HR: Changing Address type in IT0006

Hey All,
      We have a lot of corrupted data in Infotype 6, due to our previous interface. I am trying to write a program using HR_INFOTYPE_OPERATION to fix these errors. One of the fix needed is to change the Address type from BLANK(current) to 1. I am trying to change fields SUBTY and ANSSA to 1.
I wrote a report to do this change, but it throws me a error saying "Lock/Key Change not permitted (Time Constraint 1)". I am locking and unlocking the employee before and after the HR_INFOTYPE_OPERATION  call using FUNCTION 'ENQUEUE_EPPRELE'.
How do i resolve this error? Is ther any other way to change the address type. PA 30 does not allow changing the address type.
Any suggestions?
Thanks.

Hello Aparna,
                    Check this link related to your problem :
http://sap.ittoolbox.com/groups/technical-functional/sap-hr/basic-pay-update-1007501?cv=expanded#
Thanks,
Greetson

Similar Messages

  • Change Address in SmartForms

    Hai,
    i have a doubt in smartforms   'if u want to change the address in smartforms what can i do? is there any event or not.
    plz tell me.
    Edited by: Alvaro Tejada Galindo on Apr 2, 2008 6:10 PM

    hi reddy,
    It seems like you are using an address node, and not a free-form text node with explicit address fields, which was the way things used to be done in SAPscript. This is good. The key strength in address nodes is the standardized way they rely upon address numbers and a few other key pieces of information to format addresses properly and consistently. However, a minor negative is that we lose some of the fine-tuned control available to us with explicit address formatting from SAPscript (e.g. deliberately suppressing certain lines).
    Here is a simple test to simulate how a vendor address will look on output:
    Go to vendor display (transaction FK03)
    Select a vendor
    Click on the address option under 'General data' and press enter
    On the next screen, click the 'print preview' icon
    The address which appears should resemble the one you see on your Smart Form output. From here you can click on the 'change parameters' icon to tweak the settings. One of these settings, maximum number of lines, is something which you have control over in your Smart Form's address node. Perhaps reducing this number will squeeze out the blank lines you currently see. Once you determine the proper value, update it within your form's address node. If the address appears fine in vendor display, but not on your form, double-check the address node to see if something else might be wrong with it (e.g. sending country).
    regards
    karthik
    <REMOVED BY MODERATOR>
    Incidentally, the 'print preview' and 'change parameters' icons are available for other address types in SAP as well. They provide a quick diagnostic to determine if addresses are printing correctly on a form
    Edited by: Alvaro Tejada Galindo on Apr 2, 2008 6:10 PM

  • Change VDC type on n7k sup1

    Hi.
    I have a pair of Nexus 7010 with sup1 running 6.2(8)
    There is default VDC only:
    # sh vdc detail
    Switchwide mode is m1 f1 m1xl f2 m2xl f2e f3
    vdc id: 1
    vdc name: nex7010-12
    vdc state: active
    vdc mac address: 40:55:39:23:1e:c1
    vdc ha policy: RELOAD
    vdc dual-sup ha policy: SWITCHOVER
    vdc boot Order: 1
    vdc create time: Tue Dec 20 11:23:37 2011
    vdc reload count: 0
    vdc uptime: 989 day(s), 22 hour(s), 10 minute(s), 34 second(s)
    vdc restart count: 0
    vdc type: Ethernet
    vdc supported linecards: m1 f1 m1xl m2xl
    I want to add N7K-F248XP-25E line card. So as I understand I should enter
    (config)# vdc nex7010-11 id 1
    (config-vdc)# limit-resource module-type m1 f1 m1xl m2xl f2e
    And then insert line card. Is this right?
    So my questions. Is this operation disruptive to traffic forwarding? Do I lost allocated interface and/or limit-resources after change VDC type and need to retype them again?

    Hi insharie,
    thanks for fast answer :)
    My config:
     Model        
     N7K-M148GT-11
     N7K-M148GT-11
     N7K-M148GT-11
     N7K-M148GT-11
     N7K-SUP1     
     N7K-SUP1     
     N7K-M108X2-12L
     N7K-M108X2-12L
     N7K-F132XP-15
    So there is no F2 line cards.
    I want to add F2e - N7K-F248XP-25E line card.
    In "Cisco Nexus 7000 Series NX-OS VDC Configuration Guide":
    "Beginning with Cisco NX-OS Release 6.2(2), F2e module type can exist with M1, M1XL, and M2XL module types in the same VDC."
    And as I understand F2e will be working in Proxy Mode 
    "When you enter the limit-resource module-type command and it changes the F2e mode between the old VDC type and the new VDC type, you are prompted to enter the rebind interface command"
    From the table "Table 7 VDC Types Impacted By F2e Proxy Mode" I do not see my case
    Old VDC: M1,F1 --> New VDC: M1,F1,F2e
    And can not figure out the impact.

  • Adding a country to the Change Address Format menu

    I have someone who I wish to write to in Turkmenistan, so I'm using Address Book to create a label for him. However, Turkmenistan (like many other countries) is not listed on the menu of countries you can change the Address Format to on the Edit/Change Address Format submenu, when you click on the address type (home, work, etc).
    Is there a way to add countries, or perhaps to specify Other/Not Listed and just use a single blank field to type in the address? When I try and enter a Turkmenistan address according to the USA label format, it looks misaligned and has a gap between the second to last and last lines of the address.
    I've searched the forums and all the documentation already, but I can find nothing on this. Please help if you can!

    This is what I was doing initially, but for some strange reason, when I paste the Cyrillic in from another document (as I cannot type it myself), the second line of the address gets shifted all the way to the left, outside of the actual editing field. I can't edit it or make it align properly at all, and it looks that way even on the saved Card. I think on the label, it looks fine, but I can't delete the City, State fields, so there's a gap between the major bulk of the address and the country.
    It would be nice if there were a way to say what fields you want on a card- for example, drag and drop Street, or Address Line 1, Address Line 2, and delete fields you don't want- like State/Province. (This would negate the need of needing to pick a country's particular format, because you could rearrange it as you pleased, or as was proper for wherever you were writing). I'm just wondering if there's some way to do something to help me-- maybe change something in one of the plist files, or AppleScript? (Though I'd rather an easier solution, if I can get it done, that would be great.)

  • How to change nat type 3 to nat type 2 for Plastation 4?

    how to change nat type 3 to nat type 2 for adaptation 4? i am havng a complicated time with this im'm just trying to play online and been at it fotr 3 days i have tried about everuyhing n portforwarding.com i have a Cisco Linksys E1000

    Hi ceasar14. I actually found some steps (from a source) that worked for me. I'm not sure if it will work for you. Here are the steps:
    1. Get the MAC address of your PS3. To find your MAC address simply go to
    Settings > System Settings > System Information
    2. Assign a static IP address on your PS3.
    3. Access your router's user interface to open a few ports. 
    4. Under Applications and Gaming > Port Range Forwarding, open the following ports:
    TCP: 80, 443, 5223
    UDP: 3478, 3479, 3658
    5. Once this is done, powercycle your PS3 and the router.
    6. Run a connection test and check if it is now on NAT2.
    Good luck.

  • HOW TO CHANGE ACCOUNT TYPE FROM IMAP TO POP

    HOW TO CHANGE ACCOUNT TYPE IN YOUR EMAIL FROM IMAP TO POP

    You can't.  You need to create a new account in Mail.
    Note, when setting up a new account (after clicking the '+' in the Accounts proeference), enter an invalid email address or option click the Continue button to be given the choice of account type (POP or IMAP).

  • Cannot change paper type from Android ePrint app when printing photos

    I have the ePrint mobile app installed on my Android phone (Samsung Galaxy S4) and have a Photosmart 7520 printer at home. When I'm at home, I can see the same printer listed twice from ePrint mobile app on my phone, once via ePrint (with the printer's email address shown) and the other via wireless (with the printer's IP address shown). If I were to print a photo from ePrint mobile app, if I select my printer via wireless connection, I can see the option to change the paper type, i.e. either the plain paper or photo paper; but if I select the same printer via ePrint, the option to change paper type no longer appears in the app. When I'm on the go, I can only see my printer via ePrint and I cannot print a photo on plain paper due to the absence of the "paper type" option. However, if I were to print a document via ePrint mobile app, the option to change paper type does show up. So to sum it up: 1) Print photo from ePrint mobile app via wireless -- the "paper type" option is present;2) Print photo from ePrint mobile app via ePrint -- the "paper type" option is absent;2) Print document from ePrint mobile app via ePrint -- the "paper type" option is present. This cannot be by design, correct? Thanks.  

    Hi phibei!
    Thank you for posting.
    I have done some research on your post.
    You are correct, this is by design. This is due to the communication method being used. When using the ePrint app via ePrint it's sending the information via an email and limits the options available.
    Happytohelp01

  • PL/SQL Network Address Type Functions

    Hi,
    I'm wondering if anyone knows of a PL/SQL package(s) that provides similar capabilities as the following postgreSQL network address type functions:
    http://www.sql.org/sql-database/postgresql/manual/functions-net.html
    I don't see anything in the standard Oracle 10g packages, so I'm wondering if anyone else has dealt with this problem and posted the package.
    Thanks,
    - Greg.

    I think the easiest way of getting some of this functionality would be to write a PL/SQL wrapper to a Java Stored Procedure that implements calls to the Java InetAddress class. It doesn't haven't the full set of operators but I'm not sure what 'less than' actually means in the context of an IP address . If you really need them you could always extend the InetAddress class to implement such tests.
    Cheers, APC

  • Change material type

    When i am changing the material type i am getting this msg. In Po items were deleted.
    Change Material Type
    The material type cannot be changed.
    The reasons for this are:
    Valuated stock exists (see valuation areas below).
    However, account determination for the two material types differs.
    (different account category reference or no valuation data defined)
        Valuation area
        1030
    No open purchase order are there.

    hi
    plz check mmbe for the stock
    check for the open PR and PO in ME5A and me2m
    then try Change material type
    Material Type can be changed using transaction MMAM
    Menu: - Logistics > Material Management > Material Master > Material > Change Material Type
    u can also use MMZ2 to change material type and ind sec
    Refer following link for the same;
    http://www.sap123.com/showthread.php?t=21
    regards
    kunal

  • I activated my ipad, used iCloud & Find my iphone with Apple ID named: A@.... But now I've changed address of Apple ID from A@... to the new one: B@... Which Apple ID will be asked to re-activate 7.0.4 ipad - A or B?

    Hello everybody!
    I'm using ipad mini and the iOS is 7.0.4. I used an Apple ID (called: A), and I activated my ipad, used iCloud & Find my iphone with this A account. But now I've changed address of Apple ID from A@.... to the new one: B@.... (just changed email address of Apple ID, not create a new ID), and then I signed out iCloud, old Apple ID, etc... on my ipad and signed in with new id B@.... Everythings seem OK, I can sign in/out iCould, turn on/turn off Find my iphone as well with the new one (B@...)
    But I still have a question (and still confusing with it): What will happend when I restored my ipad? I mean my iOS is 7, so which Apple ID will be asked to re-activate my ipad after I restore it, old id A@.... (this one cannot be used now) or the new one B@...., please?
    Thank you very much for your helpful informations!

    If you've succesfully changed the ID for iCloud and Find my phone, it will be your new ID you use if you need to restore it.

  • Is there a way to change the type of hash for passwords in active direcroty?

    I would like to know what type of hash used for active directory passwords and if there is a way to change the type of hash.

    Hi,
    Windows generates and stores user account passwords by using two different password representations, generally known as "hashes." When you set or change the password for a user account to a password that contains fewer than 15 characters, Windows generates
    both a LAN Manager hash (LM hash) and a Windows NT hash (NT hash) of the password.
    You can configure the type to only store the stronger NT hash of your password.
    How to prevent Windows from storing a LAN manager hash of your password in Active Directory and local SAM databases
    http://support.microsoft.com/kb/299656/en-us
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How can I change the type of column in matrix

    I want to change the type of column in matrix to it_LINKED_BUTTON, so it can show the orange arrow
    I added the column throw marketing documents (rows)
    It's seems the default column type  is it_Edit
    is there a way of changing the column type
    i tried the below code, but it did not work because the type property in a matrix column is readonly
    mtx.Columns.Item(0).Type = SAPbouiCOM.BoFormItemTypes.it_LINKED_BUTTON
    sincerely yours
    Riade Asleh

    i don't want to add a new column
    i want to change the column type of existing column in matrix, becuase it's bind to a field
    beside that, i can not add column , if the matrix has rows in it
    sincerely yours
    Riade Asleh

  • Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Hi Memalyn
    Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
    My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
    If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
    Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
    Let us know what you find out, and if you manage to get your space back.
    Matt

  • Badi for changing Stock type in MIGO transaction

    Hello ALL,
    IS there any BADI or EXIT for changing stock type in MIGO when we are doing GR against PO then we need to change the Stock type  to Unrestricted stock.
    Please let me know.Awarded if useful.
    Regards

    hi,
    Look into the BADI     MB_MIGO_BADI.
    or
    Exits:
    MBCF0009 Filling the storage location field
    MBCF0005 Material document item for goods receipt/issue slip
    MBCF0006 Customer function for WBS element
    MBCF0007 Customer function exit: Updating a reservation
    MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
    MBCF0002 Customer function exit: Segment text in material doc. item
    MBCF0011 Read from RESB and RKPF for print list in MB26
    Sirish

  • Changing data types of  fields in structures

    Hello,
       Currently we are working for upgrade to ECC 6.0 .
       In some transactions we are using BAPI_MATERIAL_SAVEDATA to create material.
      We have some additional fields in MARA and MARC table , which we fill using BAPI_TE_MARA and BAPI_TE_MARC structures.
        In these structures we have different data types for fields earlier in 4.6C
    Now this function module is only working if we change  data types of  fields in these structures only to char type. It is going for dump , if we maintain any other data type.
      Could any body tell me why should we change for char data type ?
    Regards,
      SATYA

    Hi,
    Check enhancement category (Extras --> Enhancement Category) for structures before enhancement. For example, for BAPI_TE_MARA structure, enhancement category is given as character type or numeric type. That means you can add the fields of data type only C and N. No other data types are allowed. If you select as not classified then you can add any data type. This option plays important role while enhancement.
    Regards,
    Prasanth

Maybe you are looking for