Hr abap head counting report

need help in head counting report..
how to calculate the head counting report.
what is the purpose of the head count report.

based on requirement u can create
generally we can create by using PNP/PNCE logical database
if u want example to create report search in SDN u will get lot of examples
Gopi

Similar Messages

Monthly Head count report as per Tax authority

Hi Experts,
Our team need to create report as per client requirements for Monthly Head count report by Tax auth. Please let me know is there any standard report through which we could refer for "Total head count per tax auth" output.
I will appreciate your prompt response.
Thanks,
Ankur

Dear All,
S_L9C_94000095 - Info System -> Reports -> Organizational Entity -> Headcount Changes
Balwant.

Head count report showing list of employees as un assigned 0ORGUNIT

Hi All,
Some of my Head count reports showing a list of employees as not assigned to any organizational unit , but in infocube it is showing org unit .
can any one clarify me onthis .
Thanks in advance.
Babu

I have done investigation all inf cube and master data info objects .
in 0ORGUNIT what i found is
0SOURCESYSTEM
0LOGSYS
both fields are missing .
those two fields effect any data loads.
and one more thing when i reload the data it is showing diffrent amount of employees as un assigned org unit.
Thanks for your prompt responce.

Head count Report

Hi Experts,
We have a requirement at my client's place. the client wants to know the total number of employee's working under a particular department.
For example, In a HR department if there are 4 employees , the report should specify the count ie. give the total number of employees working, not the list of employees.
Please help me with your valuable inputs.
Regards,
Smitha

Hi!
Please use the T-code : 'S_PH9_46000219 - Headcount Changes' to know the headcount and changes report
Regards
Sheetal

HCM: Head cout report for infotype 1019

Dear Experts,
           I am new to HCM abap. I want to develope a head count report of three coloumns
in which I have to show designation/postion, number of overall planned employees in whole organization
for this designation , and number of employees currently working in this designation(in whole organization)
e.g;
Position                                           Planned Employees                             Current Employees
Manager Maintenance                               2                                                             1
Foreman                                                   10                                                           12
Infotype which manage this data is 1019. But I can't see any table to get this data. My question is that how I should proceed with this report, which table, FM etc. I should use to do the above task.
Thanks and Regards,
Sohail

thanks

HEAD COUNT IN HR

Hi guru's,
how do u get head count in HR Report ? what cubes or info need to design ?
Thanks in advance

hi hari,
You can use the info cubes 0PAPA_C02 and 0PA_C01 present in the info area Personnel Administration 0PAPA.
Thanks,
rahul

What is HEAD COUNT with regards to HR Data

Hi Experts
Can you please define HEAD COUNT with regards to the HR Data.
Is it a Count of Employees
Please update me thanks

HI
In HR, the head count term refers to no of employees only...there are some standard reports available for analysing the head count for an org.
Hope it helps
Darshan

Sales Planning, Head Count Planning & Financial planning--Basics

Hi All,
Can someone please help me to understand below mentioned topic in terms of SAP BPC:
Sales planning:
GeneralBusiness Rules
Basic reports in Sales Planning
Head Count Planning:
General Business Rules
Basic reports in Head Count Planning
Financial Planning:
General Business Rules
Basic reports in Financial Planning
Thanks,
Red

Hi Red,
It is difficult to suggest anything on these topics. What you are asking is something on planning processes. No 2 company does the planning in the same way (though, they might belong to the same industry).
It is important to understand the requirements. You might not even required any business rules for Sales and Headcount planning.
It cannot be generalized. You need to understand the requirement, to assess whether you require any business rules or not. Every company has their own reporting requirements.
Hope this helps.

SAP Head Count Planning

Dear All,
i had already implemented SAP Personnel Cost Planning for Employees using the basic pay method , now i am embarking for the head count planning using the organizational objects.
Please if anyone can guide how monetary effect can be seen in SAP PCP if we do quota planning (1019) and planning of personnel cost (1015) , and when we do data collection in PCP which method should i choose and what cost item should i create.
Thanking you all in advance
best regards,
samad farooq

if you are speaking of the Start of the year manpower planning hiring .....
1. you need to first create planning types & periods
   (SPRO->PM->OM-Infotype settings-> Quota planning)
2. go to PP01 and select the Org unit
    create the infotype Quota planning.
3. here you can select the Jobs that you want to plan for.
    (Quota planning as per defined by sap is Planning for Jobs to be created under org units.)
4. The same can be created in planned status and then be approved.
5. Also you may need to go through the reports in easy access menu OM-> Tools-> Quota Planning
S_PH0_48000088 - Delete Unoccupied Positions on Key Date
S_PH0_48000087 - Copying Quota Planning into Another Planning Type
S_PH0_48000086 - Copying the Current Required Positions into a Planning Type
S_PH0_48000085 - Freeze Planned Quota
S_PH0_48000084 - Generation of Positions for Quota Planning
Hope this helps.

Issue with Head count

Hi,
I have a report in BEx 7.0 which displays the Orgunit wise Employee Head count for the month Interval entered by the user. The 0EMPLOYEE is a time dependent charecteristic. For calculating the head count i have created a formula variable as:
Type: replacement path
Ref charecteristic: 0EMPLOYEE
Replace variable with: InfoObject and Charecteristic Reference (Constant 1) with the Calculation After Calculation.
Each employee has an Orgunit as an attribute.
Now when i run the report for period: 01.2010 to 07.2010 it does give me a count but for employees who have changed their orgunit's in this period the report counts it as two. Which should actually be 1 since its a single employee with just a change in Orgunit.
Can you please suggest.

Hi,
Instead of that try to get the head count by making use of Exception Aggregration .
Mke new formula and put 1 inside it then hit aggregation tab and choose count of all values NE 0 and refernce characterstic as
0Employee.
This will give you count of all the employees,now as you mentioned you need to get the count with respect to org unit so fot that make another formula and put your earlier formula inside it and this time choose Aggregation as Total and refernce characterstic as Org Unit .
Hopefully it will give you the correct count.
Regards,
AL
Edited by: AL1112 on May 13, 2011 9:17 AM

How to create 2 lines header in Report painter

Hi. I am not good at Report painter. I want to create 2 lines header in Report painter just like SAP std report.
When I create a new form, I only have one line header form but cannot add additional header line.
I am looking at the 0SAPFS10-01 Trans.Fig.- Balances. which has two header lines
                           Debit              Credit            Balance       Accumulated Balanc
Periods                     &1FY               &1FY               &1FY               &1FY
I can create only one header just like
Periods                 Debit              Credit            Balance       Accumulated Balanc
cannot add additional line for
      &1FY               &1FY               &1FY               &1FY
please advise me
thanks in advance.

In report painter you can select variouselements based on which the data will be pulled. I haven't seen any report painter with two header lines and don't think report painter allows that. But for your requirement I believe you can select the periods in the header line itself.

Inventory cycle count report

Hi
We need to implement inventory cycle count report . Is there a standard business content data source for this ?
Thanks and Regards
Arun

Sorry I never responded. It's really just a matter of what you need to report on. ISEG has all the basic information you need like plant, material, sloc, etc... so the other tables invovled is really a case by case type of thing. I can't think of much else you would really need for generic cycle count reporting.
Also, the previous post is a good method depending on your needs. If showing difference postings and whatnot is suitable, then go with the movement type. But if you need to dig deeper into it by showing system/counted quantities as well as the difference, then the custom extractor would be the way to go. For me, I did inventory accuracy/cycle counting type of reporting that needed to consider the actual quantities, as a difference of 2 units on an inventory of 100,000 units is a lot different that 2 units difference on a balance of 100 units. But that was just my case is all.
Hope this helps.
Thanks

Creating Aging Report and Counting report

Hi Everyone!
Greetings to all of you,
I would like to know where can i find some resources or step by step insruction to create aging report and also counting reports (i.e No of PO created for a period).
If any of you have any information related to the above reporting requirement please do pass it to me
Your information on the above issue are highly appreciated
Thanking you in advance
Thank you
rgds
Saravanan Ramasamy

Hi Saravanan,
Go through these links.
Ageing analysis
Re: Stock Ageing (Qty & Value)
No value could be determined for variable 0P_KEYD2
Regards,
BW IGA

Is it a good idea to use ABAP objects for reports?

Hello Experts,
Is it a good idea to use ABAP objects instead of the traditional ABAP for coding reports?

Hi,
Go throught Document it will Give you eight Reasons why OOABAP Should be used.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/37c5db90-0201-0010-3a9b-d0a5288f3c15
Must go through
Regards,
Gurpreet

ABAP Statistics BI Reporting via CCMSBISETUP

Hello together,
I am using ABAP-Statistics BI-Reporting after running CCMSBISETUP on Solution Manager 7.0 EHP1(BI Content 7.04, PI Basis 7.01 Level 0004). Primarily I want to make analyses based on the Infoprovider 0CCMSATIM (time profile).
During executing Queries of the InfoProvider 0CCMSATIM (time profile) I detected, that the datasets, which are collected from a satellite system, are incomplete. After a drilldown by the attribute "time range" i found out, that some time ranges are missing completely (e.g. 10-11a.m.), some contain incomplete data (e.g.9-10 a.m.) and some are correct (e.g. 0-9 a.m.). TA ST03N on the Satellite system itself contains the correct data and confirmed that presumtion. It seems that the extractor is not working properly at some times. This phenomenon occurs very irregularly. Apparently the error occurs most often when the satellite system is very busy and used to capacity.
The Satellite Systems seem to be configured correct in CEN (RZ21).
The datasets of the Myself-System (Solution Manger) in the InfoCube are correct too.
Does anyone know this problem and how to solve it?
Thank you.

hi
pls check this "The data load process ran without error messages, however no data or only a small amount of data has arrived in the data targets" under listed problems
[http://help.sap.com/erp2005_ehp_02_sp/helpdata/en/46/62b13c5d8c0ad2e10000000a11466f/content.htm|http://help.sap.com/erp2005_ehp_02_sp/helpdata/en/46/62b13c5d8c0ad2e10000000a11466f/content.htm]
hope this helps
Jansi

Hr abap head counting report

Similar Messages

Maybe you are looking for