HR Data Migration Tool

Please suggest what is the best migration tool to upload HR data into SAP.

Hi Dirk,
Thanks for the information, please do let me know whether SAP Data Service 4.2 is licensed or can be used with my existing SAP ECC license.
Regards
Amit

Similar Messages

SAP Master data migration tools

Hi,
I would like to know if any SAP standard tools which are available for all master data migration,Kindly share the same which is required for us now.
We have to migrate the data from legacy systems to SAP and we have to use only SAP Standard master data migration tools.
Kindly share the same.
Thanks and Regards,
Raveendra

Raveendra,
SAP migrates data from legacy system using standard tools like LSMW, BDC, BAPI. Under LSMW you will have Batch input, Batch recording, BAPI and IDOCs options. Depending upon requirement you can choose any one of them. BAPI is advisable instead of BDC method.
Also for utilities industry SAP has provided ISU Migration tool (EMIGALL).

Looking for Third Party SAP Data Migration Tools

Hi all,
I don't know if this is the right place but I was wondering if anyone can provide me a list or a link of the different third party SAP Data Migration Tools. I am specifically looking for productions that migrate data from one SAP system to another.
Thanks and I hope to hear from you.
Regards

Hi,
Just to weight out my options and compare the diffrent products as a research of sort.
For SAP tools they use LSMW I believe but I want to check the alternatives.
Regards

Backoffice methodlogy and data migration tool

Anybody know about backoffice methodology?This methodology was developed by backoffice associates.I would like to know more about it.
see the link below
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ad903bcc-0901-0010-25bd-a0e5aebcf2b0
If anyone know please help.
Message was edited by:
abi baski

So, I loaded my CUCM with 6.1.4 which is absolutely compatible with UCCX 7.0.1 and I still get the same error which is as follows: Data Migration is only supported on CUCM Deployments. I am using the Data Migration Tool for 4.0.5 to 7.0.1 UCCX deployments. All necessary services are started on the CUCM and the UCCX license and CUCM pass validation. I am at a loss as to why I am getting this error. Does anyone have any ideas?

Data Services as a data migration tool

Hello All,
Has anybody used Data Services as a data migrition tool from a SAP ECC system? If so what is it like to use and are there any documents on this?
Cheers,
Nick.

Hi Nick.
About documents, here are some of them, but one that I think it could be useful for your understanding is the "BI109 SAP Data Migration" session: http://www.sdn.sap.com/irj/scn/shop?rid=/media/uuid/c08b931e-2a83-2c10-2aba-cb3968c5bc4e.
It shows the data migration framework based on SAP BusinessObjects technologies for legacy to SAP and SAP to SAP migrations.
More technical documents, showing how to set up iDocs, LSMW, etc:
http://help.sap.com/bp_dmg603v1/DMS_US/Documentation/DM_installation_guide_EN_US.doc
http://help.sap.com/bp_dmg603/DMS_US/Documentation/DM_Quick_Guide_EN_US.doc
Regards,
July

Data Migration tool from legacy file sys to iFS

Is there an existing tool used for
data migration from a lagacy file system
to iFS?
Thanks in advance for any sugesstions..
Elvis...

Hi Elvis,
Not at the moment, but I'll be happy to log it as an enhancement request for the future, please post your requirements for more details.

Data migration tools in sap

hi,
i am newbie to s.a.p nd i got ma project related to data migration. we are taking data from legacy system to sap database. we are using a tool called cransoft. what about the future of this tool. how to plan my career in this data migration.need help from experienced persons. im a sap abap resource actually. im having practically no work using abap in this project.im very much concerned about ma career.help me out...
thank you

>>will my career depend on the tool im working in or it depends on data migration only
That is something which depends upon how much and what kind of experience you have, if you are an expert in one tool, then your career basically depends on it, but if you understand the concept and have good experience in multiple tools, then you will have broader domain.
In consulting, it is much easier to be an expert in one tool, you are not tied to one client and can find project somewhere else.
But if you are a permanent employee, then it helps to adjust your skillset as per the changing environment.
Having said that, you don't have to go after every tool in the market, try to diversify as per your interests and the market need.
Talking specifically about BODS, i have seen quiet a few clients using or planning to use it so its future looks bright, but then again, future can always change.
Thanks
Aamir

Data Migration Tool

Has Oracle a tool for data migration? - source and destination are Oracle databases with different structures.
George

yes it is possible , post the structure of the both the databases. you can use import/export

TR History Data Migration Tool in ECC 6.0

Hi,
Is there any tool is ECC 6.0 to migrate old 4.6C transaction data in to ECC 6.0?
We want to configure a new ECC 6.0 system with TR-TM and migrate all transaction data from old system 4.6C to ECC 6.0. All configuration of 4.6C in TR-TM and FI-CO will be maintained in ECC 6.0
Please advise if you know any such tool in ECC 6.0
Thank you.
With Kind Regards,
Naresh B. Pandya

Hi,
Got it. I have done a similar project from 4.0B to 4.6C a few years back and it was painful, as there were no tools available.
In ECC6, SAP provides an elaborate set of tools, however the process will still be painful, as you would first need to customise your ECC6 box as per 46C customisation, but there will be a difference in customisation due to the fact that FSCM is now used for Treasury, where position management and business parters are handled very differently.
The 46C data will now need to be treated as legacy, the only benefit will be that data availability in the form you want will be easy.
After you activate the extension EA-FS as suggested earlier, you will see the node for Financial Supply Chain Management in the IMG. Navigate as below for the data transfer process:
Financial Supply Chain Management ->Treasury and Risk Management->Transaction Manager->General Settings->Tools->Legacy Data Transfer
You will need to refer to the IMG help and the link below for help.
[Legacy Data Transfer|http://help.sap.com/saphelp_erp2005/helpdata/en/56/d880392c58ab54e10000000a114084/frameset.htm]
Cheers.

Data Migration Tool - Loading C4C Accounts

Hello gurus
Our scenario includes our C4C tenant connected to CRM OP via PI/PO with integration built and tested for Accounts and other objects.
When we manually create an account in C4C, it replicates correctly to CRM OP. And we assume that if we use C4C DM tool to account load data in C4C, then it would automatically trigger WSs to send corresponding data to CRM via PI/PO the same way as it does successfully for manually created transactions.
Is there a limitation that anyone is aware of that will not allow data created via DM tool to be replicated to OP systems.
Let me know your thoughts please.
Regards
Jai

Hi Ginger
Thanks for the reply back. I am of the same opinion as well that it should work. It should be no different than say ERP to CRM (and reverse) connetivity scenario via CRM middleware where we upload the data in one client and then it gets processed on the slave system automatically.
However in our C4C case, when we are using the DM tool for accounts, the behavior is inconsistent and it does not even generate the Web service that we can view and monitor in Admin facet. So nothing is getting passed to PO to be sent to CRM OP. I did see that BP relationship via DM tool generate a message in WS monitor. I am assuming the CAs that would be triggered for loading data via DM tool will be no different than say if we were to create the data manually in C4C.
Any way we could run a trace on data loaded via DM tool to see where the hang up may be?
Thanks Ginger.
Jai

Error in Data Migration tool when issuing a ReadAll Role

Hello,
I am able to use the DMT for Read AccessProfile, Read PickList, etc.
Unfortunatelly when trying a ReadAll Role or ReadAll PageLayout I do get an error.
At the console, just after the command msg:
An error Occurred while connecting to Oracle CRM On Demand Server: https://secure-ausomxxxx.crmondemand.com/Services/cte/PageLayoutFieldService.
Log file just shows:
06/12/2010 09:20:37 com.siebel.occam.odesa.utils.Config initialize
INFO: Loading configuration file...
06/12/2010 09:20:37 com.siebel.occam.odesa.cte.ODESARequestHandler sendReadAllRequest
INFO: Operation: ReadAll
I am using a user with Administrator role so has all the privileges needed. No proxy for internet connection.
I have opened a SR at customercare... but if anyone has some idead, I´d appreciate.
Txs.
Antonio

For the benefit of all, I´ve found the trouble.
Those functions are for R18 and my system is still at R17.
Antonio

Data Migration Tool: Error Code: 100000001

Hi,
We installed DTW in a new system with SAPB1 client. and we got an error of:
Connection to (server IP) has failed
Error Code: 100000001
Connection with License server failed.
But, in other workstation the DTW is working fine.
Regards,
IAN

hi,
Copy server name from current server in choose company and paste it in DTW log in - Server.
Tick mark choose database,Select DB Type,DB user,DB password,
Enter User Name,Password,Tick windows authentication,Select Language,finally Click Refresh,Click Ok.
Jeyakanthan

How can we do the data migration between Oracle Applications and SAP R/3.

Hi All,
How can we do the data migration between Oracle Applications and SAP R/3 system.What are all the possible ways to move bulk data from Oracle Apps to SAP r/3 system.
Provide any 3rd party tools which supports data migration and also pls rpovide the SAP's own data migration tools with supports the above feature.
Awaiting for best possible solution.
Thanks in advance.
Regards
Dharmaraju

the 3rd party tool is ETL , you can use ETL tool and the prepare the load files then you can use LSMW method to upload the data to SAP.

Error in Data Migration

Hi Experts,
We are Trying to upload Journal entry datas from SAP Business one Data Migration Tool.
We have maintained Header and Item Templates.
But System is giving a error which is having following Description.
Key JdtNum iS Too short,error 65171.
Can anyone please help us in overcoming the problem?
Thanks in advance

Hi Ravi,
Please check this thread to have some ideas:
Re: DTW journal entry problem for many line accounts
Thanks,
Gordon

LSMW data migration porcess from the beginning

Hi gurus,
I do understand that there are 14 steps to be completed during migration, but can anyone give me a basic idea as what needs to be done prior to the above steps when starting a data migration project, as i have been only involved in the LSMW(14 steps) process before.
Thanks in advance, points will be awarded for all answers.
Ganga

Hello
As an intro:
Classical data migrations are typically limited to master data and
tend to cause multiple negative impacts on workflow and oper-
ating business units.
To minimize costs, risks, and effort during a data migration and ensure a smooth changeover for operational business processs items, and better reporting
capabilities SAP recently come with a Data Migration Solution called SAP Accelerated Data Migration tool.
This advanced tool, coupled with support from the SAP Services organization and SAP partners, lets you easily migrate and integrate application data from any legacy system into SAP applications and reduce migration costs significantly.
Data migration is done in 4th phase i.e. the final preparation stage of ASAP methodology.
As far as LSMW is concerned, BDC and LSMW both are use for loading data into SAP system. The difference is ,LSMW is loading tool by SAP where you can use various methods to upload, massage data or cleansed your data while loading into SAP from legacy system. The method can be BDC, BAPI, Idocs or SAP ABAP codes. Usually in BDC the user has to write an ABAP program or use other utility to load legacy data.
LSMW has been developed mainly for the Functional people who has no knowledge of the technical aspects of report or BDC in ABAP because its very user friendly and handy to use. So, simply they can upload the master records using LSMW.
Reg
assign points if useful

HR Data Migration Tool

Similar Messages

Maybe you are looking for