT high definition codec installed. Yesterday when i was playing some songs i noticed that the sound was coming from both headphones and speakers even when my headphones are plugeed in and my lappy was having no such problems a few hours earliers while i was watching a movie. Please help..

    It may be because you have both the internal speakers and headphones enabled at the sametime on your laptop. This might just happen automatically when you plug your headphones in. You need to manage your audio devices on your laptop.
    Go to Control Panel> Hardware and Sounds> Manage Audio Devices> Playback Tab (which should already be selected)    
    In the playback tab there should be a list of all the audio devices you are using on your computer. Right click on the one you don't want to use and click disable. This should stop the sound coming from that audio device. 
    Remember: You will need to enable that audio device if you want to listen to sound through it again. Your internal speakers won't work once you enable them again. This might also be the case with your headphones. You may also have to do this every time your plug in a device or once you restart your computer.
    Another note: Sometimes disabled devices will not show up on the audio device list so once you disable a device it will dissappear. This is an easy fix too. Just right click on an audio device and make sure show disabled devices and show disconnected devices is checked.
    I hope this helps.
    (I was using a computer with Windows XP to explain the instructions but it should be similar with your Windows Operating System. You may however have to play around a little on your computer because it may be slightly different) 

  • Satellite M40x will not boot up after CPU upgrade test

    I have an M40x Laptop. I took the CPU out of it to replace it with another to test the computer booted up fine so I shut down and took it out and put it's original CPU back in, and it would not boot. Now it will not boot up at all with either of the CPU's all. When I turn on the power all I get is a white screen for a few seconds and the laptop shuts itself back down. Both the CPU's are good because I have since tested them in other computers to make sure that was not the problem.
    Anyone have any ideas on what is causing this??

    Im not surprised.
    As far as I know Toshiba does not support any CPU upgrades and it's not advisable to do something like that.
    Its a fact that the CPU replacement on the notebooks is not easy and mostly not recommended.
    The processors used in portables are connected to the system board using a process called TCP (Tape Carrier Package). This is a permanent connection method and is used in the interests of miniaturization and heat dissipation.
    Did you assign the new heat paste? Its necessary and important if you want to connect the CPU again.
    So possibly this is a reason for the no booting.
    I think more details you will get from the service guys in your country

  • CPU upgrades

    I'd like to upgrade a tray-loading iMac with the CPU from one of the faster slot-loading ones - 350, 400, whichever.
    I'd also like to swap a 450 or 500 MHz CPU from a DV SE that had firewire into the earlier, ordinary slot-loading version, which didn't.
    Does anyone know if there's any reason there would be a problem doing either of these changes?
    For that matter, if the DV motherboard's okay, any reason I couldn't use the whole thing in the slot-loader? I think there's a video problem, but if that's just a monitor thing and not on the board, it shouldn't be an issue.
    Thanks

    you are correct, the slot loaders do not have a separate CPU card, its soldered directly to the logic board.
    There are CPU upgrades available for tray loaders (don't know if any are actually still produced anymore, but they do exist), but the cost usually just isn't worth it. You could get a used slot loader for the same amount,a nd a used eMac or mac mini for a little bit more.

  • 1.0/1.1 GHz G3 Powerlogix CPU Upgrades in Beige G3

    There have been very few postings of upgrades to the Powerlogix 1.0 and 1.1 GHz G3 CPU upgrades over at xlr8yourmac. Any of the upgraders here have any experience w/ this CPU upgrade in a Beige G3? Comments positive or negative? Problems?
    I'm currently running a 466 MHz CPU in a Beige MT and am looking for a little more quickness. I've already maxed out the RAM and am running a ATA-133 Maxtor HDD on a ATA-133 SIIG PCI card.

    Thanks for your comments. There are very few xlr8yourmac postings for the newer Powerlogix G3 upgrades in a Beige G3, but several for the B&W G3s. Likewise, xlr8yourmac's own CPU upgrade comparison using the new Powerlogix G3 upgrade was done w/ a B&W. The problem is that the B&W's were so different from the Beige, so quirky, and in fact so different from the front to the back of their production cycle that I wouldn't rely on their results as typical for the G3 upgrades. That said, most of the B&W upgrades w/ the Powerlogix 1/1.1 GHz IBM chip were favorable.
    I ruled out the G4 upgrades for my Beige based on the long string of horror stories of those early adopters of G4 upgrades for their Beige G3s. They may have solved those problems, but I decided some time back, based on various web discussion threads, that G4s and the Beige just don't live and play well together.
    It is true that the 66 MHz buss is starting to be a noticeable choke point. But, for the most part, speeding up what you can speed up, compensates for that problem. No, it can't make it into a new machine, but a used Mac at 933 MHz on ebay is going for almost $1K, and I can approach that performance for a lot less additional investment.

  • HP8000 elite SFF; what CPU upgrades are available

    I've just bought an HP 8000 Elite SFF desktop (WB717ET#ABU) with a Pentium DualCore E5400 CPU running at 2.7GHz.
    I was wondering what CPUs the Motherboard (Rev 0C by the looks of it) could accept in order to squeeze more performance out of it (and how simple such a CPU upgrade would be)?
    This question was solved.
    View Solution.

    This image is from the maintenence manual for the HP 8000 Elite
    Upgrading to a Core 2 Quad Processor or a Core 2 Duo would be a great improvement in power.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Dv6-1216sa cpu upgrades?

    running win 7 32bit, (although will be upgradeing to 64bit soon)
    bios up to date F:18
    current cpu: AMD Turion X2 RM-74 2.2GHz
    currently my ram is 4gb, which i can only use 3 of hence the upgrade to the 64 bit os soon
    i will be upgradeing to 8gb ram,
    just wondering what are my cpu upgrade options? would rather get the most out of this laptop, cant afford to buy a new one, willing to put about €100 into this

    Hi:
    I am not an expert on AMD processors.
    If you think the ZM isn't a whole lot better (you need to look at the specs more than just the speed), then I wouldn't do it.
    The speed isn't a whole lot different and the L2 cache is the same.
    Normally the faster processors will run hotter when all else is equal (voltage, etc).
    Upgrading the memory is the cheapest, easiest route to a better performing PC.
    And definitely keep the vents and fan clean of lint and dust as much as possible.
    Paul

  • CPU upgrades for a G4

    I just bought a PowerMac G4 from eBay. I'm new to Macs and so far I haven't found much info on this model. It is an M5183, 733MHz, 512MB. I would like to upgrade the CPU. What are my options? What should I look for on eBay?

    Also review the user report database on this site:
    http://forums.xlr8yourmac.com/cpureview.lasso
    You select your Mac model and the brand of CPU upgrade you are considering and get a number of user reports on how the install went and how it works.
    NOTE: When you select your Mac model, you probably should choose "Apple G4 AGP Slot" unless you know you have a dual processor model.
    You might want to ask in the Apple forum for for older G4 desktops (yours is older than the late FW800s and MDDs covered in this area) to see if someone else has already performed such an upgrade on a machine like yours:
    http://discussions.apple.com/category.jspa?categoryID=113
    I'm a little confused about which model you really have at this point. The M5183 number returns a Powermac G4 (AGP graphics) that had a 400, 450, or 500 nHz processor. I wonder if yours was already upgraded once (doesn't affect future upgrades).
    Look for extra stickers on the back and see if any have "M" numbers that end with capital L's, a slash (/) followed by another letter (example: M7825LL/A, M7825LL/B). Those may help narrow the search.
    A good resource for Apple Specs and how they were configured is the MacTracker database. Its format is more consistent than Apples' specs sheet format, making it easier to cmpare models. It's free and it's here:
    http://www.mactracker.ca/
    You can also run System Profiler (do "About this Mac" and click "More Info.." in the resulting window. On the first screen is "Hardware Overview." Copy/paste that (without the serial number) into a post here and that should precisely nail down your model.

  • CPU upgrades - UK

    Has anyone in the UK tried this CPU upgrade from Daystar?
    http://daystar-store.com/index.asp?PageAction=VIEWPROD&ProdID=555
    I am unsure about, due to the shipping, and I was worried it would cost me much more. At the current exchange rate, the 1.83ghz upgrade - which is the one I would like to get, comes in at £236.96.
    Could someone tell me what the basic shipping cost to the UK would be?
    Thanks

    I may be cynical, but I read the promo on this chip and you're only getting a very slight gain in clock speed. Trouble is you still have the same system bus performance. I've upgraded chips before and got a slight life extension. But with the Macbook Pro on offer, surely the money is better invested in a replacement laptop?

Maybe you are looking for

  • DVD back up not working in Itunes, CD ok

    I submitted enclosed the Diag for Itunes. It won't let me back up my Library to DVD or a hard drive. It will allow me to backup to CD but that is a bit nuts if I have a DVD and media. Can you see if any help is available. I lost my music when my Hard

  • Iphoto 9.4.2 crashes on photo import

    Process:         iPhoto [1559] Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto Identifier:      com.apple.iPhoto Version:         9.4.2 (9.4.2) Build Info:      iPhotoProject-710042000000000~1 Code Type:       X86 (Native) Parent Proc

  • TS1702 U.S. & Canadian App stores

    When trying to download an app, I received this error message:  Your account is not valid for use in the U.S. store. You must switch to the Canadian store before purchasing. How do I do this??

  • OneToMany relation over composite PK query error

    We have two classes with composite PK's on both sides. The classes are related via OneToMany relation (and ManyToOne vice versa). The mapping basically works, but if a simple query is issued like "select stp from Teilstp stp" we get the strange error

  • The SAP Network Forum message?

    Hi, I am getting frequently this message " The SAP Network Forum is currently down", whenever i access to this forum, I like to know to is because of my connection speed or something else? Thanks Sa_R