HR ABAP How to Write BDC For Infotype 0586

Hi Experts
Can Any One tell me how to write BDC for Infotype 0586 and also 585.
If we enter into the maintaining Screen, the lines in the Screen will dynamically changing depending on the values.
When I am doing recording , If I press page down after entering values in top lines, the lines are changing and the records are not updating Correctly.
I need to write BDC to Create Change.
Can any one please help me in this regard?
Thanks in Advance.
Regards
Avinash.

http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
http://www.google.co.in/search?hl=en&q=SAPBDCtable+control&meta=
http://www.sap-basis-abap.com/abap/handling-table-control-in-bdc.htm
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm

Similar Messages

How to write BDC for tcode F-32

Hi Experts,
How to write BDC for tcode F-32 .
is it possible i recorded in SHDB BUT IF I AM DOING IT'S COMING WRONG .
plz guide me sir.
regars,
Hari
Edited by: hari311 on Oct 27, 2009 9:22 AM

There might be that when u provide the data in the selction screen of F-32 and press process open items some custom program might be attached to it and gets executed...
chek it out..
if so..
pass the bdcdata of the second screen into a memory id
export t_bdcdata into v_memid.
in that custoom report jus import this..
then fill the t_bdcdata with the header information and call the transcation f-32..
Edited by: imran khan on Oct 27, 2009 9:35 AM

How to write BDC for KP06

Hi,
How to write BDC, for Tcode KP06, How to handle the table control in that Tcode.
or any other way to upload data for this Tcode.
Regards
Manohar

Hi,
check the sample code for transaction ME51 and ME21.
PARAMETERS:
p_fname TYPE ibipparms-path.
*" Data declarations...................................................
Work variables                                                      *
DATA:
fs_bdc TYPE bdcdata,
fs_msg TYPE bdcmsgcoll.
Internal table to hold bdc data                                     *
DATA:
     t_bdc LIKE
STANDARD TABLE
        OF fs_bdc.
Internal table to hold bdcmessage data                              *
DATA:
     t_msg LIKE
STANDARD TABLE
        OF fs_msg.
DATA:
w_string(50) TYPE c,
w_string1(19) TYPE c,
w_message(72) TYPE c,
w_num         TYPE i VALUE 1,
w_num1        TYPE i.
*" Type declarations...................................................
Type declaration of the structure to hold header data              *
DATA:
BEGIN OF t_header OCCURS 0,
    ftype      TYPE c,
    doctype(10) TYPE c,
    acctcat(4) TYPE c,
    date(10)    TYPE c,
    plant(4)   TYPE n,
    text(10)   TYPE c,
    qty(5)     TYPE n,
    units(5)   TYPE c,
    pgrp(3)    TYPE n,
    mgrp(3)    TYPE n,
    price(2)   TYPE n,
   gacct(6)   TYPE n,
    cost(4)    TYPE n,
END OF t_header.
                      START-OF-SELECTION EVENT                      *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
CALL FUNCTION 'F4_FILENAME'
   EXPORTING
     program_name        = syst-cprog
DYNPRO_NUMBER       = SYST-DYNNR
FIELD_NAME          = ' '
   IMPORTING
     file_name           = p_fname
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                      = 'c:\temp\item2.txt'
FILETYPE                      = 'ASC'
     has_field_separator           = 'X'
    TABLES
      data_tab                      = t_header
   EXCEPTIONS
     file_open_error               = 1
     file_read_error               = 2
     no_batch                      = 3
     gui_refuse_filetransfer       = 4
     invalid_type                  = 5
     no_authority                  = 6
     unknown_error                 = 7
     bad_data_format               = 8
     header_not_allowed            = 9
     separator_not_allowed         = 10
     header_too_long               = 11
     unknown_dp_error              = 12
     access_denied                 = 13
     dp_out_of_memory              = 14
     disk_full                     = 15
     dp_timeout                    = 16
     OTHERS                        = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.                                 " IF SY-SUBRC <> 0
LOOP AT t_header WHERE ftype = 'H'..
    CLEAR fs_msg.
    IF t_header-ftype = 'H'.
      PERFORM bdc_program USING 'SAPMM06B' '0100'.
      PERFORM bdc_field   USING 'eban-BSART' t_header-doctype.
      PERFORM bdc_field   USING 'eban-KNTTP' t_header-acctcat.
      PERFORM bdc_field   USING 'RM06B-EEIND' t_header-date.
      PERFORM bdc_field   USING 'eban-WERKS' t_header-plant.
      PERFORM bdc_field   USING 'BDC_OKCODE' 'AB'.
    ENDIF.
   IF t_header-ftype = 'I'.
    LOOP AT t_header WHERE ftype = 'I'.
      PERFORM bdc_program USING 'SAPMM06B' '0106'.
      w_string = 'EBAN-TXZ01(01)'.
      w_string+12(1) = w_num.
      PERFORM bdc_field   USING w_string t_header-text.
      w_string = 'EBAN-MENGE(01)'.
      w_string+12(1) = w_num.
      PERFORM bdc_field   USING w_string t_header-qty.
      w_string = 'EBAN-MEINS(01)'.
      w_string+12(1) = w_num.
      PERFORM bdc_field   USING w_string t_header-units.
      w_string = 'EBAN-EKGRP(01)'.
      w_string+12(1) = w_num.
      PERFORM bdc_field   USING w_string t_header-pgrp.
      w_string = 'EBAN-MATKL(01)'.
      w_string+12(1) = w_num.
      PERFORM bdc_field   USING w_string t_header-mgrp.
      PERFORM bdc_field   USING 'BDC_OKCODE' '=KN'.
      w_num = w_num + 1.
      PERFORM bdc_program USING 'SAPMM06B' '0102'.
      PERFORM bdc_field   USING 'EBAN-preis' t_header-price.
      PERFORM bdc_field   USING 'BDC_OKCODE' '=KN'.
      PERFORM bdc_program USING 'SAPMM06B' '0505'.
      PERFORM bdc_field   USING 'BDC_OKCODE' '=KWE'.
      PERFORM bdc_program USING 'SAPlkacb' '0002'.
   PERFORM bdc_field   USING 'EBAN-sakto' t_header-gacct.
      PERFORM bdc_field   USING 'cobl-kostl' t_header-cost.
      PERFORM bdc_field   USING 'BDC_OKCODE' '=ENTE'.
     PERFORM bdc_program USING 'SAPMM06B' '0102'.
     PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
         ENDIF.
    ENDLOOP.
ENDLOOP.
PERFORM bdc_program USING 'SAPMM06B' '0106'.
PERFORM bdc_field   USING 'BDC_OKCODE' 'BU'.
     PERFORM BDC_PROGRAM USING 'SAPMM06E' '100'.
*PERFORM BDC_FIELD USING 'BDC_OKCODE' 'BACK'.
CALL TRANSACTION 'ME51' USING t_bdc MODE 'N' MESSAGES INTO t_msg.
LOOP AT t_msg INTO fs_msg.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        id        = fs_msg-msgid
        lang      = sy-langu
        no        = fs_msg-msgnr
        v1        = fs_msg-msgv1
        v2        = fs_msg-msgv2
        v3        = fs_msg-msgv3
        v4        = fs_msg-msgv4
      IMPORTING
        msg       = w_message
      EXCEPTIONS
        not_found = 1
        OTHERS    = 2.
       WRITE:
         / w_message.
ENDLOOP.
CLEAR t_bdc[].
PERFORM bdc_program USING 'SAPMM06E' '0100'.
PERFORM bdc_field   USING 'EKKO-LIFNR' '1000'.
PERFORM bdc_field   USING 'EKKO-EKORG' '1000'.
PERFORM bdc_field   USING 'EKKO-EKGRP' '100'.
PERFORM bdc_field   USING 'BDC_OKCODE' 'BS'.
PERFORM bdc_program USING 'SAPMM06E' '0501'.
PERFORM bdc_field   USING 'EKET-BANFN' fs_msg-msgv1.
PERFORM bdc_field   USING 'BDC_OKCODE' '=KOPF'.
PERFORM bdc_program USING 'SAPMM06E' '0125'.
PERFORM bdc_field   USING 'BDC_OKCODE' 'MALL'.
PERFORM bdc_program USING 'SAPMM06E' '0125'.
PERFORM bdc_field   USING 'BDC_OKCODE' 'REFH'.
PERFORM bdc_program USING 'SAPMM06E' '0504'.
PERFORM bdc_field   USING 'BDC_OKCODE' '=ENTE'.
PERFORM bdc_program USING 'SAPMM06E' '0111'.
PERFORM bdc_field   USING 'BDC_OKCODE' '=NEXP'.
*perform bdc_program using 'SAPLSPO1' '0300'.
*PERFORM BDC_FIELD   USING 'BDC_OKCODE' 'YES'.
PERFORM bdc_program USING 'SAPMM06E' '0504'.
PERFORM bdc_field   USING 'BDC_OKCODE' '=ENTE'.
PERFORM bdc_program USING 'SAPMM06E' '0111'.
PERFORM bdc_field   USING 'BDC_OKCODE' '=NEXP'.
*perform bdc_program using 'SAPMM06E' '0504'.
*PERFORM BDC_FIELD   USING 'BDC_OKCODE' '=ENTE'.
*perform bdc_program using 'SAPMM06E' '0111'.
*PERFORM BDC_FIELD   USING 'BDC_OKCODE' '=NEXP'.
perform bdc_program using 'SAPMM06E' '0504'.
*PERFORM BDC_FIELD   USING 'BDC_OKCODE' '=ENTE'.
perform bdc_program using 'SAPMM06E' '0504'.
*PERFORM BDC_FIELD   USING 'BDC_OKCODE' '=ENTE'.
*perform bdc_program using 'SAPMM06E' '0111'.
*PERFORM BDC_FIELD   USING 'BDC_OKCODE' '=NEXP'.
PERFORM bdc_program USING 'SAPMM06E' '0120'.
PERFORM bdc_field   USING 'BDC_OKCODE' 'BU'.
CALL TRANSACTION 'ME21' USING t_bdc MODE 'N' MESSAGES INTO t_msg
LOOP AT t_msg INTO fs_msg.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        id        = fs_msg-msgid
        lang      = sy-langu
        no        = fs_msg-msgnr
        v1        = fs_msg-msgv1
        v2        = fs_msg-msgv2
        v3        = fs_msg-msgv3
        v4        = fs_msg-msgv4
      IMPORTING
        msg       = w_message
      EXCEPTIONS
        not_found = 1
        OTHERS    = 2.
       WRITE:
         / W_message.
ENDLOOP.                             " LOOP T_MSG
CLEAR t_bdc[].
PERFORM bdc_program USING 'SAPMM06E' '0105'.
PERFORM bdc_field   USING 'RM06E-BSTNR' fs_msg-msgv2.
PERFORM bdc_field   USING 'BDC_OKCODE' 'AB'.
w_num1 = w_num - 1.
DO w_num1 TIMES.
    w_string1 = 'RM06E-TCSELFLAG(00)'.
    w_string1+17(1) = w_num1.
    PERFORM bdc_program USING 'SAPMM06E' '0120'.
    PERFORM bdc_field   USING w_string1 'X'.
    PERFORM bdc_field   USING 'BDC_OKCODE' 'DL'.
    w_num1 = w_num1 - 1.
ENDDO.                               " DO W_NUM1
PERFORM bdc_program USING 'SAPMM06E' '0120'.
PERFORM bdc_field   USING 'BDC_OKCODE' 'BU'.
CALL TRANSACTION 'ME22' USING t_bdc MODE 'A' MESSAGES INTO t_msg.
LOOP AT t_msg INTO fs_msg.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        id        = fs_msg-msgid
        lang      = sy-langu
        no        = fs_msg-msgnr
        v1        = fs_msg-msgv1
        v2        = fs_msg-msgv2
        v3        = fs_msg-msgv3
        v4        = fs_msg-msgv4
      IMPORTING
        msg       = w_message
      EXCEPTIONS
        not_found = 1
        OTHERS    = 2.
    WRITE:
      / w_message.
ENDLOOP.                             " LOOP T_MSG
*&      Form bdc_program
This subroutine gives screenname and screen number                 *
There are no interface parameters to be passed to this subroutine. *
FORM bdc_program USING    value(p_screen)
                           value(p_num).
CLEAR fs_bdc.
fs_bdc-program = p_screen.
fs_bdc-dynpro = p_num.
fs_bdc-dynbegin = 'X'.
APPEND fs_bdc TO t_bdc.
ENDFORM.                               " FORM BDC_PROGRAM
*&      Form BDC_FIELD
This subroutine gives the field name and field value               *
There are no interface parameters to be passed to this subroutine. *
FORM bdc_field USING    value(p_name)
                         value(p_value).
CLEAR fs_bdc.
fs_bdc-fnam = p_name.
fs_bdc-fval = p_value.
APPEND fs_bdc TO t_bdc.
ENDFORM.                               " FORM BDC_FIELD
Regards,
jaya

Bdc for infotype 581

hi
I have to do bdc for infotype 581. The manual senario for this is after entering data in 581 and if i click save button it will save the data and it will go to infotype 8 screen. There it will populate the hra and value in wagetype and amount automatically. i will save that too.
but when i did this in bdc, after entering the data in 581 and clicking the save button it is not going to infotype 8 screen.
how can i store that hra in infotype 8 for that particular PERNR.
pls send the solutions for this
thanks in advance to all who will help

Hi,
When you are using BDC it will skip infotype 8. You should again upload infotype 8 for HRA.
Regards,
Ramu N.

How to handle bdc for more than one transaction?

how to handle bdc for more than one transaction?

Hi srk,
I am providing you with some references below. Hope this prove to be helpful to you.
Method 1:
Use one BDC_OPEN_GROUP
Multiple BDC_INSERT
One BDC_CLOSE_GROUP.
Call function BDC_OPENGROUP.
Build BDC data and call lBDC_INSERT for transaction 1
Build BDC data and call lBDC_INSERT for transaction 2
Build BDC data and call lBDC_INSERT for transaction 3
paas the tcodes to bdc_insert.
call function BDC_CLOSE_GROUP.
Also check this out:
Here we need to record 2 transactions (shdb).
Once completion of the recording. Populate the data into input internal table .
Loop the internal table and process the 2 transactions
like
1. BDC_OPEN_GROUP
2. LOOP AT ITAB
a. Populate first transaction recording data
and pass transaction to the BDC_INSERT_GROUP.
BDC_INSERT_GROUP.
b. Populate second transaction recording data
and pass transaction to the BDC_INSERT_GROUP.
BDC_INSERT_GROUP.
ENDLOOP.
3. BDC_CLOSE_GROUP
the above info can be found at : How to use 2 transactions in BDC?
Also check this out:
Suppose u have created recordings for transactions 'MM01' 'XK01' and 'VA01'.
Then do this:
bdc_open_group.
after this we have to fill the bdcdata structure for one transaction.here 'MM01'.
bdc_insert.
refresh bdcdata.
after this we have to fill the bdcdata structure for one transaction.here 'xk01'.
bdc_insert .
refresh bdcdata.
after this we have to fill the bdcdata structure for one transaction.here 'va01'.
bdc_insert.
bdc_close_group.
Hope these are useful to you.
Please reward if any of the above are useful.
Regards,
Kalyan

How to write comments for a class

hi
how to write comments for a class

I'm reeling with incredulity, and as such am unable to do anything except just post some code
// this is a single line comment
/* this is a multiline comment.
it can be spread over as many lines as you
want */Or are you asking about how to decide what the content should be?

Bdc for infotype 583

Hi,
I am trying to record a BDC for Infotype 0583 .
During manual creation , i am taken to the Infortpe 8 screen from the infotype 583 screen.
While recording through SHDB this is not happening. I am not taken to the Infotype 8 screen at all. The recording stops at the infotyp 0583 screen itself ,after I press the save buton.
Need some help guys.....
Regards,
Salish

check this sample program
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action&pageid=13160
Regards
prabhu

How to Make BDC for transcation KKS1

Hi dear,
can any one tell me that how to make BDC for KKS1.
because i have recorded the BDC and converted into the program logic than it is showing the first window but not showing the window with ALV and futher more. So what coding i have to apply.
Please help.
Siddarth Jain

Hi,
U can record the flow in using SHDB transaction recorder.
U can record and it will generate the program, u can copy and paste the part of the code that is generated, in ur ALV report. this will call the transaction.
Do as follows:
<b>SHDB > New Recording > Specify Recording Name YTEST > Transaction code KKS1 > STRAT RECORDING BUTTON></b>
then speciy the vales u want to give to run the transaction. U can save and come back as soon as u reach the screen when u want to stop it.
EG:
Declare a messtab
DATA: i_bdcdata TYPE STANDARD TABLE OF bdcdata,
* Internal table to hold BDC messages
i_messtab TYPE STANDARD TABLE OF bdcmsgcoll
* Work area to hold bdcdata value
DATA: w_bdcdata TYPE bdcdata,
* Work area to hold BDC messages
w_messtab TYPE bdcmsgcoll.
CONSTANTS : c_e type bdcmsgcoll-msgtyp value 'E', "E
c_a type bdcmsgcoll-msgtyp value 'A', "A
nodata type c value '/'. "/
perform f1000_bdc_mm03 using lv_matnr lv_werks.
FORM f1000_bdc_mm03 USING P_LV_MATNR
P_LV_WERKS.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
p_lv_matnr.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(15)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(15)'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '0080'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-WERKS'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'RMMG1-WERKS'
p_lv_werks.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'BDC_OKCODE'
'=ZU01'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_dynpro using 'SAPLMGMM' '4300'.
perform bdc_field using 'BDC_OKCODE'
'=ZU08'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_dynpro using 'SAPLMGMM' '4110'.
perform bdc_field using 'BDC_OKCODE'
'=GESV'.
*perform bdc_field using 'BDC_CURSOR'
* 'RMMG1-MATNR'.
call transaction c_transaction_call_MM03 using i_bdcdata MODE 'N'MESSAGES INTO i_messtab.
<b>Kindly close the previous threads opened by u.</b>
Message was edited by: Judith Jessie Selvi

Does anybody know how to write GUI for J2ME?

Does anybody know how to write GUI for J2ME?
Thanks!

Hi..! I don't know exactly... it's a good question. I refered something. U visit below URL's.
http://www.java-pro.com/upload/free/features/javapro/2000/13iss00/rg0013/rg0013.asp
http://developer.java.sun.com/developer/technicalArticles/wireless/midpui/

How to write code for page up and page down buttons on alv screen?

Hi,
Page up and page down buttons are not working in general alv report. Thease buttons are in disable mode. But is stnd. transactions (tcode : fbl5n) these are enabled and working properly, but we can't debug this with /h
How to write code for page up and page down buttons on alv screen?

Poonam,
On doing the screen debugging it took me over to    Include LSTXWFCC ,kindly check the below code.
module cc_display.
fcode = sy-ucomm(4).
case sy-ucomm(4).
    when 'P--'.
      perform cc_firstpage.
    when 'P-'.
      perform cc_prevpage.
    when 'P+'.
      perform cc_nextpage.
    when 'P++'.
      perform cc_lastpage.
    when 'EX--'.
      perform cc_firstcopy.
    when 'EX-'.
      perform cc_prevcopy.
    when 'EX+'.
      perform cc_nextcopy.
    when 'EX++'.
      perform cc_lastcopy.
I guess it can give you some lead.
K.Kiran.

How to write program for handling script ?

In script i have 2 pages.
In first page i have constant windows and variable windows.
In second page i have main window.
How to write program for this?

Hi
You need to write a driver program. You need to use open form, then write_form to write data into various windows and then close_form to close.
As you don't want main window in the first page first try out just by having the window in the second page; i guess system will take care of it. As all other windows filled and if u start writing data in the main it'll go for next page.
If doesn't work have the window on the first page with the least hight and write a command
IF &SYST-PAGE& EQ 1
    NEXT-PAGE.
ENDIF.
Then in the second page you can have the main window hight as per your requirement.
Here is an example
(1) Get customer data
TABLES: scustom, sbook, spfli.
DATA: bookings like sbook...
select * from...
(2) Open form
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      DEVICE = 'PRINTER'
      FORM = 'S_EXAMPLE_1'
      DIALOG = 'X'
    EXCEPTIONS
      others = 1
(3) Print table heading
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      ELEMENT = 'HEADING'
      TYPE = 'TOP'
      WINDOW = 'MAIN'
      FUNCTION = 'SET'
(4) Print customer bookings
LOOP AT bookings WHERE
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        ELEMENT = 'BOOKING'
        TYPE = 'BODY'
        WINDOW = 'MAIN'
ENDLOOP
(5) Close form
CALL FUNCTION 'CLOSE_FORM'
Regards
Surya.

How to write Validations for Sample Data??

Hi Frnds,
I want to know how to write validations for sample oracle data?? Can anyone explain anyone clearly??
Regards,
Raj

Hi shushma,
Simply put a check that:
If(wdContext.current<YOUR_NODE>Element().get<YOUR_ATTRIBUTE_NAME> !=null){
else{
// Show the error messages
//Displaying the error message is very easy.
//You can report exception using the message manager API's. You will get this easily on SDN.
I hope this helps! if you need ay further help please let me know.
Thanks and Regards,
Pravesh

How to write GUI for J2ME?

Does anybody know how to write GUI for J2ME?
is there any reference books, web sites, etc?
Thank you!

Thank you!
i will take a look.

How to write API for web cam?

who knows how to write API for web cam?

if you mean capture from the cam try JMF I've done it a million times
salut

How to write procedure for creating a row

Hi
How to write procedure for creating a new row in data table when button clicked.

Hi
I am able to create a row.by writing a method in Application module class.
method for creating a row in fin_years view:
public void createRow() {
Row newRow = (Row)getFinYearsView1().createRow();
newRow.setNewRowState(Row.STATUS_INITIALIZED);
//get instance of the above created view object
ViewObjectImpl vo=getFinYearsView1();
// to insert row at the end of the table
vo.insertRowAtRangeIndex(vo.getRangeSize()-1, (Row)newRow);
System.out.println(getFinYearsView1().getCurrentRowIndex());
but it doest not create row at last in the data table.Instead it insert row in middle..

HR ABAP How to Write BDC For Infotype 0586

Similar Messages

Maybe you are looking for