HP update HP Officejet 6500A Plus e-All-in-One Printer-E710n multi fails @ 96%Z

HP Officejet 6500A Plus e-All-in-One Printer - E710n
Windows Vista
HP is trying to update my HP Officejet 6500A Plus e-All-in-One Printer - E710n w/ "HPZSetup.exe & multi fails @ 96%
HP-PhotoSmart All-In-One Series "Error" "wStub" "2229580"
     Same message appeared multiple times with new numbers: 459624; 525134; 328216
I am on WIFI but system always shows me on USB.  I thought maybe that was the problem so I connected by USB. No Help.
I assume this is an update??  HP is insistant and keeps sending me this update which alwaysends in FATAL ERROR at 96%
Next steps??  Thanks JLM_JR
This question was solved.
View Solution.

No Problem. Is everything working now or this tool only removed the HP software? If so, then try downloading the full feature software to see if this fails or not here. Please choose your correct operating system; Either 32 bit or 64 bit. I will be looking forward to hearing from you.
I worked on behalf of HP.

Similar Messages

  • Problems printing to HP officejet 6500A plus e-All-in-one printer e710n

    I am struggling to print to my " HP officejet 6500A plus e-All-in-one printer e710n". According to the setup network test (Wireless network test report), everything is successful (status "PASS" for all fields).  I also checked that the IP configured is the same as the IP displayed on the printer when i push the wireless button (updated via "Update IP address").
    I have a laptops as well as netbooks connected to the wireless network. All these devices could previously print, however now none of them can. When i run the diagnostics (both the standard trouble shooter, as well as the one from microsoft when clicking on the fixit option), no problems are detected. When checking the device manager, i can see no conflicts.
    When i open the printer control panel and click on "Customize your printer" and then go to "Ports" and click on  the "configure port" option, i get an error "An error occurred during port configuration. Operation could not be completed (error 0x0000007b).".
    Please assist with any suggestions.

    I was able to resolve the problem.
    I reinstalled the printer on one of my other laptops (this might have cleared up an error on the printer). I think the true problem is related to the fact that we left the printer on, we've started switching it off when not in use. Even though it goes into sleep mode, it seems to cause problems over time if not switched off on the printer itself. 
    The basics i did was check the network connection, printed a status of the network connectivity (you can do that from your control panel on the printer). If the network looks good, then try leaving your printer off for an hour or so, if that doesn't work, try reinstalling the printer on your device and start switching it off after use. I know it sounds crazy, but that's what i've been doing and haven't had a problem since.
    It was a strange problem, in some cases i wasn't able to see the printer from devices that previously could, when the devices that could see the printer tried to print, it would print okay for a few pages and then start printing garbage, followed by failing completely and cancelling the print. When this happened there would be an error on the device saying it cannot connect to the printer, even though it could at the start of print.

  • HP Officejet 6500A Plus e-All-in-One Printer - E710n wireless print and web app problem

    We have an HP Officejet 6500A Plus e-all-in-one Printer - E710n and run Windows 7 on our laptop.
    I have run the wirelss setup wizard and have successfully connected the printer to the router, and both the laptop and printer are on the same network and have identical SSID.
    However, we can not send any prints the printer wirelessly. We have to hook it up to the USB to do so. We are also unable to access our web apps; pressing the app button on the printer control panel brings up the following:
    "Connection error. The printer was unable to connect to the server. Check your internet connection and try again."
    I have run through the suggested solutions under "A Network Connected Printer Cannot Access Print Apps, Web Services, or ePrint" in the customer care help centre which didn't work, although when I tried to enter the IP address under IPv4 into the browser address bar it timed out. I tried the HP Print and Scan Doctor, but it returns a result that suggests everything is fine.
    I turned off the firewall and tried again with no luck.
    I really am at a loss now. Diagnostics say it should work, but it doesn't. Help!

    Disable Bitdefender altogeher and try again.
    Also, see this: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02251103
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP OfficeJet 6500A Plus e All in One Printer E710n-z

    I have the HP OfficeJet 6500A Plus E710n-z series for All-In-One Printer.  I lost my driver software disk together with the PC computer that had the  software driver installed in it.
    I now have the Printer and my current PC ( which is using Wins 7 Home Premium 64-bit Operating System).
    I have found the download link for the driver software from HP website and from the internet.Each time I download the driver software, there was a "cancel" or "unable to proceed" message at the almost end of the download process. I was told to "retry".
    My humble request is to have the driver software files so that I can install the driver and operate the printer. My PC is functioning as it can detect correctly the Printer with its correct name and model.
    I donot know the problems. Is it a virus?
    Alternatively, I greatly appreciate if you could email to me the driver software files.( Please use Google Cloud if the files are too big). 
    Thank you for helping me.
    Best regards.

    Since you have 10.10, you will first need to install this: HP Printer Drivers v3.0 for OS X. With that installed, follow the steps to add a printer here: Installing Your HP Printer Driver and Software for Mac OS X.
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Officejet 6500A Plus e-All-in-One Printer - E710n Sharing without a homegroup

    I have a HP netbook DV7 with Windows 7. A Dell 15R 5520 (the last of the netbooks) with Windows 7 and a HP 6500A all in one printer. I would like to use the printer on both computer wirelessly without creating a homegroup. Is this possible? If so I would appreciate any help on the setup.

    As long as printer is connected to a router and has a valid IP address, computers connected to the router will be able to access the printer even if there 2 or more computers connected to the router.
    Please refer following link for more info.
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • HELP!!!! HP Officejet 6500A Plus e-All-in-One Printer - E710n - will not stay online

    I have 2 desk tops a net book and a lap top connected to it and all test printed fine and then after a period of time the printer goes off line and then it will not work.  I can restart the printer and it still will not work.  The router does not even "see it" although it can ping it...???  I have reinstalled software and restored factory settings... I tried saving the IP that did not help.  It is brand new and I checked and it has the most recent firmware updates.  I have run network test reports and all is fine.  I tried an HP print diagnostic and it can't see the printer.  I got it to work temporarily after completing a router reboot, but now that is not working either.  I just bought this today and I have spent the last 5 hours researching and troubleshooting.  I am not overly tech savvy and I have exhausted my knowledge base and the info suggested on blogs and fix it sites. 
    I was replacing my hp all in one wired printer that the print head just went out on after only a little over a year.  I don't know if I need to return this printer or if there is a magic fix??? Please help! 

    You can refer to the link below for the paper sizes and types supported by this printer here:
    I work for HP.

  • Will my hp officejet 6500a plus (e-all-in-one printer - e710n) be able to handle 14pt C2S paper?

    I'm just wondering if my printer will be able to handle that thick of paper without ruining the quality of the print.  I've been trying to find the paper thickness limitations for this printer but I can't seem to find them anywhere.

    You can refer to the link below for the paper sizes and types supported by this printer here:
    I work for HP.

  • HP Officejet 6500A Plus e-All-in-One Printer - E710n, Driver cannot download

    The driver stops downloading part way. Tried many browsers

    I am sorry you are having an issue with downloading the drivers. I would check with your Internet provider since this seems to only be happening on your PC. Your Internet could be dropping the connection, if even for a millisecond or a few seconds. Any drop in connection can cause downloads to fail.
    I hope this helps
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓



    Anthoulla wrote:
    ... Do u have any suggestions....?
    Yes. These days I prefer Brother printers. They appear to have engineered their printers with AirPrint as well as OS X compatibility from the start, unlike certain others who appear to have included it as an afterthought.
    Brother's models are inexpensive, their ink is also inexpensive and lasts a long time, and their photo quality is at least as good as HP's. They have a two year warranty and lifetime free technical support with people who understand Apple.
    Read the reviews (Amazon for instance, but be sure to read user reviews on the various manufacturer's websites as well) and decide for yourself.
    If you require AirPrint compatibility, or if there is any possibility you may need it in the future, limit your search to printers that specifically indicate AirPrint compatibility.
    Brother™ Monochrome Laser Printer and All-in-One models now support AirPrint.
    Brother™ Color Inkjet All-in-One units now support AirPrint.
    I have no affiliation with Brother but theirs was the first inkjet printer or "all-in-one" I have ever owned that simply works as well as the Macs I am accustomed to using. I positively detested every inkjet printer I ever had until I bought the Brother.

  • OCR with HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

    Hello:  I have the "HP Officejet Pro 8600 Plus e-All-in-One Printer model N911g" and read in the manual that it comes with Optical Character Recognition (OCR) software.  I can't find any OCR software on the accompanying optial disk "HP Officejet pro 8600 series, Windows XP, VIsta, 7, 8 version 28.8".
    I'm using an HP Pavilion dv7 laptop running Windows 7 Home Premium ver 6.1.7601 Service Pack 1 build 7601.  
    I found an entry in All Programs called I.R.I.S. registration but can't figure out what to do with it.  Any help is appreciated.

    It's an option during the installtion process. Please try the following Utility:
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What is the best photo paper 4'x6' for HP Officejet Pro 8500A Plus e-All-in-one Printer?

    1.-HP Officejet Pro 8500A Plus e-All-in-One Printer
    2.-OS: Windows 7-64
    3.-No error messages
    4.-No changes have been made
    5.-I have been printing in my with old "hp premium plus glossyphoto paper" and getting very dark photos and too much  wasted ink .
    I've been using "hp premium plus glossy photo paper" and getting very dark photos.
    Before this printer I used a Deskjet 5550 with the same paper and getting great quality. 
    Thank you. Luis Cuenca 
    This question was solved.
    View Solution.

    HI cuencaky,
    Here is a link to a page with an example of good 4 X 6 photo paper you can use with your printer. 
    This type of paper is known to work very well.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • HP Officejet Pro 8600 Plus e-All-in-One Printer N911g wont send SD imapges to computer

    HP Officejet 8600 pro Plus  N911g  model # snprc-1101-01
    I insert an SD card full of photos into the built in card reader - but have no option to send the photos to a file on my computer. Does this product only print but not send to a computer?  I need to edit the photos before printing.

    Hi @Rodney88,
    Welcome to the HP Forums!
    I understand that your HP Officejet Pro 8600 Plus e-All-in-One Printer N911g wont send SD imapges to computer, and I am happy to help!
    According to your printer's user guide found at this website, HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g User guides, as well as this guide, Printing From a Memory Card or USB Flash Drive. This printer only supports printing from SD cards.
    In order to transfer the files to your computer, you will need an SD Card reader for your computer.
    Hope this clears things up for you, and have a good day!  
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.

    HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.  I would like to have a custom size to work with a card making program.

    Can you help me out?
    I have an HP Officejet Pro 8600 N911a
    When I try to print to a custom print size (2.75" x 6" in my case), I get the same error everyone else is reporting: "Paper detected does not match paper size or type selected. Make sure the paper size or type is correct to continue the job."
    I am currently trying to print using Microsoft Word for Mac 2011 version 14.4.5, but I have the same problem with printing from Adobe Reader 9.8.5 or Preview 8.0.
    I am running OS X Yosemite 10.10.
    My printer's firmware is "up to date" as of 28-Aug-2014.
    This is what I did:
    1. Open System Preferences from the Apple menu.
    2. Click on the Printers & Scanners icon.
    3. Click on the + sign under the list of printers to add a printer
    4. Click on IP
    5. Enter my IP address in the Address field (verified as "valid and complete host name or address")
    6. Ignore Protocol field (default is Line Printer Daemon - LPD)
    7. Ignore Queue field (default is blank for default queue)
    8. Ignore Name field (default is IP address)
    9. Ignore Location field (default is blank)
    10. Under the Use dropdown menu, I select "Select Software"
    11. HP Deskjet 9800 is not an option.
    I searched for 9800, but there is no HP printer with that number in the options.
    I tried selecting "HP DeskJet 980C - Gutenprint v5.2.3" to see if that would work, but I received the same error message as above. I tried selecting other random HP printers, but so far I've had no luck.
    I've been googling about for a way to manually add a printer driver to this "Select Software" list, but I've found nothing (apparently, no one else wants to do this). I did not find a driver download for the HP DeskJet 9800 for OS X Yosemite 10.10 on the Drivers & Software section of the hp.com website.
    Additional details on settings for Microsoft Word for Mac 2011 version 14.4.5:
    Selected File > Page Setup from menu
    Under the Paper Size drop down menu, I selected manage custom size.
    - Click + to add a paper size
    - Enter "2.75" in width and "6 in" height in the paper size fields.
    - Enter "0 in" as the User Defined Non-Printable Area for top, left, right and bottom.
    - Double-clicked Untiled in the custom size list and rename the size as Receipt
    - Click OK to return to the Page Setup dialog box
    Under Settings: Page Attributes:
    - Format for "HP Officejet Pro 8600"
    - Paper size: Receipt
    - Orientation: "tall/portrait"
    - Scale: 100%
    - Click OK
    Select Format > Document and set all page margins to 0.25"
    Thank you. 

  • HP Officejet Pro 8600 e-All-in-One Printer - N911a: Scan & Copy in color results in full cyan page

    Product Name: HP Officejet Pro 8600 e-All-in-One Printer - N911a
    OS: Windows 8.1 64 bit
    I noticed the problem: After I scanned a medical card that was 80% cyan.
    Problem: The problem persists when scanning/copying using the ADF or using the scanner glass bed.
    Only occurs during color scanning or copying.  I can print a file from my laptop or home pc with no issues, as long as the color file did NOT come from my printer.
    If I had scanned the small O'Riley's note in black & white there would have been no streaking.
    I have reset, used the HPP Dr., cleaned the glass, etc, & followed Solutions 1 - 3 http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02881567&lc=en&product=4323659&tmp...
    I sincerely appreciate your assistance.

    Hi @Veritasabt, 
    I see that you are having issues scanning and copying in color from the glass and the ADF. Thank you for providing the screen shot. I can help you out today.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    Update the printer's firmware. HP Officejet Pro 8600 N911a Firmware.
    Try scanning again to see if you have the same results.
    Please check your private messages for additional steps to try.
    In the forum beside your handle name just click on the envelope to view it.
    Have a nice weekend!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    I work on behalf of HP

  • HP Officejet Pro 8600 e-All-in-One Printer - N911a printer assistant

    So, I replaced an HP Officejet Pro 8600 e-All-in-One Plus with an HP Officejet Pro 8600 e-All-in-One Printer - N911. Subsequently the HP Printer Assistant desktop shortcut disappeared from my computer --  and apparently from the computer entirely because it eludes searches as well. So multiple times (like, 20 times) I have removed and reinstalled the printer on this computer because sometimes -- not every time, infuriatingly -- immediately after installing the printer from the online driver, the Printer Assistant opens -- but there doesn't appear to be a way create a desktop shortcut for it. As soon as I close it, it's gone forever, and it's just not practical to have the Printer Assistant open all the time. The next time I want to scan something wirelessly, I have to go through the process again. It's driving me insane.
    Is there any way to download just the HP printer assistant software, or some sneaky way to create a shortcut for it? It's the only efficient way for me to interact with the printer for scanning (the bulk of the printer's usefulness) at my home office, and if I cannot get it to work consistently, this will be the last HP product I buy.
    Thanks in advance!

    Follow the steps below to repair the software installation when cliking the HP Officejet Pro 8600 will not launch the HP Printer Assistant software, these steps should resolve a such:
    Please let me know of any change,
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for

  • Real-Time Application doesn't run; source code works fine

    The short version is I'm programming a cRIO and apparently the RT code isn't running after being deployed and I can't figure out why. This is further complicated that I'm doing all this remotely and I don't have direct access to the unit since I'm 50

  • Officejet 7310 duplex printing

    My printer has suddenly stopped printing duplex. It copies a document double sided ok, but won't print a document. I'm using Microsoft Word with Windows XP. It prints page 1 starting at the top of the page and print the text to the bottom of the page

  • Usb harddrive to airport exteme

    I would like some advice on how to use Time Machine to automatically back up my external HD, that's connected to my Airport Exteme.  Another question is: I would like advice on using Time Machine on a second external HD approx. once a month.  This HD

  • DS 6.1 won't start as cluster service

    Hi! RG: hylas-ldap Resources: Logical Hostname hylas HAStorage ldap-data-1 (Diskgroup contains instance data) I installed DS 6.0 and patched up to 6.1. As the topic says... I'm able to start the instance on every node of the Cluster (SC 3.2) with "ds

  • EHP5 Leave Request Team Calendar

    We are in a process upgrading our old Java/Web Dynpro Leave Request application to ABAP Web Dynpro based. In old application supervisors were able to view Team Calendar for both Directly Subordinate Employees as well as ALL Employees. However, new ap