Hp wireless all-in-one 5520 printer stopped connecting to the internet

my wireless hp photosmart 5520 all-in-one printer will print from my wireless laptop, but it no longer connects to the internet. I cannot download apps. i ran a wireless network test and everything is good, except for the internet (not connected) what can i do

Hi Lars,
I'm sorry to hear that you are having problems connecting your printer to the internet.
I have included a document about maintaining wireless connectivity.  Please follow the steps in "Solution two: Assign the printer a static IP address".  When you reach the steps about setting the DNS servers, for the Preferred DNS server please use 8.8.8.8 and for the Alternate DNS server please use 8.8.4.4.   These are Google's DNS servers. Once you have set the manual ip and dns servers, please try to enable web services. It should go through.
Printer Does Not Maintain Wireless Connection
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03250740
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

  • HP 6500 wireless ALL-in-one e709n Printer front panel not responding at all

    Hi there,
    I have got a HP 6500 wireless ALL-in-one e709n printer.
    I have been using it with my pc with windows vista on it for nearly 2 years and it has been great.
    1 month ago, the front panel of the printer stopped responding, ie, when i press any buttons, the lcd screen on the printer does not change, it always show the ink level.
    The printer turns on, shows that its preparing, then goes to idle state with ink level icons on the screen.
    If i try to print any documents, it works with ethernet cable connected to my pc (which i used to do it wirelessly) , the cable-connected printing function still works, but wireless printing does not work anymore. 
    However if i try to scan something, on the pc when i open the hp scan app, it shows that 'scanner is not available'.
    Also because the front panel doesnt work, no buttons respond, i cannot scan or copy.
    I have tried unplug everything and reinstall all drivers and programs.
    No damage to printer or my pc, it just stopped working all the sudden.
    Can any one help me out please?
    cheers,
    Charlie

    Hi Charlie,
    Try going throgh the steps listed below and check if that may help:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02716803&cc=us&dlc=en&lc=en&product=3795406&tmp...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Why are all my devices acknowledging my wireless network through my time capsule, but only one is able to connect to the internet?

    This started when I changed the port for cable modem access.  If I shut everything down- router, MacBook, and iPhone and restart the router... the device I turn on first will connect to the internet.  The second device will read the wireless network but if you attempt to connect to the internet- it states no internet connection is available.  Is this a security feature I enabled unknowingly?  Very frustrated.

    You are using your TC in the wrong way.. in bridge and it has to be in router mode.
    Simply make sure you connect SB5100 to the WAN port of the TC.
    Go to the airport utility, manual setup, internet tab on the bottom and choose connection.. ethernet.. and down the bottom connection sharing.. share a public IP.. sorry I don't have the exact wording as my TC is in pieces being fixed.
    Update and then shut off everything again, particularly the modem.. start everything in order.. modem.. wait 2min.. then TC.. wait 2min then all the computers .. they will get an IP from the TC. With correct address and gateway.
    What was happening is the first device to turn on was capturing the one and only public IP. The rest get local IP without connection.

  • Hi I can not get my printer to connect to the internet.

    Hi
    I can not get my printer to connect to the internet. it is connected to my network according to wifi test printout but my computer can not find it.
    When I try to download apps directly from the printer it says that it is not connected to the internet.
    I have an airport extreme + 3 airport express a macbook pro and printer is an HP 7510e
    I see the printer on the first page in the airport utility when I click on my airport extreme.so it is online but nothing happens when I try to print.
    Please help me

    Hi all,
    Guess I understand what is going on as I'm also experiencing the problem.
    Basically the issue is about the iPhone 4's personal hotspot.
    I'm trying to hook on personal hotspot to my toshiba laptop but it couldnt work as the connection is limited to local only without Internet access.
    The hotspot works well on other laptop and I-devices, but not my toshiba...
    Hope to get assistance here. Thanks

  • HT1976 iPhone 5 has suddenly stopped connecting to the internet away from home

    My iPhone 5 has suddenly stopped connecting to the internet when away from home. It was fine last Wednesday, then on Thursday all I got was 'Safari is no longer connected to the internet'. I cannot use the Messaging, Find my Friends etc.
    As far as I know I have not done anything to alter any settings, but I did change my password on Wednesday - which works, so I think that's OK.
    Has anyone any idea what is happening?
    ictoau

    Hello, ictoau. 
    Thank you for the question.  You may find this article helpful in troubleshooting the carrier data connection issue you are experiencing. 
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    Jason H. 

  • Upon upgrading iPhoto, iPhoto Help no longer works.  It gives the error message:  "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." Help!?

    Upon upgrading iPhoto, iPhoto Help no longer works.  It gives the error message:  "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet."   I am obviously connected to the internet since you are reading this.
    I tried upgrading permissions but it did not help!?  Can anyone tell me what is wrong?  Thanks

    Try
    Reboot the computer, see if that fixes it.
    Then try:
    Backup your files off the computer (not TimeMachine) and disconnect
    Hold c boot off the 10.6 disk and simply reinstalling OS X
    Log in and update to 10.6.8
    c boot off the 10.6 disk again and use Disk Utility >Repair Disk
    reboot and all should be fine, except some third party programs that install kext files, those will have to be reinstalled from fresh sources.

  • My Ipad (3rd Gen) has stopped connecting to the internet via Wifi - please help

    Ipad will not connect to home wifi network, first I get the error message "safari could not open the page becasue the server stopped working" then after about 5 minutes, Safari cannot open the page.......because your iPad is not connected to the Internet.
    Wifi is working (able to connect through Laptop) however, iPad, iPhone and my old iPod Touch all show the same error message.
    Have turned iPad Wifi off and back on, nothing, have also tried "forget network", "renew lease" and "reset network settings"I have also completed soft reset of iPad (held down Home Screen button and stand by button) No improvement.
    I have turned wireless router off, I have also disabled security on router to see if this is an issue and still get the same message.
    Untill 48 hours ago never had a problem..........help greatly appreciated

    This happened to me to, it kinda still does.
    Here is a link, mabie this helps you
    :https://discussions.apple.com/thread/5305515

  • Why does my airport base station show all green lights but doesn't connect to the internet?

    I have an Airport Express Base Station that has been working beautifully up until this morning.  For no apparent reason (changes in ANYTHING), I cannot connect to the internet through it.  Here's the situation:
    The light on the airport is solid green.
    Aiport Utility shows all is well...the base station shows up, with green light, IP address, etc.
    Network Diagnostics shows "your connection to the internet seems to be working correctly."
    Connecting the modem directly to the computer via ethernet cable works fine...internet humming right along.
    Connecting the modem to the base station doesn't work, even though all green lights and "all systems go" diagnostics.
    Wireless access via iPhone and iPad not working, either, so definitely not computer-based issue.
    No changes have been made to anything.  I'm running 10.6.8 on a 2007 MacBook Pro.
    Can anyone help?
    Thanks,
    Nancy

    Hi Bob,
    Thanks for responding.
    Does that IP address start with 169, or something else?
    The IP address starts with 10.0...
    Does this mean that the iPhone and iPad can connect to the wireless network....but not get to the Internet?.....or.....does this mean that the iPhone and iPad cannot connect to the wireless network at all?
    They can see and connect to the wireless network, but aren't connecting to the internet, just like my computer.  Sorry for not being clear about that.
    Can you look on the side of the AirPort Express to locate the model number?  Hard to see, you may need a magnifying glass. Starts with an "A" followed by four numbers, as in A1264, or A1084, for example.
    The model number on the Airport is A1392.
    Any insights based on this info?  Thanks for your help.
    Nancy

  • IMac suddenly stopped connecting to the internet

    So, I left the room for a while and let the screen saver come up, when I came back it wouldn't connect to the internet with any program (iChat, Safari, Firefox, and Thunderbird).
    I connect via ethernet to FiOS but none of the other computers are having trouble connecting.
    It's not a connection problem, thankfully. I connected my ethernet cable to a laptop and it connected perfectly.
    I ran a diagnostics, however it was essentially useless. It told me that it could not connect to the internet or the server, and to check to make sure that the URL was typed correctly... No websites will load, though.
    I did ping my mother's laptop (and my own computer) and it came back fine again, again and again...
    In my limited opinion, it has to be some sort of software problem, but this being so all of a sudden bothers me. If I were on a PC I would think virus, but since it's a Mac, this is not likely at all.
    Please give me some help and ideas, cause I have run out...
    Thanks,
    Mike.

    I used to have the exact same problem, after I cleared my dns cache and renewed my DHCP license everything worked. Strange thing is that, somehow, someway, by some form of magic this problem stopped happening all together so I never had to continue issuing the command everytime. Could've been due to an update shrug
    Type the command below in a terminal. Then renew your DHCP license in Network settings
    -> sudo dscacheutil -flushcache

  • MBP Stops Connection to the Internet

    Hey,
    So I just got a new Mac Book Pro and have been having problems with the internet. I am using an airport extreme for my internet and have wireless speakers set up in my room with an express. For some reason when ever I try downloading media on itunes or stream a video my internet cuts out after about 20-30 min. My wired connection work fine throughout the house but my wireless goes down and I can connect to the internet with any device. If I restart my comp then it works fine. I have had the extreme set up in my house for a few years now and when I just added the express it seemed to have started this problem. Would there be an IP conflict or something, its not a big problem but would like to understand why it happens,
    Never posted on the forums before but hopefully someone might understand the issue,
    Thanks,
    Scott

    "Dynamic WDS" is not a selectable option, not directly at least. It is the default option for extending a 802.11n AirPorts and became available with those models.
    To create a dynamic WDS or "extended wireless network" with a pair of 802.11n AirPorts, you just need to select the options I mentioned earlier on each base station.
    The following is the basic setup steps that you can use to see if you missed anything when configuring your base stations:
    Dynamic WDS - Extending an 802.11n AirPort Wireless Network Setup
    If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
    Open AirPort Utility, and then, select the base station that will connect to the Internet.
    Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
    Click AirPort in the toolbar, and then, click Wireless.
    Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then, select the “Allow this network to be extended” checkbox.
    Next, select the base station that will extend this network, and then, choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
    Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then, choose the network you want to extend from the Network Name pop-up menu.
    Enter the base station network and base station password if necessary.
    Click Update to update the base station with new network settings.
    (ref: Pages 43-44 of Apple AirPort Networks.)
    Also, for better network bandwidth performance, I would suggest that you change your wireless security to "WPA2 Personal."

  • My imac has suddenly stopped connecting to the internet

    When I restart mac it connects to the internet through my personal wifi network for a couple of mins before losing connections it then cannot find any wifi networks all other devices are working fine and do not have any connection issues. Any advice please

    Try posting in the iMac forum. This is the iPod touch forum.

  • My ipad has suddenly stopped connecting to the internet. The settings have not been changed. Why is this?

    My ipad has suddenly stopped connecting to the intenet via my home wifi system. The settings have notbeen changed. why is this?

    The first thing to try is to power down your modem and router for about 30 seconds, then repowering by plugging them back in.
    Also, if that doesn't work, on your iPad you can try going into settings/safari/clear history/clear data and cookies.

  • My iPad 2 is connected to wireless, but safari says it's not connected to the internet

    My wife went on a trip and took our iPad 2 with her.  While she was gone, I had to replace our wireless router (we use AT&T U-Verse).  Wireless works fine on my iMac and on my iPhone 4, but not on the iPad.  I've put in the correct wireless information (Settings says it's connected to the wireless), but I can't connect to the internet.  I've tried updating the software, as well as rebooting my iPad.  Suggestions????

    Here are several things that you can try that might help.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    Check Settings>General>Date &Time>Set Automatically>On.
    Reset your router by unplugging it from power for about 30 seconds and then plug it back in again.

  • Wireless All in one not printing

    I have a HP all in one model cc335a on a  wireless connector that runs on a dsl line.  I am on a network with my lap top and main desk computer. The printer acts like it is printing and kicks out a blank sheet.  I have reinstalled it a couple of times and cannot get it to print.  The align print function fails when I run it.  after I run it I get a print out in blue without any text.  I have run all the utilities and they all come back as Passed.  I am running windows7 32 bit. 

    Hi @mtmom  , and welcome to the HP Forums!
    I understand you're experiencing wireless connectivity issues.  I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    I would also recommend this document on Wireless printing center Troubleshooting Issues.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Our Printer 6700 all in one shows " Printer not connected" on Mac

    Hi,
    We recently changed our router from Netgear to Lynksys. Since then we have problems to print from MAC computers and laptops.
    The Printer is connected properly to the Router, our computers as well and of course on the same network.
    The Macs recognize the printer at first and when we try to print it says 'Printer not connected".
    We reset printing system a few times and still have the same problem.
    Please help , as the printer works properly from an Sony Vaio PC but not from our Macs.

    Hi @AnthonyMiami ,
    I see that you are having issues printing over the wireless network on the Mac computers since changing your router. The PC works though. I would really like to be able to help you resolve this issue.
    Repair the Disk Permissions on the Mac:
    Close all applications.
    On the Apple menu bar, click Go, click Applications and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left.
    Click Verify and then Repair Disk Permissions.
    Restart the computer..
    Reset the Printing System:
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Click the Apple icon and then click System Preferences.
    Click Printers & Scanners.
    Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system.
    Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button.
    Try printing.
    If you are still having issues, add the printer through the IP Protocal to see if you can print, just to rule out a network issue.
    Go to the Apple, System Preferences, Printers and Scanners, click on the + button, select the IP Protocal across the top, type in the printer's IPv4 address, select jet direct below and then Apply.
    Try printing.
    Please let me know the results.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for

  • Overwriting result sets in a file

    Hello, I am querying a database and putting the results into a ResultSets. When the user clicks a button the results are written to an Excel worksheet. However, each time you click the button or write to the worksheet, the ResultSet is appended to th

  • Reflections Welcome page

    on the black or white welcome page in iweb, I can't get the text below photo to publish. I tried to bring it forward and also push photo to back but nothing is working any ideas?

  • Problem with Oracle Prepared Statement

    Hi all, Please help me.. I Have 2 pages, in first page i had table with rows with update image for each row, when i click update it leads to 2nd page which shows the particular row information my problem is, i am executing prepared statement with 2 p

  • If I'll use project performance reporting I need setup PJI before?

    Hi all, If I'll use project performance reporting I need setup PJI before? or no need? Please advice me. Additional Information : I use module PJC and PJT in 12i Many Thanks.

  • FLV embedded with Audio

    I'm creating flv files from videos which include audio which must remain. I'm creating the flv files using Sorensen codec as suggested before in Studio 8 for Flash 7 (company requirement). The flv files must be embedded since streaming is not an opti