HP QA center sizing

I cannot find any info about hardware sizing for HP QA center. any recommendation as far as CPU, RAM and storage is concerned on a windows box ? Just planning to use basic functions for about 10 users at a time.
also, any sizing recommendation for ARIS for Business process modelling with Solution Manager ?
Thanks a lot,
VM

Why don't you refer QC admin guide it has all information right and also contact HP if needed.

Similar Messages

  • Does Intelligent Management Center Support UPS's?

    My IT department is getting Intelligent Management Center to replace some monitoring in SolarWinds. I want to know if Intelligent Management Center supports UPS's and what brands?

    [email protected] wrote:Hello everyone! I am curious what everyone does in their standard client accessswitch closet, do you have UPS's in every closet or do you have nice surge suppressors to protect your client access switches?  Sent from Cisco Technical Support iPad App
    How big is your network, and how much money do you have to spend?
    I've most recently been working on data-center sized networks, and they tend to be covered by large, center-wide UPS's with generator backup - the UPS and associated rectifiers isolate the protected kit from any chance of surges, so they're not needed on a rack-by-rack basis.
    That's not a viable option for a smaller network or client base, so you sometimes need to think outside the box - one place I'm working on has two racks, one large UPS in the bottom of one rack and a PDU for each rack running the essential hardware (switches, servers, not monitors or non essential stuff) running off the one UPS.
    There's no one size fits all solution - if you have widely distributed network closets/racks and don't want to put a UPS in each rack, your best bet might be getting switches with redundant power supplies and ensuring each supply runs off a separate electrical phase - since a lot of power outages only affect one phase at a time, you can often survive brief otuages on the secondary supply until the primary is restored.
    Cheers

  • The "size" pop-up window

    You “pros” probably like this pop-up size info. I never use it. How can I turn it off?
    Thanks.

    Te onbly way I can think of to get a loaded cursor (other than during a Place operation) is to click on the inport or outport of a text frame. You can't disable this, so you need to train yourself to be careful where and how you click.
    The most common time I see this is when I have a text frame that is too short to show both the vertical center sizing handles and the ports, so the ports are shown. If you click and hold on teh port in that situation you should see the cursor change to the double-ended sizing arrow.

  • UPS's in switch closets?

    Hello everyone! I am curious what everyone does in their standard client access
    switch closet, do you have UPS's in every closet or do you have nice surge suppressors
    to protect your client access switches?
    Sent from Cisco Technical Support iPad App

    [email protected] wrote:Hello everyone! I am curious what everyone does in their standard client accessswitch closet, do you have UPS's in every closet or do you have nice surge suppressors to protect your client access switches?  Sent from Cisco Technical Support iPad App
    How big is your network, and how much money do you have to spend?
    I've most recently been working on data-center sized networks, and they tend to be covered by large, center-wide UPS's with generator backup - the UPS and associated rectifiers isolate the protected kit from any chance of surges, so they're not needed on a rack-by-rack basis.
    That's not a viable option for a smaller network or client base, so you sometimes need to think outside the box - one place I'm working on has two racks, one large UPS in the bottom of one rack and a PDU for each rack running the essential hardware (switches, servers, not monitors or non essential stuff) running off the one UPS.
    There's no one size fits all solution - if you have widely distributed network closets/racks and don't want to put a UPS in each rack, your best bet might be getting switches with redundant power supplies and ensuring each supply runs off a separate electrical phase - since a lot of power outages only affect one phase at a time, you can often survive brief otuages on the secondary supply until the primary is restored.
    Cheers

  • Hp c4280 photo-smart added to new hp pavilion dv7 notebook. printing custom sized paper won't center

    I recently bought an HP Pavilion dv7 notebook and added my HP C4280 printer. It prints normal things fine, but when I try to print with custom size paper (for instance, 5" by 10" notecards) and want my information centered in the middle of the page, the alignment prints it in the middle of an 8.5" by 11," way off center. I've read help on word and hp and can't find an answer. The only difference is an updated version of word.
    I did download the patch and had no luck with that. Any suggestions would be great! Thanks!

    Hi - It definitely sounds like the SW or printer driver isn't recognizing the paper size.  First thing I would do is make sure that the paper size in both the printer driver and in Word match.  For the printer driver, go into File, Print and you should see an option for Printing Options or Printing Properties.  Click there and verify that you've got the paper size set correctly.  In Word (not sure which version you're using) 2010, go into Page Layout and choose Size to make sure it matches the printer driver.  Try printing again.
    I'm assuming you're using the printer driver that came with the printer?  If not, you can download the latest Win7 driver from here.  Once downloaded, install it and follow the steps above.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • Problem with JPanel sizing!

    Hi,
    Just having a bit of difficulty with the sizing of JPanels. For example, if I create a JPanel and add it to a Frame, no matter what I set the size to the JPanel fills the entire Frame. I don't really know whats going on here and I'm just making guesses! If anyone has a good resource on the whole sizing thing or can point out what I'm doing wrong, that would be great. Thanks!
    // Constructor
    public void ClassName()
            mainWindow = new JFrame();
            mainWindow.setSize(mainWindowWidth, mainWindowHeight);
            mainWindow.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            JPanel aPanel = new JPanel();
            aPanel.setSize(mainWindowWidth/2,mainWindowHeight/2); );
            aPanel.setBackground(Color.GREEN);
            mainWindow.add(aPanel);
            mainWindow.validate();
    }Edited by: LeWalrus on May 18, 2009 5:03 AM

    By default, JFrame uses a BorderLayout which gives the center component (your panel in this case) all available height and width.
    For absolute positioning you need to use a null layout.
    If you want a layout manager that can let your panel fill half the height/width, I think it might be possible with GridBagLayout or more recommended MiGLayout (but that adds a third party jar dependency).
    See the [layout tutorial|http://java.sun.com/docs/books/tutorial/uiswing/layout/index.html].

  • How do i Pate frames from one movie to the center of another? please help?!

    what i am trying to do is, put a flash frame by frame movie into my flash web site. So i go to the frame by frame movie and hit Edit- Time line - Select all frames. i then hit Edit- Time line - Copy frames. i switch over to my web site, Create a new layer select the layer and hit Edit - Time line - Paste Frames. and the frames i copied are pasted into order and all my symbols are brought into my library. The problem is than when it is pasted its pasted in the upper left hand corner of the page on top of all my other stuff when i select the the frames of the frame by frame movie and move them to the center of the stage. It seems to work fine but when i test my movie the first frame will be fine and than some stuff goes back to the original pasted spot and some stuff will stay where i moved it to. my question is. How do you paste the frame by frame movie to the center of the stage so it does not have to be moved at all?
    or else how do i move all frames and objects to where i want them and not just the first frame?

    when you copy and paste frames, object positions will be maintained from the copied to the pasted frames.
    if you want to edit multiple frames simultaneously, click edit multiple frames (an icon in the timeline panel just below frame 22, if you're using normal sized frames).

  • How to I print a center footer which includes the word "Page" as part of the Page # of #?

    I want to print out multiple pages when I go to a specific URL and I want to also print a custom center footer which actually prints out the word Page as part of the Page # of #, normally if you choose the specific Page # of # you only get printed out as an example 1 of 2, it does not cause the word Page to be included in the printout?
    a

    Hi Nes,
    This is the second time you are posting a variation on this question.
    I was about to so NO YOU CAN'T...
    but then I thought...
    It is possible to print just parts of a front panel but it is a lot easier to do the things others have suggested.
    If you really want to print just a part of the FP you will have to do a lot of coding and the GUI will do some strange things in the process.
    I will outline the process and leave the code as an exercise for the reader.
    Using property nodes determine where on the FP the objects of interest are located.
    Again using property nodes, move the objects around on the FP so that they are grouped together and sized such they fit on a printed page.
    Using property nodes adjust the screen size origin etc so only
    the objects of interest are now visable.
    Using.....nodes print only the visable part of the screen.
    Using....nodes put everything back where is was when you started!
    Like I said, this is not easy.
    The simplest solution was suggested by BJD who said group the objects of interest on a tab page, use an invoke node to get the image and then display it on the FP of a sub-VI set to print on completion. That method will let you quickly add new interesting objects to the print out without having to change the sub-VI.
    Trying to help,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Officejet pro x476dw legal sized paper adf scan

    Hi,
    I have been using officejet pro x476dw for 6months, and I figured out that I can't scan 2-sided legal sized document.
    Is it impossible to scan 2-sided legal size documents on ADF?
    Do I have to scan them MANUALLY?
    If this machine doesn't support 2-sided legal paper scanning, is there any other ways to make this work easy?
    I often have to scan over 40 pages with 2-sided legal sized paper..
    Please help me out experts....TT
    I heard, Ricoh and Canon offer some drive to make it possible using software..
    Does HP offer this kind of software too?...TT

    The tray can be extended for legal size paper.  Remove the tray and note the blue release lever on the left side.  Releasing this lever will allow expanding the tray to legal size.  After expanding the tray move the center slider to provide appropriate alignment of the loaded paper.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Title Font Size in Final Cut Pro 6 for exhibition on movie theater sized screen

    When editing a documentary and creating title cards (that play as part of the movie - text center of screen on black b.g.), lower thirds identifying speakers, and end credits (both single card and scrolling) are there some standard fonts and font sizes people use so the end result will not look too large when projected on a movie screen?
    The titles are all from Final Cut Pro (a few from the Boris plug-in for FCP6) and there are no titles that move or that are created in Motion.
    I will be able to make additional edits with the fonts sized for tv, streaming, DVD distribution etc. if I'm lucky enough to end up needing those as well.
    Thanks!

    If the titling is properly composed for the frame size, it will look correct when projected. That is, if it looks font is legible and in decent proportion in your 1080 timeline, it's not important whether the display is 30 inches or 45 feet; the proportion will not change.
    In terms of font selection, medium or bold sans-serif fonts work well on all screens.  "Plain" fonts like Helvetica, Ariel, or Lucinda tend to work better than the more stylized fonts, but if style is part oif your message, be my guest...
    hope this helps

  • How to center title text and table across two columns

    Hello,
    I want to be able to center a table and its title across a two column page. The pages where I want to do this contain text in both columns or text in the left column and graphics in the right. On the same pages as the text and graphics, I'd like to center, across both columns, a table with a title. What is the best way to do this?
    If I insert the table in the left column, I can size it to fit over both columns but I can't type directly into the cells that cover the right column (I can type in the cells covering the right column if I Tab to them but it's tedious and doesn't seem right). With the table's title, I've tried using the Across All Columns paragraph setting, but the text stays in the column the paragraph marker is in.
    We are using Frame 8 on Windows XP Professional. The Master pages are Right and Left pages that are set up with two columns, both tagged as A with the Autoconnect feature on so that the text flows from the bottom of the left column to the top of the right.
    Please let me know what you think.
    Thanks,
    Tim

    Yes, equal-sized columns. No, they're always equal. And that answers
    David's question: you're using two frames because you want unequal columns.
    Frame's paragraph-level column controls only work on columns made by
    dividing a single frame into two or more columns. So you're back to
    square one: you need two frames because your columns are unequal; you
    need one frame so you can span columns.
    Another possibility is that you might set up your document with a
    sidehead column, but I hesitate to recommend this because I still can't
    quite envision what your layout looks like. Any chance you can post a
    PDF somewhere?
    Kenneth Benson
    Pegasus Type, Inc.
    www.pegtype.com

  • How to I center a dialog box in the screen?

    Simple question, and I hope a simple answer.
    I need to center various sized dialog boxes in the screen.
    I've tried getcenterpoint(), but I don't know EXACTLY how to use it.

    look at the ToolKit class. there's a method which returns the size of the screen. with the size, you can calculate and use the setLocation() method to center your dialog box.
    you can also use the setLocationRelativeTo() method of the Window class. (JDialog inherits the method from Window)

  • Viewport Sized Text Help

    So I'm making my first responsive theme for a client through my school as a class project and I'm having some trouble. I have msot everything figured out except for the auto-resizing text and am kinda of stumped. I found this: http://css-tricks.com/viewport-sized-typography/ an all CSS way to resize text versus the javascript alternative.
    Here is the testing environment that I'm working on: http://wordpresstestingenviroment.mckennastudios.com/
    If you make the window smaller you'll notice the text in the header does scale in it's size, but the problem is as it scales down it starts to change it's position and I was wondering if anybody could help me fix that?
    The other problem I'm having is setting the vmax doesn't seem to be working.
    Here is my code for these header elements:
    .banner {
      width: 100%;
      max-width: 1600px;
      margin: 0 auto;
      position: relative;
    .banner-img {
      width: 100%;
      height: auto;
      max-width: 1600px;
    .banner-top {
      background-color: rgba(153,77,23,0.8);
      position: absolute;
      width: 100%;
      top: 0px;
      left: 0px;
      padding: 12px;
      color: #ffffff;
      font-size: 2.1vw;
      font-size: 2.1vmax;
      font-family: "Times New Roman";
      text-align: center;
      height: 10%;
    .banner-mid {
      position: absolute;
      width: 34%;
      max-width: 580px;
      color: #ffffff;
      left: 50%;
      margin-left: -265px;
      top: 25%;
      font-size: 3.4vw;
      font-size: 3.4vmax;
      text-shadow: 3px 5px 12px #000000;
    .banner-bot {
      background-color: rgba(138,80,15,0.9);
      position: absolute;
      width: 100%;
      bottom: 0px;
      left: 0px;
      height: 17%;

    Try this quick & dirty example by pasting code into a new, blank document.  Preview & resize in browsers.
    <!doctype html>
    <html lang="en">
    <head>
    <meta charset="utf-8">
    <title>Responsive Layout</title>
    <meta name="viewport" content="width=device-width, initial-scale=1">
    <!--[if lt IE 9]><script src="http://html5shiv.googlecode.com/svn/trunk/html5.js"></script><![endif]-->
    <style>
        margin: 0;
        padding: 0;
        -moz-box-sizing: border-box;
        -webkit-box-sizing: border-box;
        box-sizing: border-box;
    img {
        max-width: 100%;
        vertical-align: baseline
    body {
        font-family: "Lucida Grande", "Lucida Sans Unicode", "Lucida Sans", "DejaVu Sans", Verdana, sans-serif;
        background: #C97417 url(http://wordpresstestingenviroment.mckennastudios.com/wp-content/uploads/2015/01/sunset-roa d-banner-imready4change.jpg) no-repeat center center fixed;
        -moz-background-size: cover;
        -webkit-background-size: cover;
        background-size: cover;
    header {
        text-align: center;
        color: #FFF
    h1 {
        background: rgba(140,83,15,0.5);
        font-size: 20px; /* Some fallback that doesn't look awful */
        font-size: 3.6vw;
    h2 {
        font-size: 52px;
        font-size: 9vw;
        margin-top: 5%;
        text-shadow: -1px 3px 2px #333;
    h3 {
        font-size: 22px;
        font-size: 4vw;
    p {
        font-size: 16px;
        font-size: 2.9vw;
    section {
        background: rgba(142,94,40,0.7);
        width: 80%;
        margin: 0 auto;
        padding: 2%;
        overflow: hidden; /*to contain floats*/
    section.bottom {
        background: #C97417;
        text-align: center;
    button {
        width: 60%;
        line-height: 9vw;
        font-size: 22px;
        font-size: 6vw;
    article {
        background: rgba(209,187,155,0.5);
        float: left;
        width: 50%;
        padding: 2%
    .right {
        background: none;
        color: #FFF;
    /* Special Rules for mobiles */
    @media only screen and (max-width: 599px) {
    /**keep text readable in smaller devices**/
    p { font-size: 16px }
    section { width: 100% }
    article {
        float: none;
        display: block;
        width: 100%
    </style>
    </head>
    <body>
    <header>
    <h1>Heading 1 text</h1>
    <h2>Heading 2 text</h2>
    </header>
    <section>
    <article class="left">
    <h3>Heading 3</h3>
    <p>Lorem ipsum dolor sit amet, consectetur adipiscing elit.  Mauris vitae libero lacus, vel hendrerit nisi!  Maecenas quis velit nisl, volutpat viverra felis. Vestibulum luctus mauris sed sem dapibus luctus.  Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus.  Aenean tristique enim ut ante dignissim. </p>
    <h3>Heading 3</h3>
    <p>Lorem ipsum dolor sit amet, consectetur adipiscing elit.  Mauris vitae libero lacus, vel hendrerit nisi!  Maecenas quis velit nisl, volutpat viverra felis. Vestibulum luctus mauris sed sem dapibus luctus.  Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus.  Aenean tristique enim ut ante dignissim. </p>
    </article>
    <article class="right">
    <img src="http://wordpresstestingenviroment.mckennastudios.com/wp-content/uploads/2015/01/img.fw_.pn g" alt="details">
    <h3>Heading 3</h3>
    <p>Lorem ipsum dolor sit amet, consectetur adipiscing elit.  Mauris vitae libero lacus, vel hendrerit nisi!  Maecenas quis velit nisl, volutpat viverra felis. Vestibulum luctus mauris sed sem dapibus luctus.  Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus.  Aenean tristique enim ut ante dignissim. </p>
    <h3>Heading 3</h3>
    <p>Lorem ipsum dolor sit amet, consectetur adipiscing elit.  Mauris vitae libero lacus, vel hendrerit nisi!  Maecenas quis velit nisl, volutpat viverra felis. Vestibulum luctus mauris sed sem dapibus luctus.  Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus.  Aenean tristique enim ut ante dignissim. </p>
    </article>
    </section>
    <section class="bottom">
    <h3>Heading 3</h3>
    <p>Quisque varius scelerisque nunc eget rhoncus.  Aenean tristique enim ut ante dignissim. </p>
    <button>BUTTON TEXT</button>
    </section>
    </body>
    </html>
    Nancy O.

  • CompositionElement sizing issue needs to be addressed.

    Ok, so it's not just the PosterFrame and VideoElement inside a SerialElement that's sizing wrong.  It's anything inside a Parallel or Serial Element that includes an element with a temporal trait, and a static element such as RTMPPosterFrameElement, PosterFrameElement, or ImageElement.
    I just tried to use ScaleMode.LETTERBOX with a ParallelElement that included a progressive AudioElement, and ImageElement.  The ImageElement does not size properly, and can be replicated in your ExamplePlayer flex project.
    Just add the MediaPlayerWrapper to a container with a smaller fixed size (like a canvas container at 320x240 ).  You will notice that no Serial or Parallel Element with a static element will scale properly.
    This needs to be addressed.  The direction for this functionality is great!  Having a Posterframe for Audio and Video is a must ... but it currently does not size properly.  The only acceptable ScaleMode is NONE.

    The Layout system was created after our UI components, and a separate UIComponent was created to work with the Layout system.  We have a backlog item to fix this in the current sprint, starting today.  I have a work around below which demonstrates how to use this little know component call a RegionGateway.   Cheers!
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
    layout="absolute"
    creationComplete="init()"
    xmlns:players="com.adobe.strobe.players.*">
    <mx:Script>
    <![CDATA[
    import org.osmf.media.MediaPlayer;
    import org.osmf.metadata.Metadata;
    import org.osmf.gateways.RegionGateway;
    import org.osmf.layout.RegistrationPoint;
    import org.osmf.display.ScaleMode;
    import org.osmf.layout.LayoutUtils;
    import org.osmf.proxies.TemporalProxyElement;
    import org.osmf.utils.URL;
    import org.osmf.media.URLResource;
    import org.osmf.image.ImageLoader;
    import org.osmf.image.ImageElement;
    import org.osmf.composition.SerialElement;
    private static const REMOTE_IMAGE:String = "http://mediapm.edgesuite.net/osmf/image/adobe-lq.png";
    private static const REMOTE_IMAGE2:String = "http://mediapm.edgesuite.net/strobe/content/test/train.jpg";
    private var region:RegionGateway;
    private var serial:SerialElement;
    private function init():void
    serial = new SerialElement();
    serial.addChild(new TemporalProxyElement(5, new ImageElement(new ImageLoader(), new URLResource(new URL(REMOTE_IMAGE)))));
    serial.addChild(new TemporalProxyElement(5, new ImageElement(new ImageLoader(), new URLResource(new URL(REMOTE_IMAGE2)))));
    serial.addChild(new TemporalProxyElement(5, new ImageElement(new ImageLoader(), new URLResource(new URL(REMOTE_IMAGE)))));
    serial.addChild(new TemporalProxyElement(5, new ImageElement(new ImageLoader(), new URLResource(new URL(REMOTE_IMAGE2)))));
    for( var itr:Number = 0; itr < serial.numChildren; ++itr)
    LayoutUtils.setLayoutAttributes(serial.getChildAt(itr).metadata, ScaleMode.LETTERBOX, RegistrationPoint.CENTER);
    LayoutUtils.setRelativeLayout(serial.getChildAt(itr).metadata, 100, 100, 0, 0);
    region = new RegionGateway(serial.metadata);
    wrapper.addChild(region);
    serial.gateway = region;
    var mediaPlayer:MediaPlayer = new MediaPlayer(serial);
    invalidateDisplayList();
    protected override function updateDisplayList(w:Number, h:Number):void
    super.updateDisplayList(w,h);
    if (region)
    LayoutUtils.setAbsoluteLayout(region.metadata, stage.stageWidth, stage.stageHeight);
    ]]>
    </mx:Script>
    <mx:UIComponent
    id="wrapper"
    width="100%"
    height="100%"
    />
    </mx:Application>

  • Problems printing on custom sized paper.

    Hello all,
    I am trying to iron out my problems with printing on custom sized tractor paper (using an impact printer). Every time I print a test page, the printer behaves as if it was loaded with tractor paper that is 11 inches long, rather then the 7 inches that the forms are on.
    Before I list my code, let me explain everything that I have done. I am running Windows XP, so I went to the Printers and Faxes folder, clicked File > Server Properties, and created a custom form size (8.5" wide by 7" long with zero margins). Going back to the Printers and Faxes folder, I right clicked on the impact printer and clicked properties. From there I clicked the Device tab and selected my custom form that I had created for the tractor feed section. I then clicked the general tab and clicked the printing preferences. From there I clicked the Paper/Quality tab and selected Tractor Feed for the source. Then I clicked the advance button and selected my custom form for paper size. I also changed the resolution to 360X180.
    The printer itself has hardware settings for paper size. I've went through the menu and selected 7 inches for the form length.
    Now going to the code, I created the paper object and set it size to 612 for width and 504 for height. I also changed the ImageableArea to the size of the paper (which I think eliminates the margins), and set its orientation to 0, 0. I then set the paper object to the PageFormat, and used drawString to test my settings.
    Program compiles fine. When I run it and click the button, I select the correct printer. I also went through the preferences to make sure that all the setting are correct (especially to make sure my custom form is selected.). The closest I can get the string to the corner of the page is 75, 80. On the paper it measures 7/8" from the left, and 1" from the top.
    I have tested my custom form settings with word 2007. I was able to get the text on the very corner of the paper, and the printer was able to determine where the next form started. I believe that my problem lies within my code. Any help would be greatly appreciated!
    Thanks!
    import java.awt.*; 
    import java.awt.event.*; 
    import javax.swing.*; 
    import java.awt.print.*; 
    public class Print01 implements Printable, ActionListener { 
        public int print(Graphics g, PageFormat pf, int page) throws 
                                                            PrinterException { 
            if (page > 0) {  
                return NO_SUCH_PAGE; 
            double width = 612; 
            double height = 504; 
            Paper custom = new Paper(); 
            custom.setSize(width,height); 
            custom.setImageableArea(0,0,width,height); 
            pf.setPaper(custom); 
            Graphics2D g2d = (Graphics2D)g; 
            g2d.translate(pf.getImageableX(), pf.getImageableY()); 
            //The following returns the correct dimensions (612 width, 504 height). 
            System.out.println("Width: "+pf.getImageableWidth()+" Height: "+pf.getImageableHeight()); 
            g.drawString("Testing", 75, 80); //Smaller values result in clipping. 
            return PAGE_EXISTS; 
        public void actionPerformed(ActionEvent e) { 
            PrinterJob job = PrinterJob.getPrinterJob(); 
            job.setPrintable(this); 
            boolean ok = job.printDialog(); 
            if (ok) { 
                try { 
                     job.print(); 
                } catch (PrinterException ex) { 
        public static void main(String args[]) { 
            UIManager.put("swing.boldMetal", Boolean.FALSE); 
            JFrame f = new JFrame("Test page printer."); 
            f.addWindowListener(new WindowAdapter() { 
                  public void windowClosing(WindowEvent e) {System.exit(0);}}); 
            JButton printButton = new JButton("Print test page."); 
            printButton.addActionListener(new Print01()); 
            f.add("Center", printButton); 
            f.pack(); 
            f.setVisible(true); 

    I have a similar code to print a jasperreport,
    when I ran on Windows, the report is printed normally, all the document appeared, but when I ran on Linux (Debian), the document is missing some parts of report, printed without lines, appear only the middle of report. I don't understand what happen, on windows is ok, but linux is wrong. I tried the margins, but didn't work.
    Some one have an idea that can help me?
    sorry my english, but I need print in linux.
    Thanks a lot
    JasperPrint jasperPrint = JasperFillManager.fillReport(diretorioProjetos, parametros, getConexao().getConnection());
                getConexao().close();
                PrinterJob job = PrinterJob.getPrinterJob();
                /* Create an array of PrintServices */
                PrintService[] services = PrintServiceLookup.lookupPrintServices(null, null);
                int selectedService = 0;
                /* Scan found services to see if anyone suits our needs */
                for (int i = 0; i < services.length; i++) {
                    if (services.getName().toUpperCase().contains("HPD1360")) {
    /*If the service is named as what we are querying we select it */
    selectedService = i;
    job.setPrintService(services[selectedService]);
    PrintRequestAttributeSet printRequestAttributeSet = new HashPrintRequestAttributeSet();
    MediaSizeName mediaSizeName = MediaSizeName.ISO_A4;
    printRequestAttributeSet.add(mediaSizeName);
    printRequestAttributeSet.add(new MediaPrintableArea(
    0f, 0f,
    85f,
    54f, Size2DSyntax.MM));
    //MediaSize.findMedia(85f, 54f, Size2DSyntax.MM);
    printRequestAttributeSet.add(new Copies(1));
    JRPrintServiceExporter exporter;
    exporter = new JRPrintServiceExporter();
    exporter.setParameter(JRExporterParameter.JASPER_PRINT, jasperPrint);
    /* We set the selected service and pass it as a paramenter */
    exporter.setParameter(JRPrintServiceExporterParameter.PRINT_SERVICE, services[selectedService]);
    exporter.setParameter(JRPrintServiceExporterParameter.PRINT_SERVICE_ATTRIBUTE_SET, services[selectedService].getAttributes());
    exporter.setParameter(JRPrintServiceExporterParameter.PRINT_REQUEST_ATTRIBUTE_SET, printRequestAttributeSet);
    exporter.setParameter(JRPrintServiceExporterParameter.DISPLAY_PAGE_DIALOG, Boolean.FALSE);
    exporter.setParameter(JRPrintServiceExporterParameter.DISPLAY_PRINT_DIALOG, Boolean.FALSE);
    exporter.exportReport();

Maybe you are looking for

  • 10.6.8 running really slowly and failed to start up 4 times

    Hello, My MacBook Pro (which is about 4 years old) wouldn't start up 4 times, I just got the blue screen with the apple and nothing.  Had to turn off.  Eventually it started and now its running REALLY slowly. Any thoughts would be most helpful to get

  • Problem of installing trial version(Illustrators)

    I downloaded creative cloud and try to install trial version of Illustrator on PC Window 8.1. However it always show"install failure". I have try to close the anti-virus software and the installation is still failure.  Does it mean that there are som

  • Authorization based on personnel subarea

    Hi All I have to set up an authorization for my HR users restricted upon their location of work. I have set up personnel subarea for the same. However, am not able to find the personnel subarea object in the profile generator screen for the role. For

  • My Magic Mouse Will not scroll or left click?

    At 11:08 pm my magic mouse would not do anything but right click. I can not scroll either way, nor can i rightclick. I have tried System prefrences. What do i do?

  • Adobe CS4 Design Premium Set Up Error

    When I try to set up adobe design premium on my mac I get a set up error. I already repaired permissions and clean uninstall everything adobe told me to do, but Its still giving me an error message. I have a screen shot also. Im thinking my hard driv